Used Tetra Pak TBA8 1000ml square V110, Helicap 27 line

Tetra Pak® TBA 8 V110

Condition: used, Year of construction: 2010, machine/vehicle number: AT91, Used CIP Tetra Pak year 2010 15T/h The Used CIP Tetra Pak year 2010 15T/h, model Tetra Alcip 1, performs Cleaning in Place (CIP) to automate the cleaning process in bottling and food processing plants. Consequently, this system ensures an effective sanitation cycle without requiring production line disassembly, optimizing downtime and reducing water and detergent consumption. Tetra Pak built the Used CIP Tetra Pak year 2010 15T/h in 2010. Specifically, its 15-ton-per-hour operational capacity makes it suitable for high-productivity plants while ensuring hygiene standards that comply with food and beverage industry regulations. Technical Features of the Used CIP Tetra Pak year 2010 15T/h The Tetra Alcip 1 applies a controlled washing cycle to remove organic and inorganic residues from production circuits. In particular, the system integrates separate tanks for water, alkaline detergent, and acid, and it automatically regulates temperature, chemical concentration, and washing time based on plant requirements. As a result, it enhances the efficiency of cleaning operations. Moreover, the Used CIP Tetra Pak year 2010 15T/h automates the cleaning process, reducing cross-contamination risks and improving production efficiency. Additionally, the system allows operators to configure different washing parameters, which enables adaptation to specific production needs and ensures thorough cleaning of filling lines, pipelines, and heat exchangers. Safety and Process Control The system includes advanced safety features, such as: Sensors that continuously monitor detergent concentration. Temperature and pressure controls throughout the cleaning cycle, ensuring optimal performance. Alarm systems that detect and manage sanitation process anomalies, thereby preventing potential failures. Lhsdpfxewga Iuj Ab Ajn As a result, these features ensure this Used CIP operates reliably, minimizing operational errors and optimizing water and chemical consumption. Furthermore, the system’s automated monitoring enhances safety while reducing maintenance requirements. Operational Advantages Using this Used CIP Tetra Pak  enhances plant productivity in multiple ways. First and foremost, it reduces downtime: the continuous washing system completes fast cleaning cycles without requiring component disassembly. Moreover, it optimizes resource usage: the automatic detergent dosing system prevents chemical waste. Additionally, it ensures regulatory compliance: the system meets high hygiene standards and complies with industry regulations. At the same time, the automated nature of this system helps manufacturers streamline their cleaning procedures. Consequently, businesses benefit from both improved production continuity and reduced operational costs. Likewise, the ability to customize cleaning parameters provides greater control over sanitization processes. Conclusion In summary, this Used CIP Tetra Pak provides an efficient and reliable solution for sanitizing bottling and food production plants. Since its design prioritizes automation, this system minimizes manual intervention while maximizing operational efficiency. Furthermore, its advanced safety features ensure maximum hygiene and productivity in the beverage and liquid food industry. Ultimately, adopting this system allows companies to maintain high sanit...

Condition: used, Year of construction: 2008, The BERTOLI H3075 dairy homogeniser is a piece of equipment used in the dairy industry primarily for homogenizing milk and cream. Here are some key points about it: - Functionality: The homogeniser works by breaking down fat molecules in the milk, ensuring a smooth and uniform mixture. This process helps to prevent cream from separating and enhances the shelf life and quality of dairy products. - Applications: It's typically used in the production of a variety of dairy products such as milk, yogurt, ice cream, and cheese. - Specifications: Although specific technical specifications can vary, common features might include: - Capacity: Often measured in liters per hour, indicating the amount of milk it can process. - Pressure Ratings: The operating pressure used during the homogenization process. - Material: Typically made from stainless steel for hygiene and durability. - Efficiency: The H3075 model is known for its efficiency in energy consumption relative to its output and performance. - Maintenance: Regular maintenance is required to ensure optimal performance, including cleaning the unit and checking parts for wear. Capacity: 10,000 Litres per hour Pressure: 200 Bar Stages: 2 Electrical Requirements: 380/50 Hz Max KW : 75 Amps Requirements: 137 A Condition: Very Well Maintained Full Service in 2025 Lsdpfjx Aa Spjx Ab Aohn

