Compressor

SCHNEIDER AM-B-11-10-500 XBDK

Year of construction: 1990, condition: good (used), CNC-4th axis NIKKEN type: CNC-200 year 1990 with counterholder and base plate. Dwjdpfx Abegabu Uo Tef

Condition: new, Year of construction: 2024, Saw Saw blade rotation speed 3000 / 4000 / 5000 RPM Diameter saw blade and bore 300 – 400 mm, 30 mm Sawblade tilting 90° – 45° Cutting depth at 90° / 45° 125 mm / 90 mm Cutting width parallel fence, version Z400 M, Z400 EL 1350 mm (option 1000 / 1525 mm) Cutting width parallel fence, version Z400 X1, Z400 X3 1250 (option 1500 mm) Cutting length 3500 mm (option 2500 mm / 4100 mm) Dimensions cast iron table 985 mm x 710 mm Dimensions sliding table 3200 (option 2200 mm / 3800) mm x 420 mm Dimensions cross-cut table 1420 mm x 650 mm Length of swiveling cross-cut fence 2295 mm (telescopic 3000 mm) Scoring unit Diameter scoring blade and bore 120 mm, 20 mm Cutting depth with 120 mm diameter blade 3,5 mm Scoring blade rotation speed 8200 RPM Dwjdpfsglfv Sjx Ab Tef Scoring saw motor power 1,3 kW / 2 hp (S6) Weight 850 kg (Z400 – 3200) – 1080 kg (Z400 X3 – 3800) Voltage 400 V 3 phase (option 230 V 3 phase) Motor power (3 phase) 7 kW /9,5 hp (S6), option 9,2 kW / 14 hp (S6)

Condition: used, Year of construction: 1998, x-travel 6000 mm y-travel 4000 mm z-travel 1250 mm w-axis 1500 mm Control Fidia max. workpiece weight 60000 kg Control unit for tool magazine/tool changer Siemens turning speeds 6,3 - 4000 U/min surface area 2500 x 4500 mm 48 St. tool taper SK50 daylight between the side columns 3700 mm rapid traverse 30000 m/min total power requirement 63 kW weight of the machine ca. 150 t required space 16,8 x 10,3 x 7,9 m Dwjdpju I E Emjfx Ab Tef

Condition: good (used), Year of construction: 2008, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, working range: 2,500 mm, Equipment: cooling unit, TRUMPF TruLaser 2525 - 4 kw (formerly Trumatic L 2530) Working area: 2,500 x 1,250 x 115 mm Control: Siemens Sinumerik 840 D Laser power: 4,000 watts Max. Sheet thickness mild steel: 20 mm Max. Sheet thickness stainless steel: 15 mm Max. Sheet thickness aluminum: 10 mm STANDARD EQUIPMENT: - Closed machine frame with integrated laser unit - TFT color screen - Position laser diode - Motion unit for high-precision processing - Additional highly dynamic Yp axis - Drives with maintenance-free three-phase servomotors - Closed beam guidance Dwedpfsrwlwnsx Ab Tsf - Conveyor for small parts and waste - NitroLine - FlyLine - Piercing end detection TRUMPF LASER: - CO2 laser TruFlow 3200 - High frequency excitation - Maintenance-friendly turbo radial blower - Gas mixer (integrated) - Laser power control - Laser logbook function CUTTING HEAD: - Laser cutting head with 5" lens - Laser cutting head with 7.5" lens - Universal quick-change device - ControlLine CONTROL: - SIEMENS Sinumerik 840D control system - Automatic switch-off - ContourLine - SprintLine - Teleservice - Microweld - RJ45 network connection - 3.5" floppy disk drive - Network connection via telediagnosis SAFETY: - CE marking - Light barriers - Multi-chamber extraction system - Compact dust extraction system - Workshop programming EXTENDED EQUIPMENT: - More powerful TruFlow 4000 laser - Automatic pallet changer

Condition: ready for operation (used), chuck outer diameter: 6,000 mm, controller model: Siemens/Heidenhain, empty load weight: 220,000 kg, Type: SD 600/6500 4 assen gerichte, kogelomloopspindels tussen kolommen: 6500 mm maximaal hoogte onder dwarsbalk: 4270 mm verticale beweging van de dwarsbalk: 2500 mm maximaal gewicht op tafel: 160 ton koppel van de tafel: 30.000 MKP, 200 PK Verticale beweging van Z1 Z2: 1750 mm Twee onafhankelijke schaarliften aan elke kant van de draaibank, met bedieningseenheid Dwodpfewaiuqjx Ab Tjf Max turningdia -- passage: 6500 mm Power on the spindle: 200 HP Max hight of workpiece Z-axis: 4270 mm Number of speeds: 1 > 40 rev/min Long: 20 500 mm Wide: 8500 mm Height: 6290 mm (above ground-level)

Condition: new, Variable-speed ISO 40, Motorized cross table on all axes. 3-axis viewer included. Base with chip tank. Refrigeration system. Led lamp. Mechanical speed indicator. Variable speed motorized axes with rapids. Rail lubrication system with manual pump. Milling capacity with insert cutter : mm 100. Milling capacity : mm 35. Drilling capacity on cast iron with pre-hole : mm 60. Max drilling capacity on steel with pre-hole (s235jr) : mm 24. Spindle taper : Dwodpfx Aeh Im H Ssb Tjf ISO40 DIN2080. Spindle sleeve : mm 86. Spindle stroke : 120 mm. Head inclination : +/- 45°. Vertical head rotation : +/- 90°. Head body rotation : +/- 180°. Vertical spindle speed : (2) 60 ÷ 500 |500 ÷ 3600 rpm. Motor : 400 V 50 Hz 2.25 kW. Distance between machine nose and table : 45 - 395 mm. Spindle-column axis distance : 215-450 mm. Table size : 1246 x 230 mm. Longitudinal table displacement : 850 mm. Transverse table displacement : 310 mm. Maximum load capacity : 400 kg. Dimensions : 1680 x 1500 x 2100 h mm. Net weight : 1000 kg.

