Temperature controller

Shimaden SR71-8Y1-1C

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: 06007153/001, total height: 6,050 mm, total width: 3,380 mm, total length: 3,074 mm, load capacity per storage section: 210 kg, construction height: 6,050 mm, input voltage: 400 V, Automated Warehouse Optimization Storage System KARDEX Shuttle XP500 System Type: SHUTTLE-XP-500-3050x864 Dcodpfx Aexq Tbteilsn Control: C2000, with B/W OP2000 display Serial Number: 06007153/001 Year of manufacture: 2006 Total load capacity: 2 x 33,550 kg Load per tray: Medium: 205 kg (evenly distributed) Tray dimensions: 3050 x 864 mm Number of trays: 36 units (more or heavier trays available upon request) Shuttle dimensions (W x D x H): 3380 x 3074 x 6050 mm (Height adjustable to available space) Power supply: 3/N/PE400 V, 11 A, 50/60 Hz, 4.9 kVA This offer is valid as long as the system is unsold Technical details per Shuttle: - Maximum total capacity of the KARDEX Shuttle XP: 2 x 33,500 kg - Maximum tray capacity: 36 trays, Medium: 210 kg each, evenly distributed; more or heavier trays can be ordered. - Tray dimensions: 3050 x 864 mm - Machine dimensions (W x D x H): 3380 x 3074 x 6050 mm - System footprint approx.: 10.39 m² - Storage capacity with 36 trays: approx. 95 m², each tray approx. 2.64 m² - Electronic volume measuring system with 25 mm grid on the display - Access opening with sliding doors for protection of personnel and stored goods - C2000 Control System, with B/W OP2000 display - LED anti-glare lighting above access point - Toothed-belt drive for minimal noise - Toothed-belt drive for fastest order picking - Shelf spacing adjustable in 25 mm increments by configuring support profiles, ideal for high-density storage - Weight management system monitors the load per tray - Includes light pointer Price: On request only by e-mail Price: excluding VAT, including transport and installation Delivery time: from stock Machinehandel De Leeuw BV specializes in used paternoster systems from brands such as Kardex, Hanel / Haenel, Electrolux, Bertello, Megamat, Lista, Denocard, and automated storage systems such as the Kardex Shuttle XP and XPlus systems. Machinehandel De Leeuw BV Oordeelsestraat 7-B 5111 PA Baarle-Nassau The Netherlands

Condition: ready for operation (used), Year of construction: 2008, - USED - 5-AXIS BRIDGE-TYPE VERTICAL MACHINING CENTRE     X-AXIS TRAVEL: 1750 mm Y-AXIS TRAVEL: 1400 mm Z-AXIS TRAVEL: 600 mm RAPID FEEDS X-Y-Z: 35 m/min Dcedpfx Aijwl R Ddjlen SPINDLE: 18000 rpm; 18,5-25 kW; HSK A63 TABLE SIZE: 1000 x 1200 mm MAX ADMITTED LOAD: 5000 Kg TOOL MAGAZINE: A CATENA ; 30 POS HEAD: A/B AXIS AUTOMATIC CONTROL UNIT: HEIDENHAIN iTNC 530 WEIGHT: 18000 Kg OVERALL DIMENSIONS: 6000 x 4000 x 3850 mm ACCESSORIES: SWARF CONVEYOR ; PORTABLE HANDWHEEL ; LASER TOOL SETTER

Condition: used, Year of construction: 1991, pressing force: 650 t, pressure:650 t passage width:920 mm stroke:1750 mm weight of the machine ca.:ca. 47 t Table area:2000 x 1500 mm ram surface:2000 x 1500 mm Daylight Opening:2100 mm Hydraulic:203 bar closing speed:500 mm/min pressing speed:0,5 - 10,4 mm/sec opening speed:250 mm/sec Solve speed:0,5 - 66,4 mm/sec Dcsdpfjfhmuvsx Ailjn Return Capacity:150 t total power requirement:75 kW Measurements (approx.):4,4 x 2,5 x 7,5 m

Condition: excellent (used), Year of construction: 2000, x-travel 2500 mm y-travel 800 mm z-travel 750 mm Control HEIDENHAIN TNC430i table dimension - longitudinal 3220 mm table dimension - cross 800 mm tool taper ISO SK40 spindle turning speed range 15000 U/min connected load 25 kVA tool change unit 40 Pos. weight of the machine ca. 20 t dimensions of the machine ca. 6,5 x 3,8 x 3,7 m This HEDELIUS BC80 is in good condition and can be viewed under power by arrangement with the seller. Description: Designation: Hedelius BC80 Type: 4-axis machining centre Control: Heidenhain TNC430i Year of manufacture: 2000 Djdpexa Hl Djfx Ailocn Travel distance X: 2500 mm Travel distance Y: 800 mm Travel distance Z: 750 mm Table clamping surface: 3220 x 800 mm Tool holder: SK40 Tool changer: 40-fold Spindle power: 10 kW S1 / 15 kW S6 Spindle speed: 50 to 15,000 rpm Total connected load: 25 kVA Special equipment: - Partition wall for pendulum machining - Internal coolant supply - 4th axis Hoffmann with counter bearing, hydraulically clamped - Belt filter - Scraper belt chip conveyor - Flushing guns - Renishaw TS27R tool measuring system - Renishaw infrared workpiece measuring system - Ethernet connection - Hand-held control module Other: - Ball screw drive in X and Y replaced in 2018 - Complete documentation available Machine weight: Approx. 20 t Space requirement: 6.5 (width) x 3.8 (depth) x 3.7 m (height)

