SIFA Idrokeg 21 KEG Washer (2020)

SIFA KEG Wascher

Condition: ready for operation (used), A MWT reverse osmosis system is available. Capacity: approx. 800l/h. On-site inspection is possible. Pgsdpswxfamefx Ahyjk

Condition: used, Year of construction: 2007, Used Filling Monoblock Cimec America The Used Filling Monoblock Cimec America model DPS 6/6/1C is an advanced isobaric bottling solution designed for the precise rinsing, filling, and capping of carbonated beverages. Engineered with industrial-grade stainless steel and based on a robust mechanical architecture, this monoblock is tailored for small to medium-sized beverage operations seeking reliability, hygiene, and consistent process control. This CIMEC monoblock integrates three essential stations into a compact, fully automatic system. The configuration includes a bottle rinsing unit, an isobaric filling carousel, and a crown capping station, all enclosed within stainless steel safety guards with transparent access doors for operational monitoring and safety compliance. Isobaric Filling Technology and Construction At the heart of the Used Filling Monoblock Cimec America is its isobaric filling carousel, specifically engineered for carbonated liquids such as beer, sparkling wine, kombucha, cider, and similar beverages requiring careful handling to preserve carbonation and minimize product loss. The filling station features stainless steel isobaric valves connected to a pressurized product tank, ensuring precise equalization between the internal bottle pressure and the product tank before the filling cycle begins. Pgedpfjw Hr Awsx Ahysk The isobaric filling method is characterized by maintaining a constant counter-pressure using CO₂ or other inert gases. This technology allows the product to enter the bottle under pressure, minimizing the formation of foam and the risk of de-gassing, which is critical for carbonated drinks. Filling is performed at a controlled rate, typically using a “level” principle where the filling valve shuts off when the liquid reaches a predefined height within the bottle, guided by dedicated overflow tubes. All product-contact surfaces are manufactured from high-quality AISI 304 stainless steel, ensuring full compliance with sanitary standards required in the food and beverage industry. The filling station is equipped with pressure gauges and safety valves, allowing for fine-tuned process adjustments and safeguarding both the operator and the product. The system accepts a range of bottle sizes from 0.22 liters up to 1.5 liters, providing operational flexibility for various production formats. Changeover between bottle sizes is managed manually, with adjustable guides and supports. The monoblock is configured for crown cap application (26 mm diameter), using a dedicated capping turret with mechanical sorting and feeding of the crowns. The design enables precise and secure sealing, vital for maintaining carbonation and product integrity. Automation, Utility Requirements, and Operational Safety This Used Filling Monoblock Cimec America operates as a fully automated rotary triblock, requiring minimal manual intervention during normal production cycles. Mechanical synchronization ensures seamless bottle transfer between stations, supported by motor-driven conveyors and rotary starwheels for accurate positioning throughout rinsing, filling, and capping.

Condition: used, Technical details: Pgjdou Nw Enjpfx Ahyjk tank capacity: - l voltage: 230 / 50 V / Hz weight of the machine approx.: Anlage ist demontiert kg OSMOSIS SYSTEM The system has been dismantled. We are selling the system/parts at cost price! Areas of application, e.g.: All types of contaminants are filtered out. e.g. bacteria, viruses, pesticides, nitrate, fertilizer residues, lime, salts The system was preserved in 2014. i.D. *

Condition: excellent (used), - Atmospheric pressure - Tanks for the fermentation and storage of wine or beer - Dome 400 mm made of AISI 304 stainless steel - Nitrogen connection with stainless steel 3/8" ball valve - Cleaning line with DIN 32 connection - AISI 316 stainless steel cleaning ball Ø 65 mm - Level indicator with return flow into the container - Sampling - Bottom conical 30° - Residual drain Disc valve DIN 25 - Clear drain Disc valve DIN 25 - Bimetal thermometer made of stainless steel -20 °C/+80 °C with 200 mm long shaft - 3 adjustable feet in stainless steel - Dimensions: Ø 800 x 1950 mm (h) Pgodpferigczsx Ahyek - High-gloss polished inside, marbled outside

Year of construction: 2012, condition: used, 3 cylindroconical fermentation and storage tanks with frame and cone cooling Additional title: 3 pieces, with frame and cone cooling Total volume: 3000 l Pressure capacity: 3 bar Length: 1860 mm Width: 1860 mm Height: 3700 mm Pedpfx Ahjxwy Tpjyogk Material: stainless steel Base construction: standing on feet Features: frame and cone cooling, sampling tap, DN50 connection; panel with valves;

Condition: used, Condition: Used Stock number: 3175 Dreher brewhouse with 2 kettles Type: KBA500 Dreher brewhouse with 2 kettles Year of manufacture: 2006 Dreher brewhouse with 2 kettles Boiling kettle: 550 litres Dreher brewhouse with 2 kettles Heating: 42 kW 3x Dreher fermentation tanks Type: GW500 3x Dreher fermentation tanks Year of manufacture: 2006 Psdpfxeyzyy Hs Ahyogk 3x Dreher fermentation tanks Capacity: 520 litres 3x Dreher / Brovarni serving tanks Type: 500 L CCT 3x Dreher / Brovarni serving tanks Year of manufacture: 2017 3x Dreher / Brovarni serving tanks Capacity: 500 litres 1x Dreher brite tank Capacity: 1,000 litres 6x Dreher combination tanks Type: KT500 6x Dreher combination tanks Year of manufacture: 2006 6x Dreher combination tanks Capacity: 500 litres 5x FIB beer tanks Type: 70200503 5x FIB beer tanks Year of manufacture: 2022 5x FIB beer tanks Capacity: 540 litres Control system: KBA Basic with Dreher ZKV120 cooling Auxiliary equipment, including: - Gail 103 grain mill - Enotecnica Pillan srl F30 20x20 filter - Serrco SW-150 cold water tank - bottle washing station - bottle filling machine - capping device - 45x 20-litre kegs - work table - double sink

