Gear motor 0.75 kW 380/40 rpm

SSB Rapid DSG-012/20-0410.208.40 - K1 - B5

Condition: excellent (used), Year of construction: 2008, overall weight: 1,195 kg, volume flow: 7.25 m³/h, operating pressure: 13 bar, input voltage: 400 V, ATLAS COPCO GA 37 VSD ff screw compressor Variable speed, (inverter) Iedpfet Hdh Nex Adnja With refrigerant dryer 37 kW motor Capacity 7.25 m3/min Pressure 13 bar Mileage 13200 hours The compressor is fully functional.

Year of construction: 2007, condition: ready for operation (used), Turning diameter: 420mm, turning length: 820mm, spindle bore: 105mm, speed: 3000rpm, spindle power: 22kW, travel X/Z: 280mm/820mm, tool positions: 10, drive tool speed: 6000rpm. Machine dimensions X/Y/Z: approx. 4400mm/2100mm/2300mm, weight: approx. 6000kg, control: Mitsubishi M-720BM (MAPPS 2), operating hours: 10000h. Including various accessories. The driven tools have never been used, only the Y-axis has run. Measuring arm and ball screw of the Y-axis are as good as new. Documentation available. On-site inspection is possible. Ijdpfxjv I U Iyo Adnja

Condition: excellent (used), Year of construction: 2013, Kaeser screw compressors - various models Iodpsqcu Rcofx Adnja

Condition: used, Year of construction: 1997, through-put width 1200 mm working heigth 1200 mm depth of chamber 1200 mm operating pressure 6,0 bar Ijdovlzzuopfx Adnsa voltage 380 V weight of the machine ca. 1,4 t dimensions of the machine ca. 1,40 x 1,70 x 2,70 m - Serial-no.: 340997-466 - Pressure blasting cabin - Retractable rotary table - Foot switch - Suction unit - Stairs

Condition: like new (used), Year of construction: 2006, Technical data Manufacturer: KENT Model: VK 1600MC Year : 2.006 Serial number: 2200139 Control unit: FANUC 18 iMD Location: Tabaza (Asturias - Spain) Table Dimensions Working Surface: 1700 x 810 mm. T-Slot ( Size x Number x Center distance): 22 x 5 x 160 mm. Max. Table Load: 2.000 kg. Travel X axis traverse: 1600 mm. Y axis traverse: 815 mm. Z axis traverse: 815 mm. Distance from Spindle nose to table: 220 ~ 1035 mm. Distance from Spindle center to Column: 865 mm. Spindle Taper: BT50 Spindle speed (Gear type): 30 – 6000 rpm. ZF GEAR BOX (2 ranges): Yes Max. Tool Weight: 15 kg. Max. Tool Size (Diameter x Length): 125 x 300 mm. ATC Max. tool Ø x L: Ø125 x L250 Max. tool weight: 15 kg. Number of tools: 32 Feedrates Cutting Feed Rate: 1 – 10.000 mm./min. Rapid Traverse: 18/18/18 mm./min. Motor Spindle Drive Motor (30 Min Rating): 15/18,5 Kw. X,Y,Z Axis Drive Motor: X: 5.5 | Y: 5.5 | Z:5.5 Coolant Pump Iedeqwyzfepfx Adnoa CTS: One air & two coolants – 4 bar. + 6 bar / 20 bar Weight and dimensions Machine weight: 16.150 kg Machine dimens: 4.488 x 3.448 x 3.250 mm. Base space: 5.000 x 3.500 mm.

Year of construction: 2014, condition: good (used), For sale is a Nilfisk compact safety industrial vacuum cleaner type CTS40 M Z22 400 C 4 kW 9 A 50 Hz 114 kg Ex-proof The vacuum cleaner is in good condition and ready for immediate use Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Do you need a high quality but inexpensive metalworking machine for your production? Or do you want to sell yours? Iodshu Sf Hspfx Adnea For more information or to contact us please visit our website

Year of construction: 1960, condition: good (used), machine/vehicle number: 970015, Load capacity with horizontal faceplate position: 10 t Load capacity with vertical faceplate position and centre of gravity distance 300 mm: 10 t Load capacity with vertical faceplate position and centre of gravity distance 830 mm: 5.5 t Face plate dimensions: 1500 x 1500 mm face plate speed hydraulically infinitely variable: 0,025 - 0,75 rpm Pivoting range: 0 - 135 Swivel time for full swivel range to: 140 s Swivel time for full swivel range down: 120 s Hydraulic drive: 380 V Height of swivel axis above floor: 1450 mm space requirement: 3800 x 1950 x 1800 mm Iodpfocblc Sox Adnja Weight approx.: 3,5 t Weight of the counterweight: 2,3 t

Condition: ready for operation (used), Year of construction: 2002, - USED - 4-AXIS HORIZONTAL MACHINING CENTRE WITH MULTI-PALLET SYSTEM X-AXIS TRAVEL: 1000 mm Y-AXIS TRAVEL: 850 mm Z-AXIS TRAVEL: 750 mm DISTANCE SPINDLE NOSE-TABLE: 50 - 900 mm RAPID FEEDS X-Y-Z: 30 m/min Iodjq Drw Ejpfx Adnea SPINDLE: 15000 rpm; 30 kW; ISO 50 - BT PALLET: INDEXING ; N.15 ; 630x630 mm HIGH PRESSURE COOLANT: 70 Bar TOOL MAGAZINE: CHAIN-TYPE ; 225 POS MAX TOOL DIAMETER: 120 mm MAX TOOL LENGHT: 500 mm MAX TOOL WEIGHT: 27 Kg CONTROL UNIT: FANUC 16i-M ACCESSORIES: SWARF CONVEYOR ; TOOL SETTER ; TOUCH PROBE

Condition: used, Year of construction: 2007, Swing over bed 923,8 mm Swing over cross slide 755 mm max. turning diameter 356 mm Max. Turning length 515 mm control MSX-850 III travel -x axis 260 mm travel -y axis -50, +50 mm travel -z axis 590 mm travel - z axis (spindle 2) 624 mm driven tools turning speeds 6.000 U/min CNC Turning- and Milling Center | MORI SEIKI - NL1500SY / 500 equipped with main/counter spindle, b- + y- axis, a turret for driven tools and chip conveyor and loading and unloading system (alphaMAX). The machine has only 3.400h processing time hours. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Iodsvwgkrepfx Adnea #Tags: NL1500SY500 | NL 1500 SY / 500 | NL-1500SY / 500 | NL-1500 SY / 500

Year of construction: 2000, operating hours: 50 h, condition: like new (used), functionality: fully functional, lifting height: 10,000 mm, main lifting speed: 6,300 mm/min, Double rail trolley 16/4t and also 2x available consisting of: Main hoist 16t with mechanical feeder Type AS6040-25 4/1 L2 Reeving 4/1 Lifting speeds 6.3/0.63m/min Lifting height 10m FEM 3M Ioderbyqkepfx Adnsa 2-fold load hook Fine lift 4t SH5020-25 2/1 Reeving 2/1 Lifting speeds 12.5/2m/min Lifting height 12m FEM 2M Single load hook super condition, hardly used, incl. load collective memory and load totalization, incl. hook block, electrics 400/230V, trolley track 1400mm, trolley travel 20/5m/min