Labeling laser marking station

Trumpf TruMark 3000

Condition: good (used), Year of construction: 2001, functionality: fully functional, Grinding wheel 508x254 (305) mm, regulating wheel 330x254 (305) mm, regulating wheel speed 0-115 rpm, grinding wheel rotation speed 45 m/sec, grinding diameter 2-150 mm, grinding wheel drive 45 kW, machine weight 6.5 tons, space requirement approx. 3.0x1.5 m The machine will be equipped with a new Siemens S7 control system with new control panel, dressing quill SS electrically controlled via servo motor. Machine will be completely checked, defective parts repaired or replaced. Various options possible (KM system, infeed/outfeed, workpiece rulers etc.) Iedpfx Ajuy Ifgsh Njtb

Condition: ready for operation (used), Year of construction: 2003, Weiler E50 x 1000 precision lathe (2003) Manufacturer: Weiler Type: E50 x 1000 Itjdpfjxd Tikjx Ah Nsb Year of manufacture: 2003 Condition: good, used, under power Operating hours: 43.000h Technical data see pictures. Included in delivery: - Original documentation - Rota S Plus 250-62 - Bezel - Parat 4 compartment tool turret

Condition: good (used), Trumpf Vectormark Type: VMc2 Trumpf Vectormark laser marker with Fuchs extraction and filter devices Trumpf Vectormark GREEN 532nm Trumpf VMc2 Laser marker, with frequency-doubled diode-pumped Nd:Yag laser with Hurryscan 10 - Galvo head from Scanlab Fuchs extraction and filter devices TKFD Itsdpjciz Iyofx Ah Neb The integrated pre-separator ensures the high filter capacity Different filter levels are possible and can be perfectly customized Ideal for confined spaces - can be placed under a table or integrated into machines Welding fume separation class W3, IFA certified TKFD can also be transported in the trunk without modification Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is reserved!) We will be happy to answer any further questions you may have over the phone.

Condition: used, Technical details: turning diameter over bed: 570 mm turning diameter over support: 340 mm turning length: 1000 mm switched on hours: 37917 h centre distance: 1000 mm swing diameter over bed: 570 mm swing diameter over face slide: 340 mm centre height: 280 mm spindle bore: Ø 66 mm Itodpoxg Nhnofx Ah Nsb revolution per minute: 1 - 625 steples U/min max. torque on the spindle: 1600 Nm longitudinal feeds:: 0 - 20 mm/U cross feed: 0 - 20 mm/U tailstock quill adjustment:: 160 mm tailstock quill: MK 5 mm total power requirement: 20 kW weight of the machine ca.: 3,2 t dimension machine xH: 2,9 x 2,28 x 1,8 m Machine has been overhauled/refurbished: Ball screw Z overhauled, X-axis end position overhauled, new paint job. Conventional design with integrated automatic cycle control. Metric thread cutting, inch threads, DP threads. Chip conveyor not available. 4-jaw chuck with steady rest available. 3-jaw chuck mounted. *

Condition: good (used), Trumpf HAAS Type: HAAS Laser HL556D Laser light wavelength: 1064nm Minimum power: 5 W Maximum power regulated: 550 W Beam parameter product: 25 mm-mrgd External dimensions: width 1250mm, height 1580, depth 720m Power cable with plug: Length: 5.5 m Plug: CEE round plug, 5-pin 63A-6h Cooling water hoses: Connections for supply and return: 1 inch The hoses are plugged onto the connections and sealed with Isdpfx Asc Tk Iysh Netb 2 hose clamps each. Electrical interfaces: Serial interfaces for service purposes Ethernet interface for operating PC Interface of the analog input card ASV interfaces for safety circuits Output for measured values of the laser power Interface for connecting the control panel Emergency stop interface Electrical connection values: Mains 20-01-37-00 400 V ± 10%, 3P + PE, 50 Hz 20-01-38-00400 V ± 10%, 3P + PE, 60 Hz Scope of delivery: (laser system, laser head and replacement cable ...) (Changes and errors in the technical data, information are reserved!) We will be happy to answer any further questions you may have over the phone.

