AOI

OMRON VT-S720-A

Condition: ready for operation (used), Year of construction: 2001, A complete 5-layer coextrusion blown film line with 5 extruders and all peripheral equipment is available. Total line dimensions X/Y/Z: 14m/22m/11m, blow head: Kiefel Worms FSBK 500 with IBC, die diameter: 500mm, film width range: 700mm-2000mm, haul-off width: 2000mm, winding width: 2000mm, line speed: 120m/min, melting capacity: 500kg/h, total power requirement: approx. 300kW. 1) Double winder Wintech, winding width: 2000mm, film thickness range: 35µm-150µm, max. roll diameter: 1000mm, max. roll weight: 1900kg, core inner diameter: 152mm/6inch. 2) Extruder Kiefel Worms 70.29D, power: 89kW, screw: 5-zone barrier screw, speed: 125rpm, renewed: 2010. 3) Adhesive extruder Kiefel Worms 50.25D, power: 34kW, screw: 3-zone barrier screw, speed: 200rpm. 4) Center extruder Kiefel Worms 50.25D, power: 34kW, screw: 3-zone core progressive screw, speed: 175rpm. 5) Adhesion promoting extruder Kiefel Worms 50.25D for the outer layer, power: 34kW, screw: 3-zone barrier screw, speed: 200rpm. 6) Kiefel Worms 80.25D outer layer extruder, power: 125kW, screw: 5-zone barrier screw, speed: 150rpm. 7) Reinhold SRK 200/9.6 film calibrating device. The entire line is controlled by a Plast Control system. Further components: integrated width measurement, C-scan for profile measurement, web center control, corona pre-treatment, film pre-draw. Including a replacement FSBK 5-layer blow head with IBC, replacement rollers, annular gap blower with filter, suction units, crane and external system terminal. Documentation available. On-site inspection is possible. Fpodpfxev T An So Ad Iei

Year of construction: 2012, operating hours: 63,311 h, condition: used, functionality: fully functional, machine/vehicle number: Y27639, Fitter fully functional Fodpfjudk A Hox Ad Ijpi

Year of construction: 2003, condition: used, Technical data: - Manufacturer: Weinig - Type: Unimat Super 4 - Year of manufacture: 2003 - Working width: 25 - 150 mm - Working height: 15 - 50 mm- Shaft arrangement: Spindle 1 below: Planing and milling the guide groove 125x40x40 mm, Z=2 125x120x40 mm, Z=2 Spindle 2 above: Combination tool consisting of special planing head with guide groove and 2 flat milling cutters. Precise thickness planing and flat milling of the gluing surfaces on the right and left. Face milling cutter on the right: 240x17x40mm, Z=8 Special planing head: 125x240x40mm, Z=4 Face milling cutter on the left: 240x80x122mm, Z=8 Tool flight circles 125 and 250mm Spindle 3 below: Removing the guide groove and finish planing. 125x170x40mm, Z=4 - Spindle 1: 11 KW - Spindle 2: 18.5 KW - Spindle 3: 5.5 KW - Feed engine: 2.2 KW - Feedspeed: 5-20 m/min. - Speed spindle 1 and 3: 6.000 rpm. - Speed spindle 2: 7.000 rpm. - Transport rollers D (hardened): 140 mm - Length of infeed table: 2.000 mm - Hardened machine tables Fsdpfxsyatffe Ad Ijpi - Guide groove in machine table - Suction nozzles 2x140 mm, 1x160 mm - Volume flow: approx. 5,500 m³/h - Volts/Hz: 400/50 - Location: Blomberg warehouse from 01/2026

Year of construction: 2018, condition: like new (used), functionality: fully functional, MACCHI COEXTRUSION LINE FOR 7-LAYER EVOH BLOWN FILM Complete line for the production of 7-layer EVOH blown film Fpodpfxoy Nk Haj Ad Ioi 4 Macchi extruders with 65 mm screw diameter 3 Macchi extruders with 55 mm screw diameter Innoplast gravimetric dosing units 7-layer die head, 450 mm diameter with IBC, 2.4 mm GAP K-Design cooling ring Double thickness control IR+XRay Maximum width 2400 mm Calibration basket Rotating haul-off Cason corona treater Macchi BO-Plus double back-to-back automatic winder Web guide Year 2018

Condition: good (used), Year of construction: 2016, functionality: fully functional, Please provide us with your offer price. Sale only within Europe (EU), including Turkey; United Kingdom, Switzerland. Technical data can be found in the handout. No packaging; any warranty rights are excluded. If you intend to dismantle the system yourself, please indicate this in your offer. We do not assume any liability for the accuracy of the technical data, for the completeness of accessories and tooling, nor for compliance with all safety and environmental protection requirements as stated in the accident prevention regulations. Fpedpfew Dfqpjx Ad Iei

Year of construction: 2012, operating hours: 63,311 h, condition: used, functionality: fully functional, machine/vehicle number: Y27639, Fitter fully functional Fpsdpfx Adoudkz Ns Iji

Year of construction: 2011, condition: ready for operation (used), An inline SMT stencil printer/solder paste printer is offered. Print area X/Y: 50mm/40.5mm - 510mm/508.5mm, PCB thickness: 0.2mm - 6mm, board weight max.: approx. 1kg, print pressure range: 0 - 20kg, core cycle time: approx. 12s, machine alignment capability: greater 2Cpk at +/-12.5µm 6 Sigma, process/wet print accuracy: greater 2Cpk at +/-25µm 6 Sigma, installation space L/W/H: approx. 2060mm/1500mm/1570mm, machine weight: approx. 800kg. Inspection by arrangement possible. Fpsdpfxsylzhls Ad Iji

Year of construction: 2012, operating hours: 34,463 h, condition: used, Yamaha stencil printer Fpjdpfoudk Dksx Ad Iji

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: Zeile 270, used inline automatic 3D X inspection system (AOI) for assembled PCBs. Defect types: misalignment, bent pins, etc. Multiple units are available, manufactured between 2013 and 2016. ----- Please indicate your offer price. Sale only within Europe (EU), including Turkey, United Kingdom, and Switzerland. ----- Technical specifications can be found in the handout. Without packaging; all warranty rights are excluded. If you intend to dismantle the equipment yourself, please mention this in your offer. We make no guarantees regarding the accuracy of technical data, completeness of accessories and tooling, or compliance with all safety and environmental protection requirements as outlined in accident prevention regulations. Fpsdpswzv Itjfx Ad Iei

Condition: good (used), Year of construction: 2024, Year of manufacture: 2024 3D AOI inspection system with intelligent DLP projection 1 x AOI database structure Web Apache server Fpjdpjyw Nxwefx Ad Ioi 1 x teaching station (offline programming) 1 x verification station (verification or repair station) 1 x Q-up (analysis station) 1 x administrative interface for AOI management PCB thickness: 0.4-4 mm PCB weight: up to 4 kg PCB warp: +/- 10 mm Compressed air: 0.3x0.6 Mpyi, 10 l/min Lighting: RGB color high-light method 2D camera and 3D measurement Resolution: telecentric lens with 15µ + 4 side cameras with 10µ each Height measurement up to 25 mm PCB size: 50x50 – 510x460 mm Component clearance: top 40 mm, bottom 40 mm