Used Wood Hog for sale (19,387)

Condition: excellent (used), CATALOG NUMBER 7240 Gkedpfx Agerby Dls Dof TECHNICAL DATA - Infeed width: 400 mm - Infeed height: 210 mm - Shaft width: 530 mm - Shaft diameter: 500 mm - Knife length: 530 mm - Number of knives: 2 pcs - Screen dimensions: 55x50 mm - 2 toothed feed rollers from below - Lower roller motor approx. 3 kW - Toothed feed roller from above - Upper roller motor 1.5 kW - Feed belt length: 4600 mm - Feed belt width: 400 mm - Main motor: 55 kW - Autoreverse - Feeder dimensions (L/W/H): 4630x620x760 mm - Machine dimensions (L/W/H): 2510x1700x1200 mm - Weight approx. 3500 kg – German made - Autoreverse (adjustable) – Used shredder, in very good condition Net price: 85,900 PLN Net price: 20,450 EUR depending on rate 4.2 EUR (Prices may change in case of significant fluctuations)

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, Zeno Drum Shredder Type 800/820 E 250/350, year of manufacture 2005 Feed opening: 350x800mm Rotor diameter: 800mm Drive: 75kW (original), converted to 90kW (2018) Gkedpox Eh Rxefx Ag Def 5 frequency-controlled feed rollers, 3 (lower) replaced in 2019 Metal detector Mesutronic, device type Metron 05 MN 5.0 D 850/500 -> see photo Spare parts available on request: - Feed gear motor (upper and lower) - Feed rollers (upper, 2 pieces) - Sprocket incl. shaft for vertical conveyor - Gear motors for vertical and cross conveyor to silo - Cutting knives, counter-knives, counter-knife holders,

Condition: like new (used), Year of construction: 2013, functionality: fully functional, Hello, The best equipment offer includes two automatic lathes. The equipment is barely used, practically new. It comes with a set of knives in different sizes from 15 to 50mm. The machines are of different sizes and production speeds. The small lathe machines parts with a diameter of 10-30mm, and the large one with a diameter of 20-55mm. They have not been used at all in recent years. The equipment is in working condition and supplied in full sets. Please request an additional video or photo if required. I can additionally offer a round rod making machine in the package, which manufactures raw material (round rod) for wood turning lathes, at a very, very low price. Gedoxr Rtpopfx Ag Djkf Best regards, Edijs Paleys

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, power: 18.5 kW (25.15 HP), color: blue, Shredder Type GAZ 62 with G-Rotor Factory-refurbished, new wear parts Feed opening: 620 x 820 mm Hopper capacity: 0.65 m³ Rotor diameter: 248 mm Rotor working width: 600 mm Rotor speed: 80 rpm Gsdex Eb Tmopfx Ag Dskf Cutting system: Spiral rotor; 26 knives, 30 x 30 mm Screen perforation: 10 mm or as required Control cabinet: completely wired, incl. 5 m cable Motor power: 18.5 kW Hydraulic motor: 0.75 kW Connected load: 400 V +/- 5% / 50 Hz Extraction port diameter: 160 mm Overall dimensions approx.: L = 1,800 mm, W = 1,230 mm, H = 1,640 mm Weight: approx. 1,300 kg Including: - Automatic star-delta start - Automatic shutdown in idle mode - Vibration-damping machine feet

Condition: excellent (used), Press for gluing wood with a feeder STETON PLA 2500x1300 - Italian production - CE and DTR - year of production 1998 TECHNICAL PARAMETERS: shelf dimensions 2500 x 1300 mm six hydraulic cylinders with a diameter of 85 mm automatic glue applicator with pneumatic feed a four-section feeding table with the possibility of setting each section individually the ability to set the number of elements fed for each section element dimension min. 300x30x25 (LxWxT) mm element dimension max. 2500x160x40 (LxWxT) mm shelf pressure 260 bar Gkjdpfxoh Tm A Eo Ag Dof max pressure of side pressure 120 bar bumper max pressure 200 bar total power 11 kW temperature max 120 " roller feed speed from 5-60 m / min feeder speed 0 -40 m / min adjustable speeds on the inverter roller receiving table 1400 x 2500 mm seven side hydraulic cylinders 1800 mm feeding conveyor electric heating of shelves cross feeding table 2500 x 1400 mm total length 588 cm total width 497 cm Transport dimensions 1000x 230x 220 cm weight 11 t