Condition: good (used), Year of construction: 2000, functionality: fully functional, pressure: 250 bar, Equipment: documentation/manual, APV Gaulin G132T-3.6P High-Pressure Homogenizer – 15,000 l/h – 250 bar – Very Good Condition For sale is a high-performance high-pressure homogenizer from APV Gaulin, model G132T-3.6P, designed for industrial use in dairy and beverage processing. This machine has been regularly maintained and is in good, fully operational condition. Ideal for applications such as milk, yogurt drinks, and similar products. Technical specifications: * Manufacturer: APV Gaulin * Model: G132T-3.6P * Year of manufacture: 2000 * Capacity: approx. 15,000 l/h * Operating pressure: up to 250 bar * Configuration: 2-stage * Pistons: 3 * Motor power: 132 kW * Application area: Milk / Yogurt drinks / Liquid products Ljdsytv Iijpfx Ab Aehn * Electrical control cabinet: included Condition: * Machine is fully functional * Regularly serviced during operation * No known defects * Ready for immediate use after installation

Condition: excellent (used), Year of construction: 2018, ENGEL DUO 5160/700 injection molding machine Year of manufacture: 2018 Operating hours: 54,823 h Lhjdpfx Aozqdageb Asn Technical condition: Very good, the machine has undergone a major overhaul of its components and is ready for further operation. Clamping unit Clamping force: 7,000 kN (700 tons) Dimensions of mounting plates: 1510 × 1440 mm Distance between columns: 1100 × 960 mm Minimum mold height: 450 mm Maximum mold height: 950 mm Maximum opening: 1850 mm Ejector stroke: 250 mm Injection unit Screw diameter: 80 mm Injection volume: 2061 cm³ Injection weight (PS): 1916 g Maximum injection pressure: 2300 bar Electro-hydraulic equipment Pump motor power: 109 kW Heater power: 40.7 kW Dimensions and weight Dimensions (L × W × H): 8.20 × 2.78 × 2.32 m Machine weight: approximately 20 tons Additional service work performed The machine has undergone extensive and costly service work, which significantly increases its value and reduces the operational risk for the future user. Recently performed: ✅ New P1 hydraulic pump – still under warranty. ✅ New ENGEL control panel – still under warranty. ✅ Replacement of 4 linear bearings in the clamping system.

Condition: excellent (used), Year of construction: 2016, clamping force: 6,500 kN, Krauss Maffei 650 GX SP 3000 Clamping force: 650 t Screw diameter: 80 mm Shot weight: 1170 g Distance between tie bars V: 960 mm Distance between tie bars H: 1110 mm Shot volume: 1284 cm3 Type: Horizontal Lhodpfx Aoy Eyxdeb Aen Drive: Hydraulic Clamping force: 650 t Screw diameter: 80 mm Shot weight: 1170 g Distance between tie bars V: 960 mm Distance between tie bars H: 1110 mm Shot volume: 1284 cm3 Type: Horizontal Drive: Hydraulic Injection Moulding Machine – KM 650 GX Injection Unit: SP 3000 Screw Diameter: 80 mm Clamping Unit Clamping Force: 6500 kN Tool Holding Force: 455 kN Platen Dimensions (H × V): 1540 × 1440 mm Space Between Tie Bars (H × V): 1110 × 960 mm Max. Mold Height: 1450 mm Mold Installation Height (Min./Max.): 450 / 1000 mm Opening Stroke: 1000 mm Ejector Stroke: 250 mm Ejector Force (Forward/Return): 95 / 49 kN Injection Unit Screw Diameter: 80 mm L/D Ratio: 21.3 Injection Pressure: 1538 bar Shot Volume: 1284 cm³ Shot Weight (PS): 1170 g Injection Rate: 141 cm³/s Injection Speed: 133 mm/s Injection Power: 60 kW Plasticizing Rate (PS): 139 g/s Heating Power Installed: 36 kW Nozzle Retraction Force: 7 kN Drive and Energy Installed Pump Power: 90 kW Dry Cycle Time (EUROMAP 6): 3.0777 s Dry Cycle Time (KM Norm): 2.5555 s Machine Dimensions and Weight Dimensions (L × W × H): 8.03 × 2.88 × 2.45 m Net Weight: 12000 kg Max. Tool Weight: 11000 kg Oil Tank Capacity: 1180 l

