Used Worm Gear Cutter for sale (10,116)

Condition: ready for operation (used), Year of construction: 2010, A Treif dicing and strip cutter for meat is available. Rated throughput capacity: approx. 800kg/h, cutting length range: 0.5mm-32mm, cutting chamber dimensions X/Y/Z: 96mm/96mm/30mm, grid set range: 4mm-96mm, machine dimensions X/Y/Z: approx. 1000mm/800mm/1000mm, weight: approx. 200kg. On-site inspection is possible. Bwodpeyf I Hzefx Abbsh

Condition: good (used), Year of construction: 2012, Marel I-Cut 10 Portion Cutter The I-Cut 10 PortionCutter is an accurate and reliable portioning machine designed to give immediate results on your bottom line. With only a few touches to the control panel you can move away from inaccurate cutting by hand to accurate portions of boneless meat products – beef, pork and veal – on weight every time. The I-Cut 10 enables you to make substantial savings on labour because of the speed and versatility of the machine. Improvements in yield will furthermore secure a very fast payback on your investment. Bwedjyf Eqkjpfx Abboh The design of the machine makes it very easy to clean securing a high hygienic level and the small footprint means it will t into almost any plant layout. Technical data: Belt speed: 0,01 – 0,34 m/sec 10 cuts/s Belt width: 280 mm Belt length (in-feed/out-feed conveyor): 4025/2162 mm Temparature: 0-30 оC Water consumption: 0-2 l/min Voltage of power source: from 3 x 400 V to 3 x 480 V + PE Power consumption: 4 kW Frequency: 50/60 Hz Automatic circuit breakers residual current: Type B, 500 mА Dimensions (L x W x H): 2.700 x 980 x 1.560 mm Weight: approx. 360 kg Year: 2012

Condition: used, Year of construction: 1986, machine/vehicle number: 275590, Ref. No. 25362 Technical Data: - Drilling capacity 25 mm - Drill spindle taper MK 3 - Drill spindle speeds 100 / 205 / 345 / 440 rpm 695 / 885 / 1450 / 2900 rpm - Drill spindle stroke 130 mm - Drill spindle reach 260 mm - Coordinate table with 3 T-slots 580 x 240 mm - Table travel X-axis: 415 mm Y-axis: 155 mm - Drive 400 V / 0.75 / 0.9 kW - Space required approx. W 900 x H 1800 x D 700 mm - Weight approx. 270 kg - Machine vice Bwjdpfx Aboyf Ehisbsh

Condition: good (used), Year of construction: 2004, Ref. -No.: 10612 Manufacturer: LIEBHERR Type: LC 3002 Year of construction: 2004 Type of control: CNC Control: LIEBHERR Storage location: Halberstadt Country of origin: Germany Serial no.: 30XX Max. Module: 30 mm Min. Module: 4 mm Max. Workpiece Diameter: 3000 mm ambient temperature: +15...+38 ° cutting speed: 25 - 250 m / min Milling head swivel angle: 0,001 ° Resolution accuracy: 0,1 Degree Workpiece table load: 300 kN Operating voltage: 400 V control voltage: 24 V Bwjdpfx Abjycpx Toboh frequency: 50 Hz Max. rated current: 230 A Fuse in the supply line: 250 A Max. milling diameter spur gears/helical gears: 3.000 mm Further information: Suitable for internal and external gear cutting. The machine can be viewed by appointment.

