Digital Print Laminating machine

Tauler Laminator B2 Digital deep pile fully automatic

Condition: used, Machine number 7761608 Built in 2007 Max. paper length 12 cm Max. paper width 78 cm Air table Yes Side table left Yes Side table right Yes Photo cells Yes Kjdpfx Agjwkh E Norsnd Length x width x height 2000.0 × 2280.0 × 1700.0 Weight 1300 kg

Condition: excellent (used), Year of construction: 2008, machine/vehicle number: 0808339, Size 52 x 74 cm, Automatic feeding, Adjustable side bracket, Temperature control by sensor, Pneumatic pressure roller. Knjdpsrmkm Iofx Agrjd

Condition: ready for operation (used), Consisting of: Knodpfx Aoq Aufqsgred full tools, books and accessories available Technical Data Working range -base machine with electric equipment -in feed unit, MR -book bloc in feed with splitter -gluing unit -pre-heater and heated rounding unit -paternoster with press on unit -belt delivery 370mm x 270mm x 80mm max 125mm x 100mm x 6mm min 14 – 36 cycles per minute

Year of construction: 2006, condition: used, Gaemmeler KL 540 Compensating Stacker with attached blocking device VM 500 The compensating stacker KL 540 is equipped with the proven Gaemmerler LiftPack technology. The KL 540 is suitable for bundle heights up to 300 mm. Nummerous options allow to meet the individual customer requirements. Condition: cleaned and ready for production Technical Data: Ksdpfeh Nrh Uex Agrsnd Cycle time ≥ 1,5 sec. (depending on the copy) ≥ 1,2 sec. with Servo pusher (depending on the copy ) Pagination 4 – 96 Heatset / Gravure Formats A 105 – 330 mm (with rear-eject 105 – 310 mm) B 140 – 500 mm D max. 560 mm Layer height max. 200 mm Bundle height max. 300 mm Weight: 1.500 kg approx. Gaemmerler VM500 blocking unit Cycle time: (approx. 6.7 sec) per pack with a pack height of 300 mm and a blocking time of 2 sec. The cycle time per pack increases when the blocking time is increased and the pack height is reduced. The cycle time is also strongly influenced by the output speed of the compensating stacker and thus by the product (surface, format). Sizes: Width: 140 to 500 mm - 5.5" to 19.7" Length: 105 to 330 mm - 4.13" to 13" Pile height: 55 to 400mm - 2.16 to 15.7" Inlet height: 890 mm - 35" Outlet height: 890 mm - 35" Connected load: 16A (2KW, 380/480 Volt, 3 phases, neutral) Air requirement: 1000 standard l/min, 6 bar; unoiled, dry air Weight: approx. 500 kg

Condition: used, Year of construction: 1995, machine/vehicle number: 1031295, Heißleim Klebstoffsystem - Hot Melt Glue Machine Nordson Meltex MX 4012-1X2Year 1995 - Serial-No. 01031295 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Kedpjh Axhlofx Agrjnd On Stock Emskirchen / Nürnberg - Can be test

Condition: new, Year of construction: 2025, functionality: fully functional, This UV printer replaces the common laser printers - also colour prints on glass, wood, textiles, plastic, metal and many other materials New model: PS-UV4060 Max Volume Knodpfjfvx U Hsx Agred For large objects with high passage height Print head: Epson TX800 (CMYK + WW / 6 channels) 720x1080 / 720x1440 / 720x2160 dpi Including software for printer and image processing weight: 90kg Operating display Table movement through screw technology 360 degree use possible on request: for large round bottles Objects A2 size 45x65cm and 40cm print height printer dimensions: 107x106x102cm Water Circulation Cooling System Software setting and printer explanation gladly if required. Germany/Europe-wide.

