Used Work Table for sale (55,744)

Condition: excellent (used), functionality: fully functional, Swivel spindle milling machine KÖLLE F 45 in very good condition; this machine comes from an assembly company and has been idle for the last few years, as it was no longer needed. Everything functions perfectly. All bearings and guides are in good condition; the machine runs very smoothly. Year of manufacture: 1990 with control panel on top Both fence jaws on the milling fence can be adjusted in depth, with fine adjustment and scale, allowing for planing work, e.g., on a gluing profile. The entire milling fence can also be adjusted in depth using a handwheel and a leadscrew, enabling very precise and fast adjustments. with AIGNER integral fence with spindle locking lever Chips can be removed very effectively with 2 extraction ports, 125 mm on the milling fence and 100 mm on the machine table. with 30 mm spindle, which can be swiveled steplessly from -5 to 45°; the spindle is swiveled electrically with a very precise display; fine adjustment can be made manually with a handwheel. The height adjustment is also electric, and a handwheel is also available for fine adjustment. with right/left rotation We will personally deliver and demonstrate the machine anywhere in Germany for €220.00, so you have no risk when purchasing; shipping to Austria and the rest of the EU is also possible upon request. with a large table opening of 375 mm, which can be reduced by using various rings (this allows for the use of cutters with a very large diameter, and you can also safely mill with small cutters). with 3000, 4000, 5000, 6000, 8000 and 10000 rpm the table is made of heavily ribbed cast iron with 30 mm spindle in the machine; another spindle can also be installed very robust and durable design; the machine was built for heavy-duty milling operations and is suitable for all milling applications. optimal power transmission through belt drive with instruction manual with 3-roller feed system HOL HER, type ET 117 the feed system has right/left rotation and 8 speeds; the feed rollers are individually mounted and are all in new condition. the machine table is 1000 mm deep and 1200 mm wide; it has an extendable support table 1200 mm long. the machine is ready for immediate use. 380 V, 4700 and 5700 W due to the 2 speeds with all necessary safety devices, motor brake, and emergency stop switch; the machine is approved by the German Wood Trade Association (Holz-BG) and has the GS safety mark. Fpjdpfxezt Ai Ee Ak Uel the machine weighs approximately 1000 kg with motor protection switch against overload professional-grade machine, not a hardware store reject optimal, simple, fast, and safe operation

Condition: used, machine/vehicle number: 008703, X axis working area: 3650 mm Y axis working area: 1600 mm Working Table: Flat table Main Electrospindle power: 15 KW Number of controlled axes: 3 axes Total number of drilling spindles: 37 Fpodpfxjzq Ur Tj Ak Ujl Total number of tool changer positions: 18

Condition: used, Year of construction: 1976, functionality: fully functional, travel distance Y-axis: 3,500 mm, spindle diameter: 125 mm, travel distance W-axis: 800 mm, table load: 20,000 kg, table length: 2,000 mm, table width: 1,800 mm, type of input current: AC, WMW Union BFP 125 - Plate Type Horizontal Boring and Milling Machine, year of construction 1976 German-made heavy-duty plate type horizontal boring mill (Plattenbohrwerk). The complete electrical system has been fully renewed. The machine is well maintained and in full working condition. Technical data: Fedszz Shmspfx Ak Uopl - Spindle diameter: 125 mm - Rotary table: 2000 x 1800 mm, load capacity 20,000 kg - Spindle (quill) travel W: 800 mm - Vertical travel Y: 3500 mm - Floor plate dimensions: 9800 x 3750 mm The machine can be inspected under power at our facility in Dilovasi OSB, Kocaeli / Turkey. Price EXW Dilovasi. Loading assistance available.

