Cardboard Cutters

PACKSIZE-EMSIZE EM6

Condition: as good as new (ex-display), FULL LINE of Double-side Sizing-Milling & Edge Banding. Composed of the following machines: VZ0200A) Gantry-portal Loader (Double pick-up station) "BARGSTEDT" Mod. TBH 500/D/30/12 Lrsdodt Rgvspfx Ahvoi VZ0200B) 1st Double-side Sizing & Edge Bander "HOMAG" Mod. KFL 525/8/A3/15 VZ0200C) In-feeding Rollerway "HOMAG" Mod. TDL 310/30/12 with 90° Turning device (from lenghtwise to crosswise) with double cone system VZ0200D) 2nd Double-side Sizing & Edge Bander "HOMAG" Mod. KFL 526/10/A3/30 VZ0200E) In-feeding Rollerway "HOMAG" Mod. TDL 510/25/12 with 90° Turning device (from crosswise to lenghtwise) with double cone system VZ0200F) Cleaning machine "WANDRES" VZ0200G) Gantry-portal Stacker (Double pick-up station) "BARGSTEDT" Mod. TSP 410/D/25/12

Condition: used, Year of construction: 2003, functionality: limited functionality, machine/vehicle number: 0 278 06 1192, film width: 700 mm, roll diameter: 700 mm, Used Friz rotary cutter. 1 set of blades has been resharpened. The machine is used and is sold without warranty. Lrodev Radxjpfx Ahvoi Inspection is possible and welcome. Loading facilities available.

Condition: new, Year of construction: 2025, Gannomat Concept 70 Eco Lamella - carcass press with rapid traverse Technical data: Lamella carcass press from our showroom; Working range: width from 150 - 2.500mm , height from 150 - 1.400mm; depth 700mm; - lamella press beam top with 6 elements, lamella press beam side with 5 elements - lamella press beam with practice-proven tolerance compensation for tightly pressed carcass joints - Counterpressure surfaces are 40 mm thick, coated continuous support plates - The pressing force of the pressing bars is infinitely variable electronically controlled by 2 potentiometers and adjusted via frequency converter, therefore the torque transmission is absolutely wear-free. - Pressing force for horizontal press bars min. 500 daN (kg) to infinitely variable max. 2200 daN (kg) - Pressing force for vertical press bars min. 300 daN (kg) to stepless max. 2200 daN (kg) - Including option: Rapid traverse speed for fast positioning of the press bars, controlled by automatic workpiece recognition with sensors in the press bars, press speed 5/10/25 mm/sec. and rapid traverse speed 50 mm/sec, the sensors can be switched off for pressing special parts. - Jog mode for precise positioning of the two pressing beams e.g. for low pressing forces, drawers and carcasses 45 degrees. Simple operation via 6 separate pushbuttons, freely adjustable pressing time preselection with automatic opening, loading height 300 mm. Machine is in our showroom and can be delivered immediately. Location: ex stock 54634 Bitburg - immediately available - Lrjdpjiidm Nefx Ahvsi

Condition: excellent (used), Year of construction: 2019, Kolbus AutoBox AB year 2019 machine for box production easy operation servo controlled quick job change suitable for corrugated boxes enables box-on-demand production MC MultiCut Module PR module many box types (FEFCO) scoring, cross and linear cutting, slitting Lrsdpfx Ajx El N Ijhvoi incl. several equipment (glue, new knives) delivery section ready for use good condition available immediately

Condition: excellent (used), Year of construction: 2002, Maximum jumbo roll width 1300 mm Jumbo roll diameter max 1000 mm (1200 mm without splice table) Winding diameter max 600 mm Operating speed 300 m/min Cutting width possible from 20 mm Year of manufacture 2002 Accessories: - 1 unwind tension shaft D 76 mm - 2 friction winding shafts D 76 mm Ljdpfx Ahoxyihnevori - 10 upper and lower knives - 1 edge guiding system - 1 cutting table - 1 extraction system for edge trims - silicone-coated guide rollers, suitable for adhesive tapes - with documentation

Condition: ready for operation (used), Year of construction: 1994, A bag making machine (packaging machine for industrial bags) Seydel is available. Working width: 1020mm, wrapping closure: one-sided/both-sided. Including cardboard flange feeder and deposit table with counter and advance. On-site inspection is possible. Lredpfx Ajvtqq Iohvoi

Condition: used, Year of construction: 2006, Year of manufacture: 2006 Condition: Very good condition Lredpfxsww H S Us Ahvoi Carton gluing machine suitable for producing: - Standard cartons with 1-3 gluing points from folding boxboard - Clamshell cartons with double fold - Mailing envelopes Materials used: - Folding boxboard 200-600 g/m² - E-flute corrugated board Configuration for standard cartons: - Timing feeder for folding heavy carton types (1 vibrator, 2 air blowers) - Power bridging shaft between feeder and pre-folding station - 3 intake rollers incl. mounting above the bridging station, for very wide products - Digital indicators for faster machine setup - Pre-folding station - Bottom gluing unit incl. applicator wheel (left side) - Folding station - Transfer station - Collection and pressing station - Electronic counter - Pneumatic marking device (compressed air required) - Speed: 400 m/min - Video camera for monitoring the transfer station (camera + monitor at the feeder) - Additional device for producing auto-bottom cartons - 1 device for auto-bottom cartons - 1 soft rubber belt including guide parts and holders - 1 device for pre-breaking the third crease for auto-bottom cartons Additional equipment for other folding methods: - 1 device for folding clamshell cartons with double fold - 1 device for folding sleeves (CD sleeves) 120–380 mm Gluing unit: - 1 HHS gluing unit with holders for dispersion glue application from above - 2 application nozzles for top gluing - 4 controlled channels - 2 light barriers - 1 gluing station - 1 fill level sensor