Condition: used, Year of construction: 2016, Overview This 5 hl brewhouse was manufactured in 2016 by easybräu. The brewhouse consists of 2 vessels and is designed for beer brewing. It is currently still installed and can be visited at any time. The system is electrically heated; steam heating is possible. Valves are manually operated. The brewhouse is being sold because a larger system has been purchased. The brewhouse is immediately available and can be seen in person upon request. Technical data  Capacity: 5 hl Configuration: 2‑vessel brewhouse, manually operated valves Heating: Electric (steam possible) Temperature control: Yes Recipe management: Recipe storage available Utilities: Electric power (steam optional) Pedpfoymg Hpjx Ahyjgk

Condition: used, Year of construction: 2015, Overview  This tank package was manufactured between 2015 and 2025 by Spanish manufacturers Inox GC and Magusa, as well as German company Linde AG. It includes multiple isobaric and atmospheric fermenters, an electric lifter and a hop torpedo for pressure dry hopping. Technical data & Scope of Delivery  Isobaric Fermenter (Unit 1) | Inox GC | — | 2016 | 1,500 L; cylindro-conical; isobaric; double refrigeration jacket Isobaric Fermenter (Unit 2) | Inox GC | — | 2016 | 1,500 L; cylindro-conical; isobaric; double refrigeration jacket Isobaric Fermenter (Unit 3) | Inox GC | — | 2016 | 1,500 L; cylindro-conical; isobaric; double refrigeration jacket Isobaric Fermenter | Inox GC | — | 2019 | 2,000 L; cylindro-conical; isobaric; dual glycol jacket Isobaric Fermenter | Inox GC | — | 2021 | 3,000 L; cylindro-conical; isobaric; dual-wall cooling Isobaric Fermenter | Inox GC | — | 2024 | 4,800 L; cylindro-conical; isobaric; Double jacket for glycol circulation; carbonation stone in the cone Atmospheric Fermenter (Unit 1) | Magusa | — | 2015 | 1,300 L; atmospheric; double cooling jacket Atmospheric Fermenter (Unit 2) | Magusa | — | 2015 | 1,300 L; atmospheric; double cooling jacket Electric Lifter | Linde AG | L14 | — | Electric; 1,400–1,700 kg load capacity Isobaric Hop Torpedo | Inox GC | — | 2025 | Approx. 50 L; vertical isobaric dry hopping vessel; new Pedpsyb S Dvsfx Ahysgk

Condition: used, Year of construction: 2013, Overview This KeyKeg filling machine, MICROMAT M1/1‑F KeyKeg, was manufactured in 2013 by Germany m+f KEG Technik. The machine is designed for filling KeyKegs and was used in a brewery. The equipment is no longer required by the seller and can be visited at any time on request. Technical data  Formats: KeyKeg Application: KEG filling Operating pressure: 5.5 bar Electrical supply: 230/400 VAC Control voltage: 24 VDC Frequency: 50 Hz   Pgjdpfsyq Ia Eex Ahyek

Condition: used, Year of construction: 2010, Overview  This complete 600L brewhouse and fermentation line was manufactured between 2009 and 2014 by Cespedes (Spain) and Cerveza Artesana SL. It includes mashing and boiling kettles, fermenters (both isobaric and atmospheric), utilities, and packaging equipment. The line was used for small-scale craft beer production and remains in good overall condition, available immediately. Technical data Main Manufacturers: Cespedes, Cerveza Artesana SL, Stellin, Duofiller Year of Manufacture: 2009–2014 Capacity: 600L brewhouse / fermenters up to 1,200L Heating System: Electric resistances (mash & boil kettles) Filling System: Semi-automatic can and bottle filling Utilities: Includes pumps, heat exchanger, and carbonation equipment Condition: Good, complete and ready for installation Scope of Delivery  Mashing tun | Cespedes | – | 2010 | Dimensions in cm: 200×110×110 | 600 L, electrically heated (2×4500 W) Wort pan | Cespedes | – | 2010 | Dimensions in cm: 140×100×100 | 600 L, electrically heated (2×4500 W) Atmospheric fermentation tank | Cespedes | – | 2010 | Dimensions in cm: 240×90×90 | 500 L Atmospheric fermentation tank | Cespedes | – | 2010 | Dimensions in cm: 230×90×90 | 500 L Isobaric fermentation tank | Cespedes | – | 2012 | Dimensions in cm: 230×130×130 | 578 L, 1.1 bar Isobaric fermentation tank | Cerveza Artesana SL | Serbato10 | 2014 | Dimensions in cm: 285×130×130 | 1,200 L Hot water tank | – | – | – | Dimensions in cm: 150×90×90 | 450 L, electrically heated (2×3200 W) Cooling plate | Cespedes | – | 2010 | – | 172 kW, 10 bar Pump | Ebara | CDHM 90/10 MF | – | – | Stainless steel Pump | Tellarini | ALM25 | – | – | Bidirectional Grind mill | Cespedes | – | – | – | – Filling machine | Duofiller | Core G3 | – | – | Semi-automatic Can sealer | Cannular | – | – | – | Semi-automatic Labeling machine | Stellin | PE-A | 2009 | – | 0.09 kW, 230 V, 50 Hz Carbonation stone | – | – | – | – | 0.5 µm Pgjdoyb Sxyepfx Ahyek