Used Wood Finer for sale (6,220)

Condition: used, Substation for wood chip extraction – Wood chip extraction system Brand: Fida Hjdpfxeyx Digj Agfoff Installed power: 37 kW System equipped with 98 filter bags (Ø 250 mm, height 2810 mm), designed to ensure high suction and filtration capacity. Overall dimensions: 8500 x 2500 mm

Condition: used, Used machine, requires inspection. Hjdpfxsyx Axte Agfjff

Condition: good (used), Wood band saw, band saw machine, band saw, vertical band saw, bone saw, table saw, bone band saw, butcher's saw -Manufacturer: Reich, band saw, table saw with stand -Motor: Dietz 0.8 kW Hjdpfoyvrd Tjx Agfjff -Cutting width: max. 200 mm -Cutting height: max. 275 mm -Saw blade: Length 2200 mm -Dimensions: 830/720/H1715 mm -Weight: 114 kg

Condition: new, operating hours: 2 h, Special, patented shape of the ROTOR! Motor power: 11/ 15/ 18 kW, 400 V, 50 Hz Rotor width: 595 mm Rotor speed: approx. 45 rpm Rotor diameter: 280 mm Sieve: hole size 7 to 30 mm (optionally hardened special steel) Cutting crowns: 34 pieces 25×25 mm (hollow ground, 4-way reversible, hardened special steel) Counter blade: up to 2 pieces (2-way reversible, optionally hardened special steel) Throughput*: up to 2 m3/h (*depending on material) Material feed opening approx.: 600 x 350 mm Solid main bearings compact control cabinet with modern PLC control & 5m cable length Suction diameter: 200 x 200 mm Dimensions L x W x H approx.: 1,050 x 1,180 x 1,890 mm Weight: approx. 900 kg Hfedpfjhq T Udsx Agfof 2000 hour guarantee on the high-performance gearbox

Condition: new, Universal use (diverse wood, pallets with nails and pins, particle boards, waste and scraps, veneer, MDF plates, cardboard boxes, plastics, textile etc.) Hfjdjgw Sxzepfx Agfof Power: 18,5 kW Shaft length: 550 mm Shaft diameter: 222 mm Shaft RPM: 120 rpm Number of cutting knives: 14 Granulation: 10-30 mm Capacity: up to 4 m3/h (depending on the wood) Material discharge opening: 160 mm Material: Plastics, cardboard, wood (chipboards, MDF boards, waste,...) Filling opening: 946 x 567 mm Dimensions L/W/H: 1880/1120/1670 mm Weight: approx. 1250 kg 2 years warranty or 2000 working hours Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: used, Year of construction: 2013, functionality: fully functional, overall weight: 2,190 kg, input voltage: 380 V, type of input current: three-phase, spindle speed (min.): 2,500 rpm, spindle speed (max.): 3,600 rpm, rotational speed (max.): 3,600 rpm, rotational speed (min.): 2,500 rpm, input frequency: 50 Hz, We offer this used Locatelli ARIETE 3 automatic wood lathe, year of manufacture 2013. Machine type: ARIETE 3 Year of manufacture: 2013 Serial number: CA 2725 Voltage: 380 V Frequency: 50 Hz Number of phases: 3 Delivery date: 10.10.2013 Weight: 2190 kg Automatic lathe Locatelli Ariete 3 Maximum/minimum prism length: 1000/200 mm Maximum/minimum prism dimensions: 85×85/20×20 mm Maximum workpiece length: 120 mm with hole, 150 mm without hole Automatic material feeder Main motor with 3/4 kW output Two spindle speeds: 2500/3600 rpm Oil pump motor: 2.2 kW Hjdpfeyxw D Djx Agfoff Operating pressure: 6–8 bar Comes with many accessories. Units: roughing, finishing, drilling unit, parting knife You are welcome to see the machine in operation at any time. More information available by phone. If you have any questions or require further information, please feel free to send us a message or contact us by phone.

Condition: excellent (used), CATALOG NUMBER 7069 TECHNICAL DATA - Inlet width: 400mm - Inlet height: 150mm - Shaft width: 450mm - Shaft diameter: 550mm - Number of knives: 2 pcs Hjdpfoyh Ikvjx Agfjff - 3 toothed feed rollers from the top and bottom, 2×2.2kW - Electric auto-reverse - Reverse mode - Belt conveyor - Conveyor length: 5100mm - Feed belt width: 400mm - Main motor: 30kW - Chipper dimensions (L/W/H): 2600x1500x1530mm - Overall conveyor dimensions (L/W/H): 5200x560x910mm - Weight approx.: 3000kg – with belt conveyor – electric auto-reverse (adjustable) – reverse mode – used chipper, in very good condition Net price: 68,900 PLN Net price: 16,400 EUR (based on exchange rate 4.2 EUR) (Prices may vary with significant exchange rate fluctuations)

