Thickness planer

Paoloni S 515

Condition: excellent (used), SICAR Forte 400 thicknesser Working width 400mm Planing height 300mm Nsdpfx Ajt Rp Hxjg Iolh Shaft with conventional knives Shaft with 4 knives Shaft speed 5200r.p.m Electric lifting and lowering of the work surface Main motor 3kw 3 feed speeds CE certificate

Condition: refurbished (used), Year of construction: 1975, functionality: fully functional, CANALI Vertical Automatic High-Performance Block Bandsaw Model BBS.V "PACIFIC" K/L-B-P 1800, Type 555, Year of Manufacture 1975 with control panel in the cabin, bandsaw wheels Ø 1800 mm, bandsaw wheel width 280 mm, max. saw blade width 310 mm, bandsaw blade length 11,500 mm bandsaw size 11495x310x1.85x55 log infeed system approx. 20 m long, four-strand system with inserter block carriage with ejector onto block cross conveyor CANALI pneumatic clamping carriage, Type 501.09 with 4 clamping jaws, 3 log turners, 4 ejectors, Nsdpfxjxvrnij Ag Islh drive power 100 kW, carriage speed 5-120 m/min. powered roller conveyor with slab removal with brush, lifting device with puller for trimming complete electrical switchgear cabinets complete sharpening room equipment for bandsaw blades

Condition: reconditioned (used), Grinding table dimensions: 2500 x 800 mm Grinding belt dimensions: 6800 x 150 mm Motor power approx. 3.0 kW Mechanical table height adjustment Right-left rotation 2 grinding belt speeds Grinding belt cover on top Nlsdpfxsv D H Sie Ag Ish CE Incl. special grinding shoe Note on used machines: • Errors in technical information and prior sale reserved. • Prices quoted are pick-up prices from location - free loading! • The machines have been cleaned and function-tested. • All machines are purchased as seen without any claim to warranty. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. (We will only answer inquiries if you provide your address + telephone number!)

Condition: used, Year of construction: 1977, Wurster and Dietz GDZ 600 GES Year of construction 1977 Passage: 71 cm stroke: 600 mm with swing frame with water-cooled guides with hydraulic saw clamp Jansen with riving knife with saw blades with templates with fence immediately available Location: Austria, near Klagenfurt Nlsdpfxeqpdi Uj Ag Ish

Condition: excellent (used), Stainless steel version, Nlodpfx Agohvyzwe Ioh Length: 1400mm Width: 1200mm Height: 1900mm Weight: about 250kg

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, Paint/spray booth Nsdpfx Aeia Taujg Islh dimensions without fan and control Panel! Extraction surface - dimensions (mm): 3000(w)x1900(h) Overall dimension(mm): 3100(w)x2350(h)x1910(d) Technical data: - Fan power 3kW (ATEX) - Fan suction capacity: 16000 m³/h (max 1100Pa) - Lighting: 2 pcs 2x36W (ATEX) - Connection voltage: 400V - Frequency converter for smooth regulation of the fan - Three-stage air filtration - Intended for explosive environments - EX - Complete technical documentation - CE Documentation - Warranty Possibility to order machines in various individual configurations and dimensions! Do not hesitate to contact us.

Condition: new, Main features of the machine: Thicknesser TH 630 is a simple, solid construction intended for everyday work in the workshop, with a planer shaft width of 630 mm. It is characterized by a large massive ribbed cast iron table, which eliminates any vibrations during operation. The machine has an extremely powerful motor that drives the cutter heads (notched knives), which make the process of planing the most difficult wooden elements an easy task. Each knife is easy to replace if worn or damaged. Moving the table up and down is automatic after entering the appropriate dimensions. The sum of these many advantages gives the possibility of very precise machining settings. Advantages: Worktable mounted on 4 bolts Controller for automatic table height adjustment Planer shaft by 120, 4 knives The possibility of cutting large dimensions Technical data: Nedpfx Agogpg E Sj Ijlh Max planing width: 630 mm Max planing height: 300 mm Min length of the planed element: 280 mm Knife shaft diameter: 120 mm 2 rolls in the table top Number of knives: 4 The dimensions of the knives: 630x30x3 mm Power supply: 400V Total power: 7.5 kW Smooth feed speed: from 4-20 mm / min Electric Lifting Extraction port: 150 mm Weight: 890 kg Table dimensions: 1050x630 mm Milling block speed: 5500 rpm The machine is available immediately! Machine dimensions Length: 1060 mm Width: 1060 mm Height: 1160 mm

