Water treatment plant
RIEFILT RO-Umkehrosmoseanlage

Name: RIEFILT RO-Umkehrosmoseanlage
Brand: RIEFILT
Availability: InStock

Year of construction

2025

Condition

New (fully functional)

Location

Lüneburg

Water treatment plant RIEFILT RO-Umkehrosmoseanlage

Machine data

Machine type:: Water treatment plant

Manufacturer:: RIEFILT

Model:: RO-Umkehrosmoseanlage

Year of construction:: 2025

Condition:: new

Functionality:: fully functional

Price & Location

Location:: Lüneburg, Germany

Call

Technical details

Input voltage:: 400 V

Type of input current:: three-phase

Pressure:: 70 bar

Total height:: 1,600 mm

Total width:: 800 mm

Total length:: 1,200 mm

Temperature:: 40 °C

Operating pressure:: 70 bar

Noise level:: 80 dB

Equipment:: documentation/manual, rotational speed infinitely variable

Details about the offer

Listing ID:: A19895110

Reference number:: RF-RO510

Update:: 08.12.2025

Description

RO 510-DT2-15S – Compact Seawater Reverse Osmosis System, approx. 15,000 L/day Potable Water

Compact, fully automated reverse osmosis system for the production of hygienic drinking and process water from natural seawater. Ideal for maritime applications, island supply, hotels, as well as small-scale industrial and utility operations.

Technical Specifications

Type: RO 510-DT2-15S

Process: Reverse osmosis with Disc-Tube (DT) technology

Permeate Output: Approx. 15,000 L/day (15 m³/day, depending on operating conditions)

Feed Water: Seawater with high conductivity, approx. 55,000 µS/cm (high salinity)

Permeate Quality: Drinking water, approx. 500 mg/L residual minerals (reference value)

Recovery Rate: Approx. 30% (typical operating range) at 55,000 µS/cm conductivity

Design Temperature: Approx. 25°C (Operating range: approx. −2 to 35°C)

Process Technology & Configuration

DT module with open feed channel – highly fouling-tolerant and fully cleanable

Mechanical pre-filtration (high-performance filter + 10 µm cartridge filter)

Chemical pre-treatment of feed water (acid dosing) generally not required

Integrated rinsing and CIP (clean-in-place) function, PLC controlled

Skid-mounted on stainless steel frame (AISI 316)

High-pressure lines in stainless steel, low-pressure section in seawater-resistant plastic

Pumped seawater components made from corrosion-resistant materials

Operating & Energy Data

Feed Water Flow: Approx. 1,000 L/h (reference value)

RO Module Operating Pressure: High pressure range, designed for seawater desalination

Power supply: 230 V, 50 Hz, single phase

Connected load: Approx. 6 kW

Control, Monitoring & Safety

Local operator panel with integrated PLC control

Monitoring of pressures, flows, conductivity, and operating hours

Automatic shutdown in case of:

- Insufficient feed pressure
- Exceeding permissible operating pressure
- Overpressure in permeate/concentrate lines
- Exceeding defined conductivity limits (with automatic redirection to drain)

Automatic “Stop & Rinse” function: Permeate flushes all seawater-contacted components on shutdown, reducing fouling during system standby

Dimensions & Weight (Skid)

L × W × H: Approx. 1,190 × 705 × 1,500 mm

Weight: Approx. 530 kg (dry), approx. 605 kg (operating)

Typical Applications

Vessels, offshore platforms, ports

Island and coastal supply

Hotels, resorts, small industrial and utility operations

Backup or peak load system for existing potable water production
Dwsdjw Uf Ihopfx Akvsa

Additional technical documentation, photos, and information on scope of supply, pricing, and availability are available on request.

The listing was translated automatically. Translation errors are possible.

Documents

19895110-01.pdf
19895110-02.pdf

Seller

Registered since: 2023

3 listings online

Call

Send inquiry

Telephone & Fax

+49 176 3... show

These listings may also fit your interest.

