Balancing machine Schenck TBcomfort, year of manufacture: 2016

Schenck TBcomfort

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, workpiece weight (max.): 5 kg, total width: 360 mm, total length: 700 mm, Universal dynamic balancer for rotors from 10g - 5kg Djdpfx Aajuh Svpe Ejcd

Condition: excellent (used), Year of construction: 1986, Conventional lathe, make: VDF HEIDENREICH&HARBECK, model: 540 Hamburg, year 1986. In very good original condition with 3-axis digital readout Heidenhain POSITIP 880. Feed and rapid traverse on all 3 axes including the compound slide. Equipped with coolant system, swarf back panel, and machine documentation. 315 mm Forkardt chuck. Swing diameter: 540 mm. Turning length: 1500 mm. Spindle bore: 103 mm. Spindle speeds: 9–1800 rpm. Multifix C tool post. Fixed steady rest. Swarf protection cover. For further details, see the technical data sheet. Space requirement: length 3.8 m, width 2 m with back panel, height 2 m with back panel. Weight approx. 3500 kg. Dcodpfxex Hr Duo Aa Eod

Condition: new, PAK-1 Unbalance Measuring Unit is designed to modernize your balancing machine. A balancing machine has a long mechanical life, but prolonged use leads to gradual failure of electronics and measuring instruments, causing problems with spare parts and lack of technical support. Minimize downtime and ensure the reliability of your balancing machine by upgrading it with a new advanced measuring unit. The PAK-1 unbalance measuring unit works in all balancing machines of most existing designs and manufacturers. Confidence in results and ease of use: Easy to set up and work with, our devices do not require any special theoretical knowledge. Wide range of functions for your balancing machine: The use of modern microprocessor technology and many years of experience of our developers allows us to implement functions that were previously unavailable to other manufacturers. Your machine complies with ISO 21940: Balancing machines equipped with the PAK-1 unbalance measuring unit fully meet the precision requirements of modern standards. HIGHLIGHTS • We make balancing easier - the main advantage of our balancing systems. • The balancing process is displayed in real time and the unbalance behaviour of the rotor is monitored on the screen to achieve the best possible result. • The maximum sensitivity of the machine at any moment of operation, the set-up and calibration of the machine is carried out by the operator himself. • Free from the influence of external vibration factors on the measurement result, it has a high degree of protection against various types of interference. • Easy to learn working skills and maintenance for any employee. INCLUDES: 1) vibration sensor signal processing unit, 2) fanless industrial computer with touch screen, 3) new vibration and speed sensors, 4) metal protected cable set. SEQUENCE OF WORKS for modernization of the measuring unit - Replacement of the existing measuring system with the balancing complex PAK-1 based on an industrial computer; - Installation of new vibration sensors and rotor speed sensor - Replacement of all connecting cables; - Adjustment of the measuring unit on the balancing machine; - Training of personnel with skills to operate the machine. VTM GROUP offers to upgrade your balancing machine. We repair and modernise various old balancing machines of all types from all manufacturers. It's cost effective. An alternative to buying a new balancing machine in 95% of cases. Urgent. Work can be done at customer site within 1-2 days. New components for modernization of your machine: • Installation of new measuring system and vibration and speed sensors. • Installation of new electrical equipment Dcsdpfx Aaeq Ttn Ds Ejd • Manufacturing or repair of the rotation drive • Manufacturing of new rollers Every business is different. Let's discuss your task. We can offer a solution for any balancing machine. Please contact us to get the best offer! 👇

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 3,000 kg, Maximum Rotor Weight ---3000 kg (6613.87 lb) Minimum. Rotor Weight ---30 kg (66.14 lb) Maximum Rotor Diameter ---1400 mm (55.12 in) Minimum Shaft Diameter ---20 mm (0.79 in) Maximum Shaft Diameter ---300 mm (11.81 in) Motor power ---11 kW (14.75 HP) Drive Unit (Std.) ---11 kW (14.75 HP) Dodsr Dd Avspfx Aa Eocd Balancing Speed ---0-3000 Rpm (25 Hz) (up and down adjustable) Drive Unit --- Only Belt or Shaft / Belt + Shaft Bed length ---3000 mm (118.11 in)

Condition: used, functionality: fully functional, Used Schenck Balancing Machine H 50 V/B with used CAB 690 H measuring unit. Dsdpfx Aaox Ein Sj Eecd (Can be upgraded to a new CAB 920 unit for an additional (18 000–20 000€) The machine comes with original foundation drawings, documentation and manuals. The machine can be test run in Kerava. Rotor Capacity - Rotor weight range: 20 – 6 000 kg - Maximum symmetrical load on pedestal bearing: 7 500 kg - Maximum symmetrical load on stand bearing: 3 750 kg - The machine can be loaded freely with lower weights when following recommended procedures. - Maximum rotor length between pedestals:1 600 mm (belt drive) - Maximum diameter over machine base: 2 100 mm - Clamped rotor diameter ranges: 25–180 mm, 180–380 mm - Machine bed length: 3 500 mm - Balancing speed n depends on the rotor’s moment and must be selected to avoid overloading the drive. - Maximum permissible G·n² value: 1400 × 10⁶ kg/min² - Applies to a rigid symmetrical rotor mounted on pedestal bearings. - May be exceeded during dynamic tests on flexible rotors and strength tests. - End drive / FU motor: 7,5 kW - 4-speed gearbox: 120–2520 rpm - Belt drive BU 5 / FU: 7,5 kW - Unbalance Umar 0,5 gmm/kg: 0 gmm/plane