Condition: used, SCM S 630 Heavy-duty thickness planer – for carpentry and timber framing Planing width 630 mm Planing height 300 mm 4-knife safety cutterhead with automatic brake / indicator light Segmented pressure beam – aluminum Grooved steel roller at the infeed Rubber rollers at the outfeed Undertable rollers 7.5 kW main motor Nledpfx Aoz Ay Ttsg Ioh Electronic thickness table adjustment – digital/LED Infinitely variable feed rate 6-20 m/min Machine from a vocational training workshop in TOP condition Available from stock in Lieboch

Condition: used, Frame Saw Esterer LSH Nljdpfxsw Dn S Aj Ag Ieh Year of Manufacture: 1968 Clearance: 65 cm 500 mm stroke Oscillating frame Automatic overhang adjustment Hydraulic roller lifting With splitter wedge With drive motor With gear transmission With saw blades With hydraulic saw tensioner With suspension system With templates With log carriage Weiss HdT-L, Year 1996 (can also be sold separately) The machine has been out of operation for quite some time and should be thoroughly checked and overhauled. Location: Austria, near 8700 Leoben

Condition: new, Year of construction: 2026, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, grinding belt width: 150 mm, grinding belt length: 7,000 mm, height adjustment type: electric, total height: 2,200 mm, total length: 3,550 mm, total width: 2,000 mm, overall weight: 870 kg, grinding length: 1,500 mm, workpiece weight (max.): 80 kg, extraction connection diameter: 180 mm, grinding width: 950 mm, rotational speed (max.): 1,435 rpm, space requirement height: 2,200 mm, space requirement length: 3,550 mm, space requirement width: 2,000 mm, table height adjustment: 500 mm, Equipment: documentation/manual, Long-belt sanding machine MS92-150 3-cornered sanding belt 150x7100 for manual sanding, matting and polishing. For processing steel, stainless steel and brass. The scope of delivery includes - Machine stand with connecting elements - Infinitely variable belt drive - Pneumatic belt tensioning and manual belt tracking regulation - Sanding unit with contact roller - Electric table lift - Flat machine table - Workpiece stop ruler on the machine table - Original equipment sanding belt - Operating instructions + manufacturer's declaration Nlodstwb U Aepfx Ag Ioh - CE version The stable machine frame in welded steel construction results in very smooth machine operation. The two machine stands are equipped with an offset so that longer parts than the machine table can be sanded. The sanding belt guide via 3 belt deflection rollers results in the largest possible open working area for the operator and therefore good working conditions, especially with hand sanding blocks. The belt is driven by a three-phase motor with a balanced belt drive roller. The belt has adjustable pneumatic belt tension. The dust collection device is dimensioned so that the sanding dust is collected and directed to the extraction nozzle when connected to an appropriate extraction system. The sanding unit is mounted on backlash-free roller guides to ensure effortless operation. The machine table can be easily and quickly adjusted to the correct workpiece height using the electromotive table lift. The table lift guide elements are maintenance-free. For loading, the table can be extended so far that workpieces do not have to be pushed under the sanding belt when loading. The electrical controls for the main functions are arranged in the middle of the machine for ease of use. Machine color: RAL 9001 cream white and RAL 5003 sapphire blue Switch cabinets and small housing in " light gray " The machine is supplied as standard with an original equipment belt (W x L) 150 x 7100 mm and a contact roller approx. 50° Shore for 150 mm belt width. Additional accessories: 3-axis table with integrated handling device for turning and swiveling the workpieces. The handling device is mounted in the center of the table under the insertion frame. To work with the handling device, the insertion frame is removed from the machine table. The handling device is equipped with four vacuum suction cups to hold the workpieces and consists of: The bearing with the rotary axis, on which a brake disk is mounted at the rear. The swivel device is attached to the front of the rotary axis. This can be locked at 0°, 22.5°, 45°, 67.5° and 90°. An additional locking disk is attached to the swivel head, which is used for fine adjustment of the workpieces to the sanding belt. The rotary and swivel axes are unlocked pneumatically using a foot switch, while the rotary axes are moved manually. Workpiece weight when used as a flat table with the insert frame in place = 80 daN Workpiece weight when using the handling device in relation to the clamping plate = 25 daN or 120 Nm in relation to the center of the rotary axis.