Condition: used, Year of construction: 2004, operating hours: 11,022 h, functionality: fully functional, machine/vehicle number: 07520000211, turning length: 1,070 mm, turning diameter over cross slide: 400 mm, turning diameter: 560 mm, spindle motor power: 37 W, spindle speed (max.): 4,000 rpm, spindle bore: 79 mm, travel distance X-axis: 485 mm, travel distance Y-axis: 160 mm, rotational speed (max.): 12,000 rpm, Equipment: rotational speed infinitely variable, Gildemeister GMX 200 Linear with tailstock and steady rest for sale. Included are a coolant treatment system and a quality selection of tools HSK 63 - A, approximately 40 tools. Also included is a Berg chuck, see photos. The machine is being sold due to lack of orders. 49,700 power-on hours, 11,022 spindle hours. The machine can be inspected and tested at any time. Loading is possible without any issues. Dsdpjug Uc Nofx Ailecn

Condition: ready for operation (used), Year of construction: 2010, Max. workpiece diameter: 25mm, max. workpiece length: 100mm, max. bar diameter: 25mm, max. stroke X/Z: 42mm/50mm, rapid traverse: 40m/min, number of spindles: 6, speed: 12000rpm, control: Siemens 840D Powerline. Dcjdstqfq Uopfx Ailjn

Year of construction: 2006, condition: used, Injection molding unit, Krauss Maffei Dedpfx Aiedl Sf Solecn Size 700 Complete with screw cylinder, 50 mm diameter, and all valves and servomotor.

Year of construction: 2003, condition: ready for operation (used), Travel X/Y/Z: 2500mm/1000mm/770mm, table dimensions X/Y: 3200mm/1000mm, spindle speed: 8000rpm, tool positions: 40, tool holder: SK40, max. workpiece weight: 3000kg, feed rate: 30m/min, coolant pressure: 20bar. Machine dimensions X/Y/Z: approx. 6500mm/4500mm/3700mm, weight: approx. 21000kg, control: Heidenhain iTNC 530, control hours: 67334h, machine hours: 56616h, operating hours: 15872h. Including internal coolant supply, 3D measuring and infrared probe, chip conveyor and linear measuring system. Documentation available. An on-site inspection is possible. Dedpfx Aey E S Drjilocn

Condition: ready for operation (used), Year of construction: 2018, table load: 227 kg, number of axes: 5, This 5-axis HAAS TR-310 was manufactured in 2018. It features a table diameter of 310 mm, a maximum part swing of 787 mm, and can handle loads up to 227 kg. With a maximum rotation speed of 50°/sec and travel range of ±120°, it's ideal for complex machining tasks. If you are looking to get high-quality milling capabilities, consider the HAAS TR-310 machine we have for sale. Contact us for more information about this machine. • Condition: Brand new, never used • Table diameter: 310 mm • Max part swing: 787 mm • Standard T-slots: 6 @ 60° • Max rotation speed: 50°/secB Axis (Tilting) • Backlash: 30 arc-sec • Ratio: 3:1 • Max speed: 50°/sec • Max runout: 0.025 mm • Travel range: ±120° • Resolution: 0.001°A Axis (Rotary) • Accuracy: ±15 arc-sec Dcedpfxsx D I H Re Ailsn • Repeatability: 10 arc-sec • Max rotation: 999.999° (with rotary control) • Resolution: 0.001°

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : HSK40 - Spindle power : 32,5 [kW] - Spindle speeds : 40.000 [rpm] - Number of spindle hours : 1.211 [h] LINEAR AXES - Travels on X/Y/Z axes : 420 / 320 / 320 [mm] - Cutting feed rates (X/Y/Z) : 60.000 [mm/min] A ROTARY AXIS - Travel : 360 [°] - Indexing precision : 0,001 [°] - Cutting feed rate : 200 [rpm] B ROTARY AXIS - Travel : 100 [°] (+/-) - Indexing precision : 0,001 [°] - Cutting feed rate : 200 [rpm] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 60 - Tool exchange time : 5 [sec] TABLE - Table dimensions : Ø 250 [mm] - Maximum weight upon table : 20 [kg] - Distance table / spindle nose (min./max.) : 40 / 360 [mm] POWER SUPPLY Dcsdjuhbuuepfx Ailsn - Supply voltage : 400 [V] - Total installed power : 35 [kW] WEIGHT & DIMENSIONS - Machine floor space : 2.050 x 2.555 [mm] - Machine height : 2.520 [mm] - Machine weight : 5.000 [kg] MACHINE HOURS - Number of hours under power : 4873 [h] EQUIPMENT - CNC : Heidenhain iTNC530 - Electronic handwheel - Linear scales - 3 colors status lamp - Coolant tank * With washing gun - Chips conveyor - Oil mist extractor : FILTERMIST FX5002 - Spindle cooling unit - Electrical cabinet air conditioning - Tool probe : Renishaw - Workpiece probe : Renishaw - Tool-holders : 60 - Tool preparation bench