Oil spraying automat

Renojava 80

Condition: used, Year of construction: 1997, - Edge banding unit Kjdpfx Apjd Inkts Aedp - Cutting unit - Milling unit - Fine milling unit - Scraper blade - Buffing unit

Condition: used, No. 3213 Thermal treatment system / vacuum dryer WTT Used, year of construction 2017 Thermal treatment system / thermal chamber for the modification of wood The WTT thermal chamber is a system for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on the thickness and type of wood. The system has a powerful energy and heat transfer system and works with a gas or oil-fired boiler system that uses thermal oil as a heat transfer medium. Technical data: Capacity: 5950 - 9900 m³ of wood per year (for 330 working days) Usable volume: 9 m³ (with 50 mm wood thickness) Stack dimensions: 10500 x 1300 x 1100 mm LWH Minimum board thickness: 10 mm Power connection: 3 x 400 V, 50 Hz + zero + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heat output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel duplex EN 4462 Door opens hydraulically, with 1.5 kW drive Working pressure: 0.1 to 15 bar (absolute) Working temperature: 0 °C to 220 °C 200 mm glass wool insulation, clad with 1 mm galvanized sheet steel Main components: 1. autoclave, in which the heat treatment takes place 2. vacuum system that sucks the air out of the autoclave before heat is applied 3. energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. nitrogen generator 6. gas cooler system Heating and cooling system: Heat exchanger: 8 units (4 on each side) Material: Stainless steel pipes (seawater resistant) Total floor area: 165 m² Cooling water consumption: 1000 l/batch (not contaminated, only heated) Kodpfx Ajv Si Szop Asdp Control and operation: Control system: WTT ExoT (fully automatic) 22” color monitor, IBM computer, printer Sensors: 4 PT100 temperature sensors 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special equipment: Hydraulic rail bridge for convenient transportation of wooden trolleys Automatic trolley extraction with cable winch (1.5 kW) 2 MW thermal oil boiler (heating) Fuel oil tank (4000 l) with measuring system Insulated 20 foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6000 mm length) Functional description: 1. filling the autoclave with wood 2. creating a pre-vacuum 3. filling with gas 4. heating 5. modifying 6. cooling 7. pressure equalization 8. creating a post-vacuum / drying 9. pressure equalization 10. emptying Certified EC Pressure Equipment Directive (PED) 97/23/EF Construction EN 13445 Sale on behalf of customer, from location near 5020 Salzburg (Austria), without dismantling, transportation and assembly Dismantling, loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: new, Year of construction: 2024, shaft length under head: 80 mm, thread length: 55 mm, travel speed (max.): 480 mm/min, THREADING MACHINE E.W. MENN GW63 Refurbished as new acc. to CE Stand. Completely overhauled. New Guides, vibrator, new vibrating evacuation. Kdedpfst Uucaox Ap Ajp New electrical system with Inverter and PLC M8x80/55 mm. 480 ppm. Thread diameters (min./max.): 3 - 8 mm. Dies length: 115/130 mm. To be viewed and tested at HBR srl - Calolziocorte (LC)

Condition: new, Year of construction: 2022, Diameters 40-140mm Engine 2.2kW Price per 1 piece Kedpedprvuofx Ap Asdp

Condition: good (used), Year of construction: 2000, Weinig High Mech E6 infeed + A5 outfeed + stacker 1. Weinig pack infeed roller conveyor. 2. Weing pack tilt 3. Weinig flat chain cross feed conveyor with single board feeder. 4. Weinig reject sorting unit with roller tracks. 5. Weinig EM814 moulder infeed with flat chain feeder. 6. Weinig outfeed 3m belt accelerator conveyor. 7. Roller conveyor with cross feed chain kickers. 8. Weinig cross feed buffer belt conveyor. 9. Weinig flat chain stacker with scissors lift roller conveyor. 10. Weinig pack outfeed roller conveyors. Kdedpfx Apowgbw Re Ajp Possible to offer with additional Weinig bundling system if needed.

Condition: good (used), Year of construction: 1972, Scissor lift table, scissor lift table, scissor lift platform, scissor lift platform, single scissor lift table -Manufacturer: Lödige, scissor lift table Kodpfemghawjx Ap Asdp -Load capacity: 1000 kg -Platform: 3000 x 2000 mm -Dimension retracted: height 390 mm -Dimension extended: height 2000 mm -Hydraulic unit: Bauknecht 3 kW / 150 bar -Transport dimensions: 3000/2000/H390 mm -Own weight: 2100 kg

Year of construction: 2005, condition: good (used), machine/vehicle number: C9 15840, Profile brushing machine Tagliabue LB 2 Model: LB 2 Kjdpfx Apsg Rn Ias Aodp TECHNICAL DATA: Year of manufacture: 2005 Tagliabue edge sander with 4 oscillanting sanding units. Two vertical rollers and 2 inner transversal rollers, for transversal brushing.

Year of construction: 1998, condition: excellent (used), Kap Saw Reinchardt NC 700 automatic Manufacturer Reinchardt Model / machine type NC 700 Year of production 1998 Machine category Kapła Kapowa Location Gorzów Wlkp. Conditions of delivery OWN RECEIPT Cost of delivery Customer cover Start type to be agreed Description Comments Kdodpjd H Hmhjfx Ap Aep CUTTING SAW FOR CUSTOMIZED DIMENSIONS, ACCURACY UP TO 1MM, NEW CONTROLLER, SAW BLADDER BY HYDRAULIC AGREEMENT

Condition: like new (used), Year of construction: 2020, We offer this second hand IWT Moldrup-SPP Hydro-Thermal Treatment Plant Industrial MOLDRUP-SPP plant designed for hydro-thermal modification of timber up to 2,600 mm diameter and 12,000 mm length. Built in heavy-duty stainless steel and engineered for continuous industrial production with fully automatic PLC control. Industrial Hydro-Thermal Wood Modification Plant – Ø2,600 x 12,000 mm Industrial hydro-thermal treatment plant designed for efficient and uniform thermal modification of timber in a controlled oxygen-free environment. The plant is built around a heavy-duty Ø2,600 mm × 12,000 mm stainless steel autoclave, handling approximately 15–22 m³ of timber per charge, with operating pressure up to 12 bar (abs). Fully automated via PLC, the system enables precise control of vacuum, pressure, temperature and multi-phase process cycles. The integrated vacuum system ensures safe oxygen removal, while the thermal oil heating system provides accurate temperature management throughout the treatment process. Kdsdpfjymxqaex Ap Asp The complete installation includes pressure vessel, heating system, vacuum pump, circulation fan, condensate handling, trolley loading system and safety equipment. Thermal oil boiler skid and emission control equipment are included. Technical documentation available on request. The complete hydro-thermal wood treatment plant is sold as seen / as is. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2008, We are offering this used STORTI GSI / 170-TA9 pallet production machine, year of manufacture 2008. Complete line includes: Kdsdeyvggzopfx Ap Asp Block-making unit 2 nailing machines Turners Brand marking (burning) Corner cutting Stacker Fully operational, was in use until recently. If you have any questions or need further information, please contact us by message or phone.