3D SLS Printer Sinterit Lisa X Set

SINTERIT Lisa X SLS Performance Set

Condition: excellent (used), Desktop Metal 3D Printer Complete System Here we offer you Desktop Metal 3D printer complete system. Desktop Metal 3D printer studio system Complete system: 3D printer + debinding machine + sintering furnace Desktop Metal The three-part solution includes 3D printer, debinder and furnace Manufacturer Desktop Metal Model Desktop Metal Studio System Operating condition Used (Good) Year of manufacture 2019 Desktop Metal Studio System Includes: 1.1 Desktop Metal Studio 3D Printer Bound Metal Deposition (BMD) Technology. Features: Printed materials metal Technology FDM Use Industry Other features Office X-stroke 30 cm (12 in) Y-stroke 20 cm (8 in) Z-stroke 20 cm (8 in) Description: Unlike laser-based systems that selectively melt metal powders, the printer extrudes bonded metal rods - similar to an FDM printer. This eliminates the safety requirements often associated with metal 3D printing, and it enables new features such as the use of closed-cell fills for lightweight strengths. 1.2 Desktop Metal Studio debinder (delamination machine) fully automatic debinding Cleaning tank: 17.4 L (in process) / 22.5 L (stock) Description: The debinder prepares green parts for sintering by dissolving the primary binder. With a low emission design, it requires no external ventilation and is safe for an office environment. Automatic liquid distillation and recycling means no need to refill between cycles. 1.3 Desktop Metal Studio Sintering Furnace hybrid technology (microwaves & conventional heating elements) Installation space 305x205x205mm Carbon housing Gas supply: 2 x 900 L gas cylinders Heating power: 20 kW Features: Function Sinter Configuration Chamber Hnsdpfek Hz Nqsx Ah Neg Heat source gas Other features High temperature, automatic Maximum temperature 1,400 °C (2,552 °F) Description: Fully automated and sized to fit through an office door, the furnace delivers industrial-grade sintering in an office-friendly package. Built-in temperature profiles matched to each design and material provide uniform heating and cooling without the residual stresses associated with laser-based systems. Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: good (used), Year of construction: 2004, Clampable cutter head type (max.) 460 mm Cutter head weight (max.) 150 kg Mounting disc diameter for cutter heads (Ø) 360 mm Mounting cone for cutter heads Nominal diameter Ø 58,227 mm travel -z axis 200 mm diagram-drawing enlargement ±10 - ± 500 µm weight of the machine ca. 2,3 t dimensions of the machine ca. 2 x 1,5 x 2,03 m In the manufacturing process for spiral-toothed bevel gears, the quality of the gear cutting gear cutting tools used plays a decisive role. Particularly in high gear cutting quality and a long service life can only be achieved with precisely can only be achieved with precisely adjusted cutterheads. The Oerlikon cutterhead setting and testing device CS 200 enables quick and easy setting of the individual knives and simple adjustment of the individual knives, it checks the position and documents the measurement results. The measuring sequence on the CNC-controlled testing device is partially automated: The individual actions for carrying out the actions for carrying out the Hsdpfx Ahjul Efmj Njng sequence are displayed on the screen via the operator guidance. The positioning of the individual knives in the cutter head and the height of the knife tips is largely automatic thanks to a special sequence and is simultaneously documented by means of a run-out diagram. A subsequent measuring sequence checks the radial position of the inner and outer cutting edges of all knives in the cutterhead. If individual test parameters on the knives do not correspond to the the tolerance specifications, this can be individually repositioned. The combination of semi-automated setting sequence, operator-guided set-up actions and automatic operator-guided set-up actions and automatic measuring sequence, cutterheads can be can be set conveniently, quickly and with high precision. Operator-guided setting and test sequence - Graphic display of the cutter head design and the measurement results with tolerance check - Instructions for the operator in plain text Instructions for the operator in plain text (without coded information) - Simple assignment of the measurement results to the knives - Documentation of the setting and measurement results via printer- Setting and test sequence suitable for ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® types - Interface for neutral data