Condition: good (used), functionality: fully functional, Year of construction: 2006, laser power: 4,000 W, AVAILABLE AT SHORT NOTICE: TRUMPF Trumatic L 3030 - 4 kw - Year 2006 TECHNICAL DATA: Make: TRUMPF Type: L 3030 - 4 kw Year of manufacture: 2006 Working area: 3,000 x 1,500 x 115 mm Control: Siemens Sinumerik 840 D Laser power: 4,000 watts Max. Sheet thickness mild steel: 20 mm Max. Sheet thickness stainless steel: 15 mm Max. Sheet thickness aluminum: 10 mm Operating hours: NC Machine regularly serviced by TRUMPF! Transmitter tube: new 2024 TASC laser control: new 2022 Driver stage: replaced 2018 Magnetic bearing electronics: new 2016 STANDARD EQUIPMENT: - Closed machine frame with integrated laser unit Laser unit: TLF 2000 high-frequency excited CO2 laser, maintenance-free turboradial blower, mirror telescope, cooling unit, logbook function - Automatic pallet changer - Longitudinal conveyor belt for small parts/waste - Drives: maintenance-free three-phase servomotors - Cutting head quick-change device - Laser cutting head with 5" lens and laser cutting head with 7.5" lens - Programmable cutting gas pressure setting - APC capacitive height control and process control - AutoLas Plus automatic focus position adjustment - Laser power control - Position laser diode - HI-LAS high-pressure cutting - Fast processing with SprintLas - ContourLas for the production of small holes - PMS plasma sensor technology - Automatic sheet edge detection Dwsdpjuthz Tsfx Ab Tof - Programmable power cycles - Microweld - Automatic switch-off - Work area lighting - Sinumerik 840D control system: open control system on PC basis, simple operation, online help, integrated e-shop, diagnostic functions, maintenance logbook, technology data, teleservice - Workshop programming ToPs 100 lite - Safety: multi-beam light barriers, beam guidance fully encapsulated and ventilated, monitoring system, multi-chamber extraction and compact dust extractor, protective cabin - 3.5" floppy disk drive - TFT color screen - Electrical equipment: Voltage 400 V / 50 Hz - Paint finish: Standard RAL 9002/5010 EXTENDED EQUIPMENT: - TLF 4000 laser incl. lens monitoring sensors - PCS Process Control System

Condition: used, Year of construction: 2007, Swing over bed 923,8 mm Swing over cross slide 755 mm max. turning diameter 356 mm Max. Turning length 515 mm control MSX-850 III travel -x axis 260 mm travel -y axis -50, +50 mm travel -z axis 590 mm travel - z axis (spindle 2) 624 mm driven tools turning speeds 6.000 U/min CNC Turning- and Milling Center | MORI SEIKI - NL1500SY / 500 equipped with Dwsdpfx Ajvwgkrob Tsf main/counter spindle, b- + y- axis, a turret for driven tools and chip conveyor and loading and unloading system (alphaMAX). The machine has only 3.400h processing time hours. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: NL1500SY500 | NL 1500 SY / 500 | NL-1500SY / 500 | NL-1500 SY / 500

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 1 h, new KAESER SXC8 screw compressor system (10 bar) available immediately with integrated refrigeration dryer with 215 liter compressed air tank with electrically level-controlled condensate drain with Sigma Control 2 control Year of construction: 2022 Operating hours: 1.5 operating hours Technical data: Volume flow at 10 bar: 0.67 m³ / min Nominal power drive motor: 5.5 kW Electrical supply: 400 V / 3 ph / 50 Hz Dimensions W x D x H in mm: 620 x 980 x 1480 Weight: 260 kg Compressed air tank: 215 liters Compressed air connection: G 3/4 " Dwedpfx Aehhiw Nsb Tef Sound pressure level: 69 dB (A) Refrigeration dryer pressure dew point: 6 ° C Visit our store. We always have a large selection of new and used compressors in stock! Available immediately.

Condition: used, Year of construction: 2007, swing diameter 640 mm max. turning passage 640 mm control Simens 840 D Powerline - - - - - Main spindle - - - - - - - - - - - bar material dia. 65 mm chuck diameter 200 - 315 mm spindle bore diameter 80 mm diam. of main spindle in forward position 120 mm --- Subspindle --- - - - - - - bar material dia. 65 mm chuck diameter 315 mm spindle bore diameter 80 mm forward bearing diameter 120 mm - - - - - General data - - - - - - - - - - - spindle distance 1.500 mm turning length 1.185 mm Main-/Counter -spindle turning speeds 5.000 U/min Dwedpfx Abevx U A Sj Tef driven tools turning speeds 12.000 U/min Slide cross X1, Y1: 550 / 180 mm Slide cross Z1: 1.185 mm Slide cross B1: 240 ° Slide cross X2: 180 mm Slide cross Z2: 1.050 mm Slide cross Z3: 1.150 mm CNC Turning- and Milling Center | DMG GILDEMEISTER - GMX 250 linear equipped with main/counter spindle, chip conveyor, tool changer, a turret for driven tools and and a portal loading system (Pneumotec Portalsystem S-01623a). The machine has only approx. 32.000h operation hours. The machine is in a well-maintained condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: GMX250linear | GMX-250 linear | GMX 250linear | GMX-250linear