Condition: excellent (used), Year of construction: 1991, max. wheel diameter 10 - 330 mm gear width 180 mm max. module 7 min. module 0,5 Bwjdpew I Hq Defx Abbjh clamping length 420 mm number of teeth 10 - 600 ical angle +/- 45 ° turning speeds 1100 - 1900 U/min grinding wheel diameter 280 - 350 mm grinding wheel width 84 - 104 weight of the machine ca. 5,1 t dimensions of the machine ca. 4,5 x 6,0 x 2,3 m

Condition: excellent (used), Year of construction: 1997, max. wheel diameter 820 mm gear width 300 mm max. module 8 min. module 0,5 clamping length 865 mm number of teeth 10 - 600 ical angle +/- 30 ° Bedpfswy H Ihjx Abbswh turning speeds 1100 - 2150 U/min grinding wheel diameter 280 - 400 mm grinding wheel width 84 /104 workpiece weight max. 300 kg weight of the machine ca. 11,5 t dimensions of the machine ca. 6,0 x 4,8 x 2,9 m including Reishauer AF Filter, flanges, wheels,...

Condition: excellent (used), Year of construction: 2014, max. wheel diameter 20 - 320 mm gear width 150 mm max. module 8 min. module 1 surface area 1200 x 190 mm tool diameter 175 - 260 mm turning speeds 45 - 465 U/min Control Siemens total power requirement 13 kW Bwsdov Nracopfx Abbsh weight of the machine ca. 5,2 t Machine in excellent condition, with many accessories. Retrofitted in 2014, Siemens control system.

Condition: good (used), Year of construction: 2007, max. wheel diameter 400 mm gear width 250 mm max. module 8 min. module 0,5 root circle diameter 10 mm number of teeth 5 - 999 ical angle +/- 45 ° weight 12.5 t With Hoffmann filter system: Year of manufacture: 2006 Filter no. 05919 - Type HSF 100 SEK • Grinding wheel flange • 1 grinding wheel • 1 original dressing device • 1 set of dressing wheels Bwsdpfx Absyclrpsboh • 1 sensor -> Very good condition, only 22,500 operating hours

Year of construction: 2023, operating hours: 2 h, condition: used, machine/vehicle number: 5767/78631, Axle distance: approx. 40-175 mm, max. test piece diameter: approx. 200 mm, net weight: approx. 110 kg, adjustable measuring force: approx. 1-11 N, power consumption: approx. 0.2 kW, control/switch FRENCO, serial number: 30020-000147, various measuring accessories, 1 operating panel, single-track/single-door, 1 DELL flat screen, approx. 22 inches, year of manufacture: 2022 Bjdex Aklmjpfx Abbswh

Condition: used, Year of construction: 1959, total height: 1,900 mm, total width: 2,200 mm, total length: 1,500 mm, Empty weight: 2.500 kg Price: On request - Year: 1959 - Documentation available: Yes - CE certificate present: No - Serial number: 80 - Motor power: 5.0kW - Transport dimensions: 1500mm x 2200mm x 1900mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 3 Bsdpowniikjfx Abbewh Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2003, operating hours: 4,428 h, Price: On request - Year: 2003 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Operating hours: 4428 - Drive system: CNC Bjdpewnidhsfx Abbjwh - Control system brand: Siemens - Power [kW]: 37.0 - Operating pressure [bar]: 4137 - X-axis travel [mm]: 6500 - Y-axis travel [mm]: 3300 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 45 h, machine/vehicle number: 202023-078, Multifunctional CAM cutting system in pure waterjet technology - without abrasives (waterjet cutting system / water cutting system) Bwjdowrn Iyspfx Abbeh 2 cutting bridge with 2 cutting heads including Z-axis 1 head 2D cut 1 head 2D cut For cutting foam, plastic, technical textiles and other flat, flexible, non-metallic materials Maximum feed-through height: 140 mm Cutting area in X and Y: 28500 mm * 2750 mm Protection class: IP54 incl. high-pressure pump BFT Ecotron 40.22 (Product photo as an example) The machine is CE-certified.

