Dosing system

Scheugenpflug

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: SNDE106744, input voltage: 400 V, input frequency: 50 Hz, Vacuum casting system was used to cast epoxy resin into plastic housings Ffedpfxjvnrz Do Aa Eew

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 158 h, arm reach: 1,300 mm, Hello, Fedpfxsp E T N Ae Aa Eofw we are selling a demonstration robot UR10e, was used for a concept study but was discarded.

Condition: used, functionality: fully functional, Scheugenpflug A310 K4750-X11 Material Preparation and Feeding unit. The all-round system A310 simultaneously prepares the dispensing material while loading it from the barrel. Temperature control also helps to optimise the viscosity of the dispensing medium. The applied vacuum evacuates air trapped in the material already during preparation. Degassed material is required for a bubble-free dispensing process. Circulating the dispensing material continuously prevents sedimentation of the contained filler materials and keeps the properties of the dispensing material components at a constant level. The stirring intensity is adjusted to the dispensing material being prepared. Used for l Materials: • One and two component • Liquid to medium viscous • Non-abrasive to highly abrasive • Non-filled to highly filled Technical Data: • W x H x D (1C-60 l) 700 x 1950 x 1000 mm W x H x D (2C-60/60 l) 700 x 1950 x 1400 mm Ffodpfx Aastp Df Hs Ejw • Weight: 240 kg (1C-60 l) 400 kg (2C-60/60 l) • Feeding volume: 250 ml/stroke • Power supply: 3~ 400 V, 50/60 Hz, CEE 16 A • Ejector evacuation power: 12 l/min (at 6 bar) • Vacuum pump evac. power: 242 - 283 l/min • Heating capacity: up to 80°C • Peripheral speed of agitation blade: 39 rpm • Tank heater power: (230 V) approx. 1000 W Good working condition. Please check out our other listings as well.

Year of construction: 2015, condition: excellent (used), The drum follower plate system A280 has the proven Scheugenpflug double-piston pump. This pump only comes into contact with material on one side, while a flushing liquid on the rear ensures that abrasive fillers do not get caught on the seals. With this system, highly abrasive, pasty media can be conveyed continuously and reliably with an unrivaled service life. Ffodpfjif Ug Eex Aa Ejw 2 Component Follower Plate System.

Condition: new, Please read the technical specifications in full. If you are considering this machine as an investment, we kindly request your complete credentials, including a correct telephone number and email address, in order to submit an offer. Fiber Laser 30W Ffedpfx Aaoru E Svj Eow Marking area: 200 x 200 mm Maximum workpiece size (WxHxD): 550 x 450 x 350 mm Laser type: Fiber 30 Watt Wavelength: 1064 nm Maximum marking speed: 7000 mm/sec Z-axis motorized H: 700 mm Repeatability/lens: +/- 0.001 mm Minimum line thickness: approx. 0.01 mm Power supply: 240 V / 50 Hz External dimensions: 110 x 80 x 200 cm Front door: manual Including software and PC Can be demonstrated under power on-site Price net, plus VAT

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 133106 & 133312, New material feeder, system Pailfeed PF803, year of manufacture 2024, unused, including control unit DS 503. Designed for reliable, clean, and bubble-free conveying of medium- to high-viscosity single-component materials from a container. Dispense module not included! Two units available. Please specify the desired quantity with your offer. Optional accessories such as UV-curing devices are offered separately. Supplier: Dr. Hönle AG. --- Please quote your price offer. Sale only within Europe (EU), including Turkey, Great Britain, and Switzerland. --- Technical specifications can be found in the handout. Supplied without packaging; all warranty rights are excluded. Should you wish to dismantle the system yourself, please note this in your offer. We do not assume any liability for the accuracy of the technical data, for the completeness of accessories and tool equipment, or for compliance with all safety and environmental protection requirements specified in accident prevention regulations. Ffedpfxjw Dd Rzs Aa Eow

Condition: as good as new (ex-display), functionality: fully functional, Gap filler dispensing system – Scheugenpflug LP804 + P300 + GP-1C – immediately available High-performance system for precise processing of thermal pastes, gap fillers or potting materials. Includes material prep unit with vacuum, dual-component metering head, and control logic. Used, fully functional and in very good condition. Fedpfx Aowdqvwoa Eofw

Condition: new, Year of construction: 2024, functionality: fully functional, Any shape or form may be cut, engraved, or 3D milled using this universal CNC router. The Wattsan M1 6090 can create décor, furniture, advertising, and packaging. This machine is compatible with several materials, including wood, MDF, chipboard, acrylic, plexiglass, PVC, composite, and aluminum. The working table of the Wattsan M1 6090 is 600x900x200 mm. A 2.2 kW spindle and a T-slot table are part of its basic design. Compared to the A1 6090 model, the processing depth may be increased by 20% in a single pass thanks to the 300 mm portal height. You can give our managers a call for additional details! Fedorvh Ebepfx Aa Ejfw Wattsan M1 6090 characteristics Working area: 600x900 mm Spindle: 2.2 kW Machine size: 1380 x 1500 x 1890 mm Weight: 400 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: as good as new (ex-display), System components: • Control unit Dos SCP210 • Material feeding unit A220 1C Fsdpfx Aowdtd Rja Ejfw • Dispensing head Dos GP-1C Complete adhesive application system designed for sealing covers or lids with single-component materials like Loctite. Features precise dispensing control, ergonomic material feed with vacuum follower plate, and clean, repeatable application.

Condition: excellent (used), Year of construction: 2007, operating hours: 1,100 h, machine/vehicle number: 30438, overall weight: 130 kg, load capacity: 6 kg, arm reach: 1,632 mm, pivoting range: 360 °, controller manufacturer: Fanuc, controller model: R30iA, teach pendant manufacturer: Fanuc, input current: 16 A, type of input current: three-phase, repeat accuracy: 0.08 mm, This robot has extremely few hours and is in very good condition. He didn't work as a welding robot, but instead fed pic and place metal plates of around 300 grams to a machine. The maintenance was carried out regularly by Fanuc. The machine has been thoroughly checked and has passed an endurance test. Ffodpfsi Dtnysx Aa Esw Welding software is installed. The robot can be inspected under voltage.