Stocking spare parts

Trumpf

Condition: ready for operation (used), Year of construction: 1998, Functionality: fully functional, Laser power: 2,400 W, Sheet thickness aluminum (max.): 8 mm, Sheet thickness steel (max.): 15 mm, Travel distance X-axis: 3,000 mm, Travel distance Y-axis: 1,500 mm, Travel distance Z-axis: 115 mm, Reason for disposal: Stock clearance - collection must take place by 30.09.2024 Machine is sold with an additional laser cutting unit! Functionality/condition: functional until dismantling TECHNICAL DETAILS X-travel: 3,000 mm Y-travel: 1,500 mm Z travel: 115 mm Workpiece weight: max. 710 kg Control: based on Sinumerik 840D Axis parallel/simultaneous speeds: 60 / 85 m/min Cutting speed: 3 m/min Path dimension: 0.01 mm Position deviation: ± 0.10 mm Position spread: ± 0.03 mm Laser: TLF 2400 turbo Laser power: 120 - 2400 W Wavelength: 10.6 µm Laser mode: TEM00 Frequency: 0.1 - 10 kHz Cutting gas: Oxygen O2 Sheet thickness aluminum: 1 - 8 mm Sheet thickness stainless steel: 1 - 2.5 mm Sheet thickness steel: 1 - 15 mm MACHINE DETAILS Space requirement: 9.3 x 4.6 x 2.0 m Weight: 11.5 t Compressed air connection: 6 bar Rated voltage: 400V / 3~ / 50 HZ Control voltage: 24 V Connected load: 71 kVA Total power requirement: 28 kVA EQUIPMENT No2B8Sss - Insert for medium formats 1500 x 1500 mm - Air conditioning unit Riedel L15/21 TR2 15.00; refrigerant R22 - VARIO T 1.5 panel filter - Machine is sold with an additional laser cutting unit

Condition: ready for operation (used), Year of construction: 2011, Operating hours: 12,748 h, Functionality: fully functional, Punching force: 22 t, Workpiece length (max.): 1,550 mm, Workpiece width (max.): 3,050 mm, Sheet thickness (max.): 8 mm, No reserve price - guaranteed knockdown to the highest bidder at the end of the auction! Trumpf TruMatic 7000 - 1600 (large format) with additional equipment and automation AUTOMATION - SheetMaster with peeling system including positioning aids for large format + first additional package with 9 suction cups, incl. vacuum ejector - Unloading monitoring - GripMaster large format - SortMaster pallet sorting function on four pallets C0Ojz8E9Fm TECHNICAL DETAILS Control system: TRUMPF Rexroth IndraMotion MTX Punching work area: 3,050 x 1,550 mm Laser working area: 3,050 x 1,550 mm Combined working area: 2,500 x 1,550 mm Control system: Siemens Sinumerik 840 D Laser power: 3,200 watts Wavelength: 10.6 µm Sheet thickness: 8 mm Workpiece weight: max. 280 kg Punching force: 220 kN Active blank holder: 4.5 - 20 kN Linear magazine: 21 tools with 4 clamps Programmable chute: 500 x 500 mm Positioning speed X / Y / simultaneous: 100 / 60 / 116 m/min C-axis punching: 60 rpm C-axis thread forming: 180 rpm Punching stroke sequence: 1200 rpm Stroke sequence marking: 2800 1/min Position deviation: ± 0.10 mm Position spread: ± 0.03 mm MACHINE DETAILS Length: approx. 10.5 m Width: approx. 9 m Height: 2.5 m Blasting time/laser switch-on time: 12,748 h Machine switch-on time: 87,844 h Operating voltage: 400 V / 50 Hz Compressed air connection: 7 ± 1 bar Laser gas consumption CO2 / N2 / He: 1 / 6 / 13 l/h EQUIPMENT - Sturdy, easily accessible C-frame - Drives with maintenance-free three-phase motors - Foot pedal clamp closing - Ball tables - TASC 3 laser control - Jet pipe ventilation with compressed air - FastLine - FocusLine - ControlLine - NitroLine - SprintLine - ContourLine - FlyLine - PlasmaLine - Additional Xp and Yp axes - Electro-hydraulic punching head - Rotatable mono tool holder ADDITIONAL EQUIPMENT - TruFlow 3200 laser incl. LensLine and optimized standby - MultiTool function - Thread forming function - Marking/quick beading function - Engraving function - Deburring and rolling technology function - Active die - Spray lubrication Die incl. progr. lubricant container with level monitoring - Repositioning cylinder - Vibration-damped installation - Chip conveyor with tilting container - Brush tables with loading and unloading aid - Blow-out device for small parts

