Axle stand

SANDERS SLB 15 to. - 1200 mm verzinkt

Condition: used, Year of construction: 1992, Automatic PET bottle blowing machine Manufacturer: SIDEL Type: SBO 4 S1 Dcjdpfx Acewa Rhre Hok Year of prod. 1992 Capacity: 4,000 for 1.5 L / 2 L bottles Installed power: 150 kW Includes 1.5 L molds Preform feeder Technical condition: used machine, starts up, program is functional

Condition: new, Year of construction: 2025, machine/vehicle number: 381201764, Gasparin GI118CV OLIMPO Mobile jaw crusher on a tracked chassis The sheer power that the OLIMPO delivers thanks to its 1100x800 crusher is the ideal prerequisite for a specialized machine for professionals in quarries and recycling plants. This uncompromising machine was developed with a focus on meeting the requirements for operation, productivity, effortless maintenance, and transport. Equipped with state-of-the-art control and operating systems, it is easy and user-friendly while also being environmentally friendly. The HCS control system (Hydraulic Crushing System) actively supports the automatic operation of the machine, guaranteeing maximum profitability in terms of maintenance costs and productivity, making it unparalleled. The structural reinforcement between the frame and the crusher gives the machine the highest level of robustness against stresses. The special design of the supporting structure guarantees excellent access to all machine parts during maintenance operations. The OLIMPO crusher certainly delivers convincing and unparalleled performance both in natural stone applications, in recycling, and in rental operations. Production capacity: approx. 360 tons/hour Djdpfxjhd I U Ee Ac Hsck Patented HCS system Proportional valve with "Load Sensing" for optimizing the system and reducing fuel consumption by approx. 30%. Optional pre-screening Hydraulically adjustable crushing gap, even during the crushing process Fast locking system with wedges and tilting cylinders Discharge height 3200 mm Dust extraction system Tank pump Magnetic separator Warranty: 1 year or up to a maximum number of operating hours from the start of operation of the system Technical data: Jaw crusher 1100 x 800 mm Crushing gap from 50 to 200 mm Hopper 5 m³ - 2000 x 3970 mm, foldable for transport dimensions Two-deck vibrating screen 1020 x 2000 mm Main conveyor belt 1000 x 11000 mm 4-cylinder diesel engine with constant speed, 82 hp/60 kW, emission stage V Control panel Tracked chassis 450 x 3800 mm Weight: kg Transport length 13850 mm Transport width: 2550 mm Transport height 3390 mm Further information Intended use: Construction General condition: very good Technical condition: very good Optical condition: very good

Condition: ready for operation (used), A Honsel bag making machine (packaging machine) is available. Working width: 500mm, wrapping closure: one-sided. Including cardboard flange feeder. The machine is partially dismantled. Toothed belts must be tensioned and partially replaced. Toothed belt wheels are disassembled and must be installed. On-site inspection is possible. Dcedpfx Aevtqrlec Hjk

Condition: new, Year of construction: 2025, Multi-use, powerful, heavy and very massive segment folding bench - this is not a typical folding bench - much stronger and more robust. A segment folding bench is characterized by the full segmentation over the entire working length of 1.40M. The upper and lower segments can be removed quickly and easily, and the bending beam is divided into segments. The bending angle is from 0 to 155 degrees. Lock with the pedal, the hands are free and you can easily position the sheet metal - open and close with your foot. The folding beam is connected to 2 gas pressure dampers, so the control with the folding beam is incredibly easy. Practical tool box on segments at the rear of the machine. Technical specifications: - Max. Working width; 1400mm - bending angle max. 160 degrees - Max. Sheet metal thickness (steel) 1.5mm - weight 300 kg - segment jaws width 30,40,50,60,70 and 100mm - three cheeks are equipped with segment jaws (full segmentation) -Stop for preset bending angles -Gradscala Price: 5700 euros Dcjdpfx Acoc Swhyo Hsk wheels incl. We are looking forward to your contact!

Condition: used, Year of construction: 1987, functionality: fully functional, machine/vehicle number: D12L/8393, Offer Number: D12L/8393 Machinetype: wire nail press Make: WAFIOS Type: N41 Constr. year: 1987 Dcodoxnykpspfx Ac Hok diameter range: 1,8-3,4 mm nail length: 13-80 mm output - pieces/min: 550 Location: In our warehouse

