Used Zftk 250 for sale (9,789)

Condition: used, Year of construction: 1995, functionality: fully functional, We will be selling our finger jointing line at the end of 2025/beginning of 2026, starting from the vacuum destacker (photo 1) up to the finger joint press including the cross-cut saw (photo 11), with only the defect cross-cut saw not for sale. Finger jointing line, model HK 250 L, year 1995 (see photo 7), with upgrades in 2013: control system and finger joint press were replaced. Hnjdpfx Afjw Uf Tkohjk Glue application is performed using the bottom-mixing method with glue rollers (see photo 6). The control system for the entire line and the press was renewed by Somako. Production with this line will continue until the end of 2025, therefore it can be inspected in operation at any time. The price depends on whether the entire line or only parts of it are purchased. Individual components can also be sold as spare parts.

Condition: used, Year of construction: 1979, machine/vehicle number: Res BS, Demag PK2 Chain Hoist Crane Lifting Unit 250kg / 500kg Approx. 40 units available!!! 250kg / 0.25t rated load / lifting capacity – single fall – 500.- 500kg / 0.5t rated load / lifting capacity – double fall – 600.- With 2 lifting speeds, lifting height approx. 3-4m Complete with pendant control and load hook Hnsdpfxovzkylj Afhsk Total weight approx. 40kg, 380V 50Hz connection Top condition, fully functional. Not a worn or used device! Connect and start operating. Comes from ongoing operations Item location: 75053 Gondelsheim See pictures

Condition: refurbished (used), battery capacity: 500 Ah, battery voltage: 80 V, total height: 627 mm, total length: 1,025 mm, total width: 708 mm, Tested forklift battery for your forklift - 80V 4PZS 500Ah - DIN A + 1 year warranty + Includes Aquamatik filling system + Includes end cell connector & REMA 320 plug (other connectors can be installed upon request) + Capacity: min. 90-100% (C5 capacity protocol will be provided upon delivery) + Year of manufacture: 2024 Dimensions: Length 1,025 mm Width 708 mm Height 627 mm Weight: approx. 1,210 kg Suitable for the following models and others: Linde E 16 P - 386-02 - side battery change Linde E 20 - 1252-01 Linde E 20 - 336-00 Linde E 20 - 387-00 Linde E 20 FLAT - 336-00 Linde E 20 L - 386-00 Linde E 20 R - 387-00 Linde E 25 - 1252-01 Linde E 25 - 387-00 Linde E 25 C - 387-00 Linde E 25 R - 387-00 Linde E 25 RL - 387-00 Linde E 25 S - 1276-00 Linde E 30 - 1252-01 Linde E 30 - 387-00 Linde E 30 - 387-00 - side battery change Linde E 30 / 500 - 387-00 Linde E 30 C - 387-00 Linde E 30 L - 387-00 - side battery change Linde E 30 R - 387-00 Linde E 30 RL - 387-00 Linde E 30 S - 1276-00 Linde P 200 - 370-00 Linde P 250 - 127-00 - vertical battery change Linde P 250 S - 127-05 Linde P 250 SWB - 5007-10 - side battery change Linde P 250 SWB - 5007-10 - vertical battery change Linde W 20 - 127-00 Linde W 20 - 127-00 - vertical battery change Linde W 20 - 127-06 - overhead battery change Linde W 20 - 5007-10 - side battery change Linde V 20 - 5007-10 - vertical battery change Hnedowzvzyspfx Afhsk Linde W 30 - 5007-10 - side battery change Linde W 30 - 5007-10 - vertical battery change Toyota 7FBMF16 Toyota 7FBMF18 Atlet EH 25 Clark STE 20 Other common battery sizes available on request. Transport possible.

