Four-sided planer QCM MBQ418E

QCM MBQ418E

Condition: good (used), Year of construction: 1996, Weinig Unimat 23 four-side planer - German production - grooved top - year of production 1996 - pulling rollers in the table top TECHNICAL PARAMETERS: planed width 230 mm planing height 160 mm grooved top spindle diameter 40 mm 1 lower spindle 7.5 kW 2 right spindle 7.5 kW 3 left spindle 7.5 kW 4 upper spindle 11 kW 5 lower spindle 7.5 kW feed smoothly adjustable 6-36 m / min 5.5 kW feed motor power six top steel pulling rollers two upper rubber pulling rollers three pullers in the table top pneumatic feed pressure pneumatic shoe clamp Bjdpfx Aash Dwl Djfocu spindles with brakes pre-table length 1970 mm electric height adjustment central lubrication (split) diameter of nozzles 140 mm dimensions of the machine (length / width / height) 410/200/180 cm weight ~ 3000 kg

Condition: new, Year of construction: 2024, functionality: fully functional, overall weight: 3,450 kg, fuel type: diesel, tank capacity: 500 l, color: white, output current: 360 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 270 kW (367.10 HP), continuous power: 250 kW (339.91 HP), total length: 3,650 mm, total width: 1,300 mm, total height: 1,850 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Ricardo, Cummins, type of cooling: water, type of input current: three-phase, Three-phase stationary generator Proton ZPP 250 (250kW - 270kW) in a compact housing resistant to precipitation and additionally soundproofed. The aggregate has an external automatic reserve switching system SZR (Autostart) and many other functions as specified later in the description. - Model - Proton ZPP 250R SZR - Maximum power - 270 kW / 300 kVA - Rated power - 250 kW / 340 kVA - Prepared for operation - Yes (Flooded with fluids, test run) - Type - Industrial genset - Condition of the aggregate - Factory new - Manufacturer - Proton - Generator type - Three-phase - VAT invoice 23% - Year of production - 2024 - Warranty - 36 months ⊳ ENGINE: Engine model - 6D10D315A-Turbo (British Series). Fuel Type - Diesel (Diesel) Combustion: - 47.0 liters per hour (at 75% of maximum power) - 34.0 liters per hour (at 50% of maximum power) Engine configuration - In-line (R4) Displacement - 9700 cc3 Direct injection Lubrication method - Forced, engine with oil pump ⊳POWER: 100% Copper AVR voltage stabilizer - Yes Alternator model - Proton 444D Rated power 400V - 250000 watts (250kW / 300kVA) 400V maximum power (up to 15 minutes) - 270000 Watt (270kW / 2340kVA) Rated 230V power - 83000 watts 230V maximum power (up to 15 minutes) - 90000 Watt Rated current (400V) - 360.0 A Current protection - C16, C32, main protection - 400A Frequency - 50 Hz Generator construction - Synchronous ⊳ ENCLOSURE: Silenced enclosure Precipitation resistant housing Bodpfxstp Tfwe Aafocu Three-phase and single-phase sockets Fuel tank capacity - 500 liters Operating time on full tank (Average) - 20 hours Transport kit - Holes for forks and HDS transport hooks Dimensions 130 x 365 x 185 cm Gross weight - 3450 kg ⊳ FEATURES: Voltage stabilizer (AVR) - Stamford SX460 (2%) - electronic voltage stabilization with variable load - electronic frequency stabilization Automatic operation of the genset SZR (Self-actuated reserve switching) Thermal overload protection Sensor for oil pressure, oil level, coolant level Glow plugs Oil sump heating Heating of the cooling liquid Battery - 2 pieces 140Ah Automatic charger ⊳ CONTROLLER: Controller model - Comap InteliLite 4 AMF 20 Hour meter Ammeter Voltmeter Built-in PLC logic and PLC editor Overload protection CAN module extensions Integration with SCADA system Additional outputs - for 4G, Ethernet, RS232/485 connections GPRS remote control and monitoring - Optional Modbus, Ethernet communication - Optional Why us? We are a company specializing exclusively in generators, for more than 17 years we have been operating in this industry constantly striving to make sure that our products represent the highest quality and are as reliable as possible. During this time we have provided solutions to more than 10,000 customers in Poland even in its remotest corners. We select suppliers of components for our units meticulously, making sure that they are leaders in their industries. We have a wide range of gensets from 6 to 300kW on a variety of engines including English Ricardo, American Cummins or German Deutz and in various configurations made specifically for customer requirements.

Year of construction: 1990, condition: reconditioned (used), 4-sided planer unimat U23, 7 heads 4-sided Weinig 7-head planer, 7 universal arrangement: horizontal, lower vertical, right, left, vertical, right, vertical, upper horizontal, lower horizontal, and the last universal. The drive is realized by means of cardans. The drive is secured with Rotax clutches. Pressure of the element using pneumatics. Feed smoothly regulated by an inverter. Machine feed 0-42 m/min. 2.5 kW and 7.5 kW engines. Grinding table and a new one. Additionally, new wiring and new electrics. The machine has been completely renovated. Warranty . Bedpfjpqxnxox Aafscu

Condition: used, Weinig brand moulder, model PFA17N, grooved table, 8 shafts (lower 4kw, right 4kw, left 5.5kw, right 4kw, upper 5kw, lower 4kw, universal 4kw, universal 4kw), used. Bcedpok N I I Njfx Aafsu