Year of construction: 2009, Condition: ready for operation (used), Main Drive Laser power 7 kW Movement X-Axis Movement 2000 mm Y-Axis Movement 4000 mm This TRUMPF TruLaser 5040 was manufactured in 2009. It is a CO2 laser cutting machine featuring a TruFlow 7Kw laser power and a cutting area of 2,000 x 4,000 mm. Ideal for precision cutting tasks, the TRUMPF TruLaser 5040 machine we have for sale represents a robust addition to any fabrication setting. Contact us for further details regarding this CO2 laser cutting machine. D7Vxtz0 Application Types Cutting

Condition: new, Year of construction: 1998, Back gauge: 1,000 mm, Sheet thickness steel (max.): 13 mm, Overall weight: 11,300 kg, Hydraulic guillotine shears Fab. EHT Type. ECOCUT 13-40 Year 1998 Technical data Make: EHT Type: ECOCUT 13-40 Year of manufacture: 1998 Cutting length: 4050 mm Sheet thickness: 13 mm (450N/mm°2) Motor power: 22 KW Cutting angle: 1 - 3° Dimensions: LWH 5.5 x 2.3 (plus 0.9 support arms) x 2.1m Machine weight: approx. 11,300 kg Equipment - Controlled back gauge 10 - 1000 mm (pivotable) - ELGO control - Angle fence - Support arms - documentation Ufijfhoyjj All information without guarantee. A demonstration is possible at any time in our exhibition hall.

Year of construction: 2001, Condition: ready for operation (used), - USED - CO2 LASER CUTTING MACHINE WITH PALLET CHANGER X-AXIS TRAVEL: 3000 mm Y-AXIS TRAVEL: 1500 mm Z-AXIS TRAVEL: 115 mm WORKING AREA: 3000 x 1500 mm SOURCE: TLF 3000 TURBO ; 3000 W CONTROL UNIT: SIEMENS 840D WEIGHT: 11500 Kg OVERALL DIMENSIONS: 9800 x 5300 x 2000 mm Cjzycmke NOTE: WITH LIBELLULA SOFTWARE

Condition: used, Beveller, edges former, edges Broacher Trump Chamfering steel plates to the weld seam preparation Type TKF 103 Sheet thickness: 4-25 mm Helix length max: 10 mm Helix angle: 30° Power: 2000 Watt Power supply: 220 volts, 50 Hz -equipped with guide bracket for 30° Helix angle - nachschleifbarer shock steel for high tool utilization -multiple shock steels -Base plates 6, 8, 10, 12, 14, 16, 18, 20, 22 mm for different material thickness To the arrival angles of straight and curved edges with at least 40 mm radius. To the on sloping edges of flat and curved workpieces also pipes with an internal diameter of at least 80 mm. Weight: 14 kg 2Rcc7Y

Condition: good (used), Year of construction: 2013, Catalog No. : 7892 Type: TruLaser 8000 Producer: Trumpf Made in: 2013 Characteristic: Total hours: 43109 h Hours on: 28857 h Laser power: 6 kW Length of the working table: 8000 mm Ucm8Vrnuuv Width of the working table: 2500 mm Source: TruFlow 6000

Condition: good (used), Year of construction: 2004, Functionality: fully functional, CNC laser marking machine TRUMPF Vectormark VMC 3A Year of construction 2004 Control CNC PC controlled Technical data D7Vwqx8 4-axis engraving machine with rotary table for engraving rotatonic parts on the circumference With optical and movement systems as well as housing with suction and filter unit Weight 800 kg

