Impregnating and Coating machine

Schiele Impregmat EVO

Condition: new, Year of construction: 2026, Kündig Perfect-2 1350 RED-L Wide Belt Sander incl. Intermediate Lacquer Sanding Configuration Special price for exhibition machine - showroom model - - Robust, space-saving wide belt sander for the highest standards - Constant working height due to upper part adjustment - Working width: 1350 mm - Overhead sanding, with 2 sanding units - Serrated rubber contact roller in proven hardness - Infinitely variable height adjustment of the contact roller according to grit scale - Electric lifting/lowering of the contact roller depending on unit selection - Electronically controlled segmented sanding pad - Entire sanding pad unit tiltable by 10° - Parallel spring-loaded, ground steel pressure roller at the infeed - Rubberized pressure roller between the sanding units and at the outfeed - 2 motors: 18.5 kW and 11 kW, 400 Volt, 50 Hz - Motorized precision height adjustment with digital readout - Belt tension, control, and oscillation pneumatically operated Compressed air consumption approx. 2 l/min - Optimum safety thanks to automatic instant stop with disc brake in case of belt breakage, etc. - Workpiece feed 2.2 kW with conveyor belt and drive roller - Vacuum system for the entire working table with additional perforation of 200 mm for smaller workpieces - Automatic thickness setting across the entire working width - Workpiece over-thickness protection with instant feed stop and lift-off automation - Stepless adjustment of material removal - Electronic feed control on operator panel, infinitely variable 3 - 15 m/min - PLC control with teach-in memory - Pneumatic conveyor belt control - Workpiece support with rollers at infeed and outfeed - Enormatic: fully automated quick setup and feed activation - Eco energy saving mode - Error diagnostics - Pass-through height 210 mm up to 18.5 kW - Sanding belt size 1350 x 2000 mm Perfect - Features: High-quality swiveling Plexiglas control panel - 10'' touch screen - Industrial control system - Automatic pressure regulation and storage of sanding pad elements - Electronic compensation for sanding belt grit size - Job and operating hours counter Lacquer Equipment: - Infinitely variable sanding belt speed on 2nd unit - Cleaning nozzles for the sanding belt of the 2nd unit, controlled by use - Electronic sanding pad with 22 mm segment width - Additional sanding pad insert Iiedpfxjk Dpp Ss Akxja Additional options included with this machine: Fold-down outfeed table extension (without panel) C10) LED package ASB5+AS3) ECS workpiece air blow-off with fan Location: 54634 Bitburg - Immediately available -

Year of construction: 1999, condition: good (used), Built in: 1999 Capacity (A4 stacks packaged): max 20 - 24 Pakete/min Capacity ( A4 stacks loose): max 16 - 20 Pakete/min Iiodpfodym Srsx Akxea Pallet height (incl. pallet): max 1.600 mm Pallet size : max 1.200 - 1.200 mm Size: max 420 x 307 x 320 mm Size: 148 x 110 x 50 mm Equipment: • infeed and buffer section • turntable • infeed table • automatic palletizer • roller track for full pallets • intermediate cardboard slip sheet hopper • pallet dispenser

Condition: new, Year of construction: 2026, A550 Fully Automatic Solid Wood Saw 9 m Fully automatic cutting of medium-large wood with simple-to-use automation. Put down any wood and the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Your fully automatic saw can optionally come as an inline optimiser saw. For every piece of wood you place down to cut, no matter what length, a laser sensor will measure its length. Our powerful optimisation algorhithm then takes your cut list and calculates the best order of parts to cut from this wood so that wastage is minimised. All of this happens on-the-fly, during the machine operation process, and without needing any input from you. • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Bundled / multi-bar cutting and counting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Fully adjustable saw cutting and wood feeding rates for maximum process productivity. • Automatic labels printing for parts using data from the job list (manual label application, optional). • Inline direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). • Automated servo positioning of the saw mitre angle up to ±75° (optional). Highly suitable for: • Frame and truss manufacture • Sheds manufacture • Furniture manufacture • Mitre timber structures manufacture • Bulk wood cutting Iisdpfx Asf Ekngekxja Model: A550 Length: 9 m Material Length: 8580 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Condition: repair required (used), functionality: not functional, Finger-jointing line Dimter HK 400 for only fifteen thousand seven hundred EUR. Finger-jointing plant for timber packages. Wood input lengths: 800 - 6000 mm. Milling height: 285 mm (optionally 300 mm). Colour: blue. Requires repair, sold as-is in its current condition. The plant has already been disassembled and is stored at the warehouse in Achern. Lots of material for little money. All technical documentation available. We will also provide you with technical support and answer all your questions. Iodpfsvi Hw Nox Akxjia

