221.000 ltr. GRP - flat bottom tank

Theodor Vanck Staffelstein

Condition: new, Year of construction: 2025, machine/vehicle number: 988906827, fully mobile concrete fuel station Frumecar Fastmix Gsdpfx Agohd I Smo Dsca * THE STRESSED GAS STATION * - Year of construction: New - 2-4 chambers with 7-14 m³ capacity - capacity: 14-25 m³-h depending on mixer size - mixer size: 0,5 m³ - 0,75 m³ -1,0 m³ - Concrete software from Siemens with self-service terminal and new barcode method and EC card terminal - concrete discharge conveyor 9m length - Cement silo 32 to. incl. cement screw conveyor - installation, commissioning and training incl. - 2 years warranty - Highest quality plant on the market. All components produced in produced. Electric motors and gearboxes from Siemens installed. Other plant components from the market leader VAM. Input errors and mistakes in this offer are expressly reserved. Only the specific agreements in the order confirmation or in the purchase contract are decisive. more construction machines and mixing plants on our website Further information Purpose: construction, Usable material: concrete, General condition: very good, Technical condition: very good, Visual condition: very good,

Condition: ready for operation (used), There are two pipe pasteurisers available, including storage tank, capacity: 7000l. Godpjgi Nxasfx Ag Doca

Condition: as good as new (ex-display), 1.000 m barely used HDPE dredge pipe with lose flanges 500 m used HDPE dredge pipe with fixed flanges Gcsdpfx Aef Tdn Ujg Dea

Condition: excellent (used), mileage: 16,330 km, fuel type: diesel, color: white, axle configuration: 6x2, fuel: diesel, gearing type: mechanical, emission class: euro6, Year of construction: 2015, Equipment: ABS, low noise, soot filter, spoiler, = Additional Options and Equipment = - Electric windows - Electrically adjustable exterior mirrors - Speed limiter - LED lights - Air suspension - Air horn - Fog lights - Particulate filter - Sun visor - Stability control - Toolbox - Power take-off (PTO) = Further Information = Drivetrain AdBlue system: Yes Axle configuration Maximum front axle load: 10,000 kg Rear axle 1: Dual tires; Max. axle load: 11,500 kg Rear axle 2: Lift axle; Max. axle load: 7,500 kg; Steered Weights Unladen weight: 17,420 kg Payload: 11,580 kg gross vehicle weight: 29,000 kg Functional Mast: Telescopic (12 sections) Mast length: 33.8 m Lifting capacity: 20,080 kg Lifting height: 3,380 cm Crane: COPMA 510.7 + JIB J4, mounted behind the cab Superstructure brand: COPMA 510.7 + JIB J4 CE marking: Yes Condition Technical condition: Very good Visual condition: Very good Financial Information Price: On request Identification Registration number: 01-BVF-9 SCANIA P250 6X2 + COPMA 510.7 CRANE + JIB J4 EURO 6 L PACKAGE 250 HP DRIVE 6X2 LAST AXLE STEERED AND LIFTABLE 10 TON FRONT AXLE WHEELBASE 370 CM AIR SUSPENSION CP14L CAB WITH LEATHER INTERIOR MANUAL TRANSMISSION Gsdpfx Agouxvpks Djca TOOLBOX ONLY 16,330 KM!!! COPMA 510.7 CRANE + JIB J4 OIL COOLER FOR CRANE HYDRAULICS 11X HYDRAULICALLY EXTENDABLE + 1X MANUAL MAX WORKING HEIGHT 33.8 METERS MAX LIFTING CAPACITY 20,080 KG MAX LIFTING CAPACITY AT 30.1 METERS 350 KG 4X OUTRIGGERS RADIO REMOTE CONTROL BALLAST PLATFORM WITH REMOVABLE ALUMINIUM SIDE PANELS 450 CM LENGTH LASHING EYES FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN WE SPEAK ENGLISH HABLAMOS ESPANOL

Condition: ready for operation (used), 100,000 liter stainless steel tank, insulated It has a heating coil running along the entire height of the tank Gcjdsn E N N Eepfx Ag Dja Wed. 3.15m Height 16.50m

