Edge banding machine

SCM Olimpic S 2000

Condition: ready for operation (used), Year of construction: 2018, 3-axis machining center Brand: HAAS Type: VF3 Year: 2018 CN: HAAS Tjdpsvlk R Eefx Af Tjf Equipped with: 30+1 position tool changer Chip evacuation screw 20 bar center coolant 10,000 rpm spindle Specifications: Table surface 1219 x 457 mm X-axis travel 1016 mm Y-axis travel 508 mm Z-axis travel 635 mm Max. load. on table 1588 kg Spindle speed 1 - 10,000 rpm Spindle power 22.4 KW Spindle taper ISO 40 Rapid feed 25 m/min Machine dimensions approx. 2997 x 2794 x H 3048 mm Weight approx. 5600 kg

Condition: good (used), machine/vehicle number: 2852, Year of construction: 2006, load capacity: 8,000 kg, lifting height: 5,000 mm, mast type: duplex, fork carriage width: 150 mm, fork length: 1,600 mm, total length: 4,120 mm, total width: 2,220 mm, additional equipment features: Dual tread, Weight system, Fire extinguisher, Equipment: lighting, TCM FD80 from Uniktruck Tsdsrk Rd Nspfx Af Tjf

Condition: excellent (used), ROLLER COATER (REVERSE) Max working width mm 1300 Tjdpfx Afeidqwpj Tjf Length of the machine mm 1600 approx Built-in Electric and command cabinet Feeding system by motorized rollers (power KW 0.75) Feeding speed adjustable (from 6 to 24 m / min) Total installed power KW 4.1 No. 2 working heads: * 1st head (with 2 rollers) Chromium plated Dosing roller diam. mm 174 + Rubbered Spreading roller diam. mm 248, with 2 adjustable speed variators (power KW 0.37 + KW 0.75), with also a counter-placed (bottom side) reference rubbered roller * 2nd head (with 2 rollers) Chromium plated Dosing roller diam. mm 174 + Rubbered Spreading roller diam. mm 248, with 2 adjustable speed variators (power KW 0.37 + KW 0.75), with also a counter-placed (bottom side) reference rubbered roller

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 - 3 Edges thickness in stips / lippings (min/max) mm 3 - 12 Panels thickness (min/max) mm 8 - 60 Tjdpfx Aed Nuu Hsf Tsf Numerical Control ICOS open TS Feeding speed (adjustable) m/min 4 - 20 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) Pre-milling Unit (vertical joint trimmers) 08.376 (2 x Kw 3) Glueing Unit (Hot Melt Glue) 283.1513 Band Pressure zone Edge coils supporting unit (reels N°) 1 Snipping (end-cutting) unit 08.415 (2 x Kw 0,66) Fine Trimming unit 08.055 (2 x Kw 1) 0°-30° Multi Function Unit (Profile contour Trimming unit) 08.342 (2 x Kw 0,66) servo Profile edge scraping unit 08.519 Glue scraping unit 08.50 Buffing unit 08.612 (2 x Kw 0,25) Free space

Condition: like new (used), Year of construction: 2020, functionality: fully functional, height adjustment type: mechanical, input voltage: 400 V, space requirement height: 1,200 mm, Edgebander equipped with: calibrators, edging material magazine, interchangeable hotmelt glue pot for EVA or PUR, flush trimming, rounding trimming units. Tsdpfx Afjwy Ugxe Tjf

Condition: excellent (used), Kemper Eco 50 Spiral Mixer For further information please send an message Tjdpfxokzkrhs Af Tjf

Condition: new, Year of construction: 2025, power: 1.5 kW (2.04 HP), Entry-level sheet fiber laser metal cutting machine Lower laser cutting cost and easy operation The modular cutting machine table with stiffeners saves time for disassambly and improves convenience and rigidity. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. Tedpfxehvu Hys Af Tsf Applicable Material: metal Condition: New Laser Type: Fiber Laser Cutting Area: 3000*1500mm Cutting Speed: 0-40000mm/min Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT Cutting Thickness: 0-30mm CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: new, Year of construction: 2025, Robland products are built by Werkhuizen Landuyt, located at Bruges, Belgium. BM 3000: • Saw aggregate for slot making. Max depth 10 mm • Left 5 mm bit for drilling • 20mm bit for minifix-system • 8 mm spindle for drill and limited milling applications • 35 mm bit for hinges • The thickness of the panels to be processed should be between 12 and 40 mm • The machine is equipped with a drilling head with 4 chucks and an integrated sawblade • Y axis reach/stroke: Drilling: 900 mm Grooving: 860 mm Tjded Hz Nijpfx Af Tjf Technical data: • Y axis reach/stroke • Drilling: 920 mm • Grooving with sawblade: 860 mm • axis is supported 3000 mm • Z axis plate thickness from 12 mm up to 40 mm • A axis 360° • Movement speed: 20m/min • Min. dimensions workpiece (X) 300x (Y) x 120 x (Z) 12 mm • the machine is equipped with a bore head with 4 chucks and integrated sawblade. • Max/min diameter bore heads 3 mm – 35 mm • Saw blade operates in the X-axis • Max. Depth saw blade grooving: 10 mm • Motor 1 HP 3*380 V / 3*220 V • Minimal required dust extractor capacity 2300 m³/h

Condition: excellent (used), Year of construction: 2022, Specification: Vertical Drill Block with 13 Spindles Horizontal drill block with 4 spindles in the X Horizontal drill block with 2 spindles in the Y Grooving Saw D=100mm Plausibility check 10kw tool change spindle 4 position tool changer Todpfx Aswtpu Dof Tsf Workpiece length max 200-3050mm Workpiece width 70-850mm Workpiece thickness 8-56mm Powertouch screen Woodwop for machine CNC 3D Simulation for the machine Energy Saving Mode

Condition: used, Year of construction: 2002, Machine length: 6240 mm Weight: 2400 kg Power consumption: 14 kW Extraction diameter: 120 / 140 mm Tedsvvkfwjpfx Af Tof Storage location: Nattheim