Used Renner Screw Compressor for sale (7,573)

Year of construction: 2018, condition: used, Screw compressor Manufacturer: Renner Type: RS132D Year of manufacture: 2018 Technical data Fgjdpozu Aibefx Akysh - Main drive motor: direct drive of the compressor stages via a shaft coupling - Oil filter / thermostat unit: regulates the cooling of the compressor oil and filters it - Oil-injected compressor stage: compressed air generation - Suction regulator: regulates the amount of air drawn in by the compressor - Control cabinet: controls and regulates the compressor system - Suction air filter: filters the air drawn in - Radial fans: generate cooling air for the oil and compressed air coolers - Compressed air outlet: connection point for an external compressed air network - Minimum pressure retaining valve: maintains a minimum system pressure for oil supply, separates network / system pressure - Fine oil separator with oil suction line, sight glasses, and check valve: oil separation via air-oil filter cartridges, return of separated oil from the compressed air - Safety valve: relieves pressure in case of overpressure - Oil filler plug with oil level monitoring: electronic oil level monitoring - Oil drain: drains the oil reservoir - Compressed air / oil combined cooler: cools the compressed air and the compressor oil - Control system: RENNERtronic - Integrated standby heater Compressor - Counterclockwise rotation (without gearbox) / Clockwise rotation (with gearbox) Suction regulator The suction regulator is mounted directly on the screw compressor. It regulates the volume flow of air drawn in by the screw compressor through the suction filter. Operating principle of the suction regulator: The suction regulator has only one main valve. This valve operates as a stepless control valve as well as a tightly closing shut-off valve. In full-load operation, the suction cross-section is fully open with minimal pressure drop. In part-load operation, the suction cross-section is automatically regulated by limiting the stroke and adjusted to the actual air requirement. When the system is stopped, this valve quickly and automatically closes the entire suction cross-section completely. The multiple functions of the regulator are initiated by only one control unit. Minimum pressure retaining valve The minimum pressure valve is located at the compressed air inlet of the air aftercooler. It performs two functions: 1) As a pressure retaining valve, it prevents the pressure from dropping below a minimum overpressure of 4.5 bar when there is no back pressure. This pressure is necessary to ensure the oil supply to the compressor. At the same time, this minimum overpressure is required for good oil separation. 2) As a check valve, it prevents the backflow of compressed air from the compressed air network or the pressure vessel into the compressor system. This allows the separator vessel to be completely relieved when the system is shut down. The valve operates automatically. Adjustment of the minimum pressure valve may only be carried out by personnel authorized by the manufacturer! Suction air filter The suction air filter is installed in the housing and connected to the suction regulator via a ventilation hose. The micro-dry filter with a fineness of 10 μm is used to filter the suction air. The filter can be cleaned several times before it needs to be replaced. Use only original replacement filters! Pressure transmitter The pressure transmitter, used in all systems with electronic control (RENNERtronic / -Plus), is connected to the compressed air outlet (network press

Condition: used, Year of construction: 2014, functionality: fully functional, Equipment: refrigerant dryer, Renner screw compressor RS-Top 7.5, including refrigerant dryer and compressed air tank We are offering a used Renner screw compressor RS-Top 7.5 for sale, including a refrigerant dryer, automatic condensate drain, and compressed air tank. Screw compressor Manufacturer: Renner Type: RS-Top 7.5 Delivery rate: 1,060 l/min Year of manufacture: 2014 Refrigerant dryer Manufacturer: Hankison Type: HHD101 Year of manufacture: 2022 Other components: Beko automatic condensate drain Schneider compressed air tank, 270 liters Fjdpfxez Irpns Akysgh If you are interested or have any questions, or if you would like more technical information, please do not hesitate to contact us.

Condition: excellent (used), High-quality RENNER industrial piston air compressor, manufactured in Germany, complete with 270 L air receiver and RENNER RKT+ 0035 refrigerated air dryer. Ideal for woodworking shops, CNC machines, automotive workshops and industrial applications requiring clean, dry compressed air. Specifications • Brand: RENNER Kompressoren • Year: 2019 • Air receiver: 270 Litres • Maximum pressure: 11 Bar • Motor: WEG W22 Premium IE3 • Motor power: 4 kW (5.5 HP) • Power supply: 380–400 V, 3 Phase • Integrated refrigerated air dryer: RENNER RKT+ 0035 • Made in Germany The RKT+ 0035 dryer provides compressed air drying with an airflow of up to 0.58 m³/min (35 m³/h) and is designed specifically for RENNER compressor installations. Condition • Complete unit. • Good working condition. • Ready for immediate use. • Inspection and testing are welcome. Fsdpfozmub Tsx Akyogh

