Used Work Table for sale (77,683)

Condition: excellent (used), Note: The pictures serve to clarify the material. - The workbench frames are commissioned unassembled; - The production time is usually approx. 3 - 5 working days. Basic dimensions: Width: approx. 3,200 mm Height: approx. 940 mm Depth: approx. 850 mm The scope of delivery includes: 04x square tube, used Material color: sendzimir galvanized Profile height: approx. 900 mm Square profile: 140 x 140 x 4 mm Drill hole grid: 75 x 50 mm Drill hole Ø: 13 mm 02x CS Sigma profile, used Material color: sendzimir galvanized CS Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 2,900 mm 02x CS Sigma profile, used Material color: sendzimir galvanized CS Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 550 mm 01x chipboard, used Chipboard thickness: 38 mm Chipboard width: approx. 3,000 mm Depth of chipboard: approx. 850 mm Surface: possibly coated (two-piece if necessary) 08x Mounting bracket, new Finish: sendzimir galvanized Dimensions: approx. 140 x 275 x 105 mm (DxWxH) Hole spacing outside: approx. 250 mm Hole spacing inside: approx. 130 mm Hole diameter: approx. 13 mm Material thickness: 3.00 mm Self-drilling screws, new Finish: galvanized Dimensions: 6.3 x 70 mm 32x screws: M12 32x nuts: M12 32x washers: M12 Ljdpfx Afetk Iwasfohr Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: like new (used), Year of construction: 2019, Arburg 1200 T 2000-800 Clamping unit 2000T Table diameter: 1200mm Angle rotation: 180 degrees Clamping force: 200 tons Opening force max. kN/mm: 115/500 Injection unit Screw diameter: 45 mm Shot volume: 318 cm3 Shot weight: 291 g Injection pressure: 2470 bar Lodpfx Aswugczoffjhr 1. Model: T model 2. Machine type: 1200 T 2000 - 800 3. Plasticizing unit: Thermoplastics cylinder 45 mm, highly wear-resistant 4. Screw: Reinforced screw coupling for splined coupling geometry 5. Control system: SELOGICA ‘direct’ controller 6. Technology stage: Stage 2 servo-regulated with 2 control pumps 7. Rotary table: Advanced ergonomics special model, 2-station 180° forward/backward alternating 8. Nozzle: Open nozzle 45 mm with nozzle tip 9. In-mould needle nozzles: Electric & hydraulic control for needle nozzle 1, electric & pneumatic control for needle nozzle 2 10. Heating: Heater band for open nozzle, 9 electric heating control circuits for mould heating 11. Clamping platen: Mould mounting platen set, central diameter 125 mm 12. Blow unit: Mould blow unit with pressure reducer at station 1 13. Safety: Optical barrier at loading station, continuous oil cooling and filtration 14. Hopper: Adapter (extension) for feed hopper, machine delivered without 50 L hopper 15. Robot interface: Interface for robot system for station 2 & 3 (based on EM67/1) 16. Electric axes: Basic equipment for electric axes control 17. I/O: 4 programmable inputs/outputs on terminal rail 18. Sockets: Additional socket combination (1 CEE, 1 Schuko) 19. Interfaces: Temperature control device interface (REGLOPLAS), printer USB interface, Compact Flash, EUROMAP 65 chip card user authorisation 20. Acoustic alarm: Error alarm acoustic signal 21. Safety interlock: Interface for safety interlock of door (EUROMAP 73) 22. Cooling circuits: 3 regulated machine-related cooling circuits with flow indicator, 3 manually adjustable cooling circuits for second water manifold 23. Anti-corrosion: Anti-corrosion treatment for rotary table, sealing lip on outer diameter 24. Manual & labels: CD operating manual & spare parts list, Slovak language labels 25. Machine feet: Anti-vibration footplates 26. Other: Hydraulic ejector, external cycle start key, standard equipment packages, new ARBURG colour scheme 27. Display languages: IT/EN/SK

