Saw and log splitter for firewood

ROLTRAC R380 Automatic

Condition: new, Year of construction: 2025, Device description Nwsdpfx Aewnxcmedhjp The splitter has an overload valve that drains oil to the tank and an efficient, failure-free gear pump. The tree lifting system makes it easier to place heavy materials directly under the splitting wedge 5-pin power connection The wedge set at an angle makes it easier for the wedge to sink into the material. FAILURE-FREE HYDRAULIC PUMP 24l! Technical parameters Pressure force 22 TON Minimum wood diameter 80 mm Maximum wood diameter 700 mm Minimum wood length 350 mm Maximum wood length 1100 mm Splitting speed (continuously adjustable) 10.5 cm/s Return speed 7.5 cm/s Wedge stroke length 948 mm Total engine power (S1;S6) S1:5.1 kW S6: 6.6 kW Voltage 400 V Hydraulic tank capacity 24 l Hydraulic system pressure 27.7 Mpa Dimensions 1050 x 1550 x 2500 mm Weight approx. 320 kg

Condition: excellent (used), Fully automatic line for poles/stakes production, Infeed conveyor, step feeder, chain conveyor , 2 head rounding machine, separation unit, cross cut sizing saw, pointing/chamfering unit, also possible to make chamfer/chamfer or 2 poles same time pointing chamfer and chamfer/chamfer. max diameter 120 mm Nwedpfx Adotyv S Ishsp

Condition: excellent (used), Complete saw line with infeed,ARI SKR 600 reducer, ARI KS 122 Saw, ARI BKR 600 2:nd reduser, ARI DS 70 multi rip and ARI KT 52 eding line with full scanner Nwsdoikvl Ropfx Adhsp Full bottom floor for waste handling All electrical cabinets and hydraulics

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: SK-K-24001, Optimizing cross-cut saw line with scanner Manufacturer: Dimter Type: OptiCut 450 Year of manufacture: 2015 Item no.: SK-K-24001 Njdpfswya Sysx Adhewp DIMTER cross-cut saw line with 1 x OptiCut 450 and F 100 feeding system with LuxScan CombiScan+ C 200 and curvature measurement The line was in operation until 2024, has been professionally dismantled and can be viewed.

Condition: used, functionality: fully functional, Year of construction: 2024, load capacity: 5,000 kg, fuel type: diesel, mast type: triplex, construction height: 2,770 mm, empty load weight: 7,710 kg, total length: 4,610 mm, drive type: Diesel, construction width: 2,010 mm, Mast type: Triplex Technical condition: New STANDARD EQUIPMENT - Open FOPS cab - Tiltable cab with tilt support - Safety belt with sensor monitoring - Seat with presence sensor - Rotating headlights - Audible reversing alarm - Emergency stop button - Hill Holder - Hill start assist - Rear-view mirror - Adjustable, ergonomic seat - Tilt and depth adjustable steering wheel - Joystick for full control of all main functions - Armrest - Second generation FullGrip® (4x4) - Limited slip differential on front axle - Inching pedal - ECO Mode system - Digital display - Diesel filter with water separator - Negative brake FORK - Fork 1.200 mm - Fork carriage plate 1,660 mm type FEM IV - Integrated sideshift Nwsdotr Ufdspfx Adhsp

Condition: excellent (used), Gitterbox, load carrier Collapsible Color: green Floor: flat steel plate Nodpjlcct Sefx Adhswp External dimensions: 1600x1200x1000 mm Weight: 150kg

Year of construction: 2010, condition: excellent (used), functionality: fully functional, The following machines, all in very good condition, are available for sale – perfectly suited for professional use in the wood processing industry. Saw line consisting of: • Feed unit ZV21, model EV 50 • Profiling chipper ZD31, model VM50 • Outfeed unit AV31, model VZM • Centering device VZ21, model VZV • Log rotation device DV21, model DV70-2 • Infeed and centering unit EVP • Profi Chipper VM50 • Profiling unit VMP450 F61 (4x110kW) Nwodpfow Stiuox Adhjp • Microtec measuring system Additionally available Other used woodworking machines ?️ Also available: Additional used woodworking machinery Log infeed Springer  • 5-arm design  • Log distributor (5-arm)  • Receiving tipple transfer (26 m) Log rotation device LINCK DV35/DV1 (new)  • Dimensions: 2.0 m (L) x 2.4 m (W) x 2.5 m (H)  • Weight: approx. 1.5 t  • State-of-the-art rotation technology for precise positioning 2 units chipper infeed – infeed and centering unit EV30  • Dimensions: 5.5 m x 2.2 m x 2.1 m  • Weight: 8 t each Separator conveyor  • Dimensions: 8.6 m x 2.0 m x 2.6 m  • Weight: 7 t 2 units LINCK chipper V30 (incl. spare chipper discs)  • Dimensions: 5.5 m x 2.3 m  • Weight: 11 t each Saw VS 66 – left & right side  • Dimensions: 2.8 m x 2.1 m x 2.5 m (each)  • Weight: 3 t each LINCK pre-centering unit  • Dimensions: 3.0 m x 2.0 m x 1.1 m  • Weight: 0.8 t Log infeed with loader and log conveyor Location & Availability All machines are located at our warehouse, A-3525 Lugendorf No. 38, and are available immediately. Price upon request For further information or to arrange a viewing appointment, please do not hesitate to contact me.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, overall weight: 250 kg, load capacity: 16 kg, We at Binici MB GmbH also have other industrial robots in-house. All our robots are fully functional (with complete accessories). We are at your disposal for good advice Nwedpfov Diuyjx Adhjp