Condition: like new (used), Year of construction: 2018, operating hours: 2 h, machine/vehicle number: RS18_5_ReAN19440656, pressure (max.): 15 bar, Showcase screw compressor RENNER RS 18.5 - 15 bar Year of manufacture: 2018 Operating hours: 2 operating hours Technical specifications Type: RS 18.5 Operating pressure: 15 bar(ue) Delivery volume at 15 bar, according to ISO 1217 Appendix C: 1.89 m³/min Fgjdpfx Ajv Rbvcokyoh Protection class/insulation class of drive motor: IP 55/ISO F Rated power of drive motor: 18.5 kW Operating voltage/frequency: 400/50 V/Hz Sound pressure level: 71 dB(A) Length: 1287 mm Width: 799 mm Height: 1296 mm Weight: 532 kg Compressed air connection: G 1 1/4" Visit our Retail store. We always have a large selection of new and used compressors in stock!

Condition: used, Year of construction: 1995, functionality: fully functional, Screw compressor Manufacturer: RENNER, Type: RS 11-10 Year of manufacture: 1995 Technical data Manufacturer: RENNER Type: RS 11-10 Year of manufacture: 1995 Delivery rate: 1500 l/min Fjdpfx Akoz A Tdceyjgh Max. operating pressure: 10 bar Motor power: 11 kW All information is subject to change without notice. A demonstration under power can be arranged at any time in our showroom.

Condition: excellent (used), Year of construction: 2012, volume flow: 1.06 m³/h, operating pressure: 10 bar, pressure: 10 bar, RENNER RS 7.5 kW screw compressor ROTORCOMP screw element 7.5 kW motor Capacity: 1.06 m3/min Pressure: 10 bar Year of manufacture: 2012 MACHINE IS FULLY OPERATIONAL. Fgjdpfx Asz Iri Uokyeh

Condition: good (used), Year of construction: 2012, operating hours: 30,006 h, functionality: fully functional, Screw compressor, manufactured by RENNER Type RS 11-10, year of manufacture 1995 Type RS-Top 15, year of manufacture 2012 Refrigerant dryer, year of manufacture 2022 Technical data for oil-injected screw compressor, type RS 11-10 Manufacturer: RENNER Type: RS 11-10 Year of manufacture: 1995 Delivery rate: 1500 l/min Max. operating pressure: 10 bar Motor power: 11 kW Technical data for oil-injected screw compressor, type RS-Top 15 Manufacturer: RENNER Type: RS-Top 15 Year of manufacture: 2012 Delivery rate: 1960 l/min Max. operating pressure: 10 bar Motor power: 15 kW Technical data for associated refrigerant dryer (compressed air dryer) Manufacturer: RENNER (produced by Friulair S.r.l.) Type: RKT CQ 0150 Refrigeration circuit: refrigerant Year of manufacture: 2022 Refrigerant: R134a Filling quantity: 0.25 kg Max. operating pressure: 14 bar Power: 0.40 kW Fuse rating: 10 A All information is subject to change without notice. Fgjdpfjz A Sypox Akyeh A demonstration under power is possible at any time in our showroom.

Condition: good (used), Screw cooling compressor ABB SVA 24, two units in complete Fjdpjyb Sdijfx Akyjgh YOM 1991 Made in Germany Good working condition

Condition: excellent (used), Year of construction: 2004, S016550 PROD. RENNER TYPE RSK37 S/N 8470 YEAR 2004 POWER (kW) 37 OUTPUT (m3/min) 6.15 PRESSURE (bar) 8 HOURS (RUNNING/TOTAL) 7166 / 25832 FREQUENCY CONVERTER no BUILT-IN DRYER yes EXCHANGER no COOLED (AIR/WATER) air ON TANK no Fgjdpfx Asz Elfdekyoh DOCUMENTS no CONNECTION 1' NEW/USED USED

Condition: repair required (used), Year of construction: 2018, operating hours: 34,881 h, functionality: limited functionality, power: 45 kW (61.18 HP), volume flow: 502.2 m³/h, pressure (max.): 8.5 bar, type of cooling: air, Equipment: type plate available, Screw compressor 45 kW 8.50 bar 8.37 m3/min Year of manufacture: 2018 Operating hours: 34,881 Fedpjz Iz Itjfx Akyogh Problem with the cooling system. The temperature is rising rapidly. The compressor is running.