Condition: used, Workshop-overhauled Surface Grinding Machine GEIBEL & HOTZ Type FS 60 AC Machine no. 2012190398 Year of manufacture 1998 - 2025 Workshop overhauled by Stange Werkzeugmaschinen in 2025 Electro-magnetic chuck 600 x 400 mm Table clamping area 960/620 x 400 mm Table longitudinal travel max. 660 mm Grinding width 400 mm Cross travel with automatic feed max. 400 mm Cross travel manual adjustment max. 425 mm Distance spindle center to magnetic chuck max. 425 mm Table speed 2 - 28 m/min stepless Grinding wheel dimensions Ø 300 x 50 x 76 mm Manual vertical feed 1 division = 0.002 mm Manual cross feed 1 division = 0.01 mm Electrical connection 400 Volt, 50 Hz. - Electro-magnetic chuck GEIBEL & HOTZ, Type HPM 600 x 400, height 99 mm - Automatic depth infeed for surface and plunge grinding with digital actual value display - Depth infeed setting via decade switches - Cross feed for surface grinding motorized or manual via hand wheel - Hydraulic table longitudinal travel - Central lubrication for table longitudinal travel, Y and Z axis movements, and lead screws - Mounted grinding wheel Ø 300 mm (usable Ø 290 mm) - Separate electrical cabinet - Hydraulic unit integrated into machine base - Coolant system with paper band filter - Machine mounted on transport pallet for shipping Space requirements (L x W x H) 2850 x 2250 x 2500 mm Space requirements (L x W x H) 3000 x 2400 x 2500 mm Lhsdjw Hhbcopfx Affor Weight approx. 2 tons (complete) Very good condition – workshop overhauled by Stange Werkzeugmaschinen

Condition: reconditioned (used), functionality: fully functional, input voltage: 400 V, warranty duration: 3 months, working width: 750 mm, total width: 750 mm, total length: 750 mm, total height: 870 mm, DGUV certified until: 12/2026, type of input current: three-phase, overall weight: 110 kg, year of last overhaul: 2025, Turntable for seeds Fortune DT stainless steel version Shelf below for seed disc Machined mobile Connection 400V, 1 kW, 16A-CEE plug Used machine cleaned Lodpfxjid Enwj Affshr 6 months warranty Visit our large bakery machine center!

Condition: good (used), Platform size: 1200 x 900 mm Lhsdpfjpy Duvjx Affjr

Condition: excellent (used), I sell the 2+2-head CNC working centre COSMEC NR/6. Lhjdpfx Afjfh Hadefjr Flat nesting table. Working field 2500x1500mm 3 pumps BOSCH CNC Alpha 3/3 control system. Very good condition. Possible to try. Available immediately.

Condition: excellent (used), The scope of delivery includes: 02x workbench stand, used Material color: sendzimir galvanized frame profile: 90 x 75 x 2,00 mm stand height: 900 mm stand depth: 800 mm Incl. cross and diagonal braces, foot plates The stands are pre-assembled Lhedpfx Afsi Ewqrofjr ( screwed truss ) 04x workbench crossbars, used Material color: RAL 7035 light gray box profile: 80 x 40 mm Traversentyp: TRV1-240-084-30CE clear width: 2.400 mm 08x safety pins, new finish: completely galvanized 01x chipboard II. choice, used thickness chipboard: 38 mm width chipboard: 2.580 mm depth chipboard: 800 mm surface: coated if necessary (if necessary in two parts) 01x Chipboard II. Choice, used thickness chipboard: 38 mm width chipboard: 2.380 mm depth chipboard: 800 mm surface: coated if necessary (if necessary in two parts) 16x drilling screws, new finish: galvanized dimensions: 6,3 x 70 mm The pictures are for clarification of the material. The material color may differ if necessary. The chipboards can be coated or uncoated. - The workbenches are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually about 5 working days.

Condition: ready for operation (used), Height-adjustable workbench with parallel vice, make "WERKSTOCK" with various exchangeable clamping jaws table rotatable, size: 650 x 650 mm Height adjustment: 750 - 1200 mm vice jaw width: 130 mm Clamping width: 150 mm Lhsdpfxodyp R Hs Affjr

Year of construction: 2016, condition: ready for operation (used), Twelve identical assembly tables are available. Length: 2020mm, width: 82mm, height: 240mm. No defects known, one of the tables has a newer worktop, without documentation. An on-site inspection is possible. Lsdpfxoxcx A He Affshr