Condition: new, Year of construction: 2000, Eschlböck Biber 7 chipper • Feed opening: 370 x 560 mm • Equipped with 8 chopping blades Gksdoxdfhxepfx Ag Def • Feed conveyor: 800 mm long • PTO speed: 1000 RPM • No-stress feed system • Ready for immediate use! Condition: New Year of manufacture: 2000

Condition: excellent (used), Catalogue number 7836 TECHNICAL DATA Gkjdpfjx Arfbex Ag Dof - Loading hopper inlet 800x600mm - Outlet for shredded wood diameter 160mm - Rotor working width 580mm - Main motor 22kW - Pump motor 0.75kW - Number of knives 15 pcs - Knife dimensions (crown type) 40x40mm - Screen 25mm - Hydraulic pusher drawer - Electric autoreverse - Dimensions (L/W/H) 1730x1200x1620mm - Weight 1100kg ADVANTAGES – German-made – Operating documentation (DTR) – Hydraulic pusher drawer – Autoreverse – Used chipper, in very good condition Net price: 39,900 PLN Net price: 9,500 EUR (based on rate 4.2 EUR) (Prices may change with significant fluctuations)

Condition: excellent (used), Year of construction: 1990, operating hours: 50 h, functionality: fully functional, Disc chipper with 2 knives. Tractor PTO driven. Gjdpfx Asx Dzdisg Dekf

Condition: good (used), On offer: A wood shredder by Weima Gedpfx Aex Dx Apog Djkf Brand: Weima Model: -- Machine type: Wood shredder / chipper Feed hopper: Large industrial hopper for wood waste Shredding system: Rotor with knife assembly (typical Weima design) Material: Solid wood, panel offcuts, trimmings, scrap Construction: Heavy-duty, welded industrial steel frame Hydraulics: Available (push system for material feed and maintenance) Drive: Electric drive (data available upon nameplate information) Discharge: Wood chips / shredded wood waste 2 screen baskets, one in as-new condition Includes several additional new blades

Condition: new, Advantages BOVER_BASIC intelligent control system Power set (electric motor, reduction gear and belt transmission) Filling hopper Hydraulic pressure unit Robust and adjustable Hardened knives with four cutting edges with an extended service life Hardened cleaning knives Hardened cutting racks HARDOX sieve The engine start-up is controlled by the star/triangle system Basic characteristics FILLING HOLE (mm): 1445 × 1345 ROTOR WORKING LENGTH (mm): 650 ROTOR DIAMETER (mm): 270 SIEVE HOLE DIAMETER (mm): 14 CAPACITY (m3/h): 3 – 5* POWER (kW): 22 WEIGHT (kg): 1750 * Depending on the material and diameter of openings in the sieve Gsdpfxohbdg Ue Ag Dskf OPTIONS on request: Adjustable sieve rails Suction sink with Ø160 mm attachment Screw/snail conveyor (price for 1 meter) Hi-Lo "TURBO" hydraulic power unit Customized hopper Bover Premium with remote access Additional Sieve/Screen Heavy-duty gearbox (22/30 kW) Secondary cutting blade HARDOX toothed strip on pusher rack Hydraulic oil cooler system Ethernet PLC plug-in Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: new, Year of construction: 2025, PROFESSIONAL WOOD SPLITTER 16 TONS. The robust construction and high-quality wedge guarantees a long service life and trouble-free operation. The machine is designed for splitting wood up to approx. 700 mm in diameter! Its stable, robust construction ensures excellent working results. Machine description The splitter is equipped with an overload valve that drains oil into the tank and a powerful, trouble-free gear pump. The tree lift system makes it easy to place heavy materials directly under the splitting wedge 5-bolt power connection Angled wedge makes it easier for the wedge to sink into the material. FAULTLESS HYDRAULIC PUMP! Technical specifications Thrust force 16 TON Minimum wood diameter 80 mm Maximum wood diameter 700 mm Minimum timber length 350 mm Maximum length of wood 1100 mm Splitting speed (continuously adjustable) 4.6 - 14.2 cm/sec. Return speed 6.2 cm/sec. Wedge stroke length 948 mm Motor power 4,5 kW Voltage 400 V Hydraulic tank capacity 18 l Hydraulic pressure 27.7 MPa Dimensions 1050 x 1550 x 2500 mm Gkjdouqiq Dopfx Ag Dsf Weight approx. 259 kg