Condition: used, Year of construction: 2021, Number of spindles 5 St. Working width 250 mm Working height 160 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 6-24 m/min. control K2 Basic 7"-Touch KUPER SWT XL-5 AUTOMATIC PLANER AND MOULDER ----- LIKE NEW, showroom machine ! - 5 spindles: bottom, right, left, top, bottom - Speed: frequency-controlled 4,000 - 6,000 rpm, spindle 4.5 to 8,000 rpm - Width and height motor-controlled: left spindle radial upper spindle axial - Feed carrier motor-controlled - Additional motor-controlled positioning: right spindle radial and axial left spindle axial - working width 250 mm TECHNICAL DATA ----- Working width (perimeter of tools 163 mm) 15 - 230 mm Working height(perimeter of tools 163 mm) 10 - 150 mm (perimeter of tools 123 mm) 10 - 160 mm Min. workpiece length: single piece: min. 800 mm piece by piece: min. 300 mm The processing of the work pieces is depending on the following operating parameters: material, wood moisture, tools, diameter of the chip removal and feed speed. If necessary adjustments to the operating parameter have to be done. SPINDLE CONFIGURATION ----- bottom, right, left, top, bottom 1st spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Spindle length 250 mm Bjdpfx Aaswgwmnofecu Usabale length for tools Spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 125 - 160 mm Reference cutter Diameter difference 20 - 25mm to the cutterhead Connecting piece D = 125 mm Quick action lock nut Pro-Lock 2nd spindle: VERTICAL, RIGHT ----- Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Spindle length 165 mm Usable length for tools spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Adjustment path axial 60 mm Adjustable table plate to tool radius Standard profile depth 20 mm Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock 3rd spindle: VERTICAL, LEFT ----- Siemens IE3 motor with inverter brake 7,5 kW (10 HP) Diameter 40 mm Spindle length 165 mm Usable length for tools spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Adjustment path axial 60 mm Standard profile depth 20 mm Adjustable table plate to tool radius Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock 4th spindle: HORIZONTAL, TOP ----- Siemens IE3 motor with inverter brake 7,5 kW (10 HP) Diameter 40 mm Spindle length 235 mm Usable length for tools spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Pressure shoe pneumatically, via linear guides dynamically adjustable Standard profile depth 20 mm Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock 5th spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Spindle length 235 mm Usable length for tools spindle lenght minus approx. 6 mm Drive, frequency-controlled...

Condition: good (used), Year of construction: 1978, WACO HM200 UNIVERSAL, Planer-Moulder 10 spindle machine Year 9/1979 S/N 31469.708 Hydraulic feeded powerful spindle moulder. Feeding speed 0-50m/ min counter bearings on all horizontal spindles. 1. / 5. / 8./10. spindles equipped with jointer Infeeding table 200 cm Technical describtion: working capacity 200x100mm (width x hight) Spindle configuration: 1. Spindle Bottom 7,5Kw (10Hp) 2. Spindle Right 7,5kw (10HP) 3. Spindle Left kw (15HP) 4. Spindle Top, 7,5kW 5. Spindle Top, 7,5 kW 6. Spindle Right 7,5kw (10HP) 7. Spindle Left kw (15HP) 8. Spindle Top, 7,5 kW 9. Spindel Bottom, 7,5 kW 10.Spindle Bottom 10 kW Bottom spindle max tool diameter 160mm, work length 210mm Side spindles (right / left) max tool diameter 200mm, work length 110mm Top spindles max tool diameter 225mm, work length 210mm Spindle diameter 45mm Pneumatic pressure rolls ?? L x W x H = Weight 10 t Bsdpfxoiz Tzxe Aafscu

Year of construction: 1995, condition: ready for operation (used), For sell we have whole line. System TM Bison loading machine Weinig Hydromat H 22 B year 1989 Bjdpfx Aajtqdfisfjcu System TM Angus unloading 450 - 2500mm lenght 20 - 80 mm height 45 - 160 mm width

Condition: used, Year of construction: 1978, functionality: unexamined, Chain width 300 mm Maximum saw bushing clamping width 300 mm Maximum cutting height 100 mm Saw motor 18.5 kW Feed motor 1.1 kW Feed speed 6 – 48 m/min. Weight approx. 1800 kg Bodpfx Aaowmwmhefjcu With reversing device for one-person operation.

Condition: like new (used), chain width: 210 mm, Transport chain Width 210 mm 59 links Bcsdpjqwdvgefx Aafou Interholz RAIMANN Freiburg

Condition: like new (used), functionality: fully functional, planing height: 190 mm, spindle diameter: 50 mm, planing width: 250 mm, overall weight: 10,000 kg, Weinig Hydromat H25N four-sided planer with 100 m/min feeder - German production Bcedpjn Slk Uefx Aafeu - hydraulic feed up to 100 m/min - for wet wood - serving table TECHNICAL PARAMETERS: planing width 250 mm planing height 190 mm spindle diameter 50 mm electric height adjustment 1 lower spindle 15 kW 2 right spindle 7.5 kW 3 left spindle 15 kW 4 right spindle 7.5 kW 5 upper spindle 7.5 kW 6 upper spindle 15 kW 7 lower spindle 7.5 kW 8 universal spindle 1800 7.5 kW feed smoothly adjustable up to 100 m/min feed pump motor power 22 kW nine rollers in the table top, three of which are in front of the first head seven upper steel pulling rollers four upper rubber pulling rollers pneumatic pressure jointer on 1-6-7 spindle automatic lubrication of the countertop feeding table 3000 mm speed smoothly adjustable up to 100 m/min two upper pneumatic rollers six lower pulling rollers minimum material length 650 mm Transport dimensions 11000x2400x2000 mm weight 9 tons