Condition: used, Clamping plate, machine table with metal base Clamping table, assembly table, clamping angle plate Clamping surface: 1200 x 370 mm T-slot spacing: 90 mm Table height: 870 mm Lodpfxowkvi Nj Affehr - The T-slot table was originally a machine table from a milling machine - 4 T-slots, 16 mm - Metal base with height-adjustable feet - Multilayer wood plate L x W x H 1200 x 400 x 18 mm Overall dimensions L x W x H 1400 x 770 x 870 mm Weight: 250 kg good condition

Condition: ready for operation (used), Rotary Table, Table Rotator, Rotating Worktable , Used Machine Overall Dimensions: 1220x1220x325 mm Ljdpfx Afsv R Dwvjfjhr Weight: 549 kg Electrical Data: 240 V AC Worktable Size: 1220x1220 mm Table Rotation Direction: Bidirectional Table Rotation Speed: Infinitely adjustable Speed Limit: Adjustable

Condition: new, Year of construction: 2025, DT 1500 Grinding Table for Woodworking: Ljdpfx Afovugx Refjhr Table dimensions (without supporting grid): 1350 x 693 mm – This table area provides sufficient space for working, allowing for the processing of various elements. Supporting grid dimensions: 1440 x 800 mm – The supporting grid provides additional support for the processed materials, increasing stability and work precision. Maximum load capacity: The table is designed to withstand loads of up to 200 kg, enabling the processing of larger elements. Required dust extraction efficiency: The device requires a dust extraction system capable of processing at least 1500 cubic meters of air per hour to ensure proper ventilation and removal of contaminants. Table height adjustment: With height adjustment ranging from 735 to 995 mm, the user can tailor the device to their specific needs and preferences, enhancing work comfort. Application of the Grinding Table: This grinding table is an excellent tool for professional grinding operations in various sectors of the woodworking and furniture industries. The compact design of the workstation makes the product suitable for any workshop environment, enabling material processing, for example, before painting. Thanks to its high-quality construction and adjustable features, it allows for precise and effective work while maintaining appropriate safety standards. Technical Parameters: Length: 1570 mm Width/Depth: 1020 mm Height (adjustable): 735 - 995 mm Net weight: 73 kg Table dimensions (without supporting grid): 1350 x 693 mm Supporting grid dimensions: 1440 x 800 mm Maximum load capacity: 200 kg Required dust extraction efficiency: 1500 m³/h Dust extraction port diameter: 160 mm Note: The price quoted is the net price. It does not include transportation costs.

Condition: excellent (used), Note: The pictures serve to clarify the material. - The workbench frames are commissioned unassembled; - The production time is usually approx. 3 - 5 working days. Ljdpfx Afstk Iwpjfehr Basic dimensions: Width: approx. 2,750 mm Height: approx. 940 mm Depth: approx. 850 mm The scope of delivery includes: 04x square tube, used Material color: sendzimir galvanized Profile height: approx. 900 mm Square profile: 140 x 140 x 4 mm Drill hole grid: 75 x 50 mm Drill hole Ø: 13 mm 02x CS Sigma profile, used Material color: sendzimir galvanized CS Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 2,450 mm 02x CS Sigma profile, used Material color: sendzimir galvanized CS Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 550 mm 01x chipboard, used Chipboard thickness: 38 mm Chipboard width: approx. 2,750 mm Depth of chipboard: approx. 850 mm Surface: possibly coated (two-piece if necessary) 08x Mounting bracket, new Finish: sendzimir galvanized Dimensions: approx. 140 x 275 x 105 mm (DxWxH) Hole spacing outside: approx. 250 mm Hole spacing inside: approx. 130 mm Hole diameter: approx. 13 mm Material thickness: 3.00 mm Self-drilling screws, new Finish: galvanized Dimensions: 6.3 x 70 mm 32x screws: M12 32x nuts: M12 32x washers: M12 Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: new, Year of construction: 2025, Butterfly Table BS20 Randek butterfly table BS20 is an efficient tool when producing prefabricated walls, roofs, floors, gable ends in timber or steel frame. The tables can be used separate or placed in a line. High quality is achieved due to the clamping function that guarantees the squaring of the building component. The turning of the building element is done with a controlled automatic process. High productivity is achieved; the working table is optimized for prefabricated house production. Functional description: The following processes can be done in the working table / butterfly table: • Automatic turning of building component, the up raiser table raises and flips over the building component during a controlled process to the receiver table, and the building component is turned. • Squaring of building component, the pneumatically clamping function on the long side of the table presses the building component into a squared high quality building component. • The table is developed in order to efficiently perform the following processes: building of framework, put on and nail sheets, nailing of plastic of paper foil and insulation of building component. Technical description: • Length: Available in lengths of 6000, 7500, 9000 and 12000 mm • Width adjustment between 2250 – 3100 mm, the adjustment between different widths is easily done with a manual control • The tables are hydraulically appraisable up to 91 degrees • Pneumatically squaring function on the up raiser table on the long side, stoppers height 160 mm • The tables are covered with plywood sheets as far as technically possible, the sheets makes it possible to put on sub components and beams easily directly on the table • The tables are built in strong steel profiles • The working height of the tables is optimal 620 mm • Equipped with alongside c-profiles for possible placement of steer stoppers for beam placement • The tables are completely delivered ready for assembly with very simple installation process. The customer is responsible for supply of motor cover and switcher for hydraulic unit (3kW) • The tables are designed to make it possible to add a multi function working bridge with nailing or drilling function • The distance between the tables shall be approximately 1100 mm, depending on the thickness of the building component Security: • The machine is equipped with safety stop Ledpfs Nn Hyex Affohr CE-marked Benefits: • Squared building components due to clamping function • Controlled and automatic turning of the building component • Ideal working height • Flexible adjustment in width