Condition: used, functionality: unexamined, Ferwood code: RU0010348 - Manufacturer code: JS-EV040 - Condition: Used - Functionality: Not tested - Compatible machine: - If interested, we offer an overhaul service; please contact us. 10KG - 46X39X27 Bsdpfx Aoycfhqebbswh

Condition: used, machine/vehicle number: 008005, Max width workable: 2440 mm Bjdpfx Ajwu Aacobbjwh

Condition: good (used), machine/vehicle number: WDB9323361K983197, mileage: 412,928 km, power: 302 kW (410.61 HP), first registration: 07/2006, fuel type: diesel, tire condition: 50 %, axle configuration: 8x8, fuel: diesel, brakes: engine braking, color: other, driver cabin: day cab, gearing type: mechanical, emission class: euro4, suspension: steel, total length: 9,000 mm, total width: 2,500 mm, total height: 3,500 mm, Year of construction: 2006, Equipment: ABS, air conditioning, differential lock, electric window regulation, = Additional options and accessories = - 1 fuel tank - Airbag - Armrest - Day Cabin - Drum brakes - Front suspension: Leaf - Hub Reduction - Hydraulics - Open roof - PTO - Rear suspension: Leaf - Sper - Thick Axles - Tipping hydraulics = More information = Axle configuration Tyre profile: 50% Brakes: drum brakes Bodpfoyft E Ajx Abbjwh Suspension: leaf suspension Front axle 1: Differential lock; Steering; Reduction: hub reduction Front axle 2: Differential lock; Steering; Reduction: hub reduction Rear axle 1: Double wheels; Differential lock; Reduction: hub reduction Rear axle 2: Double wheels; Differential lock; Reduction: hub reduction Functional Tipper: Back Condition Technical condition: good Visual appearance: good

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, Special price! The machine is immediately available for collection. Grinding worm specifications: Min/Max. outer diameter: 280/350 mm Width: 84/104 mm Max. module with restrictions: MOD 8.0 (DP 3.2) Bwodeyfnlkopfx Abbsh Number of starts: up to 3 with limitations Max. usable width (shift travel): 90 mm For detailed technical information, please refer to the attached PDF file. Accessories: Several Fässler diamond discs Dressing device Grinding stones Turbo separator

Condition: used, Year of construction: 2021, Exhibition unit (little used) Unit for cutting soft materials such as honeycomb cores, acoustic elements and fabrics using oscillating movements Processing options: Cutting straight or radial cutouts Typical areas of application: • Textiles: Cutting fabrics or textiles (e.g. leather, felt, etc.) • Cutting honeycomb cores for doors, staircase construction, exhibition stand construction, caravan construction • Acoustic elements: Cutting polyester, foam or other sound-absorbing materials • Aviation, boat building, aerospace: Cutting honeycomb cores Technical specifications Max. input speed: 6,000 min-1 Max. output speed: 9,000 min-1 Gear ratio: 1:1.48 Max. torque: 8 Nm Permissible operating temperature: max. 85°C Position of the torque arm to the tool: 360° Processing angle: 0° Number of tool outputs: 1 / fixed Lubrication: Grease / lifetime grease filling Amplitude: 4 mm Frequency: 150 Hz Storage location: Garbsen Bwjdpfx Aovvi Iqjbbjh

Condition: like new (used), functionality: fully functional, Year of construction: 2015, operating hours: 27 h, laser power: 4,000 W, 3D cutting system Solidcutter 100/125 D PBusII Bwjdpfx Abeuf S Sxjbeh

