Interchangeable jaws

unbekannt Breite 20 mm

Condition: used, Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: for three-jaw lathe chucks, soft Kodpfx Ajtigxbjh Noll -Jaw width: 20 mm -Dimensions: see photos -Total dimensions: 85/60/H40 mm -Total weight: 1.0 kg

Condition: used, Year of construction: 2020, machine/vehicle number: T57F0019080055255, fuel type: diesel, power: 65 kW (88.38 HP), motor manufacturer: -, Field of application: Construction Empty weight: 83 kg Kjdpfxotr Ivws Ah Njll Generator capacity: 8 kVA Transport dimensions (LxWxH): 0.68x0.55x0.55 Please contact PFEIFER GROUP for more information

Condition: used, Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck, soft -Jaw width: 20 mm -Dimensions: see photo technical drawing Kljdpfx Ahet Hmkae Nol -Total dimensions: 66/60/H44 mm -Total weight: 1.0 kg

Condition: used, Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set Klsdpfx Aeq Exiljh Nel -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 20 mm -Dimensions: see photo technical. drawing -Total dimensions: 66/60/H43 mm -Total weight: 0,8 kg

Condition: good (used), functionality: fully functional, turning diameter: 655 mm, turning diameter over bed slide: 655 mm, turning length: 5,000 mm, Swing diameter over bed 655 mm Ksdsw N D T Sspfx Ah Njll Swing diameter over support 390 mm Turning length 5000 mm Spindle bore 82 mm Spindle speed 9-1120 rpm Feed rate 0.049-3 mm/rev Total connected load 12 kW

Condition: used, Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck, soft -Jaw width: 20 mm Kljdpfx Aet Acx Eoh Nel -Dimensions: see photo technical drawing -Total dimensions: 65/60/H50 mm -Total weight: 1.3 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set Kljdsq Rg U Eopfx Ah Nsl -Top jaws: Base jaws for three-jaw lathe chucks -Jaw width: 20 mm -Dimensions: see photo technical. drawing -Total dimensions: 79/60/H40 mm -Total weight: 0.8 kg

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, turning diameter over cross slide: 470 mm, turning length: 3,000 mm, turning diameter: 720 mm, spindle bore: 104 mm, CNC Lathe Geminis 4 Plus 720 x 3000 mm Description Manufacturer: Geminis Kledpfx Ajwuligsh Njl Model: CNC 4 Plus Control: CNC Fagor 8055 FL-BT Capacities: Distance between centers: 3,000 mm Swing over bed: 720 mm Swing over cross slide: 470 mm Spindle bore: 104 mm Tailstock diameter: 100 mm (Morse 6 taper) Bed width: 550 mm Speeds: 2 speed ranges: 0–1600 rpm Rapid traverse: X-axis: 8 m/min Z-axis: 8 m/min Motor: Power: 22 kW Weight: 8,000 kg Equipment: CNC Fagor 8055 FL-BT 3-jaw SHUNK Rota-S Plus chuck Ø 315 mm Additional 3-jaw chuck Fixed steady rest Chip conveyor General condition: Lathe in excellent condition

Condition: used, Interchangeable jaws, top jaws, three-jaw chuck, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 20 mm -Dimensions: see photo techn. drawing -Total dimensions: 70/60/H55 mm -Total weight: 1,2 kg Kodpfxsq Ei Ege Ah Njll

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck, soft Kljdpfx Ahowb Dkcs Nol -Jaw width: 20 mm -Dimensions: see photo technical drawing -Total dimensions: 65/60/H46 mm -Total weight: 1.1 kg

Condition: new, functionality: fully functional, Year of construction: 2026, control type: manual, working width: 2,000 mm, bending angle (max.): 135 °, sheet thickness steel (max.): 1 mm, back gauge adjustment: manual, overall weight: 540 kg, total length: 2,400 mm, total width: 850 mm, total height: 1,175 mm, Finger setter with segmented top clamp PNEUMATIC CYLINDER !!! Including manual back stop Max. bending capacity over the entire working length ----- 1.2 mm Max. working length ----- 2000 mm Klsdpfsga T Dpox Ah Nsl Max. opening width ----- 30 mm Width of fingers ----- 38 | 38 | 50 | 50 | 76 | 101 | 127 | 152 | 203 | 254 | 254 | 254 mm Max. angle of attack ----- 0 - 135 Weight ----- 540 KG Width ----- 2400 mm Depth ----- 850 mm Height ----- 1175 mm

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws Kjdpfx Ajt Acv Reh Njll -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 20 mm -Dimensions: see photo technical drawing -Quantity: 1 set of interchangeable jaws available Price: per set -Overall dimensions: 70/60/H55 mm / 70/60/H54 mm Total weight: 1.1 kg/set

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws Kljdpet Acwbefx Ah Njl -Top jaws: Jaw set for three-jaw lathe chuck, soft -Jaw width: 20 mm -Dimensions: see photo technical drawing -Total dimensions: 65/60/H50 mm -Total weight: 1.2 kg

Condition: new, Year of construction: 2025, 0554 mm 370 mm 2000 mm 280 mm 104 mm 11 kW Kedpfx Ajwyd Tnoh Njll

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck, soft -Jaw width: 20 mm -Dimensions: see photo technical drawing Kedpfx Ast Acwuoh Njll -Total dimensions: 70/60/H55 mm -Total weight: 1.5 kg