Condition: excellent (used), Stair Tensioner (28366) Clamping height 200 - 250 mm T grooves width 12 mm Clamping screw M 10 4 pieces available Hsdpfxjln Ulae Afhonk Weight 8,5 kg

Condition: good (used), Year of construction: 2001, spindle speed (min.): 2,500 rpm, Model Year: 2001 Chuck Diameter: 10" Hedpfsx N A Dwsx Afhjnk Number of Axes: 2 Length: 650 mm Swing Diameter: 650 mm Spindle Speed (RPM): 2500 Machinable Materials: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Delrin, PEEK

Condition: used, The press is extremely stable thanks to its heavy steel construction, which is fully welded. The working surface of the press can be easily raised and lowered to any position by means of a hydraulic actuator. Additional tools are available and your own tools can be adapted. Specification: Tonnage: 250 T Hnedpfxsugtv Is Afhsk Year: 1991 If you have any further questions, we will be happy to answer them.

Condition: refurbished (used), Year of construction: 2016, functionality: fully functional, type of input current: three-phase, overall weight: 1,000 kg, input frequency: 50 Hz, nominal power (apparent): 250 kVA, type of output current: three-phase, Equipment: type plate available,

Condition: used, Vise jaw width 200 mm Jaw height 80 mm Plate: Width below 250 mm Less than 500 mm length Hnsdpfx Afjdd Tpiohek Opening width 250 mm Weight 72 kg

Condition: ready for operation (used), Year of construction: 2008, operating hours: 61,440 h, functionality: fully functional, machine/vehicle number: 06800003891, rotational speed (max.): 5,000 rpm, controller model: Siemens 840D powerline, Equipment: chip conveyor, documentation/manual, TECHNICAL DETAILS Max. speed: 5,000 rpm MACHINE DETAILS Control: Siemens 840D powerline Electrical Data Apparent power: 50 kVA Rated current: max. 72 A Current: 80 A Mains voltage: 400 V Frequency: 50 Hz Control voltage: 230 V Voltage: 24 V Operating hours: approx. 76,300 h Spindle hours: approx. 61,440 h EQUIPMENT Pallet circulation system Material conveyor belts for machined parts Chip conveyor Documentation/manual Note: The machine is sold without chuck, tools or raw part holders. Additionally, the seller can offer the following accessories: SMW KNCS225 chuck for €1,500 Ewab pallets (base pallets) 10 units for €500 Hjdpfx Afeyzqtkjhenk Extension of transport belts for finished parts €2,000 Basic holder set VDI 40 suitable for the machine, 10 units for €1,000

Condition: like new (used), Year of construction: 2012, input voltage: 400 V, 2 X Zentner Washer 250 - Screen Cleaning Units Unit 1 Unused and New Condition $20,000.00 USD Hnodpsv Dpy Nefx Afhok Unit 2 Used - Excellent Condition $16,000.00 USD

Condition: new, pressure: 250stroke: 450table length: 1.500performance of pump: 35motor power: 15weight approx.: 2.500Workshop Press: Motor and manual control Laterally movable cylinder Hema or Caproni pump Pressure gauge Operating manual included CE-certified Made in Turkey Frame opening (clear width): 1500 × 450 mm Hedpfx Aeit E N Uefhjnk