Condition: excellent (used), Catalogue number 7411 TECHNICAL DATA - Infeed width: 400 mm - Infeed height: 180 mm - Shaft width: 430 mm - Shaft diameter: 430 mm - Knife length: 430 mm - Number of knives: 2 pcs - Screen dimensions: 60x60 mm - 2 gear-driven feed rollers from below - Lower feed roller motor: 1.5 kW Hfodpfx Aex S Nftsgfef - Gear-driven feed roller from above - Upper feed roller motor: 1.5 kW - Belt feeder - Belt feeder length: 2250 mm - Belt feeder width: 400 mm - Main motor: 30 kW - Auto-reverse - Overall dimensions (L/W/H): 4300x1630x1000 mm - Weight: 1800 kg - German made - Auto-reverse (adjustable) - Used chipper, in very good condition Net price: 69,900 PLN Net price: 16,640 EUR based on rate 4.2 EUR (Prices may change with higher fluctuations)

Condition: excellent (used), CATALOGUE NO. 7922 Hfedoyvimxjpfx Agfsf TECHNICAL DATA - Feed hopper inlet: 800x600mm - Outlet for processed wood: diameter 160mm - Rotor working width: 590mm - Main motor: 18.5kW - Number of knives: 14 pcs - Knife dimension: 30x30mm - Screen: 15mm - Pressing drawer - Electric auto-reverse - Dimensions (L/W/H): 1800x1300x1650mm - Weight: 1044kg ADVANTAGES – German-made – DTR documentation – Pressing drawer – Auto-reverse – Used wood chipper, very good condition Net price: 36,900 PLN Net price: 8,790 EUR Net price calculated at the exchange rate of 4.2 PLN/EUR (In case of larger exchange rate fluctuations, the price may change)

Condition: good (used), Year of construction: 2010, Wood gasification system for electricity generation, approx. 50 kW, installed in a 20-foot container. Storage tank approx. 3.5 m in length. Material feed via inclined chain conveyor. Gas engine not included, but can be sourced used or new. Hedpfx Ageyxv Emefeff

Condition: excellent (used), functionality: fully functional, PALLET CRUSHING LINE : Hfodpfx Agsyvhi Eofsf 2 Shredder 2 conveyors with magnetic drum for nail removal. Used only 200 hours AMIS shredder and 30 hours RUBUST shredder. Like a new and good price.

Condition: used, Year of construction: 1995, Constant machine - combination station, dust brush - thickness measuring device - electronic segmented sanding pad MCS System Weber 32 mm - grooved steel calibrating roller - belt blow-off - vacuum conveyor belt. Sanding width: 1100 mm Drive: 15 kW Feed approx. 1.1 kW Height adjustment 0.25 kW Sanding belt dimensions: 1150 x 2500 mm Max. workpiece thickness: 150 mm Machine width: 1700 mm Machine length: 2000 mm Machine height: 2160 + 150 mm Machine weight: 1900 kg Constant working height: 850 mm Extraction connector: belt 180 mm / brush 120 mm Suction air volume: 0.74 m³/s Connected load: 23 kW Compressed air supply: 7 bar Feed speed: 3-15 m/min. Operating hours: 7000 h Location: Nattheim Hfsdpfxex Twcpj Agfof

Condition: good (used), Year of construction: 1993, Rotor width 800 mm 22 kw motor 20 knives on rotor 25 mm concave There is also a wooden frame to put the chipper higher so that a conveyor belt fits in below Hfsdpfx Aop H Sv Dogfof

Condition: ready for operation (used), TECHNICAL SPECIFICATIONS: FOR SHREDDING WOOD WASTE SHAFT WIDTH: 800 MM SHAFT DIAMETER: 300 MM NUMBER OF KNIVES: 18 KNIFE DIMENSIONS: 30/30 MM HOPPER: 1000X800X900 MM SCREEN DIAMETER: 15 MM DISCHARGE DIAMETER: 200 MM EMERGENCY STOP SWITCH POWER SUPPLY: 400 V MOTOR POWER: 22 KW OVERALL DIMENSIONS: LENGTH: 2000 MM WIDTH: 1600 MM HEIGHT: 1800 MM Hfedpfsyw I Ahjx Agfef

Condition: used, Year of construction: 1997, machine/vehicle number: 3073, functionality: fully functional, input voltage: 400 V, input current: 34 A, input frequency: 50 Hz, type of input current: AC, cutting height (max.): 60 mm, cutting width (max.): 2,850 mm, saw blade diameter: 125 mm, saw blade bore: 30 mm, rotational speed (max.): 2,870 rpm, total length: 5,430 mm, total width: 5,040 mm, total height: 1,640 mm, overall weight: 3,150 kg, cutting length (max.): 3,200 mm, compressed air connection: 6 bar, feed length Y-axis: 3,200 mm, feed rate Y-axis: 40 m/min, main saw diameter: 280 mm, saw drive: 7,500 W, Equipment: scorer, Used plasterboard saw with extraction system for sale Hfjdpfsyfg Rlox Agfsf For sale is a plasterboard saw with integrated extraction system, year of manufacture 1997. The machine is used but in good condition. Details: - Year of manufacture: 1997 - Condition: Used, but good - Including extraction unit - Location: DE 93326 Abensberg - Inspection under power possible by appointment Important information: - Sale exclusively to commercial buyers. - Sale without any warranty. - All information provided without guarantee. If you are interested or have questions, please contact us to arrange a viewing appointment.

