3 kW screwcompressor dryer tank

Renner RSDK-B 3,0 - 10 bar

Condition: new, OPTIMUM OPTIsaw S275N metal band saw - Exhibition machine - Ltodpfx Afeu R S Hpsfsa Feed infinitely adjustable, tiltable ----- Technical data ----- Swivel range: 0 - 60 °, Cutting height: 150 mm, cutting depth: 230 mm, Saw blade speed: 45 / 90 m/min, Saw blade length: 2,480 mm, Motor 400 V: 1.1 kW, Dimensions (LxWxH): 1,400 x 530 x 1,360 mm, Weight: 185 kg - new exhibition machine -

Condition: new, bore capacity in steel (diameter) 40 mm throat 275 mm bore stroke 120 mm spindle taper MK 4 turning speed range 75 - 3200 U/min 190 mm 490 mm table surface area 730 x 210 mm Ljdjupw T Dopfx Affota connected load frequency 400 V boring feeds: 0,1 - 0,18 - 0,26 mm/U total power requirement 1,1/1,5 kW weight of the machine ca. 0,35 t dimensions of the machine ca. 0,8 x 0,75 x 1,85 m Drilling and milling machine - Cross Support - Cabinet - Swivel spindle head left / right 90 ° - Feed via hand crank

Condition: like new (used), Equipment: type plate available, Used stainless steel agitator tank on stainless steel pallet with rollers and propeller agitator Type: SBPA1000RWP Ljdpfev Ha Uiox Affeta Article number: 10862 Volume: 907L Type: Upright design on stainless steel transport pallet with rollers Design: Single-walled, at least 2mm wall thickness Material (in contact with media): 1.4301 stainless steel Surface: Satin finish on the outside, BA (IIId) on the inside Inside weld seams: Pickled, passivated and brushed Operating pressure: Atmospheric Top: Central crossbeam with two hinged lid halves Bottom: Dished bottom with discharge bead Container dimensions: Container diameter: 1080mm Total height: 1915mm Total width: 1200 x 1150mm Distance from drain to floor: 400mm Height of feet: 240mm Equipment: 1x hinged lid, central crossbar with two hinged lid halves, stainless steel sheet metal grates below the hinged lid as protection against intrusion (removable), locking function (lids can be locked open) 1x reserve nozzle DN50 DIN11851 on the top floor 1x DN50 DIN32676-A Tri-Clamp ball valve as outlet fitting, PTFE seal 1x stainless steel transport pallet 4x swivel castors, 2x with brake 1x nameplate Agitator: Propeller agitator Suitable for viscosities up to 500mPas Make: Schwarzer Rührtechnik GmbH Type: SRT8-1500 Power: 0.75KW Speed: 1410 UPM Operating voltage: 3PH 400V -Solid agitator shaft attached to the agitator motor, not removable -Agitator shaft balanced for concentricity in Speed range -1 mixing propeller Ø 150mm screwed into the end of the agitator shaft. Mixing propeller made of cast stainless steel, highly polished -4x neoprene rubber metal buffers, motor mounted in a swinging manner, hardness grade 70 according to Shore, neoprene resistant up to 100°C Agitator control: CEE plug switch on the container, on/off switch, emergency stop, zero voltage release and phase inverter Continuous speed control of the agitator motor using a compact, external frequency converter, Optidrive brand. With digital display of the frequency or speed. Incl. potentiometer, on/off switch. Pre-programmed for agitator operation. Operating voltage 3PH 400V Mounted on the container on a stainless steel holder.

Condition: new, range L-W-H 780 x 480 x 1050 mm weight 79,5 kg 6 St. The tool trolley is equipped with 6 storage drawers. The tool trolley is equipped with 2 normal and 2 swivel wheels, one of them with a brake. The tool trolley is fully lockable thanks to an integrated lock. Drawers can be locked per drawer. All drawers are equipped with a quick release and a cushioning fitted. Height-adjustable storage compartment behind the door. Ltodpfxeu Imk Ro Affea Central locking with 2 keys. Tool trolley is equipped with 155 pieces of tool parts: 3 pcs. Socket sets: 1/4 ", 3/8", 1/2 ". Ratchet ring spanner set from 6 - 22mm, Extension for socket sets, different allen keys from 1 - 10mm, Various screwdriver sets. Pliers assortment.

Condition: new, welding current 15 - 40 A cutting capacity 1 - 16 mm open-circuit voltage 96 V Required air-pressure min. 4 bar connected load 3,6 kW connected load frequency 230 V weight 9,0 kg Dimensions (LxWxH) 371 x 153 x 232 mm Exhibition machine !! Inverter plasma cutter with accessories: Ltodpfxoupxfhe Affsa Cutting torch with 4 m cable, earthing clamp with 2.5 m cable, air pressure gauge, Mask and brush.

Condition: new, capacity 90 degrees: round 125 mm capacity 90 degrees: square 125 mm Ljdpfx Ajupw R Nsffeta 127 x 125 mm dimensions of saw-band 1435 x 12,7 x 0,65 mm band speed 38 - 80 m/min total power requirement 0,95 kW weight of the machine ca. 18 kg dimensions 720 x 380 x 450 m Both straight and miter cuts can be made at angles between 45 and 90 degrees. With the metal band saw you not only work precisely, but also quickly: the band speed can be variably adjusted between 38 and 80 meters per minute. With a weight of only 25 kilograms, the saw can be used mobile.

Condition: like new (used), Year of construction: 2019, Equipment: refrigerant dryer, Kaeser SM 13 Screw Compressor Manufacturer: Kaeser Model: SM 13 Ltjdpfx Aoxt Rhpeffea Year of manufacture: 2019 Max. operating pressure: 11.0 bar Rated power: 7.5 kW Includes TB 26 Refrigeration Dryer Year of manufacture: 2019

Condition: new, bore capacity in steel (diameter) 30 mm throat 250 mm bore stroke 130 mm spindle taper MT 3 MK table: 380 x 380 mm column diameter 98 mm Ltedsu Imc Hepfx Affea turning speeds 75 - 3200 U/min feeds mm/U total power requirement 1,1 kW weight of the machine ca. 220 kg. range L-W-H 0,5 x 0,6 x 2,05 mm Gear drill Thread cutting device Left/right barrel Tilting work table. Lighting. 2 electric Speed levels. Depth stop. Gears run in oil. Packaging dimensions: 2100x400x710mm Weight 260kg

Condition: used, Year of construction: 2005, cutting diameter 178 mm saw band length 2265 mm cutting width 225 mm Ledpfxjrzwwre Affsta dimensions of saw-band 2265 x 20 x 0,9 mm band speed 30 / 60 m/min capacity 90 degrees: round 178 mm capacity 90 degrees: flat 225 x 110 mm capacity 45 degrees: round 140 mm capacity 60 degrees: round 85 mm total connected load 0,75 kW weight of the machine ca. 165 kg dimensions of the machine ca. 1100 x 700 x 1650 mm Furnishing: - Coolant device - band saw blades

Year of construction: 2021, condition: new, Sell here a workshop crane. The crane is new and unused. Workshop crane Premium 2051510WKG10 Ltedpohygn Iofx Affsa Construction type spread max. load capacity in position A1 = 1.000kg stroke per pumping movement with and without load = 6/20 mm Weight 130kg