Condition: excellent (used), functionality: fully functional, turning length: 530 mm, turning diameter over cross slide: 620 mm, turning diameter: 260 mm, spindle motor power: 15,000 W, spindle speed (min.): 35 rpm, spindle speed (max.): 3,500 rpm, spindle bore: 80 mm, travel distance X-axis: 195 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 590 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 15 m/min, Mori Seiki SL-25Y/500 CNC LATHE With 1.5m LNS bar feeder Control: Mori Seiki MF-T6 Tool holders: (2) Radial live tolls (2) Axial live tools (4) inside tool holders (4) outside tool holders Swing over bed: 815 mm (32.1″) Swing over cross slide: 620 mm (24.4″) Distance between centers: 620 mm (24.4″) Max. turning diameter: 260 mm (10.2″) Max. turning length: 530 mm (20.9″) X-axis travel: 195 mm +130 +65 (7.7″ + 5.1″ + 2.6″) Z-axis travel: 590 mm (23.2″) Y-axis travel: 100 mm ±50 (3.9″ ± 2.0″) Spindle speed range: 35 – 3,500 RPM Spindle nose: JIS A-8 Through spindle hole diameter: 80 mm (3.1″) Spindle bearing inner diameter: 130 mm (5.1″) Number of tool stations: 12 Shank height for square tool: 25 mm (1.0″) Shank diameter for boring bar: 50 mm (2.0″) Turret indexing time: 0.25 sec Rotary tool spindle speed: 100 – 2,000 RPM Rotary tool cutting capability: End mill max Ø20 mm, Face mill max Ø50 mm, Tap max M12 Rapid traverse rate:   X-axis: 12,000 mm/min (472.4 IPM)   Z-axis: 15,000 mm/min (590.6 IPM)   Y-axis: 10,000 mm/min (393.7 IPM) Feed per revolution:   X-axis: 0.001 – 342 mm/rev   Z-axis: 0.001 – 342 mm/rev   Y-axis: 0.001 – 500 mm/rev Jog feedrate: 6,000 mm/min (236.2 IPM) Tailstock travel: 403 mm (15.9″) Tailstock spindle diameter: 110 mm (4.3″) Tailstock spindle travel: 100 mm (3.9″) Tailstock taper: MT-5 (Live center) Spindle motor power (30 min/cont): 15/11 kW (20/15 HP) Rotary tool spindle motor: 3.7/2.2 kW (5/3 HP) Electrical power supply: 44 kVA Knodpfsw Ett Iox Agrsd Coolant tank capacity: 100 liters (26.4 gal) Machine height: 2,060 mm (81.1″) Floor space: 3,183 × 1,799 mm (125.3″ × 70.8″) Machine weight: 5,400 kg (11,900 lbs)

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, number of ink cartridges: 7, year of last overhaul: 2018, type of input current: three-phase, overall weight: 4,600 kg, Equipment: cooling unit, documentation/manual, HP Indigo ws4500 | 7 Color | WhiteInk Web-fed Digital Press for Label and Packaging • Only 44.9 Million Impression (ca. 7,9 Mio A3 Prints) • 7 Colors authorized (C,M,Y,K,Violet,Orange,White) • WhiteInk enabled • Resolution 812 x 1624 dpi (High Resolution Mode) • Linearity 150-230 lpi • Web Width from 200 to 330 mm • Max. Image Size 308 x 450 mm • Substrate Thickness 12-350 Microns • Maximum roll diameter 700 mm • Maximum roll weight 75 kg • Printing Speed: 16m/min 4 colours; 2m/min 7 colours ; 32m/min 2 colours • Substrates: SA labels and films | PET | PP | OPP | PE | PVC | PAP • HP IndiChrome On-Press Simulation • Supported file formats PostScript, PDF, EPS, TIFF, JPG • Unwinder • Rewiner • Control PC with HP PrePress Software • PC-RIP Server • HP Software-RIP • Internal Denistometer • External Donaldson Chiller • Still under HP Service until January 2018 • First Installation May 2008 • Can be tested on site Other Details: Guarantee: Without guarantee Current condition: In Production Ksdpet N Rv Esfx Agrond Availability: Immediate

Condition: used, Year of construction: 1980, Falzmaschine - Folding Machine Stahl K56/4-KTLBaujahr / Year approx 1980 - Serial-No. 16760 Flachstapelanleger / Flat Pile Feeder Falztyp: 4 Taschen - Schwert - Seitentasche - Schwert Folding Type: 4 buckles - 1 knife - 1 side buckle - 1 knife Format / Size: min. 140 x 180mm - max. 560 x 9000mm Kjdpfxolcfk De Agrsnd Papiergrammatur / Paper weight: 40 – 250(g/m²) Stapelhöhe Anleger / Pile height: max. 80cm Auslage Schuppenauslage / Delivery Stream Delivery Kompressor / Compressor include - Manuals Included Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: good (used), Size max 510 x 305 x 60 mm Size min 140 x 100 x 3 mm Cover size max 642 mm Cover size min 203 mm Speed max 12.000 c/h Equipment gathering machine • 18 stations • 18 feeders 3661-210 SF intermediate elements • spiral race away • jogging element perfect binder • 25 clamps • clamp pitch 24" • milling and roughening station • hot melt spine gluing unit • hot melt side gluing unit • premelter • SF stream cover feeder • SF cover nipping and pressing station Ksdpjd R Ecpsfx Agrond • lay down device