Thielmann 31AW - 1000-litre containers + Stirring

Thielmann 31AW

Year of construction: 2020, condition: used, Fabricant : Thielmann UCON Blodpfsy N Ec Njx Acnol Model : 31AW Type: 1000-litre container Year : 2021 Material: 304 stainless steel Heating and insulation between the outer shell and the tank Temperature sensor Stackable: yes Maximum pressure: 0.30 bar Weight : 328 kg Dimension : 120 x 110 x 200 cm

Condition: used, Winkworth PV1000 Jacketed Stainless Steel Tank Bsdpfx Ajwq Sdiscnoll Capacity 1000 Lts Complete with Winkworth mixer and ancillary equipment

Condition: new, Year of construction: 2024, functionality: fully functional, nominal power: 90 kW (122.37 HP), rotational speed (max.): 5,760 rpm, rotational speed (min.): 1,592 rpm, total height: 3,437 mm, total length: 3,275 mm, total width: 2,500 mm, type of cooling: air, compressed air connection: 6 bar, Equipment: rotational speed infinitely variable, The impact mills of the REKORD 212-630 series in the welded housing design are robust universal mills for demanding industrial applications in continuous operation. ● Size: 630 mm (nominal rotor diameter) ● Mill housing: Heavy-duty welded stainless steel housing, pressure surge resistant up to 10 bar (AISI316L), with product-contacting surface finish Ra ≤ 1.6 μm for easy cleaning, equipped with a pivoting door and safety interlock type HAAKE (key transfer system); monitoring of housing and bearing temperature, vibration monitoring ● Mill inlet: JACOB pipe; DN 150 mm Bedpfx Acsx Ac Rbonoll ● Mill outlet: Ground material and air discharge downward into a suction hopper, optimized for connection to the conveying line to the total separator ● Mill drive: Belt drive, three-phase motor, energy efficiency class IE3 (manufacturer SIEMENS), 90 kW, 3~ 400 V, IP55; suitable for operation with frequency inverter ● Sealing materials: Silicone; PTFE, sealing material conforms to EU and FDA food hygiene standards ● Grinding elements: Pin rotor: 4 pin rows, pin Ø 7 mm (wear-reduced); Pin stator: 3 pin rows without external pin circle, pin Ø 7 mm ● Bearings: Designed for toughest operational demands in continuous industrial service, heavy-duty bearing housings with temperature and vibration monitoring (early detection of potential bearing failure and avoidance of hot surfaces) ● Inert gas supply/monitoring for shaft seal on product chamber side ● Run monitoring to detect operating faults ● Machine frame: The complete unit – mill, drive with motor, tensioning rails, belt drive, and belt guard – is installed ready for use on a sturdy machine frame with height-adjustable machine feet Main components of the offered system include: ● Product feed/transfer from customer’s upstream process and transfer to a rotary valve (certified ATEX protection system); ● Industrial pin mill type REKORD 630-SSt with welded housing and ground surfaces; ● Product separator with discharge rotary valve (certified ATEX protection system); ● Pneumatic conveying line with air inlet/outlet, including suction blower; ● WITHOUT control system, without frequency inverter

Condition: good (used), functionality: fully functional, Year of construction: 2007, operating hours: 1,153 h, DYNO-MILL KD 6 Agitator Bead Mill (2007) For sale is a DYNO-MILL KD 6 horizontal agitator bead mill, manufactured by Willy A. Bachofen AG (WAB). This machine is a premium Swiss-made unit designed for the continuous dispersion and wet-grinding of pumpable products, ranging from low to high viscosity. This unit was manufactured in 2007 and decommissioned in fully functional, running condition with no known faults. It is distinguished by its exceptionally low usage history, having logged only 1’153 operating hours. It comes equipped with a high-wear-resistant Silicon Carbide (SiSiC) inner cylinder and hardened stainless steel discs. It is sold as a complete bundle, including a peristaltic pump, a tool kit, the original electric cabinet and yttrium-stabilized zirconium balls (used). Highlights • Low Usage: Only 1'153 operating hours—internal mechanics are in excellent condition. • High-End configuration: Fitted with a ceramic Silicon Carbide (SiSiC) inner cylinder (6mm wall thickness) and hardened stainless steel discs for durability and contamination control. Sintered Silicon Carbide (SSiC) prevents product overheating significantly better than Zirconium or Steel liners. • Ready to Run: Sold as a complete package including the Electric Cabinet and a Peristaltic Product Pump. • Features the industry-standard WAB dynamic gap separator and pressure-balanced mechanical seal. • Voltage: Fitted with a modern Danfoss VLT frequency converter featuring wide-range input (380-480V, 50/60Hz), making the machine immediately compatible with both European (400V) and US (480V) power grids without modification Technical Specifications • Manufacturer: Willy A. Bachofen AG (WAB), Switzerland • Model: KD 6 • Grinding Chamber Volume: 6.0 Liters (Net volume ~5.7 Liters) • Throughput: approx. 50 – 200 kg/h (dependent on product/viscosity) • Main Drive: 11 kW Motor (440V / 60Hz rated) • Separation System: Dynamic gap separator (Tungsten Carbide rotor/stator) with adjustable gap width (0.15–1.0 mm) • Shaft Seal: Double mechanical seal (DGD) with integrated pressure rinsing circuit • Cooling: Forced water cooling jacket for the grinding cylinder • Weight: 695 kg 
 Scope of Delivery • Mill: DYNO-MILL KD 6 base unit • Grinding System: Silicon Carbide (SiSiC) Inner Cylinder & Hardened Stainless Steel Discs • Feed Pump: Peristaltic Pump included • Controls: Original Electric Cabinet included • Grinding Media: Ceramic Beads, Zirconia Partially Stabilized with Yttria, four sizes, each approx. 25Kg (0.4 - 0.6 mm / 0.8 - 1.0 mm / 1.2 - 1.4 mm / 1.6 - 1.8mm) • Documentation: Operating instructions and wiring diagrams Condition • Mechanical: Excellent, running condition with no known faults at the time of decommissioning. • Cosmetic: The machine is clean but shows minor cosmetic wear (see pictures for visual details) • Last application: Food Typical Applications • Ideal for fine particle size reduction in industries such as: • Paints, Inks, and Coatings • Agrochemicals and Chemicals • Life Sciences and Microbiology • Food and cosmetics Blsdpfxsx Tdyzj Acnel We ship worldwide. If you are interested or have any questions, please get in touch! Can be inspected in Liestal, Switzerland.