Condition: excellent (used), Year of construction: 2006, Residual Wood Shredder Manufacturer: Untha Model: LR 630 Year of manufacture: 2006 Operating hours: approx. 5,241 h Power: 18.5 kW Hopper opening: 624 x 792 mm Hydraulic feed Number of knives: 17 Rotor diameter: 248 mm Screen diameter: 20 mm Dimensions: 1,740 x 1,170 x 1,680 mm Weight: approx. 1,300 kg An additional set of new cutting knives included. Gkedpfx Aex Dinvjg Dof

Condition: excellent (used), CATALOG NUMBER 7032 TECHNICAL SPECIFICATIONS - loading chute inlet: 1050x610mm - shredded wood outlet: Ø160mm - rotor working width: 580mm - main motor: 18.5kW - pump motor: 0.75kW - number of knives: 14 pcs - knife dimensions: 30x30mm - screen: 15mm x 20mm - pressure drawer Gjdpfxjmgbt Is Ag Dokf - electric autoreverse - dimensions (L/W/H): 2000x1130x1530mm - weight: 970kg ADVANTAGES – German-made – autoreverse – pressure drawer – very good condition – used chipper Net price: PLN 47,900 Net price: EUR 11,400 Net price converted at exchange rate 4.2 PLN/EUR (in case of significant exchange rate fluctuations, the price may change)

Condition: new, functionality: fully functional, Here for sale is a Werz wood-fired baking oven. The oven is still new and has not been in use. Gjdpfxevbcu Ij Ag Dskf Oven is sold together with trailer. Please contact us if you are interested.

Condition: used, mileage: 278,141 km, power: 478 kW (649.90 HP), first registration: 05/2021, overall weight: 35,000 kg, fuel type: diesel, color: white, axle configuration: 6x4, maximum load weight: 18,325 kg, empty load weight: 16,675 kg, wheelbase: 4,750 mm, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: air, Year of construction: 2021, number of seats: 2, Equipment: ABS, air conditioning, crane, cruise control, differential lock, hydraulics, navigation system, parking heater, Color: White, Unladen weight: 16,675 kg, Gross permissible weight: 35,000 kg, 1st axle: 385/65 R22.5, 2nd axle: 315/80 R22.5, Leather seats, Air suspension, Retarder, Digital tachograph, Loading crane behind cab, Rear-mounted crane, EBS - Electronic Braking System, ESP - Electronic Stability Program, Automatic air conditioning, Stationary air conditioning, Adaptive Cruise Control (ACC), Seat heating, LED headlights, Headlight cleaning system, Automatic lights, Headlight height adjustment, Radio, Bluetooth audio streaming, GSM Bluetooth preparation, Rain sensor, Multifunctional leather steering wheel, Mechanically adjustable steering column, Anti-theft alarm, Alloy wheels, Electric windows (2x), Roof spoiler, Fog lights, Electrically adjustable and heated exterior mirrors, Electric curb mirror, Wide angle mirror, Immobilizer, Central locking with remote control, Wind deflector, 2x Toolbox, Refrigerator, Axle load indicator, Work lights, Hill Hold Control (HHC), LED daytime running lights, 1x 15-pin connector, driving mode function, Telematics system, Seat air conditioning, Upper and lower bed, cab suspension, SCR Kesla 2112T crane with luxury cab, Heated crane cab + CB radio, Janzen DA RH 28 trailer, year 2021, Lift axle on the trailer, ExTe TU chains on the trailer, 2 refrigerators, All-round work lights, Inverter, Air-suspended passenger seat, Golstein weighing system. Godpox Dfg Uefx Ag Dskf