Condition: used, Year of construction: 2023, Spraying machine KaMa, KR BM 1000 B, The spraying machine is a demonstration model from a trade fair. It was only used for test and demonstration purposes. With 1 piece HD pump Bings Marple 8/25 up to 175bar and 4 pieces Nwjdpfx Aoumvnhedhep airless spray guns Krautzberger KAA1300. Machine equipped with change-over valve for quick color change, lever switchable to max. 3 color circles and 1 rinsing agent pump (options). In Ex-version. Machine is ready for demonstration at the warehouse in Blomberg. - Producer Ka-Ma - Type KR BM 1000 B - Year of construction 2023 - Working width 1.200 mm - Single gun drive system - Dry filter system - Transport belttransport System - Feed speed adjustable 2 - 8 m/min - Lacquer reclaiming system with v-belt - Gun control system SPS, LS - Number of installed lacquer circles 3 Stk. - Number of installed spraying guns 4 Stk. - quick change system for spraying guns - spray gun type Krautzberger KAA1300, Airless - Airless spraying system - Height adjustment for spraying guns 150 mm - Producer lacquer pump Binks Maple 8/25 bis max. 175bar - Supply air box - Suitably for water based lacquer - Length 3243 mm - Width 3482 mm - Height 2450 mm - Voltage / HZ 400 / 50 - Colour 7035, lichtgrau - Weight 3.100 kg _____ Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. For further information, get in touch with us!

Condition: new, functionality: fully functional, Year of construction: 2025, working width: 600 mm, ✅ New & In Stock ✅ Ideal for Tall Grass & Large Meadows ✅ Shipping Available SCHORR FLAIL MOWER RR600HM HIGH GRASS MOWER 8HP 252CC MULCHER - Effortlessly mows tall grass and dense scrub - Powerful 252 cc 4-stroke engine (8 HP) – strong & reliable, even in thick vegetation - 60 cm cutting width – ideal for large areas and tall grass - 32 Y-blades made of hardened steel – efficient mulching of material up to 2.5 cm diameter - Robust 4-speed gearbox – 3 forward & 1 reverse gear for maximum control - Cutting height infinitely adjustable (20–80 mm) – precise results for any terrain - Self-propelled & easy to operate – even on slopes or uneven ground FEATURES / SPECIFICATIONS Whether it’s tall grass, dense brush, or woody growth: this flail mower gets the job done reliably and consistently. The SCHORR RR600HM is built for tough tasks – equipped with a powerful Loncin 4-stroke petrol engine (252 cc) delivering a solid 8 HP. At its core is a 4-speed gearbox (3 forward / 1 reverse), allowing precise control even in demanding ground conditions. With 32 robust Y-blades made from hardened steel mounted on a sturdy rotor, the RR600HM provides uniform and fine mulching. Whether on meadows, orchards, field margins, or fallow land – even branches up to 2.5 cm in diameter are processed with ease. Its 600 mm cutting width enables productive work while maintaining high maneuverability. The cutting height can be adjusted tool-free using the handwheel (20–80 mm), allowing flexible response to terrain and vegetation. The RR600HM is designed for intensive applications – be it overgrown gardens, large green areas, or agricultural environments. The robust construction, deep-tread drive wheels, and self-propulsion ensure confident traction – including on slopes and uneven ground. Up to 6,000 m² can be efficiently and comfortably managed with this flail mower. A professional-grade flail mower for demanding users, farmers, municipalities, or landscape contractors. For those seeking more than just a lawn mower, this machine provides real power at a fair price. Technical Data Manufacturer (abbreviation): SCHORR Manufacturer model: RR600HM Drive type: Self-propelled (3+1 speed gearbox) Blade type: Hammer flail Number of blades: 32 Y-blades Cutting height min. / max.: 20mm / 80mm Cutting width: 600mm Weight: without packaging: 146kg / with packaging: 180kg Basic Dimensions Njdpfx Adswtqdmehjwp Overall length: 1790mm Overall width: 730mm Overall height: 1150mm Discharge angle: 360º Engine Air-cooled single-cylinder four-stroke (OHV) engine Displacement: 252cc Max. output: 5.9kW / 8HP Fuel type: Petrol (RON min. 95) Starter: Recoil starter (pull cord) Power transmission: V-belt Spark plug: F7RTC or equivalent Fuel tank capacity: approx. 5L Engine oil capacity: approx. 1.1L Our knowledgeable team is happy to answer any questions you may have about the SCHORR RR600HM Flail Mower for High Grass. You can reach us by phone or email. We look forward to hearing from you and assisting with your inquiry. Find the initial investment for a flail mower too high? No problem, we also have some used machines in stock. Feel free to contact us.