Sell machines Sell
Watch list (0) Login
Menu
  2. Air compressors & pneumatic equipment
  3. Compressors
  4. Screw compressors
  5. Listing ID: A22079598
Home Page Air compressors & pneumatic equipment Compressors Screw compressors Listing ID: A22079598

Screw compressor
Renner RSKF-PRO 7,5

Starting price
€5,000
Year of construction
2023
Condition
Used
Location
Berlin Germany
Screw compressor Renner RSKF-PRO 7,5
Screw compressor Renner RSKF-PRO 7,5
Renner RSKF-PRO 7,5
Renner RSKF-PRO 7,5
  Observe auction

Machine data

Machine type:
Screw compressor
Manufacturer:
Renner
Model:
RSKF-PRO 7,5
Year of construction:
2023
Condition:
ready for operation (used)

Technical details

Power:
7.5 kW (10.20 HP)
Pressure (min.):
6 bar
Pressure (max.):
15 bar
Noise level:
62 dB
Compressed air tank capacity:
270 l

Provision

Location:
Berlin, Germany Germany – Distance: about 18,131 km
Availability:
as of end of auction
Delivery conditions:
EXW
Costs for dismantling & loading:
Pick up at location:
free
Shipping costs:

Description

The machine has already been dismantled and stored by a qualified technician.

TECHNICAL DETAILS

Dcodpjzb Idrsfx Agvjh
Operating overpressure: 15 bar

Delivery rate (at 15 bar): 400 - 790 l/min
Delivery rate (at 13 bar): 430 - 860 l/min
Delivery rate (at 10 bar): 330 - 1,090 l/min
Delivery rate (at 8 bar): 330 - 1,240 l/min
Delivery rate (at 6 bar): 330 - 1,370 l/min

Volumetric flow rate: 90 m³/h
Air connection: 1/2" inches

MACHINE DETAILS

Compressed air tank: 270 l / 11 bar, upright, galvanized

Residual oil content at 20°C max.: 0.01 mg/m³
Differential pressure wet, saturated: 110 mbar

Rated power of drive motor: 7.5 kW
Operating voltage / frequency: 400 ~3 / 50 V/Hz
Sound level: 62 dB(A)

Dimensions & Weight
Dimensions (L x W x H): 1,079 x 553 x 1,014 mm
Machine weight: 273 kg

EQUIPMENT
Refrigerant dryer
Frequency control
Prefilter grid
Electronic control RENNERtronic Touch
Level-controlled condensate drain KN5 230VAC, shortened version
Schneider mounting kit ABZ-Eco 3100 Uni condensate drain Ecomat
Schneider condensate collection line, 3 connections
Pre-filter LPPN 73 FF5
Particle filtration 5 microns
Sub-micron filter LPPN 73 SMA
Particle filtration 0.01 microns
Wall mount incl. connection kit for 2 filters LPP 23 - LPP73
2x connection hose VSL 1/2"-1300 mm
Oil-water separator KON-P 5

Note: Accessories are without guarantee. The principle applies: "Item purchased as seen." The prospective buyer must verify the completeness of the item on site.

The listing was translated automatically. Translation errors are possible.

Payment processing

Closing costs:
18 %
Terms of payment:
100 % prepayment
Payment methods:
Vorkasse Überweisung IconBank transfer
Mastercard LogoVisa LogoCartebleue LogoKlarna LogoiDEAL | Wero Logo
Invoicing will be in the amount of the highest bid plus any dismantling/loading costs and shipping costs as well as the closing costs and statutory VAT.

Details about the offer

Listing ID:
A22079598
Reference number:
AUC-2606096
Update:
08.06.2026
Exclusive offer:
Only available in auction
  Observe

Contact

Cedric Schuhmann
Contact person: Cedric Schuhmann
Machine-ID: 22079598
SiegelSiegel

Machineseeker buyer protection

Secure payment via escrow account
Strictly controlled seller
Personal and multilingual support
Payout of the purchase price only after handover of goods

Inspection

Inspection possible
Machineseeker generally recommends inspecting used machines.
All information is given to the best knowledge and belief. See for yourself on site.

Seller

Trustseal
Professional commercial seller
With Machineseeker since 2016
Sachsen Germany Germany
Distance: about 18,196 km

Your machine could be offered here

Auctioning with the No. 1

You will sell within just a few weeks!
You will sell at the highest price!
You will sell with no fixed costs and no risks!
or call +49 201 857 861 10
Discuss collaboration
Items from the same location:
Auction
Edgebander Hebrock K36
Edgebander Hebrock K36
Edgebander Hebrock K36
Ends in 
d  h  min  s  Auction ended
Germany Berlin
18,131 km
Edgebander
HebrockK36
buyer-protection
€45,000
To the auction
Condition: ready for operation (used), Year of construction: 2024, workpiece height (max.): 60 mm, feed rate X-axis: 10 m/min, spindle speed (max.): 16,000 rpm, control type: PLC-controlled, The machine has already been disassembled and stored by a specialist. TECHNICAL DETAILS Rotational speed of the miter saw station: approx. 16,000 rpm Rotational speed of the milling station: approx. 16,000 rpm Maximum milling depth: 3 mm Design for edge thickness: 1 mm Hot melt adhesive specification for edge material max.: 3 mm Feed rate: approx. 10 m/min Maximum workpiece thickness: 60 mm EQUIPMENT Maintenance-free, coated glue basin with provision for interchangeable basins Glue dispensing device Pneumatic milling adjustment Combination design with interchangeable plate cutter Corner rounding milling cutter Radius drawing blade Surface drawing blade with pneumatic extraction device Cleaning station Robust chain drive Ball-bearing mounted double roller pressure pad Aggregate viewing window from the machine's rear and operator side Signal lamp for workpiece sequence Extendable workpiece support ACCESSORIES Hebrock 8 mm version Hebrock quick-change system for corner milling cutter Hebrock jointing up to 60 mm workpiece thickness Hebrock protective spray for edges Hebrock nesting (milling cutter + radius drawing blade) Hebrock Airtronic Note: Accessories are provided without guarantee. The principle applies: "Item purchased as seen." The prospective buyer must verify the completeness of the item on-site. Dodpfszb Idfox Agvjch
See details

Auction Conditions

The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.

  1. Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
  2. All prices and bids are net prices and do not include VAT.
  3. Stated dismantling and loading costs are binding.
  4. All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
  5. Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
  6. The duration of an auction may be subject to change.
  7. By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
  8. Submitted direct or maximum bids are binding.
  9. Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
  10. The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
  11. In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
  12. The General Auction Terms of Machineseeker Group GmbH apply.
Preview Trust Seal

Machineseeker Trust Seal

What is the trust seal?

Machineseeker certifies selected sellers with the Machineseeker trust seal. Before approval, a standardized and comprehensive check is carried out by experienced Machineseeker staff.

  • What do we verify?

    Trade licence>

    Check of
    trade licence or commercial register extract

    Postal address>

    Verification of the dealer's
    postal address

    Bank details>

    Validation of the
    banking details

    Availability>

    Verification of
    accessibility     to
    main phone number

    Credit report>

    Credit report
    may not contain negative criteria

    Customer complaints>

    Buyer complaints
    can lead to withdrawal of the seal

  • What does this mean for you as buyer?

    The Machineseeker trust seal enables you, as a buyer, to identify trustworthy sellers who are very likely to do honest and righteous business, without having to do your own investigation.

    Disagreements may of course still arise during the purchasing process. Machineseeker is not liable for any legal violations by buyers or sellers active on Machineseeker.