Condition: ready for operation (used), Lathe Fabr Takisava Type TAL 510 with lathe chuck + quick-change holder + center punch Dedpfxovyuuqo Aa Ejcd

Condition: refurbished (used), Year of construction: 2012, Offered is a vertical turning and grinding center EMAG VSC 250 DS. The machine will be mechanically overhauled and rebuilt by EMAG. Depending on requirements, the machine can be equipped with various automation options (shuttle, O-type conveyor, L-type conveyor, turn around station) and other peripherals such as chip conveyors, coolant systems, etc. Dcodsh Tkdqopfx Aa Eed CONTROL Siemens 840Dsl TECHNICAL DATA Workpiece diameter: 250 mm Workpiece height: 100 mm X-stroke: 860 mm Z-stroke: 200 mm MAIN SPINDLE power 28 kW TOOL CARRIER EMAG wheel turret, 12x VDI 40 console with grinding spindle 18 kW, 45000 1/min Delivery time and additional equipment of the machine on request.

Condition: used, Year of construction: 2007, table diameter 4520 mm table load 35000 kg swivelling range 110 Grad total power requirement 44 kW weight of the machine ca. / t required space / m Type: ROMAT 350 / LVEB-120000N-4m / VVEs-D-18000N-5m-S / QVEB-2m travelling beam / CR-200000N / Hydraulic scissor lift table In the scope of delivery: Item Designation 1 Welding power source GLC 603 Quinto SD 2 Wire drum 3 Service door 2.1 4 Robot control cabinet 5 Service door 1.2 6 Scissor lift table (shown in parking position) 7 Cross-travelling unit QVEB 8 ROMAT 350 robot 9 Service door 1.1 10 Safety fence 11 Platform 12 Positioner 13 Sliding door 1 14 Linear traversing unit LVEB 15 Vertical traversing unit VVEs 16 Sliding door 2 The disc ring on the table is a device that is not included in the scope of delivery ----- Technical data - Mechanical dimensions (without control unit and superstructures): approx.6440(57 7 0)x4520(2700)x5460(3320) LxWxH - Turntable diameter: 4520mm - Weight: approx. 25,000kg (without superstructure) - Speed range: 0.004 - 1.07 rpm - Welding current coupling: 600 A - Maximum table load capacity: 35 tons (according to load chart) Ambient temperature Storage / transport 0 to 60'C Operation +4 to 35 "C Interfaces Central transfer point for control, power supply, earth connection ----- 2.3 Linear traversing unit, LVEB Type LVEB-120000N 4m Dimensions W x D x H 7,700 x 2,440 x 776 mm Weight 4,355 kg Travelling distance 4,000 mm Load of the carriage 120,000 N Drive unit Gear motor Precision bevel gear motor Manufacturer Stöber Type K402VF0250EK703V Power 4.21 kW Voltage UKE 140 V / 1000 rpm Current Rated current IN: 8.32 A Type of current Standstill current I0: 9.04 A Motor speed 3,000 rpm Gear ratio i = 25.28 ----- 2.4 Vertical traversing unit, VVEs Type VVEs-5m Dimensions W x D x H 2,000 x 1,960 x 7,150 mm Weight 9,500 kg Travelling distance 5,000 mm Max. moving mass 18,000 N Drive unit Gear motor Bevel gear motor with brake Manufacturer Stöber Type K713VF0790MQ30ED704B Power 4.8 kW Motor speed 2,000 rpm Gear ratio i = 78.83 (20181/256) ----- 2.5 Cross-travelling unit, QVEB Type QVEB-2m Dimensions W x D x H 1,270 x 4,100 x 756 mm Weight 1,950 kg Travelling distance 2,000 mm Load on the travelling beam 10,000 N Max. moving mass 18,000 N Drive unit Gear motor Precision flat geared motor Manufacturer Stöber Dcjdpfx Ajrmulvea Ejd Type FS202VQ0145ED402U Power 1.43 kW Voltage UKE 140 V / 1000 rpm Rated current IN 2.86 A Type of current Standstill current I0: 3.1 A Motor speed 3,000 rpm Gear ratio i = 14.65 (3180/217) ----- 2.6 Rotary indexing table Type CR-200kN Manufacturer Cloos Dimensions W x D x H 1,820 x 2,120 x 541 mm Weight 2,850 kg Drive unit Gear motor Bevel gear motor Manufacturer Stöber Type K814VG1540EK803U Power 6.7 kW Motor speed 3,000 rpm Gear ratio i = 154.322 ----- 2.7 Robot ROMAT 350 Type ROMAT 350 Dimensions (W x D x H) in reference position 1,900 x 600 x 1,500 mm Weight 205 kg Footprint 500 x 515 mm N...

Condition: used, Year of construction: 2015, Technical details: turning diameter: 200 mm swing diameter: 260 mm turning height: 60 mm Djdpfx Aaeq Sc Huj Escd

Condition: used, power: 54 kW (73.42 HP), fuel type: diesel, fuel tank capacity: 146 l, color: gold, lifting height: 18,000 mm, Year of construction: 2023, operating hours: 1,990 h, Year of manufacture: 2023 Empty weight: 11.520 kg Carrying capacity: 4.000 kg GVW: 15.520 kg Dimensions (LxBxH): 626 x 232 x 270 cm Working height: 1.800 cm Dcedpfxoxq Rl Ae Aa Eod