Condition: like new (used), Year of construction: 2025, rotary table diameter: 1,000 mm, Equipment: rotational speed infinitely variable, - Horizontal load capacity: 1200 kg - Vertical load capacity: 600 kg Fpsdpfx Akezcyxqj Ujl - Table dimensions: 1000 mm - Electrically tiltable - Wireless remote control - Digital display - Documentation - 400V

Condition: used, machine/vehicle number: 008562, X axis working area: 2465 mm Y axis working area: 1260 mm Working Table: Flat table Fedpfxozvwils Ak Uepl Main Electrospindle power: 13.2 KW Number of controlled axes: 3 axes Total number of drilling spindles: 10 Total number of tool changer positions: 16

Condition: good (used), Year of construction: 2008, functionality: fully functional, The Depo/ZPS machining center features an overhead gantry, meaning that all machine movements are performed by the tool. As a result, the mass of the workpiece and clamping device remains constant during machining. Year of manufacture: 2008 Spindle hours approx. 3,500 h (after spindle replacement in 2023) Control system: - Heidenhain iTNC 530 - Heidenhain HR 410 handwheel - Swiveling control panel with 15.1" monitor - Integrated Ethernet interface Technical Data Travel ranges: X 1,000 mm, Y 900 mm, Z 600 mm Work table: - 1,200 mm x 1,000 mm - Max. workpiece weight: 3,000 kg - Max. workpiece size: 1,000 mm x 800 mm x 700 mm Milling spindle: - Continuous power: 30 kW - Speed range: 1-18,000 rpm - Torque S1/100%: 80 Nm - Tool holder: HSK 63 form A - Main spindle jacket cooling - Air through spindle center for tool cooling (ILZ) - Coolant with 40 bar through the spindle (IKZ) Axes feed rates: - X, Y, Z axis feed up to 40 m/min - X, Y, Z axis rapid traverse up to 40 m/min Tool changer with double-arm gripper: - Number of tools in drum magazine (outside working area): 38 - Max. tool diameter: 80/115 mm - Max. tool length: 250 mm Tool and workpiece measurement for automatic tool and part size adjustment: - Tool radius and length measurement - Tool breakage detection - Blum laser for component measurement (Inspect) Disposal system: - Gooseneck slat conveyor - (Chip cart to be provided by buyer) Additional equipment: - Minimum quantity lubrication Minibooster 2 - Machine enclosure with full-area protective covers - Crane loading possible by unhooking the chip protection device at the front - Workspace lighting with two fluorescent lamps on the side walls Fedpjy Hp Rrofx Ak Ujpl Machine data: - Space requirement including service areas (LxWxH): approx. 5,000 mm x 4,220 mm x 3,830 mm - Machine weight incl. additional units: approx. 13,000 kg - Connected load: 45 kVA, 400V, 50 Hz This machining center is located in a precision tool and mold making shop. It is exceptionally well-equipped with practical features and is in very good condition. The Depo/ZPS Dynamic 1009 operates precisely and reliably. There is no maintenance or repair backlog.

Condition: good (used), Year of construction: 1986, machine/vehicle number: 205891, Offer 25396 Technical Specifications: Fodsx Tqblspfx Ak Uopl - Load capacity: 250 kg - Faceplate diameter: 600 mm - Table height in horizontal position: 910 mm - Faceplate continuously tiltable by hand crank - Faceplate rotational speed electrically variable: 0.2 – 2 rpm - Welding current transmission: 300 A - Drive: 220 V - Right and left rotation - Electric foot switch - Space requirement: approx. W 800 x H 910 x D 1,200 mm - Weight: approx. 150 kg

Condition: ready for operation (used), Year of construction: 2026, functionality: fully functional, table width: 1,000 mm, table length: 2,000 mm, plate height: 15 mm, TECHNICAL DETAILS Table length: 2,000 mm Table width: 1,000 mm Table top thickness: 15 mm MACHINE DETAILS Material: Hardened metal Dimensions (L x W x H): 2,000 x 1,000 x 500 mm Fpjdpfxezxcmhj Ak Ujl

Condition: used, Year of construction: 1987, machine/vehicle number: 015988798960, Item No. 26303 Technical Data: - Punching force: 700 kN - Punching capacity, e.g.: up to 30 mm diameter in steel, 20 mm - Or with special punching unit: up to 150 mm diameter in steel, 4.0 mm - Stroke adjustable in steps: 0 to 75 mm - Stroke rate: 13 to 48 strokes/min - Overhang: 760 mm - Installation height: 240 mm - Working height: 1040 mm - Drive: 400V / 8.5 kW - Space requirement: approx. W 750 x H 1900 x D 1750 mm - Weight: approx. 1650 kg - Includes: - Foot switch - Center-finding device - Support table with stops and scales Fpodpezzzi Hjfx Ak Ujl