Condition: used, Year of construction: 1973, machine/vehicle number: 104530, pression: 100 t throat: 350 mm table size: 690 x 840 mm clearance hole in the die: 160 mm Ø tappet area: 450 x 600 mm tappet adjustment: 80 mm stroke adjustment: 8 - 100 mm number of strokes: 60 /min engine: 380 V, 5,5 kW space needed: 1850 x 1850 x 2650 mm weight: 6800 kg Ijdpfx Ahjddhw Sj Notb

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, overall weight: 2,500 kg, total length: 4,200 mm, total width: 2,500 mm, total height: 2,170 mm, travel distance X-axis: 390 mm, controller manufacturer: Siemens, controller model: 840D sl + ShopTurn mit „manual machine“, turning diameter over cross slide: 370 mm, bed width: 433 mm, center height: 315 mm, center width: 2,000 mm, quill diameter: 100 mm, quill stroke: 200 mm, rapid traverse Z-axis: 8 m/min, rapid traverse X-axis: 8 m/min, spindle bore: 140 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 2 rpm, turning diameter over bed slide: 630 mm, Equipment: rotational speed infinitely variable, Swing over bed: 630 mm Center distance: 2000 mm Maximum speed range: 2500 rpm Spindle power (100% duty cycle): 20 kW (AC drive) Spindle mount: Camlock D11 Spindle bore: 140 mm Included equipment includes: - 8-station SAUTER VDI-40 turret - Movable control panel along the entire length - Chip conveyor - Siemens AC servo motors - Siemens power supply and amplifier modules - Automatic (or via M function) gear change (2 speeds) - Machining area covered by two sliding doors - Operating mode 1 and operating mode 2 (setup mode at 5 rpm) - Siemens 840D sl ShopTurn control system with "manual machine" - 15-inch touchscreen format 16:9 - With manual machines, cycles can be executed without creating a program header. - Siemens control option: residual material detection. - Absolute encoder (i.e., no reference point travel required). - USB interface on the control panel. - Manual tailstock with drag device and 100 mm spindle diameter. - Automatic central lubrication. Itedpfx Aewgbuijh Neb - Coolant system.

Condition: ready for operation (used), Year of construction: 2020, A Panasonic laser marking machine (laser marking station) with a defective laser head is available. Travel X/Y/Z: 500mm/430mm/350mm, marking range X/Y/Z: 720mm/430mm/350mm, machine dimensions X/Y: approx. 800mm/1900mm. Documentation available. On-site inspection is possible. Itodev Rfqqspfx Ah Nsb

Condition: like new (used), Year of construction: 2023, operating hours: 800 h, functionality: fully functional, machine/vehicle number: SN3128158, turning diameter over cross slide: 533 mm, turning length: 572 mm, spindle bore: 63 mm, spindle speed (max.): 4,000 rpm, New condition + tooling + bar fender Iodpevwz T Usfx Ah Nstb

Condition: used, Year of construction: 2016, Laser type: PowerLine F100 Iodpfxjxqp Rdj Ah Njtb Technical data: Travel distances of linear axes X/Y/Z axis: 800 / 300 / 300 mm Max. workpiece weight: 30 kg Heating, Ventilation, Air Conditioning: Operating temperature: 25°C +/- 10°C Storage temperature: 5°C to +40°C Ambient conditions: non-condensing, non-corrosive, frost-free Air electrical section: 160 m³/h Pneumatic supply: Medium: filtered, oil-free compressed air Max. permissible operating pressure: 6 bar Temperature range: -10° to +60°C Laser safety class: Laser Class 1 according to EN (IEC) 60825-1:2007 Marking field size of the laser: 120 x 120 mm Operating and storage conditions: Floor load capacity: min. 500 kg/m² Clearance above: 2 m for ventilation Transport height: min. 2 m Room height: min. 2.50 m Electricity: Input fuse (protection): 3 x 16 A Nominal voltage: 400 V (+/-10%); 3P; N; PE Nominal frequency: 50/60 Hz; neutral conductor loaded Power consumption: 4 kVA (at 50 Hz) Size and weight: Width1): 1.50 m plus swivel arm max. 0.8 m (width without monitor) Length1): 1.80 m plus swivel arm 0.5 m (length without monitor) Height standing workstation: 1.20 m Working height: 0.96 m (standing workstation) Required space and volume 2): Width: 3.00 m Length: 2.50 m Height: 2.20 m (standing workstation) Area: 7.50 m² Weight, approx.: 1500 kg 1) Width, length, and area of the laser processing machine may vary depending on the adjustment of the optional swivel arm. 2) The necessary space and volume do not include potential aisle space! The operator must define the safety distances around the machine in accordance with national occupational health and safety regulations. Operating and storage conditions: - No direct sunlight - Do not place near radiators - Avoid strong temperature fluctuations - Do not install in areas with high dust levels - Do not install in areas with high levels of oil, solvent, or cleaning agent vapors