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 30000452, travel distance X-axis: 300 mm, travel distance Y-axis: 150 mm, travel distance Z-axis: 340 mm, quill travel distance: 60 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, table length: 600 mm, table width: 210 mm, overall weight: 710 kg, table load: 200 kg, Equipment: documentation/manual, DECKEL FP1 – completely overhauled in 2012 by FPS (Germany), equipped with Heidenhain digital display, tool cabinet with accessories, and dividing head. Since the overhaul, the machine has seen very light use and is therefore in like-new condition. About FPS: Specialized in the complete refurbishment of DECKEL machines. MANUFACTURER: DECKEL MODEL: FP1 CONDITION: Overhauled (2012) – mechanically and electronically as new! LOCATION: Graz (Austria) IMAGES/VIDEOS: For additional photographs and videos of the machine in operation, please contact us. Description: This high-quality DECKEL FP1 milling machine has been completely refurbished, with both mechanical and electrical components upgraded to the latest standards. A new CE-compliant control cabinet was installed in accordance with current statutory requirements (BGVA 3 / DIN-EN 60204-1, new machinery standard). During the overhaul, the control system, drive package, and drive motors were all replaced and brought up to date. The modernization also included the installation of a new, touch-safe control panel and new motor. Technical data: Operation: manual, with option for automatic positioning Control: 3-axis Heidenhain digital readout Spindle speed range: 40 – 2000 rpm (geometrically stepped, 16 speed stages) Feed rate: 10 – 500 mm/min (stepless adjustment) Rapid traverse: 1.2 m/min (stepless adjustment) Quill: Vertical & horizontal extension 60 mm, SK40 Travel (X/Y/Z): 300 / 150 / 340 mm Table size: 600 × 210 mm Table load: max. 200 kg Machine weight: 710 kg incl. angle table and milling head Footprint: 1600 x 1400 x 1750 mm (W / D / H) Bodpfjxywhcjx Abbswh Equipment: Vertical and horizontal spindle Milling head manually swivels ± 90° Completely new electrics and drive packages Overhauled – mechanically and electronically as new Extras: Z-axis bellows Special paintwork Highlights: Heidenhain digital readout for precise operation During overhaul, entire control system, drive package, and drive motors were renewed Contact us to arrange a viewing appointment.

Condition: good (used), Year of construction: 2005, operating hours: 114,129 h, functionality: fully functional, machine/vehicle number: 2820, Sale only within Germany Control System: Siemens Sinumerik Software: Haas Software 7.3 Number of Axes: 6 (X, X3, Y, Z, C, A) Grinding Spindle: - Continuously variable up to 8,000 rpm - Haas short taper - Grinding wheel diameter max. Ø200 mm Workpiece Spindle: - Up to 1,000 rpm - Centre height 175 mm - Clamping collet 3409 - Taper mount SK50 - Through bore Ø28.5 mm - Workpiece weight up to 2.5 kg - Indexing accuracy +/- 3.5 arcseconds - Input increment 0.001° Workpiece Support: Linear axis X3 with bushing holder Feed Drives: - Linear axes with ball screw spindles - Direct length measurement with 0.0001 mm resolution Workpiece Dimensions (Drills): - Ø 0.8 - 15.0 mm - Overall length 20 - 380 mm - Grinding length 10 - 360 mm - Max. workpiece weight 2.5 kg Chain Magazine: - 42 stations - Ø 0.8 - 15.0 mm - Length 80 - 250 mm - Max. workpiece weight 1.5 kg Stack Magazine: - Preparation for stack magazine for indexable inserts Measuring System CCD Area Camera: - Indexing and positioning of tools by coolant channel (from Ø0.8 mm) - Measurement of opening angle - Indexing of multi-groove drilling and reaming tools Renishaw Probe: - Touch-off for workpiece length/tool tip - Scanning of groove pitch - Positioning in coolant channel bore at tool tip Electrical Connection: - 63A main fuse - Mains voltage 400V - Frequency 50 Hz - Control voltage 24V - Rated power 21 kW Weight: 8 t Including: - Control cabinet cooling: water-water heat exchanger - Fire protection system: Kraft und Bauer extinguishing system - Extraction unit: Büchel Smog-Hog SH 2000/T - Dressing unit (stationary dresser) - Pressure plate ----- Operating Procedure – For Drills: - Manual loading of chain magazine outside machine enclosure - Automated workpiece handling system - Automatic collet chuck clamping - Workpiece positioning in the working area - Workpiece machining - Automatic return of workpieces onto powered conveyor belt Operating Procedure – For Solid Carbide Indexable Inserts: - Manual loading of stack magazine inside working area - Automated workpiece handling system - Automatic clamping with special clamping fixture - Workpiece positioning in the working area - Workpiece machining - Automatic return of processed workpieces onto storage system Drill Grinding: - Grinding of flute profile - Grinding of cutting edge - Grinding of circumference profile - Grinding of relief chamfer - Grinding of periphery chamfer - Cylindrical grinding Indexable Insert Grinding: - Grinding of support face and pin ----- Two additional identical machines are also available for sale! Bwsdpfewpqkrex Abboh