Listing

Commonrail injector test bench Hartridge CRi PC

Apeldoorn

18,521 km

Commonrail injector test bench
HartridgeCRi PC

€8,950

ONO plus VAT

Call

Year of construction: 2008, condition: good (used), functionality: fully functional, machine/vehicle number: CRi PC singelline, Well-functioning Common Rail diesel injector test bench. The machine is equipped with a new PC and recent software. It is supplied with a large selection of clamping blocks, test cables, return connections, and high-pressure pipes. Dwodpfoxiyxvox Akvja

See details

Listing

Diesel generator 1100 kVA Atlas Copco DTAS 1100 E

Rossum

18,586 km

Diesel generator 1100 kVA
Atlas CopcoDTAS 1100 E

Call

Condition: excellent (used), Year of construction: 2016, operating hours: 160 h, functionality: fully functional, nominal power (apparent): 1,100 kVA, We offer in good condition Atlas-Copco DTAS 1100 E - 110 kVA generator Year of construction: 2016 Working hours: 160 hours Fuel: Diesel Tankcapacity: 1000 liter Dwedeyy Dkajpfx Akvoa Powered by MTU Motor. More details available on request, generator is directly available.

See details

Listing

Wielka Nieszawka

17,812 km

Overhead Cranes
WNM Sp. Z O.O.

Call

Condition: new, Year of construction: 2026, ⭐️ CAPACITY FROM 1 TON TO 100 TONS ⭐️ Dsdpfewr A Aljx Akvjwa ⭐️ DIMENSIONS – CUSTOM SIZE AGREED WITH THE CLIENT ⭐️ ✅ Overhead crane, commonly called a bridge crane, eot crane, is a type of crane found in industrial environments. An overhead crane consists of parallel runways with a traveling bridge spanning the gap. A hoist, the lifting component of a crane, travels along the bridge. ✅ Usually there are include many kinds of types crane, firstly it was divided into single girder and double girder overhead crane. There are included normal type, european type, magnetic crane, grab crane, explosion proof crane, and so on. ✅ According to the different using environment and different application. We will choose the most suitable crane for customer

See details

Listing

Firefighting water tanker vehicle with 2600 L water capacity Iveco 135E22 TLF 16/25 4x4 Allrad MAGIRUS

Berlin

18,129 km

Firefighting water tanker vehicle with 2600 L water capacity
Iveco135E22 TLF 16/25 4x4 Allrad MAGIRUS

€12,900

ONO VAT not applicable

Call

Condition: used, functionality: fully functional, mileage: 34,000 km, power: 161.81 kW (220.00 HP), axle configuration: 4x4, fuel: diesel, Year of construction: 1995, Equipment: additional headlights, all wheel drive, trailer coupling, Are you looking for a reliable and affordable emergency vehicle for your fire department? Then you have come to the right place! From our immediately available stock of used vehicles, we offer: Water Tank Firefighting Vehicle TLF 16/25 ALL-WHEEL DRIVE 4x4 Magirus on IVECO 135E22 The TLF 16/25 is the proven combination of the advantages of crew fire engines and water tank firefighting vehicles. With a squad crew and ample space for firefighting and rescue equipment, the vehicle is prepared for most operational scenarios. General Data: • Year of manufacture: 1995 • Mileage: approx. 34,000 km Chassis: • IVECO 135E22 4x4 with 220 HP (159 kW) • Diesel engine with manual transmission Cab: • Standard, spacious crew cab (1+5) in RAL 3000 (fire red) • Mounts for 2 self-contained breathing apparatus in the crew compartment Dsdpfx Akjxk T Efovjwa Bodywork: • Manufacturer Magirus Eurofire • TLF 16/25 body according to DIN standards • Three large lateral equipment compartments each side • Extendable steps for the front side equipment compartments • Brackets for standard equipment load • Mounts for 2 additional breathing apparatus • Roof compartment Fire Pump / Water Tank: • Magirus FPN 1600-8 centrifugal fire pump • Capacity 1,600 l/min at 8 bar • Water tank 2,600 l Firefighting Equipment: • Fixed rapid action hose reel, 50 m, in upper compartment G6 Safety and Lighting: • 2 rotating beacons at the front and 1 at the rear • Pneumatic special signal system (Martin horn) • Rear-view camera • Hygiene board available on request We are happy to provide you with a specific offer and can present the vehicle to you in detail at our premises in Berlin. All information is provided to the best of our knowledge and belief, without guarantee of completeness or accuracy. This advertisement does not constitute an offer, but is for information purposes only. Subject to prior sale!