Year of construction: 2002, Operating hours: 97,035 h, Condition: ready for operation (used), General Data Measurements width 2900 Measurements depth 3750 Measurements height 3100 Machine weight 18210 Gxcxoua Main Drive Stroke 365 mm Number of axis 6 Additional Equipment Including tooling This 6-axis TRUMPF Trumabend V230 press brake was manufactured in 2002. It features a bending length of 3000 mm, a stroke of 365 mm, and a force of 230 t, suitable for diverse bending tasks. With 97,035 hours and including tooling, the TRUMPF Trumabend V230 machine we have for sale is a robust choice for your metalworking needs. Contact us for further details regarding this press brake. Application Types Bending & Punching

Condition: good (used), Year of construction: 2002, Operating hours: 22,750 h, Pressing force: 320 t, Overall weight: 24,000 kg, Bending length: 4,080 mm, Hydraulic press brake Fab. TRUMPF Typ. TrumaBend V320 Year 2002, only 22,750 operating hours read off Equipment - Delem 2D graphic control Delem DA - Pneumatic die shifting - 2 movable support arms - Hydraulic tool clamping top and bottom - CNC controlled crowning - controlled axes: Y1, Y2, X, X1, R, Z1, Z2 - upper tool set 3500mm, straight H230mm, segmented - Die set 4000mm V8 30 degree (almost new) Technical details Make: TRUMPF Type: TrumaBend V320 Year of manufacture: 2002 Operating hours: 22,750h (read) Pressure: 320 t Bending length: 4080 mm Stand width: 3680 mm Projection: 410 mm Infeed speed: 150 mm/sec Retraction speed: 135 mm/sec Cccmlco Bending speed: 10 mm/sec Lifting height: 365 mm Installation height: 535 mm Space requirement: approx. 4.65 x 2.31 x 3.1 m Weight: approx. 24 t All data without guarantee. A demonstration is possible at any time in our exhibition hall.

Condition: used, Year of construction: 2011, laser capacity in Watt 2.000 plate dimensions -w x h 1250 x 2500 mm Max. sheet thickness 3 mm In our opinion, the machine is in very good used condition and can be viewed Ub8B0Yfpuv under power by appointment. Technical details: - Working hours: approx. 33,880 hours - Laser hours: approx. 33,411 hours Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Condition: good (used), Motorized plate shears make TRUMPF type OMS 450 Machine # 94278 Technical data: Cutting capacity 4.5 mm cutting speed up to 4 m/min. small radius to be cut 30 mm number of cuts per minute 1400 7N3H7Glu3O Power 1100 W power supply 380 V / 50 Hz weight approx. 100 kg outer dimensions 350 x 2500 x 1100 mm with - column used, in good condition

Condition: good (used), Year of construction: 2018, Catalog No. : 7891 Type: Trulaser 3060 Fiber Producer: Trumpf Made in: 2018 Characteristic: Total hours: 30834 h Hours on: 21175 h Laser power: 6 kW Length of the working table: 6000 mm Width of the working table: 2000 mm Source: TruDisk 6001 Fzjbwx0 Equipment: Load Master

Condition: good (used), Year of construction: 2012, The machine is in good technical condition, after previous agreement the possibility of testing. NC: 45916 Resonator: 46862 Beam zap: 29462 Ufd3Rcunkd

Condition: ready for operation (used), Year of construction: 2010, Operating hours: 30,720 h, Functionality: fully functional, Machine/vehicle number: A1220A0175, Laser power: 3,200 W, Type of input current: three-phase, Working range: 3,000 mm, Sheet thickness steel (max.): 20 mm, Power: 3.2 kW (4.35 HP), Sheet thickness (max.): 20 mm, Travel distance X-axis: 1,500 mm, Travel distance Y-axis: 3,000 mm, Travel distance Z-axis: 120 mm, Worktable length: 3,100 mm, Worktable width: 1,550 mm, Compressed air connection: 6 bar, Feed length X-axis: 1,500 mm, Feed length Y-axis: 3,000 mm, Feed length Z-axis: 120 mm, Year of last overhaul: 2022, Table length: 3,100 mm, Equipment: Cooling Unit, Documentation/Manual, Safety Light Barrier, I am offering a Trumpf Tru Laser 3030 (L20) with 3,2kW and 30720h beam. The machine is set up in Braunschweig in working order, so it can be demonstrated. It has a safety light barrier around the loading table. Sen8Cprxif