Condition: new, Year of construction: 2025, Device description Welding tables in system 16 allow the use of many additional accessories, such as: screw clamps ratchet clamps mounting columns widening feet locking pins bumpers angular handles Front part is made of thick, 4 mm thick galvanized steel. The primary purpose is welding aluminum, stainless steel or carbon steel from thin and thick-walled profiles. Ledpfx Afswwq U Tefehr The solid device structure allows not only welding table use, but also locksmithing and repairs with the use of physical force. Parameters Dimensions (LxWxH) 915 x 460 x 885 mm Shelf height 310 mm Holes Ø16 spacing 100 x 100 mm - 45 pcs Lifting capacity 540kg TOP THICKNESS 4 mm Manufacturer: Cormak

Condition: excellent (used), Note: The pictures serve to clarify the material. - The workbench frames are commissioned unassembled; - The production time is usually approx. 3 - 5 working days. Basic dimensions: Width: approx. 2,000 mm Height: approx. 940 mm Depth: approx. 850 mm The scope of delivery includes: 04x square tube, used Material color: sendzimir galvanized Profile height: approx. 900 mm Square profile: 140 x 140 x 4 mm Drill hole grid: 75 x 50 mm Drill hole Ø: 13 mm 02x CS Sigma profile, used Material color: sendzimir galvanized CS Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 1,700 mm 02x CS Sigma profile, used Material color: sendzimir galvanized CS Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 550 mm 01x chipboard, used Chipboard thickness: 38 mm Chipboard width: approx. 2,000 mm Depth of chipboard: approx. 850 mm Surface: possibly coated (two-piece if necessary) 08x Mounting bracket, new Finish: sendzimir galvanized Dimensions: approx. 140 x 275 x 105 mm (DxWxH) Hole spacing outside: approx. 250 mm Lhodpfx Ajrtqm Doffjr Hole spacing inside: approx. 130 mm Hole diameter: approx. 13 mm Material thickness: 3.00 mm 06x self-drilling screws, new Finish: galvanized Dimensions: 6.3 x 70 mm 32x screws: M12 32x nuts: M12 32x washers: M12 Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: excellent (used), The scope of delivery includes: 02x workbench stand, used Material color: sendzimir galvanized frame profile: 90 x 75 x 2,00 mm stand height: 900 mm stand depth: 1.000 mm incl. cross and diagonal braces, foot plates The stands are pre-assembled ( screwed truss ) Ledpfx Afoi Ewqyefohr 04x workbench crossbars, used Material color: RAL 7035 light gray box profile: 80 x 40 mm Traversentyp: TRV1-240-084-30CE clear width: 2.400 mm 08x safety pins, new finish: completely galvanized 01x chipboard II. choice, used thickness chipboard: 38 mm width chipboard: 2.580 mm depth chipboard: 1.000 mm Surface: coated if necessary (two-part if necessary) 01x Chipboard II. Choice, used thickness chipboard: 38 mm width chipboard: 2.380 mm depth chipboard: 1.000 mm Surface: coated if necessary (if necessary in two parts) 16x drilling screws, new finish: galvanized dimensions: 6,3 x 70 mm The pictures are for clarification of the material. The material color may differ if necessary. The chipboards can be coated or uncoated. - The workbenches are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually about 5 working days.