Condition: good (used), Year of construction: 1982, machine/vehicle number: 1501-2, Offer 26128 Technical Data: - Max. load capacity in horizontal position: 5000 kg - Faceplate diameter: 1150 mm - Faceplate motorized tilting: 0 - 130° - Rotary movement electronically steplessly adjustable - Right and left rotation - Welding current transmission: approx. 500 A - Drive: 400 V - Table height in horizontal position: approx. 1220 mm - Handheld remote control - Required space: approx. W 1350 x H 1220 x D 1900 mm - Weight: approx. 3500 kg - Adapter plate with clamping device for round material Fpodpey Ec Emsfx Ak Uol

Condition: good (used), Year of construction: 2005, machine/vehicle number: AA1/014879, functionality: fully functional, input voltage: 400 V, input current: 106 A, input frequency: 50 Hz, type of input current: three-phase, We offer this very good SCM RECORD 110 AL machining center, year of construction – 2005. Serial number: AA1/014879 Machine number: 2966282040H Reference: 052635 Supply voltage: 400 V Number of phases: 3 Operating current: 106 A Fsdpfx Aszua Tdek Uepl Short-circuit current rating: 10 kA Frequency: 50 Hz TECHNICAL DETAILS Processing type: Drilling, milling Working area X-axis: 3,060 mm Working area Y-axis: 1,240 mm Max. panel passage: 200 mm Number of working fields: 2 Table type: Flat table Table configuration: Nesting Table length: 3,060 mm Table width: 1,240 mm Number of controlled axes: 5 Drilling unit Number of drilling units: 1 Installation position: top Vertical drilling spindles: 12 Horizontal drilling spindles X-direction: 4 Horizontal drilling spindles Y-direction: 2 Total number of drilling spindles: 18 Milling spindle Number of milling spindles: 1 Installation position: top Controlled axes: 5 Spindle cooling: liquid cooling Grooving unit Number of grooving units: 1 Installation position: top Design: fixed grooving unit Grooving direction: X-direction If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2008, machine/vehicle number: 81266- V 80381, Lg.no. 24394 Hydr. rotary and tilting welding table - Four-axis welding manipulator Fsdpfx Akeugtiuj Uepl Technical data: - max. load capacity 15000 kg - Face plate dimensions 2990 x 2990 mm - min. Table height in horizontal position approx. 1070 mm - Face plate can be rotated + swiveled or tilted - Faceplate can be moved horizontally + vertically, travel 1250 mm - Rotation electr. infinitely variable - Right + left rotation - Welding current transmission approx. 700 A - Drive 400 V - Connected load 33.0 kW - Manual remote control for speed regulation - E. foot switch - Space requirement approx. W 2990 x H 1070 x D 5500 mm - Weight approx. 12500 kg