Condition: new, Year of construction: 2025, total height: 4,000 mm, total length: 7,000 mm, total width: 3,000 mm, warranty duration: 24 months, temperature: 80 °C, air demand: 36,000 m³/h, input voltage: 380 V, heating capacity: 345 kW (469.07 HP), power: 40 kW (54.38 HP), fuel: liquid petroleum gas (LPG), energy consumption: 40 kWh, insulation material: Mineralwolle, insulation thickness: 50 mm, nominal power: 345 kW (469.07 HP), Equipment: lighting, MAIN STANDARD Our paint booths are designed to meet all necessary requirements for paint application, including air filtration, extraction, lighting, and a controlled environment. Booth processes are managed via a PLC system, ensuring that desired values are maintained consistently. OPERATING PRINCIPLES OF THE BOOTH The booth’s processes are managed through a control panel, which oversees the following steps: Dsdpfx Aowzmcboc Hjck PAINTING PROCESS During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled through the extraction unit. Floor filters (paint stop filters) collect paint particles, and the air passes through final exhaust filters before being discharged. FLASH-OFF PROCESS After painting, the booth continues operating for approximately 15 minutes to purge residual solvents and thinners. During this phase, fresh air circulates from outside into the booth. DRYING PROCESS In this stage, 80% of the air passing through the booth is heated to 60°C and introduced via a distribution system. Since 20% of the solvent is released during drying, it is expelled with the exhaust air. Industrial coatings are typically dried at 60°C, but the booth temperature can be adjusted as needed via the control panel. COOLING PROCESS After the 30-minute drying cycle, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the subsequent 5-minute cooling phase, fresh air from outside circulates through the booth, after which the system shuts down automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT These control panels govern the functions and operation of machines and devices housed within the booth. The panel is made of durable galvanized sheet and steel profiles and is fully enclosed to protect against dust and moisture. Electrical Equipment and Control Panel: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control connections between the control panel and motors or other electrical devices. • Electrical wiring is designed to accommodate booth relocation if needed. • Operating equipment uses 380 V 50 Hz, while control devices operate at 220 V. • The booth’s operation time can be monitored on the electronic control panel, enabling straightforward maintenance scheduling. • Temperature and time settings for booth ventilation (solvent flash-off), intermediate drying, and final drying can be easily adjusted to required values on the digital display of the electronic control panel. • Users can monitor and adjust the drying time using the heating thermostat and time relay.

Condition: used, Year of construction: 1998, operating hours: 8,260 h, Equipment: all wheel drive, * From municipal hands * Cemetery excavator - mini excavator * Manufacturer Kiefer - Boki 4550 * KW 40 / 1896 cc * VW engine * Operating hours: only 8260 h * Year of manufacture: 1998 * Dimensions: 4900 mm long, 1210 mm wide, 3200 mm high * ALL-WHEEL STEERING * Road legal * Heating Dcedpfxotttu Dj Ac Hjk * Hydraulic connection for HAMMER OPERATION * Extension for grab boom * Support extension * etc. * All information without guarantee * We reserve the right to sell the item prior to delivery * Please refer to our terms and conditions

Year of construction: 1992, condition: excellent (used), functionality: fully functional, machine/vehicle number: P-Z 176, We are offering this very well-maintained Steuer PZ 90 foil embossing machine, manufactured in 1992. Manufacturer: Steuer Dedpfx Aoy Ulitjc Hock Model: PZ 90 Year of manufacture: 1992 This is a machine from the manufacturer STEUER, model PZ 90. - Embossing cylinder format 90x65cm (instead of 90x65cm) - Base is height-adjustable. This embossing cylinder has special functions, such as 3 hologram tracks for embossing (original from PZ-Steuer). The main motor underwent a general overhaul in 2025. There are 3 bases available, and various accessories are included. Dismantling and loading are the responsibility of the buyer; we will only disconnect the machine from the power supply. If you have any questions or require further information, please feel free to send us a message by email.

Condition: reconditioned (used), Year of construction: 1999, Universal tool milling machine Make: KUNZMANN Model: WF 4/3 Year of manufacture: 1999 - partially overhauled, newly painted, RAL7035 light gray / RAL3027 raspberry red RAL7016 anthracite gray Mach. no.: 343006 with guarantee geometric acceptance with test report Accessories: - HEIDENHAIN TNC 124 path control - HEIDENHAIN HR 330 electronic handwheel - Fixed table 640 x 350 (T-slot: 14 mm) - Vertical milling head SK 40 with hydraulic tightening system ISO 7388 - Central lubrication, electric - Coolant system - Splash guard cabin, electrically secured - Control panel on the base - Operating instructions Used as seen Dcjdeub R R Sspfx Ac Hsk The machine is technically corresponding to the state of the year of manufacture.

Condition: good (used), machine/vehicle number: 110283-110155, Year of construction: 2012, AUTOMATIC LINEAR HANDLE APPLICATOR MACHINE MANUFACTURER AND&OR MODEL 50SIA3000R&P2 SERIAL 110283-110155 YEAR 03/2012 CAPACITY 3000 Bph Included: Dcjdequuv Iepfx Ac Hsk * Bunker for handles & tranportation convejor * Handle side rejection system OMRON ALSO FOR SALE : TRINE T4400 Labelling machine €17,800 with HOT MELT glue. S/N: 032M44045 Labelling speeds: 60 to 350 cpm USED Wrap around labeller used for PET bottles. Used with 0.33 / 0.5L / 1.5L Volume