Pipe planer RPG 8.6, Orbitalum

Orbitalum RPG 8.6

Year of construction: 2007, condition: ready for operation (used), A CNC profile drilling machine Voortman with a movable drilling cabin is available. Working height range: 30mm-1050mm, positioning speed: 40m/min, table width: 300mm, max. working width: 1800mm, support depth: 1500mm, tool stations: 5, max. travel speed: 40m/min, tool holder: SK40, drilling diameter range: 5mm-40mm, thread cutting range: M6-M30, working length: 16200mm. Documentation available. On-site inspection possible. Csdjxp Rb Iepfx Aqlorf

Condition: as good as new (ex-display), Year of construction: 2026, sheet width 1050 mm plate thickness 3.3 mm pre-bending 3.0 mm roll length 1050 mm roll diameter 90.0 mm min. dia. 130 mm engine output 1.10 kW weight 570 kg range L-W-H 1.800 x 800 x 1.130 mm Exhibition machine from 2026 With only approximately 2 operating hours Condition like new Special price upon request Furnishing: - Robust electro-mechanical bending machine - 2x central rollers driven by an electric motor (top and bottom roller) - Top roller can be swiveled out manually, with folding bearing - including conical bending device - freely movable control panel - Lower roller manually adjustable, by hand wheel Crodpfow U U Udox Aqljf - asymmetrical roller arrangement - self-braking main motor - Safety device (safety line with switch unit) - CE mark/Declaration of Conformity Special equipment included in the price: - hardened rollers - Motorized side roller adjustment - Digital position display for motor-driven adjustable side roller

Condition: good (used), functionality: fully functional, machine/vehicle number: 24732, Ficep 1105 punching machine, 110tns, multifunction machine, punching 30 x 25, shear 510 x 16mm, 400 x 19mm, 300 x 22mm, 200 x 25mm, 90º angle cutting 150 x 150x16mm, 45º angle cutting 100 x 10 mm, round and square cut 50mm, punching max diameter 32 thickness 26mm, with several working elements, with electric stop, with different accessories, in good condition Csdstvfcmspfx Aqlorf

Condition: used, functionality: fully functional, load capacity: 16,000 kg, lifting height: 13,000 mm, fuel type: electric, mast type: telescopic, construction height: 2,000 mm, empty load weight: 20,170 kg, total length: 5,395 mm, drive type: Elektro, construction width: 2,070 mm, Pick & Carry Crane Mast type: Telescopic Condition: As good as new Technical condition: very good Front tires type: Non Marking Rear tires Type: Non Marking Csdpfx Aqjt Dd U Rolsrf Remote control

Condition: used, Year of construction: 2017, Industrial robot Manufacturer: ABB Cedpfxewrcwcs Aqljrf Type: IRB6700-205/2.80 Year of manufacture: 2017 Includes controller Includes handheld device Includes cable set Weight: approx. 1,260 kg 2 units available Optional: with traversing axis of approx. 25 m Type: IRBT6004 22726

Year of construction: 2000, condition: good (used), Technical Specification Punching/Shearing system Material * flatsteel length : 6.000 mm width : 50-500 mm thicknes : 5-30 mm * angle steel length : 12.000 mm width : 50 x 50 — 150 150 mm thickness : max. 15 mm Punching Machine VPO 1400 Capacity : 1400 kN (140T) Punch diameter/material thickness (max): 32 mm/25 mm Punching in flat- and angle steel : yes Number of punches for flat steel : 4 Number of punches for angle steel : 1 Hydraulic clamping : yes Centring points : yes Mist lubrication system : yes Shear for Flat Steel VPS 1800 Capacity : 1800 kN (180 ton) Csdpfsq Hu H Rjx Aqlorf Width/material thickness (max) : 500 mm/22 mm Hydraulic clamping : yes Mitreshearing : +/- 45° Shear for Angle Steel VHS 1800 Capacity : 1800 kN (180 ton) Suitable for Angle : 50x50x5 up to and included 150x150x15 Hydraulic clamping : yes Punching Unit for Angle Flange Capacity : 600 kN (60 ton) Punchdiameter/material thicknes (max.) : 32 mm / 15 mm Numbering Unit Number of disks : 4 pcs Number of characters : 36 pcs Character hight : 10 mm Number of characters per code : standard max. 16 Inprint : approx 1 mm Electrical power : 3 x 415V AC + N + PE, 50 CPS

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 165 h, load capacity: 35,000 kg, lifting height: 14,500 mm, fuel type: electric, mast type: telescopic, construction height: 2,250 mm, empty load weight: 31,140 kg, total length: 6,170 mm, drive type: Elektro, construction width: 2,300 mm, Pick & Carry Crane Mast type: Telescopic Crodpfx Aqjt Dd U Delof Condition: As good as new Technical condition: very good Front tires Type: Non Marking Front tires Condition: 80 - 100% Rear tires Type: Non Marking Rear tires Condition: 80 - 100% Description: Remote control, support legs, 22 to jib, double hooks Remote control, support legs, 22 to jib, double hooks Remote control, support legs, 22 to jib, double hooks

