Central lubrication

Showa MLA-03W

Condition: excellent (used), Year of construction: 2008, overall weight: 1,195 kg, volume flow: 7.25 m³/h, operating pressure: 13 bar, input voltage: 400 V, ATLAS COPCO GA 37 VSD ff screw compressor Variable speed, (inverter) With refrigerant dryer 37 kW motor Lhedot Hdh Nepfx Affer Capacity 7.25 m3/min Pressure 13 bar Mileage 13200 hours The compressor is fully functional.

Condition: used, machine/vehicle number: 11481, Rotor diameter: 300 mm Lhodpfx Aeghgmzeffjr Rotor width: 600 mm 3-blade rotor 4 rows of stator blades Inlet cross-section approx. 250 x 600 mm Drive motor 37 kW

Condition: excellent (used), Year of construction: 2013, Kaeser screw compressors - various models Lsdpfeqcu Rcox Affshr

Condition: used, Year of construction: 1992, closing pressure 600 kN clamping plate 460x460 mm distance between columns 300x300 mm weight of the machine ca. 4,5 t lock stroke 230 mm capacity of ejector 40 kN ejector stroke 70 mm height of form 120-350 mm column diameter 56 mm casting capacity 55 kN casting plunger stroke 130 m/m injection plunger diameter 45,50,55 mm casting volume (DIN 24480) 76,121,165 cm 2 volume cast pressure 345,280,231 kp/cm² casting area 174,214,260 cm 2 Lhjdofrvzvspfx Affjr Traverse Stroke 150 m/m Used Die Casting machine DAW 50 with SBC 2 control for the use of zinc alloys. Available from used machine stock. The machine is equipped with an electric furnace from Rauch Typ MO50E and used pneumatic sprayer 401. Recommendation from the manufacturer is some repair / general overhaul in the overhaul plant. It can be carried out in the scope of agreement.

Year of construction: 1988, condition: used, weight max. in kg 6000 kg fork length 1900 mm 89% serial number GEF 2240 height of stroke 3300 mm Ljdpfx Afjrxxbtsfshr weight of the machine ca. 9650 t

Condition: new, Year of construction: 2025, Cut-to-length and mitre saw type: ZS 200 N - 5 KW motor with machine stand, Machine via handwheel and worm gear (rear) Tiltable Saw blade diameter 520 mm, saw blade mounting hole 50 mm Lhodpfx Ajk H Ic Usffsr Saw blade speed: 2800 rpm 400 volt / 5 KW (S6/40%) motor with brake and automat. Star delta motor control Cutting width at 90 degrees: 420 mm Cutting width at 45 degrees: swiveled: 295 mm Cutting height at 90 degrees: 200 mm Cutting height at 45 degrees inclined: 140 mm Saw can be swiveled on one side up to approx. 25 degrees to an acute angle and tilted flat to the left up to 30 degrees Carbide circular saw blade 520x4.0/2.8 x 50 mm 60 WZ neg. for wood RLH-ST60 6.0 mtr. measuring length, mounting side: left Cross-cut fence / roller conveyor, heavy-duty design, Stop slide adjustable from the workstation via handwheel, electronic-digital dimension display, pneumatic clamping of stop slider, stop flap folds backwards, with steel rollers 60 mm diameter, roller spacing 200 mm, 400 mm roller width, with 4 support feet and connection piece: overall length: 6.7 mtr. Surcharge for digital electronic display unit type: FIAMA EP6 for 230 V mains operation, with electric on/off switch and socket. Powerful dark red LED display. Higher accuracy than the battery-powered crystal display RO-ST60 4.0 m long feed roller conveyor Mounting side: Right Heavy-duty design, steel rollers: 60 mm Diameter, roller spacing: 200 mm 400 mm roller width, 3 support feet and connection piece Location: From stock 54634 Bitburg - immediately available - Picture: similar. Machine is still in original packaging

Condition: new, Year of construction: 2025, Cutting height at 90°: 170 mm Cutting length: 430 mm miter range horizontal: 45°-90°-25° Miter range vertical: 60° - 90° - 30° Pivot adjustment with crank: yes roller conveyor / support table: yes Saw blade diameter: 420 mm Speed: 2800rpm Engine power: 3 kW Motor brake: yes Suction connection: 100mm Length roller conveyor: 2 x 1500 mm Machine length: 4000 mm Machine width: 1250 mm Machine height: 1550 mm Weight: Ljdpfx Afsizkhvefjhr

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 2024/121/47, saw blade diameter: 420 mm, GRAULE cross-cut and mitre saw Type ZS 170 N (tiltable) Lodpfxetwz Tle Affohr 400 Volt three-phase brake motor 2.2 kW Saw blade diameter 420 mm Saw blade holder 40 mm Cutting height 170 mm, Saw blade tilted to 45°: cutting height 115 mm, cutting length 410 mm incl. the following accessories: 1 pc. Machine can be tilted by hand crank from the rear on both sides from 90° to the left by 45° and to the right by approx. 30° to approx. 60° 1 pc. Carbide circular saw blade 420x3.4/2.4x30 mm 48 WZ neg. for wood 1 pc. Machine stand

Condition: like new (used), Year of construction: 2006, Technical data Manufacturer: KENT Model: VK 1600MC Year : 2.006 Serial number: 2200139 Control unit: FANUC 18 iMD Lhsdpfx Asqwyzfjffjr Location: Tabaza (Asturias - Spain) Table Dimensions Working Surface: 1700 x 810 mm. T-Slot ( Size x Number x Center distance): 22 x 5 x 160 mm. Max. Table Load: 2.000 kg. Travel X axis traverse: 1600 mm. Y axis traverse: 815 mm. Z axis traverse: 815 mm. Distance from Spindle nose to table: 220 ~ 1035 mm. Distance from Spindle center to Column: 865 mm. Spindle Taper: BT50 Spindle speed (Gear type): 30 – 6000 rpm. ZF GEAR BOX (2 ranges): Yes Max. Tool Weight: 15 kg. Max. Tool Size (Diameter x Length): 125 x 300 mm. ATC Max. tool Ø x L: Ø125 x L250 Max. tool weight: 15 kg. Number of tools: 32 Feedrates Cutting Feed Rate: 1 – 10.000 mm./min. Rapid Traverse: 18/18/18 mm./min. Motor Spindle Drive Motor (30 Min Rating): 15/18,5 Kw. X,Y,Z Axis Drive Motor: X: 5.5 | Y: 5.5 | Z:5.5 Coolant Pump CTS: One air & two coolants – 4 bar. + 6 bar / 20 bar Weight and dimensions Machine weight: 16.150 kg Machine dimens: 4.488 x 3.448 x 3.250 mm. Base space: 5.000 x 3.500 mm.

Condition: used, Year of construction: 1997, through-put width 1200 mm working heigth 1200 mm Lhodpfx Afsvlzzusfsr depth of chamber 1200 mm operating pressure 6,0 bar voltage 380 V weight of the machine ca. 1,4 t dimensions of the machine ca. 1,40 x 1,70 x 2,70 m - Serial-no.: 340997-466 - Pressure blasting cabin - Retractable rotary table - Foot switch - Suction unit - Stairs