Year of construction: 2022, condition: used, Technical data: Maximum parent roll width: 1420 mm Minimum parent roll width: 600 mm Maximum parent roll diameter: 1500 mm Maximum parent roll weight: 2500 kg Maximum unwinding tension (Ø1500 mm): 600 N Minimum unwinding tension (Ø1000 mm): 40 N Minimum standard slitting width: 100 mm Maximum rewinding width: 1400 mm Maximum rewinding diameter: 1050 mm Maximum rewinding weight: • Ø76 mm shaft: 600 kg • Ø152 mm shaft: 1000 kg Maximum rewinding tension: 600 N Maximum production speed: 600 m/min Power supply: 3 x 400V 50Hz Installed power: 30 kW Compressed air: 6 bar, dry Compressed air: 5–40°C Noise level: 82 dB(A) Color: Grey RAL 7035 Materials to be slit: • Paper-/liner-based packaging laminates. • Board from 80 to 300 g/m². Unwind section: A separate between-centers unwinder, type T9, 1500 mm diameter, including: • Hydraulic cylinder for lifting parent rolls from the floor. • Two motors driving the unwind roll, controlled by an ultrasonic diameter sensor and a tension-control dancer roller. • Two pneumatic expanding adapters, SVECOM, for 70/76 mm (3") cores. • Two pneumatic expanding adapters, SVECOM, for 150/152 mm (6") cores (mounted on the pneumatic end adapters). • Floating edge-correction roller. • Automatic web guiding system, FIFE DP20, with SE26A photoelectric sensor, ±100 mm correction via electric actuator — for controlling sheet edge or continuous printed line. • Connecting walkway, enabling web threading at floor level while maintaining full access to the slitting station. • All web path rollers are anodized. • Safety guarding for operator protection. Slitting section: A slitting station with individual pneumatic knives and circular counter-knives: • Shear cutting performed against the counter-knives. • Counter-knife shaft driven by an independent motor; counter-knife shaft is pneumatic. • Pneumatic knife holders mounted on a beam with dovetail guide (TIDLAND) and an air supply manifold for individual activation. • 10 slitting sets, each including: Individual TIDLAND pneumatic knife holder (25 mm width) and double-bevel circular knife Ø 90/60 mm. • Set of multi-groove counter-knife rings, 5 mm pitch, 50 mm length. Web separation section: • Separator roller, driven by the slitting motor; angle and curvature fully adjustable. Lay-on roller: • Lay-on roller made of anodized ground aluminum or polyurethane (depending on processed materials). • Pressure is adjustable and synchronized with the winding diameter. • Roller is removable. Automatic splicing / transverse cutting system: • Hydraulically operated pivoting arm including a linear transverse knife and backing plate for securing the web to new cores. Lrjdpjxx Tbcjfx Ahvoi Trim extraction system: • Trim suction unit with two width-adjustable nozzles. • Turbine enclosed in a sound-insulated cabinet, conveying trim to a central system or container (not included). Rewinding section: • Motorized turret (two-position) with two rewinding shafts. • Rewinding shaft drive via oversized asynchronous motor. • Hydraulic centering point for the active rewinding roll. • Two pneumatic expanding shafts Ø76 mm (3”), max load 600 kg each, featuring full-width rubber strips with individual bladders. • Two pneumatic expanding shafts Ø152 mm (6”), max load 1000 kg each, also equipped with full-width rubber strips and individual bladders.

Condition: good (used), Year of construction: 2006, Features:* Used telescopic belt conveyor* Condition: fully functional with traces of use* Ideal for fast material transport* Expertly dismantled and packed* Colour: blueTechnical data:Manufacturer: BuddeType: TGF 02 with hydraulic height adjustmentCondition: Good (used)Colour: blueBuilt: 2006Total length(retracted): 5.000 mmTotal length(extended): 11,500 mmTotal width: 1,240 mm incl. switch cabinetTotal width: 990 mmBelt width: 600 mmBelt type: GlattTelescopic belt conveyorThe telescopic belt conveyor is ideally suited in the order picking zone to interlock machines or workstations and to optimise the internal process. During transport, the telescopic belt conveyor can convey sensitive and differently sized containers, boxes or other packaging and article units to the loading or unloading point and also serves, for example, as a connecting section in front of or between production and processing machines. In addition, it enables efficient part transport in operations and warehouses and serves to convey considerable quantities and distances. Customized solutions for your intralogisticsFor roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and unloading your goods, we are your competent partner! We will be pleased to make you an individual offer or advise you on the conception or installation. Simply let us know your requirements and the local Lrodped Tihrsfx Ahvsi

Condition: good (used), Year of construction: 2008, Specification Description Manufacturer Schwan Model Variomat VF 3 Year of manufacture 2008 Serial number 34918 Process type Solvent or water-wash Flexo plate processor Max. plate size approx. 900 × 1200 mm Plate thickness 1.14 – 2.84 mm Functions integrated Wash-out / Drying / Post-Exposure / Finishing Drying unit Heated air circulation with temperature control UV post-exposure unit Integrated Control system PLC with digital temperature and time programming Electrical connection 400 V / 50 Hz / 3 Phase Condition Used machine – cleaned, tested and ready for operation _____ 3. Condition • Very good optical and technical condition Ljdpfxsxwcmle Ahvsri • Fully operational, complete with standard accessories • Cleaned and tested prior to delivery _____