Condition: reconditioned (used), QUASER MV204 CNC Vertical Machining Centre Year 2016 Control FANUC 31i-B Table size 700 x 1400 mm Table load 1800 kg Travels XYZ 1270 x 700 x 610 mm Spindle nose to table 150 - 750 mm Spindle speeds to 12000 rpm Spindle taper BT 40 Spindle motor TBC Number of tools 30 ATC Rapid traverse X, Y, Z 36 m/min Weight 10100 kg Supplied with: Swarf Conveyor, Spindle Chiller, Filtermist FX7002, Tooling Package. For sale with Jet Machinery Ltd Jet Machinery Stock No: #27001 Machine Serial Number: 113L160588 Cost: £34,950.00 + VAT Fpedpfxszzymko Ak Ujl Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 1967, Year of Manufacture: 1967 Machine / Serial No.: 72882 Country of Manufacture: Germany Manufacturer: Praehomawerk Kehren & Co., Hennef/Sieg Model: RW 6 Machine type: Rotary table surface grinding machine Grinding method: Surface grinding with rotary table Fodpfx Aezvfi Hok Uspl Grinding spindle arrangement: Horizontal spindle Control: Conventional / manual Rotary table diameter: 600 mm Magnetic chuck: Electromagnetic rotary table Grinding height: approx. 350 mm Maximum workpiece diameter: approx. 650 mm Grinding wheel diameter: approx. 400 mm Grinding spindle speed: up to approx. 3,000 rpm Grinding spindle motor power: approx. 5.5–7.5 kW Vertical adjustment: Manual / powered vertical adjustment Table rotation: Powered rotary table Coolant system: Included Grinding wheel dressing: Manual dressing arrangement Machine operation: Conventional push-button control Operating hours shown: approx. 11,350 h Machine length: approx. 2,500–3,000 mm Machine width: approx. 2,000–2,300 mm Machine height: approx. 2,700–3,000 mm Machine weight: approx. 3,500 kg

Condition: used, Year of construction: 2010, table length 2000 mm table width 1800 mm Fpodpfxeztrvno Ak Uol table load 12,5 t longitudinal adjustment 1250 mm longitudinal feeds of table 0,63-2000 mm/min table height 920 mm groove width 36 mm Control moviaxes SEW total power requirement 10 kW weight of the machine ca. 7,5 t dimensions of the machine ca. 3,7 x 2,1 x 1 m

Condition: used, Year of construction: 1982, spindle diameter 90 mm x-travel 900 mm y-travel 900 mm z-axis 1200 mm w-axis 800 mm table surface area 900 x 1200 mm rotation movement 360 Grad table load 6,0 t turning speeds 25 - 1400 U/min spindle taper ISO 40 voltage 380 V / 50 Hz drive milling spindle 9,2 kW total power requirement 35 KVA weight of the machine ca. 10 t dimensions of the machine ca. 4,5 x 2,8 x 2,5 m • Machine had been completely refurbished in 1994 by the manufacturer • new switch cabinet, • new Servo-drive BOSCH and HEIDENHAIN-control TNC 360,(3D control) • valve plate Ø 600 mm. • traverse distance: 150 mm The machine is currently not ready for demonstration due to a fault in the electrical system. Fpedpjtv H Ucefx Ak Uol

Condition: refurbished (used), Year of construction: 2007, VIDEOS AVAILABLE ON REQUEST UNION CBFK 130/2 CNC Table Type Horizontal Boring & Milling Machine Manufacturer: UNION Gera (VEB Werkzeugmaschinenfabrik UNION Gera) Model: CBFK 130/2 Control: Heidenhain CNC Machine type: CNC Table Type Horizontal Boring & Milling Machine Travels X-axis: 3,000 mm Y-axis: 1,600 mm Z-axis: 1,275 mm W-axis (spindle quill): 400 mm B-axis (rotary table): 360° Table Table size: 1,600 × 2,000 mm Maximum workpiece weight: 7,000 kg Main Drive Main spindle motor: 32.4 kW Electrical Data Connected load: 80 kW Supply voltage: 380 V Frequency: 50 Hz Control voltage: 220/24 V Auxiliary voltage: 220/15 V Rated machine current: 150 A Recommended fuse: 200 A Operating temperature: 15–35 °C Machine Weight Approximate machine weight: 28.3 tonnes Year Originally manufactured: (not shown on plate) General overhaul: 2007 Machine Identification Model: CBFK 130/2 Serial number: 12266 Operating Hours (Heidenhain) Control ON: 112,694 h Machine ON: 100,869 h Fedpszqbg Dofx Ak Uspl Program running time: 22,209 h Spindle running time: 18,280 h