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 1114.3705-24, Used CNC Lathe Make: Boehringer Type: VDF 250Cm Year of Manufacture: 1997 VDF Boehringer 250C The machine has the following features: 1000mm turning length No tailstock Driven tools Special indexing chuck Siemens 840C control system The Boehringer VDF 250Cm is a CNC lathe designed for machining chucked parts. It is characterized by its robust construction and precise machining capabilities. Technical Specifications (Model Year 1997) Working Area: Swing over Bed: 550 mm Swing over Cross Slide: 480 mm X-Axis Travel: 405 mm Z-Axis Travel: 1,099 mm Maximum Turning Length: 1,000 mm (None) Tailstock: Tool Turret: Number of Positions: 12 Tool Holder: VDI 50 DIN 69880 Live Tools: YES Spindle: Spindle Head Size: 8 DIN 55026 Spindle Bore: 103 mm Max. Chuck Diameter: 315 mm Max. Drive Power (50% Duty Cycle): 53 kW Max. Torque: 780 Nm Speed Range: 30–3,000 rpm Feeds: Automatic Feeds: 1–10,000 mm/min Rapid traverse speed: 10 m/min (X and Z axes) Max. feed force: 15 kN Dimensions and weight: Machine dimensions (L × W × H): approx. 5,400 × 3,200 × 2,400 mm Machine weight: approx. 11,000 kg Equipment: Pivoting control panel Hydraulic system from HYDROKRAFT Coolant system with 600 l tank, max. pump pressure 5.5 bar, flow rate 60 l/min, pump power 1.1 kW Chip conveyor with 325 l tank capacity, right-hand discharge 3-jaw power chuck Oil mist extraction Control cabinet with cooling unit and temperature controller from RITTAL Control system: SIEMENS SINUMERIK 840 C Variants and Differences There are various variants of the VDF 250 series, such as the VDF 250 CU, which can be equipped with different control systems (e.g., PHILIPS B2T) and technical specifications. Some models feature driven tools and a tailstock, while others are designed as pure chuck-type lathes without a tailstock. Hodpfowlap Asx Afhsnk Conclusion The Boehringer VDF 250 Cm is a versatile CNC lathe characterized by its stability and precision. With its robust construction and extensive features, it is ideally suited for machining chucked parts in a variety of production environments.

Condition: used, Year of construction: 1999, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Daewoo Lathe Model Puma 2500 CNC Fanuc Hjdpfx Aey Dcq Hofhenk Year: 1998

Condition: used, Year of construction: 2020, controller manufacturer: Siemens, controller model: 840 Dsl, _____ Description: Year of manuf. : 2020 Control : Siemens 840 Dsl Turning diam. : 140 mm Turning length : 700 mm In General: Max. workpiece diameter:140 mm Chuck diameter:250 mm Max. turning length:700 mm Track I: Tool carrier I:Tool turret (X/Z) Tool drive:9,600 rpm, 44 Nm Tool holder:BMT Number of stations:11 + 1 Part gripper X-axis:310 mm Z-axis:1,115 mm Position sensors (X/Z):Direct scales Track II: Main spindle (OP10):Travelling direct drive spindle Speed:5,000 rpm Power:33.9 kW Torque:231 Nm Chuck:Collet chuck Clamping cylinder:Hydraulic clamping cylinder Support control:Pneumatic W-axis:772 mm C-axis:0.01° Position sensor (W):Direct scale : Sub-spindle (OP20):Direct drive spindle Speed:5,000 rpm Power:33.9 kW Torque:231 Nm Chuck:2+2-jaw power chuck Clamping cylinder:Hydraulic clamping cylinder C-axis:0.01° Track III: Tool Carrier II:Tool turret (X/Y/Z) Tool drive:9,600 rpm, 44 Nm Tool holder:BMT Number of stations:11 + 1 Part gripper X-axis:310 mm Y-axis:50 mm mm) Z-axis:1,115 mm Position sensors (X/Z):Direct scales Track IV: Main spindle (OP30):Travelling motor spindle Speed:5,000 rpm Power:33.9 kW Hedpfx Afoy A U I Iohonk Torque:231 Nm Chuck:Collet chuck Clamping cylinder:Hydraulic clamping cylinder Support control:Pneumatic W-axis:988 mm C-axis:0.01° Position sensor (W):Direct scale : Tailstock:Fixed arrangement Quill:Hydraulic with position control Track V: Tool Carrier III:Milling/turning turret (X/Z) Tool drive:1,000 rpm, 240 Nm Tool holder:HSK-63 Number of stations:5 + 1 Part gripper X-axis:310 mm Z-axis:1,115 mm Position sensors (X/Z):Direct scales Automation: Feed conveyor:O-type, 18 base carriers Discharge conveyor:O-type, 18 base carriers Part transfer:3 grippers on tool turret Max. workpiece diameter:140 mm Max. workpiece height:630 mm Workpiece weight:max. 20 kg Equipment: Position measurement systems:Direct (glass scales) Chip removal:Chip conveyor Workpiece measurement:Renishaw OMP Coolant supply:Internal coolant with filter, 17 bar Coolant temperature control:Immersion recooler Emulsion mist separator:Mechanical Software option I:Turning/milling operation Software option II:Automatic retraction Software option II:Sister tool management

