Clamping plate 5500 x 1850 x 300 mm

Stolle

Condition: excellent (used), Year of construction: 1990, overall weight: 17,500 kg, total height: 500 mm, total length: 6,000 mm, total width: 3,000 mm, plate width: 3,000 mm, Floorplate Length:6000mm Floorplate Width:3000mm Length: 6000mm Width: 3000mm Giedpfx Abeygwa Tj Det Height: 500mm Weight: 17500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: like new (used), Year of construction: 2015, functionality: fully functional, Tool Milling Machine Kunzmann WF 600M with Heidenhain TNC 128 Control System | Excellent Condition | CE-Compliant! Technical Data: - Year of manufacture: 2015 | Machine No. 610398 - Milling table clamping surface: 800 x 425 mm - Clamping slots: 6 - Slot width: 14 H7 - Slot spacing: 63 mm - Maximum load: 300 kg - Spindle speed range: 1 – 4500 rpm - Infinitely variable feed: 0–2000 mm/min - Rapid traverse (X and Y axis): 5000 mm/min - Z axis: 4000 mm/min - Travel (X/Y/Z): 600/400/400 mm - Vertical and horizontal quill: SK40 - Hydraulic clamping system - Weight: approx. 2025 kg - Dimensions (L x W x H): approx. 2 x 2 x 2 m - Main drive motor: AC three-phase motor - Power rating at 100% duty cycle Accessories and Equipment: Giedpswz Eu Nefx Ab Dot - Heidenhain TNC 128 control system - Hydraulic clamping, vertical and horizontal - Automatic central lubrication - Spindle brake - Technical documentation, spare parts diagrams, operating manual - Coolant system About the Machine: Offered here is a tool milling machine Kunzmann WF 600M equipped with a Heidenhain TNC 128 control system. The TNC 128 provides numerous dialog-guided cycles with graphical simulation for quick and easy data entry, such as various drilling cycles, tapping, bolt circles, linear hole patterns, rectangular pockets, rectangular tenons, and surface facing. This universal milling machine is in like-new condition. The control system is very easy to operate. Additionally, the machine features hydraulic clamping for both vertical and horizontal operation. Switching from vertical to horizontal is very simple by swiveling the vertical head to the side. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically tested at our facility. You are welcome to view and test the Kunzmann under power on-site.

Condition: good (used), total height: 300 mm, total length: 3,980 mm, total width: 1,500 mm, Manufacturer: STOLLE Gedpfewp Dbdex Ab Deit Type: Cast Iron Specifications Metric US Standard Length: 3980 mm Width: 1500 mm Height: 300 mm Number of T-slots: 6 Spacing between T-slots / pitch: 250 mm T-slot size: 35 mm Weight per plate approx.: 4,700 ton Number of matching pieces: 2 Dimensions (Estimated) Length: 3980 mm Width: 1500 mm Height: 300 mm Weight: 4700 kg Please note: The information on this page was provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, it does not represent a representation or contract terms. We recommend you check all important details.

Condition: excellent (used), Year of construction: 1995, Number of T slots: 9 Jump from T to T: 172mm T size: 22mm Gedpfx Abjx Ttg Ro Dsit Number of matching pieces:1 Length: 1000mm Width: 730mm Height: 1600mm Weight: 1350kg