Condition: new, functionality: fully functional, Year of construction: 2025, laser type: fiber laser, laser source manufacturer: MAX, laser power: 6,000 W, warranty duration: 12 months, Equipment: CE marking, cooling unit, dust extraction, Brand new 4th generation laser cutting system SF3015H is designed for high laser power outputs up to 20KW. Our laser cutter is equipped with a MAX 5G 6KW laser source! Integrated control cabinet included. The system features an automatic pallet changer, which significantly reduces loading times. The machine bed is reinforced. The machine has an automatic smoke extraction system. Machine controls are in German. HANLI water chiller. Purchase ex-stock Büren, including setup and training, with a 1-year warranty. For further inquiries, please contact us directly! Hnedpfjk R T Nmox Ah Nog

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, operating hours: 22,351 h, control type: CNC control, degree of automation: semi-automatic, laser source manufacturer: Trumpf, laser hours: 17,317 h, laser power: 4,000 W, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 15 mm, sheet thickness aluminum (max.): 10 mm, working length: 3,000 mm, working width: 1,500 mm, travel distance Z-axis: 115 mm, repeat accuracy: 0.03 mm, type of cooling: water, overall weight: 12,000 kg, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, safety light barrier, For sale: TRUMPF TruLaser 3030 with LoadMaster automation Machine installed in June 2021. Serviced exclusively by TRUMPF Slovakia, with professional maintenance performed regularly every six months. Machine in excellent condition, equipped with LoadMaster automation. Sheet metal cutting up to 25 mm thickness. Type and power of resonator: CO₂, 4 kW. Maximum working area: 3000 × 1500 mm. The machine will be in operation until the end of December 2025; inspection in full operation is possible at any time. Hnsdpfx Ahjwya Two Njg Full service history documentation will be provided.

Condition: ready for operation (used), Year of construction: 2005, operating hours: 52,455 h, functionality: fully functional, machine/vehicle number: 2501-0154, turning length: 600 mm, turning diameter over cross slide: 140 mm, turning diameter: 300 mm, spindle motor power: 25,000 W, spindle speed (min.): 5,000 rpm, spindle speed (max.): 5,000 rpm, travel distance Z-axis: 900 mm, rapid traverse X-axis: 3 m/min, rapid traverse Y-axis: 3 m/min, rapid traverse Z-axis: 3 m/min, rotational speed (max.): 4,000 rpm, rotational speed (min.): 4,000 rpm, torque: 239 Nm, bar passage: 80 mm, feed rate X-axis: 165 m/min, feed rate Y-axis: 165 m/min, feed rate Z-axis: 220 m/min, overall weight: 10,500 kg, Equipment: documentation/manual, Machine is still in use and can be seen working at VOVU Machining in Uden. In total there are 6 identical machines here. Fanuc 310is controller Hjdpfsur Hfzox Ah Nsng

Year of construction: 2025, condition: new, Nominal capacity 3000kg/h (depending on fruits & operating condition, up to 6000kg/h) Yield up to 75% Belt width/length: 1000mm/approx. 7000mm Hnjdpfxoygmwj Ah Njg Working width/high: 900mm/0-50mm continuously Belt speed continuously variable 1,0-5,2m/min Electrical supply: Drive motor 2,2 kW 400V Washing motor: 0,25 kW 400V Waterconsumption for belt cleaning: Approx. 3 l/operating minute Weight approx. 2300kg Dimensions: (lxwxh) 2750x1890x1690mm without high-pressure cleaner and without compressor

Condition: good (used), Year of construction: 2001, functionality: fully functional, Grinding wheel 508x254 (305) mm, regulating wheel 330x254 (305) mm, regulating wheel speed 0-115 rpm, grinding wheel rotation speed 45 m/sec, grinding diameter 2-150 mm, grinding wheel drive 45 kW, machine weight 6.5 tons, space requirement approx. 3.0x1.5 m The machine will be equipped with a new Siemens S7 control system with new control panel, dressing quill SS electrically controlled via servo motor. Machine will be completely checked, defective parts repaired or replaced. Various options possible (KM system, infeed/outfeed, workpiece rulers etc.) Hjdpouy Ifgsfx Ah Neng

