Bolster plate

UNBEKANNT 3500 x 2250 x 445mm

Year of construction: 1990, condition: reconditioned (used), tangential grinding machine Brand: Jakobsen Model: 1432 Year: 1990 rpm: 1400 Grinding area: 800x400mm Ncodpfx Adjiv S Avo Nsl Table size: 1000x350mm Maximum load on table: 400kg Maximum piece height: 475mm Grinding wheel size: 350x50x127mm Heidenhain ND 221B height indicator. Magnet table 800x350mm electronic Selter with magnetization regulator. Maximum distance between table and grinding wheel: 650mm MONNET brand filter of the year 2007 Includes sets of wheels (See photos).

Condition: used, Year of construction: 2008, Swing over bed 923,8 mm Swing over cross slide 755 mm Max. turning diameter 356 mm Max. turning length 510 mm X/Z-axis movement 260/590 mm Turret w/12 stations Spindle speeds 5000 rpm Spindle bore 73 mm Control: MSX-850 III Equipped with: Collet chuck w/collets Chip conveyor Ncedou Sn Hzjpfx Ad Nel 3 standard tool holders No Gantry loader incl.

Condition: new, table length 2200 mm table width 1500 mm Ncodpsvn U D Isfx Ad Njl stroke height 1900 mm weight max. in kg 3000 kg total power requirement 1,5 kW stroke speed - idle stroke upwards 55 sek. stroke speed - idle stroke downwards 30 sek. connected load frequency 400 V weight of the machine ca. 0,650 t dimensions of the machine ca. 2,2 x 1,5 x 0,3 m The hydraulic lifting tables are electrically driven and operated. Have a contact strip for safe lowering operation. Wide applicability for workshops, assembly departments, loading pits, etc.

Condition: used, plate width 2510 mm plate depth 5135 mm plate height 345 mm Njdpfx Aehpvavod Nocl weight ca. 10 t required space 2,5 x 5,1 x 0,38 m

Condition: reconditioned (used), Year of construction: 1992, functionality: fully functional, center height: 150 mm, grinding length: 620 mm, center width: 680 mm, grinding wheel diameter: 350 mm, total width: 500 mm, Condition of the machine: The machine is currently in a used, non-overhauled condition. The following work carried out on the machine: - Complete disassembly of the entire machine except for the guides - Replacement of all sealing and wear parts of the entire machine - Replacement of the infeed spindle of the X-axis - Replacement of the main bearing of the workpiece spindle - Replacement of grinding spindle - All machine assemblies are restored to as-new condition Geometry: - Scraping of the X-axis guide - Scraping the Z-axis guide - Grinding the X-axis table - Grinding the Z-axis table - Grinding the upper tables - Grinding of the assembly housing (workpiece headstock, grinding headstock and tailstock) - Creation of measurement report for TSCHUDIN cylindrical grinding machine Ncjdpjrz Nfljfx Ad Nol Painting: The main assemblies are repainted, the rest of the machine retains the original paintwork Electronics: The complete electronics of the machine are checked, tested and defective switches and cables are replaced

Condition: used, Year of construction: 2004, MORI SEIKI MT 2000 SZ TURN MILL CENTRE MAKE MORI SEIKI MODEL MT 2000 YEAR 2004 CONTROL MSG 501 SWING OVER CROSS SLIDE 599.5 mm SWING 749.0 mm CHUCK SIZE 250.0 mm DISTANCE BETWEEN CENTRE 1280.0 mm MAX. CUTTING DIAMETER 548.6 mm MAX. CUTTING LENGTH 1018.0 mm BAR CAPACITY 63.5 mm C AXIS 0.001 DEGREE SPINDLE RANGE 4500 rpm SPINDLE MOTOR 20 hp SPINDLE NOSE A2-6 SUB SPINDLE BAR CAPACITY 43.18 mm SUB SPINDLE MOTOR 10 hp SUB SPINDLE SPEED 6000 RPM TOOL CHANGE CAPACITY 60 STATION TURRET 12 STATIONS TRAVEL B AXIS +/- 120 DEGREE Y AXIS +/- 78.7 MM PLUS CNC BARFEED PART CONVAYOR Njdpfeuq Iwpsx Ad Nscl TOOL SETTING PROBE Y AXIS HIGH PRESSURE SWARF CONVAYOR FULL SET OF MANUALS GOOD RANGE TOOLING

Condition: used, Year of construction: 2002, x-travel 3200 mm y-travel 800 mm z-travel 600 mm spindle taper SK40 turning speeds 50 - 12000 U/min no. of workpieces in the magazine 30 Stück table surface area 3900 x 750 mm rapid travel x/y/z 12/12/12 m/min Ncodpfx Aov S Irted Njl total power requirement 29 kW weight of the machine ca. 15000 kg dimensions of the machine ca. 7200 x 3500 x 3100 mm CNC traveling column machining center Hedelius Equipment: - Chip conveyor - 30-position tool changer - Heidenhain CNC control iTNC 530i - High-pressure belt filter system - IKZ 15 bar - SK40 mounts - Operating instructions The following repairs were carried out in 07/2022: - X-axis guide carriage - Various pneumatic hoses - Safety glass on loading doors - Various push buttons with indicator lights - Door safety switches - X-axis cover (slats) - IKZ filters (4 pieces) - Filter cabinet - Z+Y-axis toothed belts - Door scrapers with dampers - Hose for external cooling, spindle cooling, and spray guns (2 guns) - Set of coolant nozzles for external cooling - 2x falcon bars for the Y-axis - 1x set of door rollers with rail (6 meters) - 1x Klüber grease with cone reamer

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, 2 used CNC lathes with Y-axis and two spindles Machines including loader and accessories (tool holders, jaws, etc.) For technical data, see the PDF file Ncsdow N R Nyepfx Ad Njl

Condition: new, BRAND NEW ROTARY TABLES / INDEXING TABLES Working position: vertical – horizontal Applications: positioning – stepless rotation // interpolation Rotary table faceplate diameter: 500 / 600 / 800 / 1,000 / 1,200 mm – Clamping surface can also be square – Max. workpiece weight (horizontal): up to 20,000 kg Max. workpiece weight (vertical): up to 4,000 kg Ncsdpfem Tvz Djx Ad Njl Positioning accuracy: ± 3 arc seconds Integration into machines with HEIDENHAIN or SIEMENS controls. Only inquiries from Germany will be answered /// Only inquiries from Germany will be processed.

Condition: used, Year of construction: 1988, plate width 2000 mm plate depth 3500 mm plate height 270 mm weight 5,5 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++ Ncjdpfx Aeiiii Ssd Nel