Bunker Bag Ripper DSD ESB

stutco Sacköffner LM30 Bunker

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Codjfi Tg Hspfx Albshb Vacuum system (with its pump) No. 2 Vertical supporting columns of the top supporting beam No. 1 Horizontal top supporting beam (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms No. 2 Out-side rollers way (on gound) to in-feed pile of panels to the Loader Out-side motorized rollers table (which receives panels from the Loader) Separate electric and command panel Perimetral safety metal grids Working capacity (cycles/min) 16 (ca.) Min/Max panels thickness mm 10 / 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1300 x 3000 (ca.) Total installed motor power Kw 30

Condition: ready for operation (used), Effective width: 1500mm, screw diameter: 2x 500mm, motor power: 2x 3.5kW, outlet: 2x 800x800mm, length: 7000mm, conveying speed: 50m/min, with steel construction underframe, closed constructional design with bunker walking elevation, an inspection is possible, year of construction unknown, was overhauled in 2022. Cjdpfx Aen Tpm Aolbshb

Condition: used, Year of construction: 2009, Numerical control POWER CONTROL PC 22 Machine suitable for 1st + 2nd passage of the panel Mobile shoulder opening motorized by N.C. mm 3000 Maximum panel height mm 60 Cjdpfx Alspp Tkfsbehb PVC-ABS edge thickness mm 3 Feed speed mt/min 40 Feed speed with rounders mt/min 20 Motorized pressure rubber belt Bearing track with retractable pin (distance between pins mm 500) Squaring part composed of: Anti-adhesive group Timed automatic anti-splinter group Double shredder group Free space for any group addition Gluing unit with pre-melter and glue pot Automatic adjustment of the edge pressure rollers Edge holder magazine with 2 positions Trimming unit with two motors Overlapped trimming unit FK rounding unit Edge scraper unit Glue scraper group Brush group Anti-adhesive group

Condition: excellent (used), Year of construction: 2000, An inclined conveyor with steel hinge plates. Last loaded with a wheel loader and a dump truck. Overall length: 9.6 m Size of the feed hopper: 8.0 x 3.6 m Chedpfsiwxmbox Albsb Width of the conveyor at the bottom: 1.85 m Maximum width with drive: 3.2 m Width of the conveyor belt: 1.3 m Overall height: 5.3 m Belt speed: 0.05 - 0.29 m/min Conveyor chain: FV 315 with bushing and idler roller Throughput: 3 to 14 m³/hour Gear motor, belt, SEW: 0.75 kW Speed: 0.2 rpm Torque: 18000 Nm Speed of the winding shaft: 64 rpm Gear motor, winding drum, Flender: 7.5 kW Total weight: approx. 20 tons A cover belt conveyor / steep conveyor is also available.

Condition: new, Year of construction: 2024, functionality: fully functional, nominal power: 90 kW (122.37 HP), rotational speed (max.): 5,760 rpm, rotational speed (min.): 1,592 rpm, total height: 3,437 mm, total length: 3,275 mm, total width: 2,500 mm, type of cooling: air, compressed air connection: 6 bar, Equipment: rotational speed infinitely variable, The impact mills of the REKORD 212-630 series in the welded housing design are robust universal mills for demanding industrial applications in continuous operation. Cedpfx Aex Ac Rbjlbehb ● Size: 630 mm (nominal rotor diameter) ● Mill housing: Heavy-duty welded stainless steel housing, pressure surge resistant up to 10 bar (AISI316L), with product-contacting surface finish Ra ≤ 1.6 μm for easy cleaning, equipped with a pivoting door and safety interlock type HAAKE (key transfer system); monitoring of housing and bearing temperature, vibration monitoring ● Mill inlet: JACOB pipe; DN 150 mm ● Mill outlet: Ground material and air discharge downward into a suction hopper, optimized for connection to the conveying line to the total separator ● Mill drive: Belt drive, three-phase motor, energy efficiency class IE3 (manufacturer SIEMENS), 90 kW, 3~ 400 V, IP55; suitable for operation with frequency inverter ● Sealing materials: Silicone; PTFE, sealing material conforms to EU and FDA food hygiene standards ● Grinding elements: Pin rotor: 4 pin rows, pin Ø 7 mm (wear-reduced); Pin stator: 3 pin rows without external pin circle, pin Ø 7 mm ● Bearings: Designed for toughest operational demands in continuous industrial service, heavy-duty bearing housings with temperature and vibration monitoring (early detection of potential bearing failure and avoidance of hot surfaces) ● Inert gas supply/monitoring for shaft seal on product chamber side ● Run monitoring to detect operating faults ● Machine frame: The complete unit – mill, drive with motor, tensioning rails, belt drive, and belt guard – is installed ready for use on a sturdy machine frame with height-adjustable machine feet Main components of the offered system include: ● Product feed/transfer from customer’s upstream process and transfer to a rotary valve (certified ATEX protection system); ● Industrial pin mill type REKORD 630-SSt with welded housing and ground surfaces; ● Product separator with discharge rotary valve (certified ATEX protection system); ● Pneumatic conveying line with air inlet/outlet, including suction blower; ● WITHOUT control system, without frequency inverter