Condition: ready for operation (used), Year of construction: 1999, Pressing force: 50 t, Bending length: 1,270 mm, Stroke distance: 215 mm, Hydraulic press brake Fab. TRUMPF Typ. TrumaBend V50 Year 1999 Uebsqetojv Technical data: Trumpf Make: Trumpf Type: TrumaBend V50 Year of construction: 1999 Capacity: 50t Effective length: 1270 mm Stroke: 215 mm Operating pressure: 290 bar Overrun time: 53 mm Safety distance: 84 mm Voltage: 3 x 400V Rated current: 12.5 A Connected load: 8.0 kVA Compressed air connection: 6 bar Dimensions: approx. L 2.00 x W 2.00 x H 2.40 m Weight: 4750 kg Equipment - 2D graphic control: Delem DA - Pneumatic die displacement - Hydraulic tool clamping top + bottom - Controlled axes: Y1, Y2, X, R, Z1, Z2 - 2 support arms can be moved sideways - Tool package OW straight, approx. 28 degrees segm 1250mm UW H100, V8, 3 x 500mm All information without guarantee. The machine is in very good condition. A demonstration under power is possible at any time in our showroom.

Condition: used, Year of construction: 2022, table length 3000 mm table width 1500 mm Control Trumpf TruControl 1000 speed 140 m/min laser strength 4 kW In our opinion, the machine is in very good used condition. Technical data - TruFiber 4001: C93A0Ku - Max. laser power: 4,000 W - Max. sheet thickness stainless steel: 20 mm - Max. sheet thickness of mild steel: 20 mm - Max. sheet thickness aluminum: 20 mm - Max. sheet thickness copper: 8 mm - Max. sheet thickness brass: 8 mm Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Condition: good (used), Motorized plate shears make TRUMPF type OMS 353 Machine # 714426 Technical data: Cutting power 3,5 mm Bam70J9Zj9 Power 750 W Power supply 380 V / 50 Hz weight approx. 100 kg outer dimensions 350 x 2500 x 1100 mm with - column used, in good condition

Condition: like new (used), Year of construction: 2021, Operating hours: 11,602 h, Functionality: fully functional, Laser power: 2,000 W, Type of input current: three-phase, Total length: 16,150 mm, Total height: 3,000 mm, Total width: 6,450 mm, Workpiece weight (max.): 120 kg, Sheet thickness steel (max.): 8 mm, Overall weight: 14,360 kg, Pipe diameter: 152 mm, Equipment: Cooling Unit, Documentation/Manual, Safety Light Barrier, The system must be dismantled and loaded by the buyer. Ueyv9Gaxbz

Condition: excellent (used), Year of construction: 2009, Operating hours: 37,904 h, Functionality: fully functional, Machine/vehicle number: A0220A2524, Working range: 3,000 mm, Laser power: 3,200 W, Workpiece length (max.): 3,000 mm, Workpiece width (max.): 1,500 mm, Sheet thickness (max.): 20 mm, Sheet thickness aluminum (max.): 8 mm, Sheet thickness steel (max.): 15 mm, Equipment: Safety Light Barrier, laser trumpf 3030 3000x1500 working range two cutting heads 5 and 7.5" pcs pallet cleaning brush rci function external load/unload interface Hu3Nufw automation will not be provided

Condition: ready for operation (used), Year of construction: 2006, General Data Machine weight 1200 Main Drive Laser power 2 KW This TRUMPF LASMA 443 was manufactured in 2006. A robust laser cutting machine, it features a weight of 1200kg, a connected load of 2KW, and operates on a control voltage of 24V with mains between 380-460V / 50/60 Hz. Ideal for precision cutting, the TRUMPF LASMA 443 machine we have for sale is a valuable addition to any workshop. Contact us for more information. Dplvwt Application Types Cutting