Condition: good (used), Year of construction: 1983, Continuous Butter Making Machine (CBM). Brand : Simon Freres Type : MD1119 C Year : 1983 Capacity : 2.000 kg per hour butter output Input : ± 4,000 liters of cream 38-42% fat With accessories: - Water and culture dosing system - Vacuum pump - Controls - Piping 1 x Butter Silo Ledpfx Ajydnzpjb Ajhn Butter capacity: 2.000 kg With 2x Butter Pumps: Waukesha type: 130U1 Motor: 5.5 kW CIP return pump Description: Butter production line. Still located at the factory in Belgium. Operating principle of the production line: Continuous butter making machine. A cream pump transports the cream from the buffer tanks to the CBM. The CBM is capable of converting 4.000 liters of cream into 2.000 kg of butter. It also features a recirculation system for cooling and injecting buttermilk, a vacuum section, and injection pumps for culture and brine. Furthermore, it includes a buttermilk cooler, buttermilk and CIP pumps, a collection tank, valves, piping, and all the necessary controls. After the butter is made in the CBM, it is pumped into the Egli butter silo, which includes two Waukesha outlet pumps to transport the butter to the filling machines.

Condition: excellent (used), Year of construction: 2001, Injection moulding machine: Krauss Maffei KM 800-5000 MC Year of manufacture: 2001 Operating hours: 70,000 h Configuration: Machine with robot, safety cage and conveyor belt Availability: Two identical machines available Clamping unit: Clamping force: 8,000 kN Maximum mould opening force: 356 kN Moving platen opening force: 98 kN Moving platen closing force: 92 kN Lodpexqh I Iefx Ab Aehn Mould platen dimensions (H x W): 1,610 mm x 1,530 mm Distance between tie bars (H x W): 1,120 mm x 1,000 mm Mould opening stroke: 1,400 mm Minimum mould height: 600 mm Maximum mould opening: 2,000 mm Hydraulic ejector stroke: 250 mm Injection unit: Screw diameter: 90 mm L/D ratio: 23 Injection pressure: 1,742 bar Injection volume: 2,863 cm³ Shot weight (PS): 2,605 g Dimensions and weight: Machine dimensions (LxWxH): 10.5 x 2.86 x 2.89 m Weight: 43 tonnes

Condition: used, 50 m³ stainless steel tank With a flat bottom 7 units available: 5 units with a diameter of 3.55 m and a height of 5.50 m or 5.40 m (quantities for each variant to be confirmed upon delivery). 1 unit with a diameter of 3.00 m and a height of 8.40 m. Lhedpfx Abez Hv Ifo Aen 1 unit with a diameter of 3.00 m and a height of 7.10 m. NOTE! The tanks require a concrete pad or foundation (available from us at additional cost).

Year of construction: 2007, condition: used, Cylindro-conical fermentation tank made of austenitic steel. Additional title: vertical, coolable stainless steel tank Capacity: 6300 l Max. overpressure: 1 bar Temperature range: 50 °C Length: 1700 mm Height: 4359 mm Material: stainless steel 1.4571, 1.4404, 1.4301 Lodpfsxwy Imsx Ab Aohn Position: standing, vertical Base construction: feet Features: 2 x jacket cooling, 1 x cone cooling

Condition: used, Automatic wooden chair painting system, already disassembled and sold in separate pieces: Lhodpfx Ajxlb E Aob Asn - 3 roller shutter belts, 2.5 metres wide - 3 roller shutter belts, 4 meters wide - 2 painting chains consisting of tracks, chain, towing motor and hangers - spray booths - correspondence desks - various