Year of construction: 2002, condition: used, functionality: fully functional, Electric overbelt magnet with a 1400 mm wide band, the main dimensions are approximately 3500x2000x900 mm (lxwxh) Chedpsiyx Eyofx Albob

Condition: used, functionality: fully functional, power: 22 kW (29.91 HP), Year of construction: 1997, Circular vibrating screen Screen area: 6,000 x 2,000 mm Motor stand with drive components Cjdpfx Aleulu Rfebehb Lower deck with piping and spray system incl. plastic screen linings for both screen decks

Year of construction: 2006, condition: ready for operation (used), An inspection is possible. Cedpoqvnmbofx Albehb

Year of construction: 2025, condition: new, machine/vehicle number: 100119-4, Description:  Screen deck system consisting of 1 deck for separating old wood or wood chips  Input material 0-200 mm  Capacity approx. 80 m³/h (material-dependent)  Material separation into 2 fractions: 0-25 mm and oversize  To be mounted on customer-supplied impact plates or a base frame Technical data:  Screen deck 1: Length = 5,200 mm; Width = 1,215 mm o External dimensions: Length = 5,500 mm; Width = 1,850 mm o Screen area 6.3 m², number of shafts 40 o Drive: 2 x 9.2 kW geared motors o Screen body: Polyurethane (star screen) D 166 / 12 fingers o Screen shafts as a plug-in system (easy and cost-effective adaptation to other grain sizes possible) o Bearing lubrication located externally, optional central lubrication system available at an extra cost Chjdpog I Uqisfx Albjb Delivery time approx. 16 to 18 weeks.

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (tape) thickness in rolls (min/max) mm 0,6 - 3 Panels thickness (min/max) mm 8 - 60 / Working width (min/max) mm 225 - 3000 Numerical Control Power Control PC 22 /Software: Wood Commander Adjustable feeding speed (m/min ) 15 - 32 Distance (center-axes) of the Disappearing Dogs (mm) 400 SIZING PART (for each side): Anti-chipping Milling Unit 1 x Kw 4,5 / Hogging Units KD 11 (2 x Kw 6,6) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) A3 + SERVO Band Pressure zone "A" Edge coils supporting unit (No. 2 reels) Snipping (end-cutting) unit HL 84 (2 x Kw 0,22) Rough Trimming unit (2 x Kw 0,55) Fine Trimming unit 2 x Kw 0,4 Corner Rounding unit (Contour Trimming) FF 12 (4 x Kw 0,4) LEFT SIDE: 2 x Jumping Milling Unit (for grooving) UF11 (Kw 4 x 2) 0°-90° RIGHT SIDE: 1 x Jumping Milling Unit (for grooving) UF11 (Kw 4 x 1) 0°-90° Profile edge scraping unit PN10 (PNEU) Chjdpop N D Ngefx Albob Finish processing unit (Glue scraper + Buffing unit) FA 11