TROLLEY with IDLE TROLLERS

SIRIO 2500X600

Condition: new, Year of construction: 2024, Magnetic separator for chip transport line Pipe magnet with 4 magnetic plates (permanent magnet) Hinged door for easy removal of metal parts Gsdpocqvhwsfx Agbstt Pipe diameter: 180 mm Location: From stock 54634 Bitburg - available immediately -

Condition: as good as new (ex-display), FULL LINE of Double-side Sizing-Milling & Edge Banding. Composed of the following machines: VZ0200A) Gantry-portal Loader (Double pick-up station) "BARGSTEDT" Mod. TBH 500/D/30/12 VZ0200B) 1st Double-side Sizing & Edge Bander "HOMAG" Mod. KFL 525/8/A3/15 VZ0200C) In-feeding Rollerway "HOMAG" Mod. TDL 310/30/12 with 90° Turning device (from Gedpfx Agodt Rgvsbott lenghtwise to crosswise) with double cone system VZ0200D) 2nd Double-side Sizing & Edge Bander "HOMAG" Mod. KFL 526/10/A3/30 VZ0200E) In-feeding Rollerway "HOMAG" Mod. TDL 510/25/12 with 90° Turning device (from crosswise to lenghtwise) with double cone system VZ0200F) Cleaning machine "WANDRES" VZ0200G) Gantry-portal Stacker (Double pick-up station) "BARGSTEDT" Mod. TSP 410/D/25/12

Condition: excellent (used), UNLOADER (SINGLE-CAGE) - Vacuum system with its pump Godpecggy Ssfx Agbstt - Top holding bar deplacement (pivoting) of 180° - Horizontal-longitudinal bars (rocker arms) for the vacuum cups supporting - In-side lifting table, surface with motorized-rollers - Front-side sliding door (or metal grid) to out-feed the stack of the panels - Separated electric and command panel - Out-side rollers way (on ground) to out-feed pile of panels from the Unloader - Out-side motorized rollers table (which brings panels to the Unloader), with also cross motorized conveyor belts (at 90°) - Working capacity (cycles/min): 12-15 - Min/Max panels thickness mm 10 - 40 - Min dimensions of the panels mm 250 x 320 (estimated) - Max dimensions of the panels mm 1200 x 3000 - Total installed motor power KW 10

Condition: excellent (used), Year of construction: 2007, High speed moulder infeed comprising a freestanding flat magazine for use in front of a high speed moulder. The infeed magazine is driven by hydraulic motors powered by an 11kW hydraulic unit (max 150m/min). 15kW hydraulic unit (max 200m/min) possible to offer also. Suitable for 300mm wide feed material. A buffer of feedstock is alligned laying flat side by side on the chain cross feeder. The chain feeder transports parts across to the fence. The part next to the fence is detected by a light beam and the the first roller is raised to allow entry and the transport roller then pushes the workpiece under the feed rollers of the planer. The first feed roller of the planer needs to be freewheeling roller to allow operation of the EM814. Gjdpfx Aoggghmjgbett

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, functionality: fully functional, total length: 9,100 mm, total width: 3,600 mm, Our company is a manufacturer of machines and devices for prefabrication plants. We produce fixed assembly tables, rotary tables, butterfly tables and complete production lines We offer a new assembly table measuring 3.6m x 9.0m - Powder coated construction - Table covered with plywood board with impact-resistant coating - holes for mounting SD-01 pressure actuators - removable and adjustable limiting pins Gsdpfx Agsvv Rv Asbstt - modular construction for self-assembly (one pallet) - low transport costs throughout Europe

Year of construction: 2023, condition: new, Chopping height max. mm. 200 Infeed width mm. 500 Infeed rollers piece 3 Rotor flight circle mm. 600 Chopping length approx. mm. 20-30 output - output 16 - 20 rm/h chipping Chipper blade piece 2 Feed motors kW 2x2,2 Weight approx. net kg 4100 Inlet : horizontal machine base : steel, inert gas welded Rotor : steel, inert gas welded, dyn. balanced. Bearing : Oversized roller bearings. Bearing housing : Steel, flanged housing. Feed rollers : steel, special toothed. Chip outlet : underneath the machine. Gtodpfjncd Azex Agbst Machine grate : (sieve) for secondary crushing of excess lengths. Drive pulley : Matched to main motor N=1500 min-1 Hydraulic system : consisting of: Hydraulic pump, diaphragm accumulator, cylinder, pressure gauge, control valves for lifting of the upper feed roller. Feeding : by 2 gear motors, Make NORD GEAR