Condition: as good as new (ex-display), Year of construction: 2026, Centre height: 181 mm Centre distance: 1000 mm Maximum grindable workpiece diameter: 360 mm Max load cantilevered: 1000 N (100 kg) Max load between centres: 3000 N (300 kg) Z-axis: Table swivel angle: 10° Table drive, hydraulic: 0–4 m/min X-axis: Cross slide travel: 80 mm Rapid traverse (hydraulic): 50 mm Coarse adjustment – air cushion: 280 mm Infeed drive by DC motor Rapid infeed speed: 48 mm/min/Ø Infeed cycle: Plunge grinding / Longitudinal grinding 4 preselectable speeds: mm/min/Ø: 0.01–48 4 preselectable infeed increments: mm: 0.001–0.1 Automatic shut-off during stop-grinding: 0–99 s or 0–99 strokes Stepwise infeed: mm/Ø: 0.001 Grinding headstock universal, swivelling: 0–180° Grinding wheel (OD): D x width x bore: 500 x 100 x 127 mm or 203.2 mm Grinding wheel (face, option) D: 250 x 32 x 76.2 mm Grinding wheel (ID, option) D: 2–250 mm Drive power, external/face: 5.5 (7.5) kW Drive power, internal: 2.2 kW Giedpfx Abstqf Rzj Det Peripheral speed, external: 35 (50) m/s Grinding wheel wear (OD): mm/Ø: 160 Guard width: 100 mm Grinding spindle diameter: 60 mm Internal spindle mounting: 80 (100) mm Workpiece headstock: Infinitely variable drive: MK 4, 1/min: 30–270 / 50–450 Workpiece spindle lockable Spindle mounting: MK 4/24 mm Spindle nose for flange attachment: MK 4, cylindrical Ø63H6 x 6 mm Headstock swivels on rotating part: 0–90° Tailstock: Quill mounting / Quill diameter: MK 4, 750 mm Quill stroke: 45 mm Quill force, N: 100–800 / 250–1400 adjustable Quill operation: manual (foot switch) Quill fine adjustment: ±40 μm Connections: Total machine connected load: 6.5–10 kW Grinding headstock: 5.5 (7.5) kW Workpiece headstock: 0.55 (1.1) kW Coolant filtration: 0.75–2.2 kW Lubrication pump – guideways: 0.1 kW Hydraulic pump: 1.5 kW Hydraulic tank: 80 l Pneumatics: 6 bar Comparable to: Weiss / EMAG / GP cylindrical grinders / Studer / Kellenberger / Schaudt / Tschudin / Tacchella / Dannobat

Condition: excellent (used), overall weight: 4,600 kg, total height: 300 mm, total length: 4,300 mm, total width: 1,500 mm, T slotted bed plate STOLLE - . MACH-ID 9173 Floorplate Length: 4300mm Floorplate Width: 1500mm Gisdpfx Abowxwm Ss Djt Height: 300mm No. Of T-slots: 4 Distance from T to T-slot / Jump:330mm T -slot size: 30mm Weight a plate approx.: 4600kg Number of matching pieces: 2 Length: 4300mm Width: 1500mm Height: 300mm Weight: 4600kg

Condition: good (used), total length: 5,000 mm, total width: 2,000 mm, plate height: 300 mm, Manufacturer: STOLLE Type: SDT Year of manufacture: 2000 Specifications Metric US Standard Length 5000 mm Width 2000 mm Height 300 mm Number of T-slots Godpfx Abjwp Emzj Deit 5 Distance between T-slots / pitch 400 mm T-slot size 36 mm Number of matching pieces 1 Dimensions (Estimated) Length 5000 mm Width 2000 mm Height 300 mm Weight 8000 kg Please note: The information on this page has been provided by us to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not represent representations or contractual terms. We recommend that you verify all important details.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 9101, travel distance Y-axis: 4,600 mm, travel distance Z-axis: 1,600 mm, rotational speed (max.): 6,000 rpm, Equipment: rotational speed infinitely variable, Machine configuration: • PowerPortal4000 • 45° diagonal milling head (C 0.01° / A 0.01°) • Camera system integrated in SHW diagonal milling head • 4-point Hirth-type milling head interface • Heidenhain TNC 7 • HR 550 FS handwheel • Heidenhain optimization for 5-axis machining • X = freely selectable, Y = 4,600 mm, Z = 1,600 mm • ToolCenter with 90 tools • Coolant system 2,500 l • Coolant pump 70 bar / 30 l/min • Coolant/air switching • Wash gun in the working area • Main drive 75 kW up to 6,000 rpm • Tool holder SK 50 BIG-PLUS Gsdpfx Abeygtnas Dsit • Panelling and grating • Double chip conveyor • SHW-UniScan • Sealing air • Operating mode 3 • Hexagon wireless probe • LED workspace lighting • Second camera in the working area

Condition: good (used), total length: 5,400 mm, total width: 1,800 mm, plate height: 350 mm, Manufacturer: STOLLE Type: DTG Year of manufacture: 1994 Gijdpswp Episfx Ab Djt Specifications Metric US Standard Length 5400 mm Width 1800 mm Height 350 mm Number of T-slots 6 Distance between T-slots / Pitch 300 mm T-slot size 36 mm Number of matching pieces 1 Dimensions (Estimated) Length 5400 mm Width 1800 mm Height 350 mm Weight 7500 kg Please note: The information on this page has been, to the best of our knowledge and belief, provided by us and, wherever possible, obtained from the manufacturer. The information is provided in good faith, but its accuracy cannot be guaranteed. Accordingly, they do not constitute a representation or contractual terms. We recommend that you verify all important details.