Condition: new, Basic dimensions: Width: approx. 1,725 mm Lsdpfx Aov Tm Icsffshr Depth: approx. 750 mm Height: adjustable from 750 - 1,250 mm Scope of delivery includes: 01x Workbench frame, new Frame color: grey Bench leg adjustment: 700-1,250 mm adjustable 01x Drawer cabinet, new Cabinet color: grey Door color: blue Lockable: yes Number of drawers: 3 pcs Drawer height: 115 mm 01x Worktop, new Material: multiplex Material thickness: 38 mm Total width: 1,725 mm Total depth: 750 mm Possible delivery time: 10-12 weeks Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only available for pick-up. Any additional transport or shipping of this item is subject to extra charges, which can be quoted separately by us depending on the delivery location and delivery scope.

Condition: repair required (used), functionality: limited functionality, For sale Vecoplan infeed table. Can be used for infeeding up to 3.1meter long woodwaist to chipper feeder. Ledpfovuk Uijx Affohr

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, laser type: fiber laser, laser power: 3,000 W, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Working Area (mm): 3048×1524 X-Axis Travel (mm）: 1524 Y-Axis Travel(mm）: 3048 Z-Axis Travel（mm）: 80 X/Y Axis Positioning Accuracy: ≤0.03mm/m X/Y Axis Repositioning Accuracy: ≤±0.02mm Maximum Synthetic Positioning Speed: 150m/min Maximum Acceleration: 1.2G Cutting Slit Width: 0.1mm-0.5mm (measured for platesless than3mm thick) Cutting Surface Roughness: Ra3.2um-Ra25.4um(measured for plate thickness below3mm） Floor Size(mm): 6000*3000 Mainframe Dimension(mm): 5000*2300*1800 Lhjdpfx Aexvwcxeffor Screen Size: 21"LCD TransmissionMode: Rack andpinion dual drive Table Loading Capacity: 1.1(ton)

Condition: good (used), Hard cover assembly table The device is fully functional and in very good condition. Technical data: Max. binding width 810mm. Power supply: Pneumatic Weight: 140 kg Equipment: – elements for fixing the cardboard – module for wrapping the cover Lhedpfx Asvkt N Uoffer

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, The machine is possible to edit to any size of the product. It customization is very simple. It has a spraying unit included. Can spray or fill liquids in to the bottles or cans / tins. Lsdpox Dtumefx Affshr

Condition: good (used), Rotating table Lazy Susan Perfect for buffering products, bags or trays prior to further handling. This to prevent from overflowing and giving several issues in (automatic) production lines. Ljdotpgxispfx Affshr Height: 80 cm (height is adjustable) Diamter: 120 cm

Condition: used, functionality: fully functional, Year of construction: 2011, load capacity: 450 kg, lifting height: 9,900 mm, empty load weight: 2,300 kg, fuel type: electric, tire condition: 70 %, drive condition: 75 %, maximum load weight: 454 kg, Self-propelled scissor lift SKYJACK SJ III 4632 11.7 m working core. 317kg thr personal lift SKYJACK SJ III 4632 scissor lift for sale in excellent condition personal lift, work stand with extendable platform. Manufacturer: Skyjack year of manufacture: 2011 Lodpfsugtlijx Affshr load capacity: 454 kg Working height: 11.7 m Raised platform height: 9.7m Total width: 1.9 m Total length: 2.3 m Gross weight: 2300 kg non-marking tires operating hours: 374 TROJAN MOTIVE batteries in good condition. built-in battery charger

Condition: good (used), Table size:1500x1500mm Capacity : 6t Lhsdpfx Afofvqmxefjr Dimension: 1600x2500x2000mm Hydraulic