Clamping plate 3000 x 2000 (3 pcs)

Stolle

Condition: excellent (used), Year of construction: 2017, operating hours: 6,050 h, functionality: fully functional, travel distance X-axis: 213 mm, travel distance Y-axis: 572 mm, Haas turning center Type: ST 25 Year 2017 Fgedordg H Hspfx Ab Tjk Hours of operation 6047h Maximum power rating, drive system 22.4 kW, belt drive Bar capacity, maximum speed 76.0 mm, 3400 r p m Axis movement range (X, Z) 213 mm, 572 mm Chip extraction Spindle clearance 75mm

Condition: used, Year of construction: 1987, Technical details: Fsdpfxeu Ixzne Ab Tegk turning diameter over bed: 500 mm turning diameter over support: 280 mm turning length: 1500 mm centre distance: 1500 mm turning dia. in gap: 730 mm spindle bore of work spindle: 65 mm range of revolution per miute: 25-1250 / 32-1600 / 36-1800 - 18 step U/min feed:: 0,05 - 8,5 mm rapid motion - x-axis: 4 m/min rapid motion - y-axis: 1,26 m/min tailstock quill taper MT: 5 tailstock quill adjustment:: 200 mm total power requirement: ca. 8,2 kW weight of the machine ca.: 2,5 t dimension machine xH: 3,2 x 1,3 x 1,5 m Thread cutting possible Cross slide travel 300 mm, feed 0.015 - 2.8 mm (clutch end position switching not functional, manual switch-off necessary) Top slide with 4-fold tool holder Steel plate Ø 705mm with offset threaded holes *

Condition: excellent (used), CTS Type: C-40/60 CTS small climate chamber air-cooled Test volume: 60 liters Temperature range: -40 °C / +180 °C Humidity range 10% to 98% relative humidity +10 °C to +90 °C in the temperature range +5 °C to +89.5 °C in the dew point range Dimensions (WxDxH): Inside: 400 mm x 345 mm x 425 mm Housing: 560 mm x 845 mm x 1575 mm Refrigerant: R-404A Nominal voltage: 230V 1/N 50 Hz Output: 3.3 kW Rated current: 13 A The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Fodpfeu Hlb Eox Ab Tegk Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), total height: 350 mm, overall weight: 5,000 kg, total width: 1,500 mm, table height: 350 mm, total length: 4,200 mm, Used clamping table 4200 x 1500 x 350 mm Fedpfx Ajuzaafsb Tegk Weight approx. 5000 kg

Condition: used, Turning tool holder, tool holder, turning tool, turning tool holder, tool holder, axial tool holder, driven tool, bar gripper, thread cutting head Fgjdegl Dutopfx Ab Tsk -Manufacturer: Sandvik, 17 pieces turning tools with tool stand -Socket: Ø 40 mm -Various types: see photos, more pictures can be sent -Sale: is only sold as a whole -Dimensions: 400/660/H500 mm -Weight: 25.6 kg

Condition: good (used), Year of construction: 2006, total length: 4,000 mm, total width: 2,500 mm, plate height: 300 mm, Manufacturer: PAMA Type: Floorplates Year of manufacture: 2006 2 units available matching cast iron floorplates/bedplates Integrated leveling chambers Fjdpowpvcyefx Ab Tjgk Can be used in combination with PAMA SPEEDRAM 1000 Machine 8643 Testing area Mounting area Measuring area Calibration area Specifications Metric US Standard Length 4000 mm Width 2500 mm Height 300 mm Number of T-slots 10 Distance between T-slots / Pitch 250 mm T-slot size 26 mm Weight per plate approx. 7800 tons Number of matching pieces 2 Dimensions (Estimate) Length 4000 mm Width 2500 mm Height 300 mm Weight 7800 kg Please note: The information on this page was obtained by us to the best of our knowledge and, as far as possible, from the manufacturer. The information is provided in good faith, but the accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual conditions. We recommend you check all important details.

Condition: good (used), Year of construction: 2000, total length: 4,000 mm, total width: 2,500 mm, plate height: 320 mm, T slotted bed plate STOLLE - SDT MACH-ID 9170 Make: STOLLE Fgedpewwr Unofx Ab Tok Type: SDT Length:4000mm Width:2500mm Height:320mm

Condition: good (used), total length: 3,500 mm, total width: 2,000 mm, plate height: 350 mm, Manufacturer: ASQUITH Type: ST-35 Specifications Metric US Standard Length 3500 mm Width 2000 mm Height 350 mm Number of T-slots 8 T-slot pitch / spacing 285 mm T-slot size 36 mm Number of matching pieces 1 Dimensions (estimated) Length 3500 mm Width 2000 mm Height 250 mm Weight 5250 kg Please note: The information on this page has been compiled by us to the best of our knowledge and, wherever possible, obtained from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. Accordingly, they do not represent any representations or contractual conditions. We recommend you verify all important details. Fjdpfxswp D S Ns Ab Tjgk

Condition: good (used), total length: 4,010 mm, total width: 2,100 mm, plate height: 200 mm, Manufacturer: STOLLE Type: RDG Year of manufacture: 1980 Specifications Metric US Standard Length 4010 mm Width 2000 mm Height 220 mm Number of T-slots 13 T-slot distance / pitch 400 mm T-slot size 35 mm Weight per plate approx. Fsdpfewp Dhdsx Ab Tsgk 5.3 tons Dimensions (estimated) Length 4010 mm Width 2100 mm Height 220 mm Weight 5300 kg Please note: The information on this page was provided to the best of our knowledge and, as far as possible, obtained from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representation or contract conditions. We recommend that you check all important details.

Condition: good (used), Manufacturer: STOLLE Year of manufacture: 1995 Specifications Metric US Standard Length 2520 mm Width 2000 mm Height 230 mm Number of T-slots 8 Distance between T-slots / pitch 252 mm T-slot size 22 mm Weight per plate approx. 2.7 tons Number of matching pieces 1 Dimensions (estimated) Length 2520 mm Width 2000 mm Height 230 mm Weight 2700 kg Please note: The information on this page has been obtained by us to the best of our knowledge and, where possible, from the manufacturer. The information is given in good faith, but the accuracy cannot be guaranteed. Accordingly, they do not represent any warranty or contractual conditions. We recommend verifying all important details. Fjdpswpuxysfx Ab Tegk