Condition: new, *TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Load circuits: 1 or 2 as standard Temperature range: - 45°C to +130°C Medium: water / glycol mixture Dimensions LxWxH (without connections) : Gcsdsg Ezarspfx Ag Dea 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300kg 2-circuit: approx. 1500kg *HIGHLIGHTS EQUIPMENT: -Controls: Temperature control (standard) -Control via SPS with touch screen -Analogue and digital interfaces -Internal 2-circuit pump system (INFO: Ensures performance values even at low flow rates) -Heating control via solid-state relay (SSR) -Flow measurement in the internal circuit for flow monitoring (INFO: If the water/glycol mixture is incorrect, the system automatically warns and switches off in the next step) -Pressure-controlled cooling water regulator (INFO: Much more accurate than temperature controls) Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metal) (non-ferrous metal-free optional) All medium-carrying components and piping insulated for low-temperature application -Water-cooled condenser (air-cooled on request). *OPTIONS: -flow rate control: up to 100l/min, >4 l/min +/- 5% of measured value -Pressure control: 0.5 to 4.5 bar (control range) -compressed air monitoring -test piece emptying by means of compressed air - Cooling water monitoring -Limitation of inlet pressure -Other special options available on request and after technical inspection Visit our website for more details or for other performance classes. *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: ready for operation (used), Bitzer refrigerant compressors unit Type: HSK7461-80-40P (x3) Volume: 220 m3/h (x3) Cooling capacity for R404A: 560 kW at - 5°C/40°C, 477 kW at -10°C/40°C, 338 kW at -20°C/40°C Dimensions: 4500 x 1200 x 2300 mm Condenser Thermofin Type: X-TCH 100.1-25-B-N(D5/S5) Cooling capacity: 963/852 KW Air flow: 295 000 / 234 000 m3/h Number of fans: 10 x 1000 mm Dimensions: 9800 x 2300 x 1600 mm Volume: 229.3 L Weight: 1 929 kg Gcjdpfepgzhujx Ag Dsa Control panel Dimensions: 2400 x 600 x 2000 mm We have a lot of refrigeration equipment. Chillers, compressors, coolers, condensers, chillers, cold rooms, refrigeration and gastronomic furniture as well as machines and devices for restaurants and meat processing. See our other auctions or call us, not everything is machineseeker.

Condition: not inspected (used), Various chillers and condensers/liquefiers from bottling plant, dismantled, for sale, among others: 10 cooling plants, make Hafner + Muschler, complete on frames, each with 2 compressors, incl. electrical- and control cabinet, refrigerant R134a, power consumption: 150 kW / 198 kW / 238 kW, years of construction 2002 - 2008, dimensions each approx. 3,100mm x 1,600mm Gedpjh Nq E Sefx Ag Djca 3 condensers/liquefiers, make Thermofin, each with 4 fans, years of construction 2006/2008/2016, dimensions each: 4,200mm x 2,300mm 4 condensers/liquefiers, make Güntner, each with 8 fans with 890 rpm, 246.7 lt volume, 32 bar, year 2002/2016, dimensions: 6,150mm x 2,300mm 2 condensers/liquefiers, make Güntner, each with 6 fans, 93 lt. content, 28 bar, year 2002, dimensions: 6,050mm x 2,400mm

Condition: good (used), Refrigerant system Copeland with original condenser Type: D6DT5-320X-AWM/D (x4) Gedog N Hu Sepfx Ag Djca Volume: 126.9 m3/h (x4) Cooling capacity: 220 kW at -10°C/40°C, 56.2 kW at -35°C/40°C Refrigerant: R404A With original condenser Guntner GVH 067B/2x3N Pieces in stock: 1 Condition: Used We have many other refrigeration machines. Chillers, compressors, coolers, condensers, cold rooms, refrigeration and gastronomic furniture as well as machines and devices for restaurants and meat processing. See our other auctions or call us, not everything is available on machineseeker.

Condition: excellent (used), Year of construction: 1990, the machine in perfect condition very good machine This is a combo machine pelletizer and sandblasting machine (two in one) very low operation hours Godpfxjhmi Uco Ag Dsca