Condition: new, COMPONENT PARTS: 1.) Sand bunker 2mc: -Volumetric dosing with conveyor belt - 1.5 kW motor -Vibrator 0.18 kW - Gravel bunker 2 m2 -Volumetric dosing with conveyor belt - 1.5 kW motor 2.) Electric control panel: „ Start/stop mixer „ Start sand conveyor- the conveyor will stop after the preset time from the time relay " Start gravel conveyor - the conveyor will stop after the preset time from the time relay „ Water quantity setting (digital display) 3.) MIXER, MX500 / MX300: -The tub is lined with an interchangeable jacket made of hardox sheet 4mm; -Padded bottom with removable wear elements (10mm) - Interchangeable mixing hoes made of hardox sheet -Protective net MX500: -Useful volume: fluid concrete 500 liters -Precast concrete: 350 liters -Productivity: 3.5 cubic meters of semi-wet concrete/ hour -Engine power: 11 kW (380V) Bsdpoiz Dl Iefx Acnsll -Dimensions: 1.70 x 1.70 x 1.40 m - Mass: 900 kg MX300: -Useful volume: fluid concrete 300 liters Precast concrete: 200 liters -Productivity: 2.4 cubic meters of semi-wet concrete/hour - Engine power: 5.5 kW (380V) - Dimensions: 1.40 x 1.40 x 1.40 m - Mass: 650 kg OPTIONAL PARTS: 1.) WEIGHING CEMENT: -Steel funnel with pneumatic opening; -Compressor; -Pneumatic vibrator; -Load cell; - Digital weight indicator - mounted on the electrical control panel. -Auger for cement (connects to the bulk cement silo of the client or at the silo provided by our company) -Mixer cover for blocking cement dust 2.) CEMENT SILO -Capacity: 24 cubic meters (30 tons of cement) -The silo is equipped with a ladder, a railing on the lid and a supply pipe with a quick coupler. -The silo is equipped with a filter, pressure release valve, level indicators, fluidizers and a butterfly valve on the discharge mouth. -Inner diameter 2500 mm; -The height of the cylindrical ferrule 4500 mm; -The height of the conical bottom 1700 mm; -Total height, including railing 8700 mm. - Net mass: approximately 3000 kg. THE MACHINERY ARE NEW. The warranty period for the machines is 12 months from delivery.

Condition: used, tank capacity: 15,000 l, For sale: 3 silos no longer needed. Blodpsx Iu N Ajfx Acnsl

Condition: new, Year of construction: 2023, functionality: fully functional, overall weight: 8,000 kg, Siemens Energy transformer Year of manufacture: 2023, new, not commissioned Incl. enclosure Bsdpfx Ajyw Tf Uscnoll

Year of construction: 2010, operating hours: 0 h, condition: like new (used), This used rotary feeder served only for spare parts storage for a foreign project and was therefore never in use. The rotary feeder therefore has no operating hours and is in mint condition. The used rotary feeder with square inlet is suitable for controlled feeding and dosing of powdered and granulated bulk materials from silos, hoppers, pneumatic conveying systems, filter systems and cyclones. Name: Used Rotary Valve Manufacturer: Sunds MDF Type: LAF-200 Year built: 2010 Material: regular steel Driving force: 11 kW Dimensions: L 3400 x W 2200 x H 2370 mm Empty weight: approx. 4500 kg Speed: 1475 / 22 Blodpfogw A Etox Acnel Condition: Used Technical documentation: no Message: inlet L: 1980 mm x W: 1180 mm, outlet L: 2180 mm x W: 1000 mm, 7 chambers. The rotary valve has no operating hours and is in mint condition. Price: on request

Year of construction: 2021, condition: new, 2021 INFINITY MT500-P MELTING TANK with auger/PUMP never used - new Bjdpfjwu A Ugox Acnell

Condition: excellent (used), 447 USED Automatic bulk raw material dosing system Reimelt. EQUIPMENT: - 4 internal silos for flour, - 6 tanks, silos for mixes or flour. - 6 tanks for micro-raw materials, - mixers, - pumps, - raw material transport pipes, - bowl dosing station (hopper), - flour catcher, - water mixer, - water cooler, - automation control, THE SET IS A COMPLETE INSTALLATION. Paid options available: transport of the device. Blsdpfxozxnttj Acnel Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.