Year of construction: 2002, condition: reconditioned (used), Fully automatic finger jointing line: Type Doppel-Pack with automatic feeding With multiple crosscut saw With automatic stacking machine Specification: Wood input length: min. 150 mm max. 1000 mm average 400 mm wood cross-section: min. 20 x 40 mm max. 80 x 180 Wood exit length: 6030 mm max. Wood cross section with 10 mm tine size: Hardwood 120 cm² softwood 150 cm² Tine design vertical and horizontal Glue type. PVAC white glue, 2-sided glue application Electric power: Supply voltage: 400 V Control voltage: 24 V 50 Hz System completely wired up to the control cabinet. Tine length / possibly wood cross-section and glue type can still be adapted. Capacity: 6 milling tables/ min working height: 960mm table width: 600 mm glue application: double-sided application Gtodeg D Ugkspfx Agbet Technical parameters: Input material: Input length of parts (min. - max.): 150-1000mm Part width (min. - max.): 40-155 Part thickness (min. - max.): 20-80mm Working height : 960mm Bundle width: 600mm Glue application: double-sided application (on both sides of the

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Edges thickness in strips/lippings (Min/max) mm 3 / 10 Panels thickness (min/max) mm 8 / 60 Working width (min/max) mm 236 / 3300 Numerical Control /Software ICOS Open Adjustable feeding speed (m/min ) 10 - 50 - Without Transmission bar (Master & Slave system) Distance (center-axes) of the Disappearing Dogs (mm) 1080 SIZING PART (for each side): Anti-chipping Milling Unit 75.186 (1 x Kw 4,4) Hogging Units (2 x kW 8) Free Space (for Milling unit) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt Glue) 04.1570 + 283.205 Band Pressure zone - Edge coils supporting unit (No. 6 reels) Gtodpfx Agjd Nt Rqjbst Snipping (end-cutting) unit 08.42 (2 x Kw 0,66) speed 30 m/min (0° - 25) Fine Trimming unit 08.055 (2 x Kw 1) / 0° - 30° Multi Function Unit (Profile contour Trimming unit) 08.342 (2 x Kw 0,66) with servo-motors Profile edge scraping unit 08.519 Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.617-4 (4 x Kw 0,18) Milling grooving unit 08.190 (1 x Kw 4,5) 90°-180°-270°

Condition: used, - Adhesive application with 1 profiled roller for Packaging height 300mm over 1 application roller - The drive via worm gear motor 0.37 kW - 1 ST left - 1 ST right - Fits DIMTER HK 200 and HK 400 spare parts dimter in stock equipment in stock Gtodpfx Agecht Nyebet accessories in stock

Year of construction: 2023, condition: new, Fully automatic horizontal stretchfilmwraping machine with air bubble film unit SPINNER 1500s + BN Application: Packaging, grouping and protection of long or bulky products like furniture, doors, timber boards, etc. operator side: - in throughput direction right General machine features: - Main motor power: 2,2 kW - Max. ring rotation speed: 50 rpm - Min. ring rotation speed: 10 rpm - Electronic control components: Siemens , Schneider, LS - Total weight: 1600 kg Standard Equipments; - Driven conveyors belt (infeed and outfeed) for automatic product feeding - Adjustable ring rotation speed - Adjustable stretchfilm tension with mechanical brake device - Automatic stretchfilm clamp and cutter system - Automatic stretchfilm hooking system - Pneumatic front and back top presses to hold the product while wrapping - Photocell to start automatically the wrapping cycle - Touch screen to adjust machine parameters to the product needs - Operator safety systems Optional Equipments; - Different sized conveyors - Infeed and outfeed rollers - Air bubble film unit. (INCLUDED FOR THIS OFFER) Technical features: Product to Wrap Sizes - Max. length: Unlimited - Min. length (wxhxl): 100x18x550 mm Conveyor belt’s features: - Useful length: 1924mm - Total length: 2000mm - Working height: 900mm - Electric motor power: 0,75 kW - Max. speed: 10 m/sec. Gtjdpfxefuwrcs Agbot - Max. Load Capacity: 150kg/ m Stretchfilm features: - Max. width: 250mm - Max. diameter: 230mm - Reel core diameter: 76mm - Recommended thickness: 23, 30, 35 micron Air bubble film unit: - Max. film width: 1350mm - Max. film reel diameter: 700mm - Reel core diameter: 20~76mm - Suitable film materials: PW film, PE air bubble film, PVC film - Cutting & welding system operating temperature: 50°C~150°C