Hammer Mill

Strojirna Vodnany Pds2 75kW

Year of construction: 2002, condition: reconditioned (used), Fully automatic finger jointing line: Type Doppel-Pack with automatic feeding Dodeg D Ugkjpfx Ab Tswf With multiple crosscut saw With automatic stacking machine Specification: Wood input length: min. 150 mm max. 1000 mm average 400 mm wood cross-section: min. 20 x 40 mm max. 80 x 180 Wood exit length: 6030 mm max. Wood cross section with 10 mm tine size: Hardwood 120 cm² softwood 150 cm² Tine design vertical and horizontal Glue type. PVAC white glue, 2-sided glue application Electric power: Supply voltage: 400 V Control voltage: 24 V 50 Hz System completely wired up to the control cabinet. Tine length / possibly wood cross-section and glue type can still be adapted. Capacity: 6 milling tables/ min working height: 960mm table width: 600 mm glue application: double-sided application Technical parameters: Input material: Input length of parts (min. - max.): 150-1000mm Part width (min. - max.): 40-155 Part thickness (min. - max.): 20-80mm Working height : 960mm Bundle width: 600mm Glue application: double-sided application (on both sides of the

Condition: used, machine/vehicle number: IDC000031, Chip drying barrel Length - 14 m Width - 3.6 m Drying capacity - 10t/h Dsdpsrl Ra Hsfx Ab Tewf

Condition: refurbished (used), Wood waste and bark shredder ERJO. Completely renovated. Yan knives and counter knives installed. Dwodpfx Abjl Sli Dj Tsf

Condition: good (used), Year of construction: 2008, La Meccanica CLM 800 POR Granulator The machine has no door Djdpfx Aswdawqjb Tewf It worked on a cake

Condition: refurbished (used), SINGLE-SIDE SIZING & EDGE BANDING MACHINE (Left side machine) Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Edges thickness in stips / lippings (min/max) mm 1 ALU Dwedpfx Abjcr T N Ds Tef Panels thickness (min/max) mm 6 - 55 Numerical Control /Software IMATRONIC 121 /01 Adjustable feeding speed (m/min ) 6 - 30 SIZING PART : Pre-milling Unit (vertical joint trimmers) adjustable by N.C. (2 x Kw 4,5) 08.376 Spraying unit (Anti-sticking liquid) EDGE-BANDING PART : Lamps to heat the workpieces side + Glueing Unit (P.U.R. Glue + Quick Melt unit) 04.1569 Band Pressure zone mm 1000 + Edge coils supporting unit (N. 6 reels) Snipping (end-cutting) unit 08.42 (2 x Kw 0,66) working speed 25 m/min (swivelling 0-25°) Rough Trimming unit 08.0555 (2 x Kw 1) Fine Trimming unit 08.055 (2 x Kw 1) 30° + Spraying Unit (for sliding liquid) Multi-Profile Copying unit 08.348 (fine and contour trimming) adjustment by N.C (2 x Kw 0,66) Profile edge scraping unit (Multi-profile, adjustable by N.C.) 08.516 Glue scraping unit 08.517 (Pneumatic) Spraying Unit (for polishing liquid) Buffing unit 08.614 (2 x Kw 0,25) Milling grooving unit 08.183 (1 x Kw 3) Smoothing unit with spheres 08.53 Chamfer Sanding Unit for straight edges WI (4 x Kw 0,75)

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, FX bend 1023 Machine in perfect condition Dsdpfxeq Ttqmj Ab Tjwf Max. bending force (kN) 230 Bending length (mm) 1020 Y axis stroke (mm) 200 Y axis speed (mm/sec) 200 Inclination (mm) (Y1-Y2) - Opening (mm) (table to ram) 395 X axes stroke (mm) (4 axes X-R-Z1-Z2) 375 + 400 R axes stroke (mm) (4 axes X-R-Z1-Z2) 180 Z axes stroke (mm) (4 axes X-R-Z1-Z2) 850 - 85x2 X axes speed (mm/sec) (4 axes X-R-Z1-Z2) 250 R axes speed (mm/sec) (4 axes X-R-Z1-Z2) 600 Z axes speed (mm/sec) (4 axes X-R-Z1-Z2) 1100 X axes stroke (mm) (6 axes X1-X2-R1-R2-Z1-Z2) 375 + 230 R axis stroke (mm) (6 axes X1-X2-R1-R2-Z1-Z2) 180 Z axis stroke (mm) (6 axes X1-X2-R1-R2-Z1-Z2) 744 X axis speed (mm/sec) (6 axes X1-X2-R1-R2-Z1-Z2) 1000 R axis speed (mm/sec) (6 axes X1-X2-R1-R2-Z1-Z2) 650 Z axis speed (mm/sec) (6 axes X1-X2-R1-R2-Z1-Z2) 800 Connections wireless/USB port YES/2 Motor power (kW) 1x5,2 Connected load (kWa) 5 Approx. weight (kg) 2700