Condition: good (used), functionality: fully functional, High-frequency press for glulam beams up to 22 meters maximum pressing width: 1300 mm maximum pressing thickness: 300 mm loading conveyor 3,000 mm press with section-by-section polymerization (3 meters each) Iijdpfjw A Hk Iox Akxea

Condition: new, Year of construction: 2024, functionality: fully functional, Palette board stacking machine Tech characteristics: 1. Dimensions of the processed material (mm) • length - 800-1400 • width - 60-200 • thickness - 14-50 2. Maximum package dimensions (m) • length - 1.4 • width 1.2 • height - 1.3 3. Material feed speed (m/min.) - 50 4. Packing speed (layers per minute) 5. Pneumatics • Compressed air pressure (bar) - 5-6 • Compressed air consumption (l/min.) 30-40 6. Service staff (number of people) - 1 7. Total installed power, kW - 8.2 Iiodper E Abvsfx Akxja

Condition: used, Year of construction: 1995, machine/vehicle number: 6017, functionality: limited functionality, stroke length: 600 mm, total length: 13,500 mm, total height: 2,090 mm, operating pressure: 250 bar, Price on request. For sale: 3 double-sided, hydraulic vertical solid wood presses from Minda. We are offering three high-quality solid wood presses manufactured by Minda for sale. The presses can be purchased and operated individually or as a complete package. Technical Specifications: - Design: Double-sided, hydraulic vertical press Iijdpfx Aswwgz Ajkxja - Number of press chambers per unit: 2 - Application: Pressing lamella packages into beams or glulam according to DIN 1052 - Pressure monitoring: Automatic - Pressure shoe clearance: 800 mm Special feature: The press force of the first pressure shoe can be individually adjusted – ideal for the production of glulam beams of various lengths. The machines are in good condition. Availability: Immediately Sale: Individual units or as a complete package Location: Allendorf Technical Data: - Max. pressing length: 13,500 mm - Max. lamella width: 320 mm (chamber width 395 mm) - Min. lamella width: 85 mm - Chamber height: approx. 2,090 mm (clear opening) - Pressing height: max. 2,000 mm / min. 1,550 mm - Specific press force: 1–12 kp/cm² - Vertical cylinder stroke: max. 600 mm - Horizontal pressing force per side pressure unit: approx. 8 Mp - Horizontal cylinder stroke: max. 312 mm - Infeed height of roller conveyor: approx. 920 mm - Feed rate: 15 m/min - Vertical pressure point spacing: 400 mm - Horizontal pressure point spacing: 800 mm (1,600 mm) Operating pressure: (Fill pressure) min. 50 bar (Pressing pressure) max. 250 bar

Year of construction: 1999, condition: ready for operation (used), Built in: 1999 Size: 500 x 500 mm min 100 x 140 mm Pallet height: max 1550 mm Packet height: max 300 mm Iiedpfx Ajdymn Tjkxsa Pallet size: 1000 x 1200 mm Speed: max 1200 Ex./h

Condition: used, Year of construction: 2004, functionality: fully functional, type of input current: three-phase, cutting width (max.): 400 mm, saw blade diameter: 800 mm, rotational speed (max.): 800 rpm, total length: 13,500 mm, total width: 5,400 mm, total height: 2,500 mm, cutting length (max.): 6,000 mm, DePauw QCUWSCNC18 Double Cut Cross Saw, manufactured in 2004. Fully functional and well maintained, suitable for immediate use in production. Cutting width: 400 mm Cutting length: 6,000 mm Total machine dimensions: 13,500 mm (length) × 5,400 mm (width) × 2,500 mm (height) Rear saw blades: 800 mm diameter, maximum speed 1,500 rpm Front saw blades: 500 mm diameter, maximum speed 3,000 rpm Saw type: Double Cut Cross Saws Condition: Used, fully operational. Location: Cork, Ireland Delivery available at buyer’s expense. Price: €25,000 Iiodpfx Asw Nbhmokxja Contact for more details or to arrange a viewing.

Condition: new, Year of construction: 2025, Sleeve packer / film band roller for PE film wrapping of large rolls. Incl. shrink tunnel. - Specifications sleeve machine: 220V, 6kW; max. product dimensions (mm): L1000xW230xH230; sealing blade length: 1500mm; machine dimensions (mm): L1790xW2340xH1985. - Specifications of shrink tunnel: 380V, 35kW; machine dimensions (mm): L2400xW1880xH1720. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Iiedpfx Aksv Nl Nqsxsa