TRNASFER HEADERS SACMA SP22 2 DIE 2 BLOW

SACMA SP22

Condition: used, Year of construction: 1976, functionality: fully functional, machine/vehicle number: M08I/8941, Offer Number: M08I/8941 Machinetype: 2 die - 2 blow transfer header Make: SACMA Type: SP22 Constr. year: 1976 diameter range: 10 mm number of dies: 2 number of stations (incl. cut off): 3 Fgodpewi Td Iefx Ah Esi cutting length: 110 mm shaft length under head: 100 mm output - pieces/min: 170 Location: Germany

Condition: used, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Maximum rolling force: 24 tons Maximum tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool/reception length: 180 mm Maximum workpiece diameter: 50 mm Fgsdpfjuz If Nex Ah Eei Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Electrical connection: 400 Volt, 50 Hz, 10 kW - Pivotable roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated in the machine base - Operating manual with electrical schematic Space requirements (L x W x H): 2,000 x 1,450 x 1,900 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling tools, having the same pitch as the workpiece, form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length is limited to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the width of the rolling dies. Through-feed tools are divided into three sections – entry, calibration, and exit. Knurling rolls have no pitch and are swiveled at the lead angle corresponding to that of the profile to be rolled. Lead angle rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and swivel angle results in the effective lead angle in the workpiece.

Year of construction: 1988, condition: good (used), Carlo Salvi 1 die 2 blow Model 780/SV Maximum Cutoff dia.mm: 6,35 Max. Cutoff length mm: 97 Max. K.O. length (die side) mm: 80 Fedpehrdmxsfx Ah Eegi Max. Speed, pcs, per minute: 360

Condition: ready for operation (used), A Wafios wire straightening and cutting machine with a straightening attachment of 1000mm is available. Wire diameter range: 1.5mm-7mm, cutting length range: 20mm-3000mm, straightening rotor speed: 6800rpm, pitch: 71/69, cutting stroke: 270/min, machine dimensions X/Y/Z: approx. 3300mm/1200mm/1800mm, weight: approx. 1400kg. An on-site inspection is possible. Fjdpfxoyvuuzs Ah Eegi

Condition: good (used), 1 used radial drilling machine manufactured by Stimin type GR 820 H No. 773 year 2004 Technical data: Drilling capacity 80 mm throat 1600 mm Drill spindle holder MK 6- drill spindle stroke 390 mm Spindle speed, 24 steps 20 - 1400 rpm Clockwise and counter-clockwise rotation Feed rate, 12 steps 0.045 - 1.5 mm/rev Drive 400 V / 14.5 kva Clamping of the arm and drilling unit electromechanical Distance machined machine bed - drilling quill min. approx. 400 mm max. approx. 1800 mm usable machine bed with 4 T-slots 1170 x 2185 mm Fjdpfx Ahjtzctms Eegi Coolant device 2 clamping tables Space requirement approx. L 2600 x H 3950 x W 1300 mm Weight approx. 8500 kg

Condition: used, KELLENBERGER KEL-VARIA R175 x 1500 is a CNC cylindrical grinder engineered for high precision, top accuracy and reliable production. Capacities: centre height 175 mm, distance between centres 1500 mm, Z-axis 1650 mm, workpiece weight on centres max. 150 kg; grinding wheel Ø500×80 mm (bore 203 mm) or Ø400×63 mm (bore 127 mm); max wheel travel 320 mm. Key specs: wheel speeds stepless 1000–2150 rpm (peripheral speed 45 m/s); feed 7500 mm/min; work spindle swivels -10/+100° with 8–800 rpm; permitted load 160 Nm; grinding spindle motor 7.5 kW; work spindle motor 2 kW; 3×400 V 50 Hz; rapid 15 m/min; approx. weight 6000 kg; dimensions 4700×2300×2000 mm; air 6 bar. Accessories: coolant system, paper filtration, MARPOSS touch probe, set of grinding wheels, rotary centre, set of centers, set of workpiece drivers, set of throat gauges, lamp, 2 tool cabinets, tailstock with fine adjustment, oil mist extractor, spindle nose for collets. Achieves tight tolerances; typical applications: automotive, watchmaking, machine tool Fgjdpsyxn Itefx Ah Esi

Condition: used, Grinding wheel dimensions (od x id x width) Ø 650 x Ø 304.8 x 500mm Min/max diameter to be ground 3 / 200 mm Width of regulating wheel 500 mm Number of regulating wheel speeds Infinite Min/max speed of regulating wheel (r.p.m.) 10 / 255 r.p.m. Diamond dressing (auto/manual) Automatic longitudinal, manual penetration for both wheels Diamond dressing speed 255 r.p.m. Number of CNC axes 1 Regulating wheel dimensions (od x id x width) Ø 350 x Ø 203.2 x 500mm Width of grinding wheel 500 mm Maximum length to be ground in plunge grinding 500 mm Power of grinding wheel head motor 55 Kw Power of hydraulic motor 3 Kw Total power 60 Kw Voltage 220/380V Length 2,300 mm Width 2,800 mm Height 2,100 mm Weight 15,000 Kg Fjdpfxjix N Enj Ah Ejgi

Condition: used, Year of construction: 2010, grinding diameter 350 mm grinding length 1000 mm centre height 175 mm Fjdpfey U N Hijx Ah Eegi Control Fanuc 310is CNC control GE Fanuc 310is Hand panel for CNC control GE Fanuc Wenger loader optional Turned part with automatic indexing 1° Grinding head UR 1-2-3 Grinding wheel equipment left 500 x 80 mm Grinding wheel equipment right 400 x 63 mm Operating unit for one high-speed internal grinding spindle MFV / MFZ High-frequency internal grinding spindle MFN 1090 Coolant supply through the workpiece spindle Dressing unit on the upper table Swivelling holder for PCD diamond plates Basic module for KEL-TOUCH gate sensor and KEL-BALANCE balancing devices KEL-TOUCH lead sensor for universal grinding head variants R / RS / UR / URS KEL-TOUCH on the workpiece headstock for internal and external grinding Preparations for Movomatic ESZ 400 or Marposs P7 ME measuring controls Preparation for external filters Cooling lubricant switch-off for table devices Full casing emulsion Emulsion sanding mist extraction system Maintenance unit for additional pneumatic functions Preparation for KEL-VITA gantry loader KEL-POS, MOVOMATIC: C25 measuring probe Hydraulic preparation for arobo bezel

Year of construction: 1981, condition: used, pressure 63 t Fgsdpfolp U R Iex Ah Eei stroke 6-60 mm no. of strokes 90-550 Hub/min 300 mm table surface area 780x600 mm ram surface 807x460 mm tool hole in ram Ø 40 mm ram - range of adjustment 80 mm total power requirement 15 kW weight of the machine ca. 8 t dimensions of the machine ca. BxTxH 2900x2000x3000 m

Condition: good (used), 1 used hardness tester Fsdpfx Ahexup Uwj Eogi Manufacturer: Mitutoyo Model: Wizard 810 208 D Testing methods: Rockwell Brinell