Condition: excellent (used), Wood dryer from the Italian company OS PANTO 4 chambers – each: - width: 16.9 m - length: 13.5 m - gate height: 5.9 m Batch capacity per chamber approx. 270 m³ Hodpfxeyw H H Es Agfeff Complete with full documentation, automation, ALENT control software

Condition: like new (used), engine power 18.5 kW feed hopper Hodpjyw Hxzjfx Agfjff press drawer 2 cm screen year 2011 380 V

Condition: excellent (used), Year of construction: 2006, I sell the complete line for production of solid wood panels. Manufacturer: KALLESOE MACHINERY AS Modell: LHF6114 + KL30 Maximum possible input length: 1800mm Press width maximum 525mm (useful between appr. 480-520mm) Minimum and maximum slat width: max. 35mm x 80mm and 16mm x 100mm Glue: Danafix 446 Maximum possible output length: 1800 mm - 6000 mm Hodpfx Aoyw Aicsgfsff Available immediately. Possible to test.

Condition: excellent (used), Year of construction: 2008, I sell the press for glulam glued massive wood LISY DVORAK TH6, year 2008. Hfedpfoh Txl Isx Agfef Material size 2600 X 1050 x 50mm 6 working areas, manual rotation. 6 pcs hydraulic cross pressures per 1 area / pomp 1,1 KW 6 pcs manual pressures per 1 area Self weight 1350kg. Very good condition. Available immediately.

Condition: excellent (used), Year of construction: 2008, I sell the press for glulam glued massive wood LISY DVORAK TH6, year 2008. Hedpekd Drhefx Agfjff Material size 3000 X 1250 x 50mm 6 working areas, manual rotation. 6 pcs hydraulic cross pressures per 1 area / pomp 1,1 KW 6 pcs manual pressures per 1 area Self weight 1200kg. Glue spreading machine LISY DVORAK NL200 included in price. Very good condition. Available immediately.

Condition: excellent (used), Catalogue no.: 7923 TECHNICAL DATA inlet of loading hopper: 800x600mm outlet for shredded wood: Ø 150mm rotor working width: 590mm main motor: 18.5kW pump motor: 0.75kW number of blades: 14 pcs Hfsdpfx Asyug Euegfjf blade size: 30x30mm sieve: 15/20mm pressure drawer electric auto-reverse dimensions (L/W/H): 1750x1200x2000mm weight: 1100kg ADVANTAGES – German-made – DTR technical documentation – pressure drawer – auto-reverse – used chipper, very good condition Net price: 35,900 PLN Net price: 8,550 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (in case of major exchange rate fluctuations, the price may change)

Condition: good (used), Catalogue number 7872 TECHNICAL DATA - Infeed width: 450mm - Infeed height: 200mm - Shaft width: 530mm - Shaft diameter: 480mm - Knife length: 530mm - Number of knives: 2 pcs - Screen size: 50x50mm - Lower toothed feed roller: 2 pcs - Lower shaft motor: 0.75kW - Upper toothed feed roller: - Upper shaft motor: 0.75kW - Main motor: 45kW - Machine dimensions (L/W/H): 3600x1700x1400mm - Weight approx. 2200kg ADVANTAGES – German-made – Not repainted - No electrical box – Used chipper, good condition, for inspection Net price: 38,900 PLN Net price: 9,260 EUR (depending on exchange rate 4.2 EUR) Hsdpfx Agoyaalrsfoff (Prices may change with significant fluctuations)

Condition: ready for operation (used), functionality: fully functional, Wood chipper, sawmill residue, Klockner 80x300B 2WT Hsdpeyub Evjfx Agfeff Knife width: 300 mm Number of knives: 2 Main motor power: 18.5 kW Feed belt length: 1600 mm Feed belt width: 300 mm Extraction nozzle: 200 mm Dimensions: 3000x1400x1020 mm

Condition: used, Year of construction: 2010, Used machine from 2010, operational, requires inspection and maintenance. Hjdpfxjywhcno Agfeff

Condition: new, Year of construction: 2026, functionality: fully functional, power: 18.5 kW (25.15 HP), overall weight: 1,820 kg, 1 new hopper-type shredder DH 600, 18.5 kW Rotor width: 600 mm Hfsdpfxomv Eh Nj Agfof Rotor diameter: 220 mm Number of knives: 28, concave ground, four-way reversible Motor power: 18.5 kW Electrics: 400V, 50 Hz Control: control cabinet, fan-cooled, Siemens PLC Hopper opening: extended hopper Hopper volume: approx. 0.60 m³ Screen: 20/25 mm or as required Hydraulics: 40-liter tank, external gear pump Dimensions: 1750 x 1280 x 1650 mm Weight: 1820 kg Throughput: 1–3 m³/h, depending on material and screen size Extraction nozzle: 160 mm Extraction capacity: min. 28 m/s