Condition: like new (used), Year of construction: 2010, operating hours: 65,850 h, functionality: fully functional, machine/vehicle number: 61013689, clamping force: 2,500 kN, screw diameter: 50 mm, clearance between the columns: 630 mm, displacement volume: 432 cm³, injection pressure: 2,304 bar, injection weight: 393 g, Equipment: documentation/manual, Here, as a specialist dealer for injection moulding machines, we are offering the following well-maintained used injection moulding machine. Of course, we also purchase well-maintained used injection moulding machines, production year 2010 onwards. We have been wholesalers of used injection moulding machines for over 25 years. Special note – tax hint and benefit for used machines: From July 1, 2025, used machinery can also be depreciated for tax purposes at 30% per year via a special depreciation allowance. In addition to the lower price compared to new machinery, you can claim the same depreciation rates as you would with a new machine. Keyword: Growth Booster (§ 7 paragraph 2 EStG-E) Currently in stock at our Hannover warehouse, machine fully tested Manufacturer: Krauss Maffei Model: KM 250 1000 CX Control unit: MC5 Year of manufacture: 2010 Operating hours: 65,850 h Machine number: 61013689 Processed materials: PE and PP thermoplastics Extras - 2 x core puller (movable WAP, fixed WAP) - Pneumatic valve 1 at FWAP - Accumulator for increased injection performance - Fast SK disassembly CX Midrange - Ejection of cold nozzle plug - Start handling during mould movement - Start-up control - Cycle time analysis - External USB keyboard - Graphic analysis – maintenance notes - Electronic coding injection unit - Pneumatic valve at BWAP blow-out - 12 temperature control zones - Potential-free contact BDE - Process monitoring - Cycle memory - Trend graphics – setpoint/actual comparison - PV control - Active back pressure control - Single ownership – origin Germany Regularly maintained by both manufacturer and previous owner Clamping Unit Clamping force: 2500 kN / 250 tons Tie bar spacing: 630 x 630 mm Mounting platen dimensions: 995 x 1050 mm Opening stroke: 820 mm Minimum mould height: 330 mm Maximum opening width: 1,150 mm Ejector stroke: 200 mm Ejector force: max 57 kN / 26.3 kN return Injection Unit Screw diameter: 50 mm Shot volume: 432 cm³ Shot weight: 393 g/PS Injection pressure: 2,304 bar Hsdpfxjxqhuue Afhenk Robot LRX S50 - 3 gripper circuits – 4 vacuum circuits Robot LRX 100 - 1 gripper circuit – 4 vacuum circuits Electrics Pump: 45 kW Heating: 5 zones, 18.7 kW Weight: 13,900 kg Dimensions: 5.7 x 2.3 x 2.3 m Full documentation, manual, and software available. Available immediately ex our warehouse in Hannover/Germany or delivered free to your premises against freight charges. The machine is fully function-tested and is sold as our exclusive property. The machine is immediately available from our warehouse in Hannover, is function-tested, and can be demonstrated under power. Further information about the machines and our company: - We sell only our own machines, purchased from operating production, from our Hannover warehouse. - All machines offered are checked and tested prior to removal. - We DO NOT sell insolvency assets – we are NOT brokers acting on behalf of third-party owners. - All offered machines come from successful companies where maintenance and care are standard practice. - All machines offered are available for inspection in our warehouse.