Condition: good (used), Year of construction: 1992, machine/vehicle number: 181192, Offer 24037 Hydraulic welding rotary and tilting table – three axes - welding manipulator Technical data: - max. load capacity 150 kg - faceplate diameter 800 - min. table height in horizontal position approx. 600 mm Fpedpfev Hcabjx Ak Uel - max. table height in horizontal position approx. 1100 mm - faceplate can be swiveled or tilted hydraulically - faceplate rotates clockwise and counterclockwise - rotary movement can be controlled electrically hydraulically - welding current transmission approx. 500 A - drive 400 V - connected load approx. 0.75 kW - space requirement approx. W 1700 x H 1450 x D 1000 mm - weight approx. 900 kg

Condition: excellent (used), RUWI Kombi-Unterflurfräse – Professional Under Table Router – Made in Germany Manufacturer: RUWI GmbH (Germany) Model: Kombi-Unterflurfräse Year of manufacture: 2013 Power supply: 230 V / 50 Hz Price: €1,750 (Negotiable) Professional RUWI under-table router, manufactured in Germany. A robust and precise machine designed for professional woodworking, furniture production and joinery workshops. Features • Original RUWI machine • Heavy-duty steel construction • 230 V power supply • Smooth and precise operation • Suitable for profiling, grooving, edge shaping and general routing work • Compact design with high stability • Made in Germany Condition • Fully functional and ready to work. • Well maintained. • Can be inspected and tested before purchase. Fodpfx Akezmunyj Uspl

Condition: used, Year of construction: 1981, total length: 3,750 mm, total width: 2,250 mm, total height: 1,700 mm, Colour: Grey Weight: 5.500 kg - Year: 1981 - Documentation available: No - CE certificate present: No - Serial number: B5896 - Drive system: Conventional - Drive type: Hydraulic - Power [kW]: 11.0 - Max. sheet thickness [mm]: 6 - Max. working width [mm]: 3100 - Backgauge type: Electric - Backgauge depth [mm]: 1100 - Sheet support system: None - Finger guard: Fixed Fpjdpjyf Hhwofx Ak Usl - Angle adjustment: Manual - Blade gap adjustment: Manual - Table type: Standard table - Transport dimensions: 3750mm x 2250mm x 1700mm (l x w x h) - Transport weight [kg]: 5500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 31-44336, travel distance X-axis: 630 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, workpiece weight (max.): 500 kg, spindle speed (max.): 24,000 rpm, No minimum price – guaranteed sale to the highest bidder! The machine spindle has been completely overhauled! TECHNICAL DETAILS Travel range X-axis: 630 mm Travel range Y-axis: 630 mm Travel range Z-axis: 630 mm Pallet size: 400 × 500 mm Number of pallets: 6 Pallet change time: 9 s Max. workpiece size: 720 × 800 mm Max. workpiece weight: 500 kg NC rotary table: B-axis B-axis rotation range: 360,000 × 0.001° B-axis rotation speed: 40 rpm Tool holder: SK 63 Max. tool diameter: 150 mm Max. tool length: 227 mm Max. tool weight: 12 kg Spindle speed: 45–24,000 rpm Spindle torque: 48/72 Nm Fpjdpfx Akszwd Htj Ujl Spindle drive: 30 kW Feed rate X/Y/Z: 1–60,000 mm/min Rapid traverse X/Y/Z: 60,000 mm/min Feed force: 10,000 Nm MACHINE DETAILS Total connected load: approx. 60 kW Connection voltage: 400 V Mains frequency: 50 Hz Total weight: approx. 12,500 kg EQUIPMENT Chip conveyor Documentation/Manual

Condition: used, Year of construction: 1990, machine/vehicle number: 90-10-175, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 380 V, saw blade diameter: 450 mm, height adjustment type: mechanical, actuation type: manual, Equipment: saw blade guard, Altendorf table saw, model F-90, as shown in the photo. Year of manufacture: 1990. The saw is being sold because it has been replaced by a new one. It is still in perfect working order. It will be transported on a wooden pallet and can be loaded onto a truck using a forklift on site. Sold as is, no warranty. Fsdpjzq Srqefx Ak Uopl