Condition: excellent (used), Year of construction: 2001, Operating hours: 39,500 h, Functionality: fully functional, Laser power: 4,000 W, Sheet thickness aluminum (max.): 10 mm, Sheet thickness steel (max.): 20 mm, Travel distance X-axis: 3,000 mm, Travel distance Y-axis: 1,500 mm, Travel distance Z-axis: 115 mm, TRUMPF Trumatic L 3030 - 4 kw - Year 2001 TECHNICAL DATA: Make: TRUMPF Type: L 3030 - 4 kw Year of manufacture: 2001 Working area: 3,000 x 1,500 x 115 mm Control: Siemens Sinumerik 840 D Laser power: 4,000 watts Max. Sheet thickness mild steel: 20 mm Max. Sheet thickness stainless steel: 15 mm Max. Sheet thickness aluminum: 10 mm Operating hours: NC one 39,500 h (10.08.2024) Machine regularly serviced by TRUMPF! STANDARD EQUIPMENT: - Closed machine frame with integrated laser unit Laser unit: TLF 2000 high-frequency excited CO2 laser, maintenance-free turboradial blower, mirror telescope, cooling unit, logbook function - Automatic pallet changer - Longitudinal conveyor belt for small parts/waste - Drives: maintenance-free three-phase servomotors - Cutting head quick-change device - Laser cutting head with 5" lens and laser cutting head with 7.5" lens - Programmable cutting gas pressure setting - DIAS 3 height control and process control - AutoLas Plus automatic focus position adjustment - Laser power control - Position laser diode - HI-LAS high-pressure cutting - Fast processing with SprintLas - ContourLas for the production of small holes - PMS plasma sensor technology - Automatic sheet edge detection - Programmable power cycles - Microweld - Automatic switch-off - Work area lighting Ueovtgbxwj - Sinumerik 840D control system: open control system on PC basis, simple operation, online help, diagnostic functions, maintenance logbook, technology data, teleservice - Safety: multi-beam light barriers, beam guidance fully encapsulated and ventilated, monitoring system, multi-chamber extraction and compact dust extractor, protective cabin - 3.5" floppy disk drive - TFT color screen - Electrical equipment: Voltage 400 V / 50 Hz - Paint finish: Standard RAL 9002/5010 EXTENDED EQUIPMENT: - TLF 4000 laser incl. lens monitoring sensors

Year of construction: 1980, Condition: used, CNC punching and nibbling machine make TRUMPF type Trumatic 180 W make # 202008, year of manufacture 1980 Technical data: Punching force 205 kN cutting force 180 kN machining size 1000 x 2000 (with repositioning 3000) mm stroke length 15 mm number of strokes in continuous operation 280 max. sheet thickness 6 mm power input 5,5 kW max. positioning speed 45 m/min axis-parallel 60 m/min simultaneous nibbling speed 5.5 m/min Bgcgi728Yrb feed per stroke 20 mm at 280 1/min with running ram 5 mm at 420 1/min Accuracy of small programmable distance 0.01 mm entry tolerance + - 0,1 mm positioning spread + - 0,03 mm Connected load electrical 20 kVA outer dimensions of machine 4000 x 1200 x 2200 mm weight of the machine (without accessories) 8 t with - CNC control TRUMPF micro 5 TC - automat. tool changer type 9053H1 No. 355 - sep. control panel 800 x 1000 x 1450 mm - sep. control cabinet 600 x 2000 x 2000 mm - 1 table 1800 x 2000 x 1100 mm - 3 pallets accessories used, in good condition special price ex stock

Condition: used, Overall weight: 14 kg, Material thickness: 25 mm, Helix angle: 60 °, Welding edge former, TRUMPF type TKF 100 Machine # 702592 Bojutu2I7Rc Technical data max. sheet thickness 25 mm Bevel angle 15 - 60° max. bevel position at 40 kg strength 10 mm Max. working speed 2.5 m/min. Strokes per minute 500 Power 1900 / 1400 W Weight approx. 14.5 kg Power supply 220 V / 50 Hz Used, ready for use

Condition: used, Electr. beveller make TRUMPF type TKF 150 Machine # 784772 Technical data: Cfc7Norirs max. plate thickness 32 mm bevel angle 15 - 55 max. bevel position at 40 kg strength 15 mm max. working speed 1,25 m/min. strokes per minute 300 power 1900 / 1400 W weight approx. 21,4 kg power supply 220 V / 50 Hz used, in good condition