Condition: used, Year of construction: 2012, functionality: fully functional, total length: 30,000 mm, drilling capacity: 40 mm, type of input current: three-phase, total width: 3,500 mm, drill diameter: 40 mm, input voltage: 400 V, FICEP HP35T - CNC SAWING & DRILLING LINE FOR ANGLE STEEL | YEAR 2012 | RECONDITIONED The Ficep HP35T is a CNC-controlled sawing and drilling line for the economical series processing of angle steel (L-profiles) in structural steelwork. Sawing and drilling run in a single automated pass with DSTV data connectivity, reducing handling, marking time and scrap for beam connections, gusset plates and lattice structures. CONDITION & RECONDITIONING Reconditioned and inspected by a certified technician, ready for operation. - The exact scope of reconditioning varies from machine to machine and is disclosed individually upon serious interest. - Viewing possible by arrangement (machine reconditioned - no demonstration under power). FUNCTION & APPLICATION The HP35T processes equal- and unequal-leg angle steel (L-profiles) up to 350 x 350 mm leg dimension and combines sawing with two drilling spindles (max. dia. 40 mm) into one continuous machining process. Material is fed via a motorized infeed roller conveyor, hydraulically clamped and positioned under CNC control. The PC-based Ficep CNC control enables manual programming at the operator terminal as well as direct program import from structural-steel CAD systems (e.g. Tekla, SDS/2, BOCAD) via DSTV. Typical applications: structural steelwork and profile processing, lattice and mast structures, plant and steel hall construction, gusset plates and beam connections. TECHNICAL DATA - Manufacturer: Ficep | Model: HP35T | Year: 2012 | Serial number: 25029 - Machine type: CNC angle processing line (sawing & drilling line) - Condition: used, reconditioned by certified technician - Cutting process: saw - Drilling spindles: 2 x drilling spindle, max. drill dia. 40 mm - Clamping: hydraulic - Profile type: equal- and unequal-leg angle steel (L-profiles) - Max. leg dimension: up to 350 x 350 mm | Min. profile: approx. from 50 x 50 x 5 mm - Feed rate (max.): approx. up to 40 m/min - Positioning accuracy, longitudinal axis: approx. +/- 0.2 mm - Hydraulic unit motor: approx. 15 kW | Feed motor (servo): approx. 3 kW Crodsxn T Smjpfx Aqlsf - CNC control: Ficep proprietary / PC-based - DSTV interface: direct import from structural-steel CAD - to be confirmed during inspection - Electrical connection: 400 V / 50 Hz / 3-phase + N + PE (TN-S), control voltage approx. 24 V DC - Overall machine length: approx. 30,000 mm (line incl. roller conveyor; exact dimension before loading) - Machine width: approx. 3,500 mm | Machine weight: on request Note: Values marked "approx." are reference figures and will be confirmed bindingly during inspection. SCOPE OF DELIVERY - 1 x Ficep HP35T angle steel processing line (year 2012) - 1 x hydraulic unit (integrated) - 1 x CNC control unit with operator terminal - 1 x infeed roller conveyor (motorized) - 1 x electrical control cabinet - 1 x machine documentation / operating manual (Italian/English) LOGISTICS & LOCATION Location: Ulft (Netherlands), directly at the German border. Dismantling, transport, installation and commissioning can be carried out by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM) specializes in reconditioned Ficep structural-steel machinery - from sawing and drilling lines and profile drilling machines to plasma cutting systems. Further Ficep machines on request. CONTACT / INQUIRY Arrange a viewing | Price on request | Request a callback. Sale exclusively to commercial customers (B2B).

Condition: new, Year of construction: 2025, load capacity: 10,000 kg, self-centering complete set, double drive, synchronous with hand-held remote control with digital display and foot remote control Diameter from 300mm to 3500mm Drive rollers diameter 300mm x 120mm Dimensions: length: 1900mm x width 470mm x height 390mm Speed continuously variable 100 - 1200 mm / min. Motor AC 380 V Load capacity 10 t Total power requirement 1.1 kW Self-aligning for several diameters Codpfev En D Njx Aqlerf Continuously adjustable speed of the drive unit Polyurethane coating of the rollers heat-resistant Optimal load distribution (4 rollers/unit), particularly gentle for workpieces with low wall thickness and sensitive surfaces Remote control on the cable and double foot pedal CE certificate

Condition: good (used), Year of construction: 2019, fuel type: electric, color: yellow, Drivetrain Drive: Wheel Weights Empty weight: 7.300 kg Functional Mast: articulated arm Lifting capacity: 230 kg Working height: 1.500 cm Dimensions of cargo space: 660 x 150 x 210 cm CE mark: yes Maintenance, history and condition Number of owners: 1 Technical condition: good Visual appearance: good Cjdpfx Ajyhvk Tsqlorf Other information Reconditioned: Yes Delivery terms: EXW Max. horizontal reach: 850 m Max swing of arm in degrees: 360 Latest inspection: 2026-02-06 Production country: FR Additional information Please contact Rothlehner Arbeitsbühnen GmbH for more information