Condition: good (used), Year of construction: 1992, Single-piece sanding machine sanding from top and bottom electric height adjustment with digital display continuously variable feed speed star/delta starter pneumatic belt tensioning main switch sanding belt oscillation finishing brush unit top and bottom, manual height adjustment Working width: 190 mm Working height: 4 - 150 mm Min. workpiece length: approx. 280 mm Abrasive belt dimensions (L x W): 1850 x 200 mm Feed speed: 5 - 25 m/min Installed power: approx. 14 kW Extraction port diameter: 2 x 180 mm Gkodpfx Aowyda Uog Def Dimensions (L x W x H): 2000 x 1000 x 2050 mm Weight: approx. 1800 kg Incl. infeed and outfeed roller conveyor (L = 1600 mm, non-driven) Note on used machines: • Technical data subject to errors and prior sale. • Quoted prices are ex-works – loaded free of charge! • The machines have been cleaned and function-tested. • All machines are sold as inspected, with no claims to warranty. Buyers are welcome to inspect machines at the location. • Special agreements are only valid in written form. (We answer inquiries only when your address and telephone number are provided!)

Condition: reconditioned (used), Year of construction: 2007, functionality: fully functional, cutting length (max.): 5,750 mm, cutting height (max.): 120 mm, cutting width (max.): 2,600 mm, main saw diameter: 460 mm, power: 27 kW (36.71 HP), Machine type: fh6 580 HT260 ERB-L / MCS-Evolution / Win 10 Cutting length: 5.750 mm Cutting width: 2.600 mm Year of construction: 2007 Saw blade projection max .: 135 mm Saw blade diameter max .: 460 mm Main saw motor: 27 kW Scorer aggregate Gsdpfx Ajvx Ru Dog Dokf Scorer saw blade diameter max .: 200 mm Package height max .: 120 mm Package height min .: 3 mm Saw aggregate forward: 6 up to 150 m / min Saw aggregate backward: up to 150 m / min Feeder: up to 80 m / min (Europe: forward 25 m/min acc. EN 1870-13) Number of clamps: 8 pcs grip push clamp Clamp opening: 125 mm Lifting / lowering device for clamps Strip aligner before and after the pressure beam Air cushion tables: 1 pcs. (2100 x 700 mm) Turn table: 1 pcs. (5800 x 2200 mm) 90° turnable Machine table: heavy-duty steel construction „Closed Frame Construction“ machine table surface is precision machined Machine table lips Automatic cutting length adjustment Lift table, max. panel width: 2600 mm Feeding roller conveyor: 7100 x 2600 mm Recesses for forklift trucks: 2 pcs Frequency converter for feeding roller conveyor Positioning stop: 2 pcs Push-off trolley Push-off device: 3 pcs Book aligning device for longitudinal board edges: 3 pcs Retaining device: 3 pcs Roller table Cross alignment stop at the roller table This machine is in very good conditions and works very well. The machine is reconditioned, checked and tested in our company. Errors and alterations in the technical datas and informations excepted! (displayed photos are symbol photos)

Condition: like new (used), engine power: 9 kW Godpfsx Arupsx Ag Dokf cutting length: 2000 mm automatic guide bar lubrication chain pitch: 3/4" year of manufacture: 2007 CE marking

Condition: excellent (used), CATALOGUE NUMBER 7065 TECHNICAL DATA - Max. saw blade diameter: 300 mm - Spindle diameter: 30 mm - Blade guards: 2 pieces - Pneumatic cutting (up/down blade movement) - Saw units adjustable at 45° - Manual spacing adjustment of the saw units - Min. cutting length at 90°: 220 mm - Max. cutting length at 90°: 2820 mm - Cutting width: 110 mm - Cutting height at 90 degrees: 90 mm - Pneumatic clamps: 2 pieces - Foot switch - Material support - Main motor: 2×1.6 kW - Dimensions (L/W/H): 3620x1100x1250 mm - Weight approx. 500 kg – Unpainted – Tilting saw units – Used saw, in very good condition Net price: 13,900 PLN Net price: 3,300 EUR depending on the exchange rate 4.2 EUR (Prices may change with higher fluctuations) Gkodpemv E Hxjfx Ag Def