Year of construction: 2017, condition: used, overall weight: 45,000 kg, total length: 8,500 mm, total width: 6,500 mm, total height: 5,400 mm, Technical data (XYZ): X 3500 mm / Y 2500 mm / Z 1700 mm Control: HEIDENHAIN iTNC 530 Miscellaneous: 40-tool changer, spindle Ø130 mm, 3000 rpm, T-slot clamping table 2400 × 2000 mm, spindle extension 730 mm, chip conveyor, coolant system with filter unit, separate cooling unit, protective fence enclosure. Travel X-axis: 3500 - mm Dimensions (LxWxH) approx.: 8500 x 6500 x 5400 mm Travel Y-axis: 2500 - mm Weight approx.: 45,000 kg Travel Z-axis: 1700 - mm Year of construction: 2,017 Condition: in working order Fpedpfxozwtaij Ak Uol Terms of payment: 100% prepayment before pick-up Terms of delivery: EXW EX Works under power: No

Condition: excellent (used), C.N.C. WORKING CENTER 3 axes (X-Y-Z) Safety enclosure on the working head - Side safety metal grids - Front emergency carpets Fjdpfjzy Ngwjx Ak Ujpl The following technical data are ESTIMATED and are not BINDING: Numerical Control with Software Biesse Works - Workpieces dimensions (workable panels): - Length: mm 90 - 3000 x Width: mm 70 - 1000 x Thickness: mm 8-60 (for longer panels than mm 2000, minimum thickness is mm 13) - No. 2 Grippers to keep fix the workpieces during process and 1 in-feed table (with air-blowing) - No. 1 Out-feed table, with motorized conveyoring belts BOTTOM WORKING UNITS: - No. 1 Vertical electro-spindle HSK D-50 (power HP 4.8) with Inverter - No. 1 Circular Grooving Saw (on X axe) dia. mm 150, power HP 2,3 with Inverter - No. 29 Vertical drilling spindles - No. 10 Horizontal drilling spindles (8 in X axe + 2 in Y axe) TOP WORKING UNITS: - No. 1 Vertical electro-spindle HSK D-50 (power HP 4.8) with Inverter - No. 1 Circular Grooving Saw (on X axe) dia. mm 150, power HP 2,3 with Inverter - No. 29 Vertical drilling spindles - No. 10 Horizontal drilling spindles (8 in X axe + 2 in Y axe)

Condition: used, functionality: fully functional, On offer: SAC RTE 1000 wide belt sander, with pressure shoe The machine is used, has undergone technical inspection, is fully functional, and ready for operation. Before purchase, it can be started and thoroughly inspected at our company's premises. The machine's greatest advantage is its ability to calibrate and precisely finish-sand. The unit with a hard rubber roller is responsible for leveling the surface, and the pneumatic pressure shoe with a "creep feed" function allows for precise finishing of the component. The two-speed motor and two conveyor speeds allow the operating parameters to be adjusted to the material being processed. Specifications: • Manufacturer: SAC • Model: RTE 1000 • Working width: 1000 mm • Maximum height of the workpiece: 165 mm • Number of sanding units: 2 • One combined unit: hard rubber roller, 160 mm diameter + pressure shoe • Pneumatic pressure shoe with "creep feed" function • Main two-speed motor: 10 / 12 kW • Number of conveyor speeds: 2 • Electric adjustment of the work table height • Abrasive belt blowing system • Abrasive belt dimensions: 1900 × 1000 mm • Dust extraction port: Ø200 mm • Overall dimensions: 145 × 210 × 190 cm (L × W × H, without the guard) Applications: • Calibrating and leveling solid wood components • Sanding panels and glued components • Inter-operation sanding • Precise finishing sanding using the pressure shoe • Processing components with a width of up to 1000 mm and a height of up to 165 mm • Preparing surfaces for lacquering, oiling, or further processing Additional information: • The photos show the actual condition of the machine being offered • Free machine operation training at our company's premises • The price stated in the auction applies to export/intra-community sales with a VAT rate of 0%; for domestic sales, 23% VAT will be added. Financing and transport: Fpsdpszvuy Iofx Ak Uel • We arrange transport with our MDD fleet or through external carriers • We assist in obtaining a lease or leasing loan • The delivery cost depends on the destination and the method of transporting the machine.