Condition: ready for operation (used), Year of construction: 2004, operating hours: 78,000 h, functionality: fully functional, machine/vehicle number: 216028, Sale only within Germany CNC Grinding Center UW I D With 5 controlled axes: X, Y, Z, A, B And fully automatic grinding wheel changer Control system: NUM 1050 M with PC Center height: 195 mm Max. tool diameter: 250 mm Grinding table X-axis Longitudinal travel: 625 mm Usable table area: 900 mm x 185 mm Bwjdpfxsx Hwyhj Abbsh Cross slide Z-axis Cross travel: 305 mm Vertical slide Y-axis Vertical stroke: 305 mm Grinding head B-axis Swivels 240° Grinding wheel mount: HSK-C50 Spindle speed: 2,000 – 23,000 rpm Workpiece carrier A-axis Mount: ISO 50 Max. speed: 600 rpm A, X, Y, Z axes with direct measurement system B-axis with indirect measurement system Renishaw 3D measuring probe permanently mounted on grinding head Grinding wheel changer with 8 stations incl. 4 additional coolant nozzles Additional CNC-controlled slide unit (W-axis) Longitudinal travel: 380 mm Hydraulic vertical stroke: 40 mm Mounted on the grinding table For use with steady rest or tailstock 78,000 spindle hours 105,000 power-on hours Includes Kraft+Bauer fire extinguishing system Note: Another identical machine is also available for sale.

Condition: excellent (used), Year of construction: 1992, max. wheel diameter 130 mm gear width 400 mm max. module 3 min. module 0,5 Control Bosch CC 220 milling spindle speeds (infinitely variable) 300 - 1200 U/min clamping length max. 1160 mm swivel angle for work spindle +/- 45 ° x-travel 230 mm y-travel 170 mm z-travel 400 mm spindle speeds 1 - 125 mm total power requirement 52 kW Bodpfx Aboyb S R Asbewh weight of the machine ca. 7,5 t dimensions of the machine ca. 4,8 x 3,8 x 2,5 m Machine in very nice condition!

Condition: excellent (used), workpiece diameter 10 - 250 mm threading length 900 mm Bwodeyb S Riepfx Abboh thread pitch 0,3 - 100 mm spindle turning speed range 72 / 1700 - 2540 U/min relief of the tap 0,03 - 8 mm clamping length max. 1190 mm max. module 10 workpiece turning speeds 0,4 - 160 U/min total power requirement 13 kW weight of the machine ca. 7,4 t dimensions of the machine ca. 4,5 x 2,0 x 2,1 m Many accessories.

Condition: used, Year of construction: 1979, max. wheel diameter 1000 mm gear width 180 mm max. module 7 min. module 0,5 min. ram stroke 16 mm max. ram stroke 180 mm table hole 160 mm total power requirement 4 kW weight of the machine ca. 5,2 t Bwodpfx Aoyb S H Dsbboh

Condition: good (used), Year of construction: 1975, max. wheel diameter 630 mm y-travel 560 mm gear width 180 mm max. module 8 min. module 1 workpiece dia. 750 mm table diameter 450 mm draw-in arbor diameter 58 mm spindle stroke 200 mm adjustment range 230 mm Bjdpfxjyb Sx Ts Abbewh distance between table/spindle 225-450 mm taper Morse 4 down feeds 0,03 mm/Hub roll feed 10n: 0,18-0,74 mm/Hub no. of strokes 12n: 47-300 Hub/min electrics - voltage/frequency 380/50 V/Hz weight of the machine ca. 5500 kg The machine was raised by 100 mm.