Condition: used, Year of construction: 2016, operating hours: 14,279 h, machine/vehicle number: 644063, delivery quantity 4.61 m³/min at 10 bar delivery quantity 5.23 m³/min at 8 bar operating pressure 10 bar Fgedpfx Ajn Stanjkysh nominal power 30.0 KW operating hours 14,279 load hours 11,148 compressed air connection G1 1/4" sound level 69 dB(A) space requirements length - 1,400 x width - 830 x height - 1,640 mm weight approx. 850 kg

Condition: like new (used), Kaeser M30 PE screw compressor on a trailer The unit is in perfect condition, like new. The unit was purchased from a warehouse and has never been used. Only 50 hours of operation. Technical specifications: Operating pressure: 7 bar 18.2 kW motor Automatic start Fsdszz Hilepfx Akysgh Capacity: 3 m3/min Weight: 595 kg Year of manufacture: 2022/12

Year of construction: 1998, condition: excellent (used), RENNER RS 15 screw compressor Fsdpfx Aeh Eu A Nokysgh ROTORCOMP screw stage, 15KW motor, Capacity 1.92 m3 / min, Pressure 10 bar, THE MACHINE IS FULLY OPERATING. WE HAVE A LARGER NUMBER OF COMPRESSORS FOR SALE SCREWS, REFRIGERATION DRYERS AND EQUIPMENT WELDING. WE PROVIDE REPAIRS AND SERVICE.

Condition: used, Year of construction: 2013, operating hours: 33,213 h, functionality: fully functional, power: 25 kW (33.99 HP), pressure (max.): 8.5 bar, ambient temperature (min.): 3 °C, ambient temperature (max.): 45 °C, We are offering this used Kaeser ASD 47 SFC screw compressor, manufactured in 2013, for sale. Model: ASD 47 SFC Material Number: ASD.2 Serial Number: 3248 Year of Manufacture: 2013 Fgjdpfx Asz Dgatekyjh Rated Power: 25.0 kW Motor Speed: 2945 1/min Max. Operating Pressure: 8.5 bar Ambient Temperature: 3 °C / 45 °C Additionally, you can purchase 2 Kaeser compressed air filters in like-new condition, 1 Kaeser Aquamat CF 6 oil-water separator, and an OKS 900L air receiver. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: good (used), Year of construction: 2011, operating hours: 10,337 h, overall weight: 3,830 kg, ALMiG Gear 132 Compressor, Screw Compressor, 10 bar The screw compressors of the GEAR series are particularly suitable for very high compressed air requirements. The maintenance- and service-friendly drive concept of the GEAR compressors includes a robust drive motor with high power reserves. The highly efficient gearbox operates with minimal slippage, high operational reliability, and an efficiency of over 98%, resulting in almost lossless operation and thus protecting the drive. Furthermore, the highly efficient coolant separation enables a minimal residual oil content of only 2–3 mg/m³. The encapsulated design of the gearbox makes these systems ideal for use under the harshest operating conditions. Ideal for very high compressed air demands Robust drive unit with high power reserves Almost lossless concept with an efficiency of > 98% Maintenance- and service-friendly drive concept ALMiG Gear 132 Fodpfx Ajttv Ibjkyjgh Year of manufacture: 2011 Final pressure: 10 bar Motor power: 132 kW Volume flow: 18.04 m³/min Length: 2800 mm Width: 1400 mm Height: 2025 mm Weight: 3830 kg Operating hours: 10,337 h Load hours: 9,378 h Downtime: 13,887 h Total delivered volume: 11,333,000 m³ You can find more ALMiG compressors – new and used – in our shop! International shipping costs available upon request!

Condition: excellent (used), Year of construction: 2014, operating hours: 26,000 h, functionality: fully functional, overall weight: 1,603 kg, power: 55 kW (74.78 HP), 2014 Ingersoll Rand R55i Compressor 55kw screw compressor Full service history Approx 26k hours Fodpfx Aszrxhhjkyjgh Very good condition