Condition: excellent (used), Year of construction: 2007, operating hours: 9,300 h, functionality: fully functional, Shredder Doppstadt DW3060 Year of manufacture: 2007 Magnet over the conveyor belt. Operating hours: 9300 mth Price: 59,000 EUR Gsdpfx Aox Ap Aqog Dskf

Condition: used, SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght Godpfx Aewp Rqfjg Djkf • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price:20,000.00 EUR (VAT is not included)

Condition: new, Year of construction: 2025, Weima single shaft shredder type WL 6 Power 18,5 kW Our machine concept WL 6 The Weima high performance shredders with their flexible can process all kinds of wood materials (hardwood, softwood, chipboard, MDF materials softwood, chipboard, MDF materials, plywood, veneer residues etc. ) into and, in the case of bulky materials, achieve an enormous volume reduction of the material. enormous volume reduction of the material. Mode of operation: The machine is equipped with a large hopper and can be fed by a conveyor belt or by hand. fed by means of a conveyor belt or by hand. This hopper can be adapted to individual needs and guarantees a continuous and cost effective and cost effective material feed without the need for manual assistance. manual assistance. Vqwemi Technical specification WL 6 / 18,5 kW Hopper opening: 800 x 1.000 mm hopper capacity: 0,9 m³ working width of the rotor: 800 mm diameter of the rotor: 252 mm Driving power: 18,5 kW Rotor speed: 80 -120 rpm Number of knives: 42 pieces type and size of knives: concave / 40 x 40 mm, cutting reversible crowns Sieve perforation: 10-60 mm possible (standard 15-20 mm) Painting: WEIMA standard RAL 2002 / 7016 connected load: 400 V +/- 5% / 50 Hz weight: approx. 1.600 kg Gedpfxjh Eiw Ie Ag Dekf Included: - Switch cabinet ( Rittal ) incl. electrical control ( Moeller / Siemens ) and star-delta start-up - Rubber oscillating elements - V - rotor ( patented ) with knife pockets fixed in the profile - gear limit switch - On

Condition: excellent (used), CATALOG NUMBER 7623 Technical data: - max saw blade diameter 300mm - spindle diameter 30mm - blade guards 2 pcs - pneumatic blade feed - saw units adjustable to 45° - manual adjustment of saw unit spacing - min cutting length at 90° 300mm - max cutting length at 90° 4600mm - cutting width 90mm - cutting height at 90° 90mm - pneumatic clamps 2 pcs - control buttons - material supports 3 pcs - main motor 2×1.1kW - extraction port diameter 2x90mm - dimensions (L/W/H) 5030x1150x1400mm - weight approx. 500kg ADVANTAGES – Italian production Gksdpfowbz Uxjx Ag Djf – tiltable saw units – used saw, in very good condition Net price: 15900 PLN Net price: 3780 EUR (depending on the rate of 4.2 EUR) (Prices may change with larger fluctuations)

Condition: excellent (used), Year of construction: 2023, operating hours: 1,800 h, functionality: fully functional, Doppstad AK 640/K Year of manufacture: 2023 1800 operating hours First owner Gedpfxjx Apzae Ag Dekf Spraying system Magnetic separator Price: €425,000.00 Leasing available until 09/2028, can be taken over.

Condition: excellent (used), CATALOG NUMBER 7616 TECHNICAL DATA - Shaft width: 510 mm - 4-knife shaft - Table length: 2640 mm - Shaft guard - Cast iron tables - Both tables adjustable - Original cast iron fence adjustable for angle - Motor: 4 kW - Extraction port diameter: 160 mm - Dimensions (L/W/H): 2640x1000x980 mm - Weight: 970 kg ADVANTAGES – German manufacture – Not repainted – Long tables – Used jointer Gkodpfx Agowbdn Us Def – Very good condition Net price: 9900 PLN Net price: 2350 EUR at an exchange rate of 4.2 EUR (Prices may change with significant fluctuations)