Condition: used, total length: 3,050 mm, total width: 1,525 mm, plate height: 305 mm, Manufacturer: STOLLE Year of manufacture: 1990 Specifications Metric US Standard Length 3050 mm Width 1525 mm Height 400 mm Number of T-slots 5 T-slot spacing / pitch 305 mm T-slot size 34 mm Weight per plate approx. 4400 kg Number of matching pieces 4 Dimensions (Estimate) Length 3050 mm Width Gsdpfx Aowp Hbysb Dsit 1525 mm Height 400 mm Weight 4400 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contract terms. We recommend that you verify all important details.

Condition: reconditioned (used), Year of construction: 1988, Graver grinding machine Gedslxpfmjpfx Ab Dsit Make: Deckel Model: S0E Year of manufacture: 1988 - overhauled, repainted RAL7035 light grey / RAL7012 basalt grey Machine no.: 88-6730 Guarantee: 12 months single shift from delivery For machines located outside of our Northern Bavarian sales area, the travel costs are to be borne by the customer. Accessories: - Machine stand - Integrated dust extraction - Grinding wheel with flange - Pulling tool - Operating instructions Incl. installation of an on/off switch with undervoltage release to implement restart protection e.g. in the event of a power failure or pulling the power plug incl. production of a mounting adapter plate Used as seen The machine is technically corresponding to the state of the year it was built.

Condition: excellent (used), plate height: 1,600 mm, plate width: 1,000 mm, 6 matching pieces identical available No scratches mint condition T size T 22 and 175 Jump from T to T  Grey casted angles plates Loading capacity 10.000 Kg Number of T slots: 9 Jump from T to T: 175mm T size: 22mm Number of matching pieces:1 Giodpfx Abex Trm Nj Det Length: 730mm Width: 1000mm Height: 1600mm Weight: 1300kg

Condition: good (used), Year of construction: 2000, total length: 4,000 mm, total width: 2,500 mm, plate height: 320 mm, T slotted bed plate STOLLE - SDT MACH-ID 9170 Make: STOLLE Type: SDT Gisdpfowwr Unox Ab Dst Length:4000mm Width:2500mm Height:320mm

Condition: as good as new (ex-display), Year of construction: 2025, Offered is a conventional universal cylindrical grinding machine EMAG Weiss Eco 200. The super compact machine is targeted to users who do not require a CNC control unit, but still set the highest requirements for machining quality. The machine is easy to operate and access, which allows for fast machine tooling. TECHNICAL DATA Workpiece diameter: max. 200 mm Workpiece lenght: max. 400 mm Center height: 100 mm Workpiece weight: 30 kg Workpiece headstock - socket: MK4 Tailstock - socket: MK3 Grinding wheel diameter: max. max. 350 mm Gisdpfstmqcwox Ab Dst Price, delivery time and equipment of the machine according to agreement.

Condition: good (used), Manufacturer: STOLLE Year of manufacture: 1995 Specifications Metric US Standard Length 2520 mm Width 2000 mm Height 230 mm Number of T-slots 8 Distance between T-slots / pitch 252 mm T-slot size 22 mm Weight per plate approx. 2.7 tons Number of matching pieces 1 Dimensions (estimated) Length Gjdpfx Ajwpuxyjb Doit 2520 mm Width 2000 mm Height 230 mm Weight 2700 kg Please note: The information on this page has been obtained by us to the best of our knowledge and, where possible, from the manufacturer. The information is given in good faith, but the accuracy cannot be guaranteed. Accordingly, they do not represent any warranty or contractual conditions. We recommend verifying all important details.