Condition: good (used), Year of construction: 2010, operating hours: 7,637 h, overall weight: 1,970 kg, ALMiG Direct 75 screw compressor The DIRECT 37-315 series is designed for extremely economical operation in every kW class thanks to its unique design concept, making it suitable for a wide range of applications. These compressors with fixed speeds are particularly well suited as base load compressors. Separation system – highest compressed air quality through proven multi-stage separation Air Control P – the intelligence of the compressor; it thinks, monitors and documents. Thanks to the possible internet connection, there are practically no limits to communication. Drive system – highly efficient, reliable direct drive Compressors – powerful, excellent efficiency Cooling unit – large-surface coolers for the lowest compressed air outlet temperatures and optimal coolant temperatures System fan – powerful, efficient, high-performance Drive motor – robust, designed with power reserves ALMiG Direct 75 Year of manufacture: 2010 Final pressure: 11 bar Motor power: 75 kW Volume flow according to ISO 1217 (Appendix C-1996): 11.58 m³/min Length: 2300 mm Width: 1400 mm Height: 1860 mm Weight: 1970 kg Operating hours: 7637 h Load hours: 6317 h Idle time: 167714 h Total volume delivered: 4,506,000 m³ You can find more ALMiG compressors – new and used – in our shop! International shipping costs available on request! Fsdpfottucgex Akyjgh

Condition: used, Year of construction: 2016, functionality: fully functional, We are offering a used screw compressor for sale. KAESER screw compressor - SK22 Serial No.: 1558 Year of manufacture: 2016 Rated power: 11.0 kW Motor speed: 2,960 rpm Max. operating pressure: 8.0 bar Ambient temperature: 3 - 45°C Integrated or separate dryer Oil separator Control panel All available attachments Operating hours under load: Unit 1: approx. 2,500 hours Unit 2: approx. 1,000 hours Compressed air tank: 2,000 liters Tank design: hot-dip galvanized Price: €14,500.00 net Fodpfx Akez Iy Nioyogh €17,255.00 gross This is a used item. DESIGN Our sales team will gladly prepare a non-binding offer tailored to your requirements. TRANSPORT & INSTALLATION We will be happy to assist you with the transport and installation of the equipment. TERMS OF PAYMENT Terms of payment will be agreed upon in the event of an order. The price is quoted as a unit price/net price, or as stated in the product description (plus VAT). You will, of course, receive an invoice with VAT shown. ABOUT US DLK in Nordhorn trades in new and used products in the fields of warehouse logistics, conveying technology, storage platforms, textile storage, and machines for retail, industry, and trades. We continuously offer interesting used items from various manufacturers/brands at attractive prices. If you have any questions, please do not hesitate to contact us.

Condition: like new (used), Year of construction: 2013, Manufacturer: Kaeser Kompressoren, Germany YOM 2013 Maximum Pressure: Up to 13 Bar Productivity 8.26 cubic meters/min Energy Efficiency: The direct drive coupled with IE4 efficiency motors (or IE5 on SFC models) ensures superior energy efficiency. Low Maintenance: Components are designed for long service life, with easy access for maintenance. SIGMA Control 2: Ensures efficient monitoring and control of the compressor. Rotary compressor type Screw by lubrication Oil Noise level 70 dB Height 1900 mm Length 1110 mm Width 1760 mm Weight 1250 kg Electrical parameters Mains voltage 380~400 V Power consumption 45 W Current frequency 50 Hz User characteristics Compressor cooling system Water cooling is possible, with subsequent use of heat. Complete system ready to use fully automatic extremely effective sound insulation Fgjdpfxjyy U Shs Akyoh vibration insulation powder-coated housing parts for ambient temperatures up to +45°C easy maintenance: lubrication nipples for motor bearings are located on the outside (also for fan motor).

Condition: used, Year of construction: 2001, operating hours: 70,000 h, overall weight: 5,000 kg, power: 250 kW (339.91 HP), pressure (max.): 10 bar, type of cooling: water, Well-functioning oil-free compressor (also suitable for Spareparts Airend) Fedpfsxbdrdsx Akyjgh

Condition: excellent (used), Year of construction: 1997, operating hours: 88,000 h, functionality: fully functional, overall weight: 1,200 kg, motor manufacturer: kaeser, power: 75 kW (101.97 HP), fuel type: electric, volume flow: 690 m³/h, operating pressure: 10 bar, pressure (min.): 8 bar, pressure (max.): 10 bar, type of cooling: water, Equipment: documentation/manual, type plate available, KAESER CS121 Screw Compressor (75 kW, 10.3 m³/min, 10 bar) KAESER CS121 75 kW, 10 bar screw compressor for sale in excellent condition. Maintained and fully serviced since new. Last major service performed at the recorded operating hours. Manufacturer: Kaeser CS121 Year of manufacture: 1997 Sigma Control system Serial number: 1211178 Operating pressure: 10 bar Power: 75 kW Capacity: 11 m³/min (695 m³/h) Operating hours: Standby: 86,033 h / Loaded: 28,900 h Sigma Control system Motor speed: 1500 rpm Electrical power: 75 kW Fgodez A Iruopfx Akyoh Overall dimensions: Length 1960 x Width 1240 (+150) x Height 1440 mm Weight: 1200 kg