Condition: excellent (used), Year of construction: 2004, operating hours: 116,000 h, functionality: fully functional, Screw compressor Kaeser ESD441 250 kW Hnjdpfx Ajtn Utljfhjk 8 bar 42 m3/min Year of manufacture: 2004 Operating hours: 116,060

Condition: used, The machine is suitable for the agglomeration of thermoplastic films and fibres. The throughput can be estimated to be 500 kg - 1000 kg/h, depending on the material, its condition and humidity. The system consists of: • conveyor belt • load-dependent control for the belt conveyor. • metal detector • HERBOLD granulator type SMS 45/100-H5-3 • pneumatic material transport to the storage silo • plastcompactor unit HV-70 (consisting of a storage silo feeding screw, plastcompactor, central blower, cooling circuit) • HERBOLD secondary granulator type SML 45/100-S4-2 • intensive cooling Hodjy Auryopfx Afhjnk • SZS II 630/200 conveying fan • screening machine, undersize grain will be returned into the compactor silo. • material conveyor type MFT with big bag station and automatic switchover to the on-site silo • automatic exhaust air filter • electrical control unit • compressor.

Condition: used, The machine is suitable for the agglomeration of thermoplastic films and fibres. The throughput can be estimated to be 500 kg - 1000 kg/h, depending on the material, its condition and humidity. The system consists of: • conveyor belt • load-dependent control for the belt conveyor. • metal detector • HERBOLD granulator type SMS 45/100-H5-3 • pneumatic material transport to the storage silo • plastcompactor unit HV-70 (consisting of a storage silo feeding screw, plastcompactor, central blower, cooling circuit) • HERBOLD secondary granulator type SML 45/100-S4-2 • intensive cooling • SZS II 630/200 conveying fan • screening machine, undersize grain will be returned into the compactor silo. • material conveyor type MFT with big bag station and automatic switchover to the on-site silo • automatic exhaust air filter Hedpfx Aoy Auawsfhenk • electrical control unit • compressor.

Condition: excellent (used), Catalogue number 7959 TECHNICAL DATA - Track width: 250 mm - Shaft width: 250 mm - Maximum saw blade diameter for multi-blade saw: 350 mm - Saw blade bore diameter: 70 mm - Maximum cutting height for multi-blade saw: 120 mm - Table width with clearance: 830 mm - Table length: 1780 mm Hnsdpfxsy Am Erj Afhok – Top section: - Kickback devices - Pressure roller, sliding, metal, smooth - Kickback devices - Pressure roller, sliding - Shaft with saw blades - Pressure roller, sliding, metal, 2 pcs – Bottom section: - Guide rail - Kickback devices - Track (caterpillar) - Electric body up/down adjustment - Manual adjustment of shaft with saw blades - Central lubrication - Infinitely variable feed speed adjustment - Feed motor 1.1 kW - Main motor 37 kW - Extraction port diameter: 170 mm - Overall dimensions (L/W/H): 2000x1500x2000 mm - Weight: 1850 kg ADVANTAGES – German-made – Used multi-blade saw, in very good condition Net price: 45,900 PLN Net price: 10,930 EUR depending on the rate of 4.2 EUR (Prices may change with greater fluctuations)

Condition: new, The ZSH chipper series is specifically designed for forestry, horticulture, and municipal operations. These chippers are primarily used for volume reduction of tree and shrub cuttings as well as smaller trunk diameters. The produced wood chips are suitable for combustion in wood chip heating systems with screw conveyors or as a pre-stage in pellet production. The machines are robust, reliable, easy to operate, powerful, and produce wood chips of consistent quality and uniform size. Hnsdpfx Afeyr Tkfshjk Other features Cost-effective solution for wood chip production | Compact design | User-friendly | Low energy consumption