Condition: like new (used), Year of construction: 2006, Technical data Manufacturer: KENT Model: VK 1600MC Year : 2.006 Serial number: 2200139 Control unit: FANUC 18 iMD Location: Tabaza (Asturias - Spain) Table Dimensions Working Surface: 1700 x 810 mm. T-Slot ( Size x Number x Center distance): 22 x 5 x 160 mm. Max. Table Load: 2.000 kg. Travel X axis traverse: 1600 mm. Y axis traverse: 815 mm. Z axis traverse: 815 mm. Distance from Spindle nose to table: 220 ~ 1035 mm. Distance from Spindle center to Column: 865 mm. Spindle Taper: BT50 Spindle speed (Gear type): 30 – 6000 rpm. ZF GEAR BOX (2 ranges): Yes Max. Tool Weight: 15 kg. Max. Tool Size (Diameter x Length): 125 x 300 mm. ATC Max. tool Ø x L: Ø125 x L250 Max. tool weight: 15 kg. Number of tools: 32 Feedrates Cutting Feed Rate: 1 – 10.000 mm./min. Rapid Traverse: 18/18/18 mm./min. Motor Spindle Drive Motor (30 Min Rating): 15/18,5 Kw. X,Y,Z Axis Drive Motor: X: 5.5 | Y: 5.5 | Z:5.5 Coolant Pump Hnedpfjqwyzfjx Ah Neg CTS: One air & two coolants – 4 bar. + 6 bar / 20 bar Weight and dimensions Machine weight: 16.150 kg Machine dimens: 4.488 x 3.448 x 3.250 mm. Base space: 5.000 x 3.500 mm.

Condition: used, Year of construction: 2019, Suitable for the additive manufacturing of high-precision 3D components using the SLM powder bed process. Materials: Tool steel, stainless steel, cobalt-chromium alloys, titanium, aluminum, precious metal alloys, and Inconel. Accessories: Total enclosure, rePLUG "Standard" powder unit for powder storage and powder feed, extraction of metal powders from the process chamber, and automatic sieving. CELOS for LASERTEC SLM Fire extinguishing system al-deco-STD - Extinguishing unit: 5-liter argon cylinder CELOS App II OPTOMET (Basic) software package for automatic prediction and optimization of process parameters for selected materials: Max. travel X-axis: 325 mm Max. travel Y-axis: 325 mm Max. travel Z-axis: 400 mm Installation space size: 300 x 300 x 300 mm³ Layer thickness: 20 - 100 µm laser type: Ytterbium laser Laser power: max.: 400 W Focus diameter min: 35 µm tank volume: 50 dm³ Connected load approx.: 400 V / 50 Hz Weight approx: 1200 kg Hnedpewhiycjfx Ah Nog colour: Light grey, dark grey, red

Condition: new, Year of construction: 2026, functionality: fully functional, air demand: 1.13 m³/h, pressure: 7 bar, warranty duration: 24 months, total width: 1,370 mm, total height: 2,080 mm, total length: 1,150 mm, overall weight: 350 kg, Equipment: cabin, lighting, The Vapormatt PUMA is a high-quality and versatile manual wet blasting cabinet from Vapormatt, the leading company in the wet blasting sector and the inventor of this technology in the 1950s. Over more than 70 years of development, Vapormatt has engineered the PUMA to be both ergonomic and efficient. With an optional insertable basket, small batch parts can be processed, and a clamping device enables easy handling of rims or wheels. Large workpieces weighing up to 125 kg can also be placed on the robust stainless steel grid. For easier operation, an optional stainless steel rotary table is available. The integrated recirculating water system with cascade tank, filter unit, and return pump ensures efficient use of water and blasting media. Compared to sandblasting, wet blasting allows for gentler and more uniform processing, thanks to water as the carrier medium. This technique enables you to achieve smooth and consistent surfaces on your parts. Technical data: - Internal dimensions: 1100 x 1100 x 1200 mm (LxWxH) - External dimensions: 1400 x 1200 x 2100 mm (LxWxH) - Pump output: 2.2 kW (400 V / 50 Hz) - Sump volume: approx. 142 L water / approx. 15–40 kg abrasive media - Work surface load capacity: 125 kg Prices are net plus the current applicable statutory VAT and shipping costs. The images may show the machine including optional accessories, which are available at additional cost. If you are interested, we look forward to hearing from you. We are happy to provide professional and non-binding advice. The European Commission provides a platform for extrajudicial online dispute resolution (the OS platform). Hsdpfx Aotqmh Eeh Njng This offer serves exclusively as an online presentation of our products. Contract negotiations are conducted via telecommunication (email, telephone, online messaging platform). In the first step, we will provide you with a non-binding offer, together with information about our general terms and conditions with legal notice and your right of withdrawal, before any purchase or conclusion of contract takes place.