See details

Listing

2023 Perkins 2806A-E18TAG2 - 650/700 KVA Perkins 2806A-E18TAG2

Waregem

18,745 km

2023 Perkins 2806A-E18TAG2 - 650/700 KVA
Perkins2806A-E18TAG2

Call

Listing

Germany

18,384 km

Frame Filter
SeitzOrion 60

Condition: ready for operation (used), A Seitz filter machine including a Schenk dosing device for beer production is available. 1) Kieselguhr frame filter Seitz Orion 60, max. throughput capacity: 70hl-80hl/h, effective throughput capacity: approx. 45hl/h, max. total filtration capacity: approx. 600hl, pressing device: 2-stage planetary gear, number of plates: 36, number of end plates: 2, plate dimensions X/Y: 600mm/600mm, pipe diameter: 50mm, nominal width: NW50, machine dimensions X/Y/Z: approx. 3800mm/1100mm/1400mm. 2) Dosing device Schenk DO-S120, year of construction: 1971, capacity: approx. 160l/h, high-speed capacity: approx. 320l/h, nominal width: NW50, pipe diameter: 50mm. Documentation available. On-site inspection is possible. Dsdpfxowd Tals Akvswa

See details

Listing

Hybrid Press Brake 4100 x 220 Ton MVD HC SERIES

Concordia Sagittaria

18,491 km

Hybrid Press Brake 4100 x 220 Ton
MVDHC SERIES

Call

Condition: new, Year of construction: 2025, functionality: fully functional, stroke length: 310 mm, operating speed: 10 mm/s, reverse speed: 200 mm/s, throat depth: 410 mm, oil tank capacity: 220 l, travel distance X-axis: 750 mm, controller manufacturer: ESA, controller model: S 875W, working width: 4,100 mm, bending force (max.): 220 t, back gauge: 750 mm, distance between stands: 3,600 mm, control type: CNC control, degree of automation: automatic, number of support arms: 2, back gauge adjustment: CNC-controlled, number of axes: 8, type of crowning: CNC-controlled, Hybrid Bending Press MVD 4100 x 220 Tons HC-Series CNC ESA S 875W 21″ *dxf 3D ready 8 axes (Y1-Y2-X-R-Z1-Z2-X5_conical_A1) Automatic WILA crowning table Dsp Laser GIVI MISURE high-precision optical scales UNIMEC back gauge Upper tool clamp: Promecam Rolleri Type H = 150 mm Multi-cavity die, full length Dwodex N Rxcjpfx Akvea Press force: 220 tons Bending length: 4100 mm Distance between uprights: 3600 mm Throat depth: 410 mm Table – ram opening (“light”): 515 mm Working height: 965 mm Y-axis stroke: 310 mm Y-axis descent speed: 200 mm/s Y-axis working speed: 0–10 mm/s Y-axis return speed: 200 mm/s X-axis back gauge stroke: 750 mm Power: 18.5 kW Dimensions (L x W x H): 5600 x 2200 x 3040 mm Approximate weight: 13,700 kg

See details

Listing

Hammelmann HDP 42 Hammelmann Falch Woma Uraca Hammelmann HDP 42

Sandersdorf-Brehna

18,253 km

Hammelmann HDP 42
Hammelmann Falch Woma UracaHammelmann HDP 42

Call

Listing

WIG welding unit, WIG welding machine, WIG and electro DC welding unit, E-welding machine also suita L-TEC TIG 200 DC

Hessisch Lichtenau

18,422 km

WIG welding unit, WIG welding machine, WIG and electro DC welding unit, E-welding machine also suita
L-TECTIG 200 DC

€770

Fixed price plus VAT

Call

Condition: used, Wig welding machine L-TEC, Inverter TIG 200 DC type WIG welding machine for direct current DC Serial no. 184548, year of manufacture approx. 1994 Power: 200 Amps = 60% duty cycle 155 Amps = 100% duty cycle Adjustment range: stepless Current type: DC (direct current) Mains connection: 400 Volts, 50 Hz, 32 Amps plug - 4 meter hose set with central connection and hand torch - with remote potentiometer (foot switch) - gas pressure regulator - DC only - HF ignition Dedpjdzqb Ejfx Akvowa Space requirement L x W x H: 850 x 480 x 740 mm Weight: approx. 150 kg The welding test yields very good results when welding stainless steel with direct current. Otherwise in good condition.

See details

Listing