Year of construction: 2006, condition: excellent (used), saw Miter with drilling BALESTRIERI TECHNA PLUS 3001 Dodod Ifgvopfx Ab Towf Manufacturer BALESTRIERI Model / machine type TECHNA PLUS 3001 Year of production 2006 Machine category Saw Plow Mobile cutting head with positioning drive through motion units and electronic digital display. Slides consist of tempered guides and recirculating ball racks. • 2 units with an O 400 blade - each unit is driven by a Kw. 3 • The capacity (radial system) of the rolling slide unit • 2 support tables of components supplied with vertical pneumatic clamps • 1 indirect table support • For reading through the electronic digital display • 2 boring units delivered from the head in 5 spindles 32 mm - Kw motors. 1.5 (rpm 5500) - slides for rolling the slide unit • Mechanical reader for vertical and horizontal corrections - boring heads are horizontally or vertically orientated • Cycle start by buttons for two hands (in accordance with safety regulations) and pneumatic pedal controls. • Automatic waste of evacuation • Max cutting height: 145mm • Maximum cutting width: 300mm • Min cutting length: 170mm (with automatic loading / unloading fitted 355mm) • Maximum cutting length: 3100mm Cutting width 300.0 mm Cutting height 145.0 mm Engine power 1.5 kW ----- Length x width x height - × - × - Weight 2300.0 kg Running hours Hours of connecting to electricity Good technical condition Compliance with CE standards ----- • Weight: 2300kg

Condition: used, Technical details: Dsdpfxeu Nwl Uj Ab Towf lifting capacity in kg: 6600 kg fork length: 1.500 mm Lifting height: max. 3.700 mm track width: vorn: 1.800 mm track width: hinten: 1.400 mm axle distance: 2.200 mm voltage: 15 V / Hz Number of working hours: 416,0 (Stand: 28.07.2025) noch in Betrieb h weight approx.: 9.500 kg dimensions L x W x H: 5,2 x 2,0 x 2,8 m - Mast = Duplex design - Fork carriage width max. 1800mm - Load center of gravity: at 600mm = 6,600kg; at 700mm = 6,105kg and at 800mm = 5,685kg - with coupling (pin Ø 40mm) *

Condition: ready for operation (used), Year of construction: 2010, Technical Specifications Specification Detail Motor Power 2 × 15 kW (Total 30 kW) Cutting Chamber (L × W) 1,074 mm × 524 mm Distance Between Shafts 192 mm Rotor / Shaft Type Twin-shaft, hexagonal (85 mm A/F), counter-rotating Knife Diameter 260 mm Knife Thickness 15.5 mm Overall Dimensions (L × W × H) 2,770 mm × 1,460 mm × 2,700 mm Approx. Weight 2,100 kg Drive Type Electric, geared reducers Construction Heavy-duty steel frame, self-cleaning shafts Throughput (typical) 0.5–3 t/h depending on material type and knife configuration ♻️ Suitable For Dsdpfsxlcvcsx Ab Tjwf Plastic lumps, profiles, film, and containers Wood waste, pallets, and offcuts Electrical and electronic scrap (WEEE) Light metals, cans, general waste Paper, cardboard, and confidential document shredding

Condition: good (used), Year of construction: 2008, functionality: fully functional, Production line manufactured by a Canadian company Brunette, which can be described as very powerful and durable. The offer includes a log debarker with feeding tables, bark collection conveyors, as well as a chipper with 630kW installed capacity and a double screw unloading conveyor. Dwsdpfxsvu D Dwj Ab Tsf