Condition: as good as new (ex-display), Hot water and steam high-pressure trailer, like new with 200 hours, complete with high- and low-pressure hoses, guns, lances, and nozzles. Hedpfx Aoyvv Rkjfhjnk

Condition: used, mileage: 131,000 km, power: 184 kW (250.17 HP), first registration: 09/2004, fuel type: diesel, overall weight: 15,000 kg, axle configuration: 2 axles, color: white, gearing type: mechanical, emission class: euro3, loading space volume: 28 m³, loading space length: 5,300 mm, loading space width: 2,480 mm, loading space height: 2,150 mm, Equipment: ABS, air conditioning, tail-lift, Volvo FL6H 250 Box Truck Camera Old Tachograph Tail Lift . For inquiries: 0426360 Hnedpfxsy Dkq Ue Afhok * Condition: very good * Power output: 184 kW / 250 HP * Displacement: 5,480 cc * Perm. total weight: 15,000 kg * Curb weight: 7,100 kg * ABS * EBS * Rear axle differential lock * Manual roof hatch * Old tachograph * Air-suspended comfort driver's seat * Driver's seat heating * Suspension: leaf / air * Air conditioning * Electric windows (driver/passenger) * Electrically heated and adjustable mirrors * CD radio * Reversing camera * Exterior sun visor * Storage box left side / plastic * Fog lights * Tail lift: Zepro, lifting capacity 2,000 kg Body: Box * Lashing rails left / right Dimensions (cargo compartment/cargo area) * Cargo length: 5,300 mm * Cargo width: 2,480 mm * Cargo height: 2,150 mm Tires: 1st axle: 275 / 70 R 22.5 leaf-sprung / 35% 2nd axle: 275 / 70 R 22.5 air-sprung / 65% --- Price: €13,900 + 19% VAT For further questions, you can reach us at the following phone numbers: We speak: German, English, French and ????? Subject to errors, misprints, and prior sale.

Condition: used, mileage: 319,000 km, power: 188 kW (255.61 HP), first registration: 01/2019, fuel type: diesel, axle configuration: 4x2, wheelbase: 5,500 mm, fuel: diesel, brakes: engine braking, color: white, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 9,600 mm, total width: 2,550 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 11,500 kg, loading space length: 7,500 mm, loading space width: 2,500 mm, loading space height: 2,450 mm, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, power mirror, spoiler, tail-lift, Front axle: Max. axle load: 8000 kg; Tyre profile left: 50%; Tyre profile right: 50%; Suspension: leaf suspension Rear axle: Double wheels; Max. axle load: 11500 kg; Tyre profile left inner: 50%; Tyre profile left outer: 50%; Tyre profile right outer: 50%; Tyre profile right outer: 50%; Suspension: air suspension Number of cylinders: 6 Engine capacity: 7.698 cc Empty weight: 8.860 kg Hnedpfoygw Hgex Afhsk Carrying capacity: 11.640 kg GVW: 20.500 kg Tail lift: Dhollandia, 2500 kg Registration number: 33-BLT-9 = Additional options and accessories = - Aluminium fuel tank - Camera system - Heavy duty engine brake - Lock diff - Outside temperature display - Radio - Reversing camera - Roof spoiler - Side door - Visor = Remarks = Dutch Truck

Year of construction: 2023, condition: used, Manufacturer : Sesotec Model : Raycon D+ HX 1400 / 660 / 450 / 250 Year : 2023 Type: X-ray detector – X-ray inspection systems for food Product width: max: 450 mm Hnsdpfxsy Abcre Afhok Maximum product height: 250 mm Belt width: 660 mm Detection : 0.4 mm Capacity : 900 pcs/min Speed v = 0,32 -1,04 m/s X-ray Source : 40–100 kV / 2.0–5.0 mA (200 W) Weight : 585 kg Weight / conveyor : 111 kg

Condition: used, Year of construction: 2014, Year of manufacture: 2014 Price: On request Hjdey Dgx Uopfx Afhonk