Condition: used, Year of construction: 2004, Technical details: pressure capacity: 10 bar volume capacity: 1,1 / 0,95 m³/min. rotary speed of motor: 8500 U/min Number of working hours: 29.498 h weight: ca. 310 kg dimensions L x W x H: Kompressor: 1,5 x 0,7 x 1,5 m dimensions L x W x H: Kälte Trockner: 0,45 x 0,45 x 0,5 m On a steel structure, welded, the feet are stabilized with rubber feet, stand: Compressor: -15 bar working pressure -speed max. 8.500 rpm. -Cooling air 980 m³/h Fjdpfoz Dudaex Akysgh -volume flow at 7.5 bar = 1.1 m³/min. and at 10 bar = 0.95 m³/min. Refrigeration compressed air dryer type 406AP: -volume flow 65 m³/h -Cooling air demand 450 m³/h -refrigerant R 134a -compressed air perm. min./max.: 2 / 16 bar -pressure perm. refrigerant min./max.: 15 / 50 bar -2x connections with 3/4" and 1/4" each Compressed air tank Renner: -Tank size Ø 500 x 1.350mm -operating pressure max. 11 bar -content for 250 liters -div. connections *

Condition: like new (used), Year of construction: 2022, operating hours: 20 h, functionality: fully functional, overall weight: 475 kg, total length: 1,890 mm, total width: 720 mm, total height: 1,600 mm, power: 15 kW (20.39 HP), fuel type: electric, volume flow: 110 m³/h, operating pressure: 10 bar, pressure (min.): 8 bar, pressure (max.): 13 bar, type of cooling: air, Equipment: refrigerant dryer, type plate available, Hertz HGS F 15 Compact (10 bar) screw compressor Delivery volume: 2.2 m³/min - Energy-efficient IE3 motor with star-delta configuration - 500-liter compressed air tank - AD2000 certificate - Integrated refrigerant dryer Fgedpfx Akjwum N Ieyjh - Pre- and post-filters - Condensate drain - Digital control system Logic 9 Upon request, the compressor can be delivered within a 200 km radius of our company headquarters (unloaded). Delivery costs upon agreement.

Condition: excellent (used), Year of construction: 2009, operating hours: 4,824 h, functionality: fully functional, power: 5.52 kW (7.51 HP), 1 x Atlas Copco Airpower B.V. rotary screw compressor and refrigerant air dryer mounted on 200L receiver tank. Fgodpfx Ajzu Aw Sokyoh Manufacturer - Atlas Copco Airpower B.V. Model - GX5 FF. Serial number - CAI361147. Date of manufacture - 2009. Working pressure - 10 bar. Working hours - 4824 hours. Electrical requirements: Compressor - 400 V / 50 hz / 3 phase. Air dryer - 230 V / 50 hz / 1 phase.

Condition: excellent (used), Year of construction: 2010, machine/vehicle number: API429763, overall weight: 490 kg, fuel type: electric, volume flow: 216 m³/h, pressure (max.): 13 bar, Atlas Copco GA18VSD screw compressor with variable speed drive for compressed air supply in workshops and industry. TECHNICAL DATA – AS PER NAMEPLATE Manufacturer: Atlas Copco Model: GA18VSD Year of manufacture: 2010 Motor power: 18.5 kW / 25 hp Maximum permissible operating pressure: 13 bar Volumetric flow rate Qv as per nameplate: 60 l/s / 3.6 m³/min Fjdpfx Akjz Hck Hjyogh Power connection: 400 V, 50 Hz, 3 phases Weight: 490 kg Serial number: API429763 EQUIPMENT AND CONDITION Frequency-controlled drive (VSD) and sound-dampening enclosure. Technical and visual condition according to available information: very good. Maintenance and service history available; last reported service: 24.01.2025. Current operating hours are not available. An integrated refrigeration dryer is not confirmed and is not offered as a guaranteed component. LOCATION AND INSPECTION 65618 Selters, Germany. Inspection and collection by arrangement. Coordinate the scope and procedure of loading before collection. Price: EUR 5,750 net, negotiable, plus statutory VAT. Reference: RQ449789FA