Used Wood Finer for sale (16,772)

Condition: used, Year of construction: 2009, Fröling Turbomat 500 – wood-chip biomass boiler (2009) ⚙️ Technical data • 🔹 Model: Fröling Turbomat 500 • 📅 Year: 2009 • 🔥 Nominal output: 450 kW (W40) • ♨️ Maximum output: 495 kW • 💧 Water content: 750 litres • 🧱 Operating pressure: 6 bar • 🌡️ Max. temperature: 110 °C • ⚖️ Weight: approx. 6 800 kg • 🏭 Manufacturer: Fröling Heizkessel- und Behälterbau GmbH – Austria ⸻ 🔩 Main features • ♻️ Fully automatic ash removal and heat-exchanger cleaning • 🔥 Four-layer, fireclay-lined high-temperature combustion chamber • 💦 Water-cooled feed channel – ideal for moist fuels • ⚙️ Moving grate for continuous and efficient combustion • 🌬️ Lambda control with multi-zone air regulation and low emissions • 🌀 Automatic draught and suction fan control • 🧰 Robust industrial design, easy to maintain • 🌲 Fuels: wood chips (G30–G50), pellets, sawdust, biomass ⸻ 💡 Advantages • ⚡ High efficiency, fully automatic operation • 🔧 Low maintenance, long service life Fgodpfx Afsxmrwfoioh • 🌫️ Reliable performance even with higher-moisture fuel • 🏢 Ideal for industrial and municipal heating systems ⸻ 📍 Location: Mosonmagyaróvár, Hungary

Condition: excellent (used), Year of construction: 2009, operating hours: 150 h, functionality: fully functional, power: 30 kW (40.79 HP), Chipper Shredder Teknamotor SKORPION 280EB/2 - manufactured in Poland - year of production 2009 Fjdpfx Afexmif Hsijgh TECHNICAL PARAMETERS: Material diameter 140 mm main motor 30 kW number of knives 2 pcs. length of knife 270 mm length of infeed transp. 2500 mm belt width 280 mm transport dimensions (length / width / height) 4100 / 1000 / 1550 mm weight about 1000 kg

Condition: used, Auction item. Wood processing machine used 15 years ago. Fgedpfxsxmhtcj Afieh Current condition unknown.

Condition: new, Year of construction: 2025, Engine 7.5 kW, 50 Hz, 380 V, 3 phases Splitting pressure 20 tons Fgjdov Dvhyopfx Afijh Automatic saw yes Maximum trunk diameter 38 cm Maximum tree length 61 cm Feeder length 1.8 m Chain saw / splitter drive hydraulic max. 4800 rpm Saw and feeder control hydraulic Conveyor with winch 3.2 m length / 250 mm width Conveyor belt tilt angle ±15° (manually set) Conveyor belt speed 0.8 m/s Chain saw 22" Cylinder diameter 4" Conveyor belt length 3.2 m Cycle time 6 seconds Trailer wheel 12" 4-arm splitting wedge Hydraulic oil capacity 32 L Weight 737 kg The machine is placed on a wheeled chassis with a ball hitch. The saw-splitter is equipped with a 3.2 m long belt feeder that can transport processed wood directly to the trailer, the maximum height of wood feeding by the conveyor is 2 m The machine's capacity is about 5 - 8 cubic meters of wood per hour. Depending on the type wood. The machine can use various optional accessories, such as a hydraulic log feeder, wedges.

Condition: used, Year of construction: 2010, functionality: fully functional, - Manufacturer: GEMOS CZ, spol. s r.o. - Boiler type: gasification - Output: 110 kW Fodpfx Aoxa Evbsfiegh - Year of manufacture: 2010 - In operation since: 2010 - Fuel feeding: automatic, with screw conveyor

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 3 h, functionality: fully functional, power: 18.5 kW (25.15 HP), overall weight: 1,700 kg, The LR700 is a single-shaft shredder designed for a wide range of applications. Customers are impressed by its compact design and universal application options. Together with the proven UNTHA cutting system, the powerful and wear-free swivel pusher ensures reliable shredding of different types and quantities of wood. Fjdpfou Iva Ijx Afisgh Further technical data: Motor voltage400 V (50Hz) Suction nozzle200 mm without screw conveyor Belt drive with 2-stage slip-on gearbox and elastomer damper Filling opening 700 x 1,065 mm Hydraulics 1.1 kW Rotor speed: 98 rpm Perforated screen: 25 mm Cutting system rotor Design: Smooth Number of blade rows: 1 pc. Number of cutting tools: 19 pcs. Design of cutting tools: ÜSS Rotor length: 700 mm Rotor diameter: 300 mm

Condition: excellent (used), CATALOG NUMBER 7769 TECHNICAL DATA - Top loading hopper dimensions (L/W): 650x240mm - Rotor width: 360mm - Motor: 7.5kW - Screen: 8mm - Knife width: 90mm Fgedpoxix Szsfx Afish - Number of knives: 3 rows of 4 pcs - Throughput: approx. 700kg/h - Extraction spout diameter: 100mm - Dimensions (L/W/H): 1200x830x1440mm - Weight: approx. 300kg ADVANTAGES – Made in Poland – Unpainted – Mobile – Very good condition – Used chipper Net price: 16,900 PLN Net price: 3,980 EUR at the exchange rate of 4.25 PLN/EUR (Prices may vary in case of significant exchange rate fluctuations)

Condition: excellent (used), Bruks 602 CS Drum Chipper - Inlet opening size: 540 x 300 mm - Drum diameter: 600 mm - Number of knives: 2 - Maximum wood thickness: 180/100 mm - Main motor power: 26 kW - Fan motor power: 11 kW - Capacity: up to 20 m³ of chips/hour Fgjdpfx Ajxmbidofish - Standard chip length: 20-35 mm - Net weight: 1400 kg - Manufacturer: BRUKS (Sweden) Condition: tested, in working condition Conveyors are also available

Year of construction: 2003, condition: ready for operation (used), General Data Measurements width 2510 mm Measurements depth 1680 mm Measurements height 2180 mm Machine weight 8000kg aprox Fedpfxjxirhie Afiegh Additional Equipment 6-armed offload table PC + Monitor Electrical connection: 3x 63A, max. 15kW Pneumatic connection 1/2", 9 bar at least 400l/min Main supply line for pneumatics min. 3/4" This 4-axis HUNDEGGER Speed-Cut SC1, manufactured in 2003, is a universal machine center that offers advanced wood processing capabilities. It features computerized cutting, drilling, and milling with a maximum cutting height of 160 mm and width of 450 mm. The machine is equipped with a programmable controller for saw blade adjustments and a pneumatic clamping system, ensuring efficient material handling. The robust 4-axis CNC control enhances precision in operations. For more information about this machine center, please reach out to us. Application Types CNC Wood Machining

Condition: used, operating hours: 2,500 h, functionality: fully functional, Heizohack HM 14 800 K Crane-fed wood chipper Fjdexl R Tpepfx Afisgh Chassis with large axles Operating hours: approx. 2,500 h Recently had a major factory inspection Bosch Rexroth control system Radio remote control for truck driver 80 to 150 m³ per hour 3 chip sizes: G30, G50, and G80 Coupling plug for electronics Towing hitch (AHK) Professional support system No backlog in maintenance Optional at extra cost: Telescopic wood splitter, year of manufacture 2023

Condition: used, functionality: fully functional, - Manufacturer: Dřevo Trust a.s., Loučná nad Desnou - Height: approx. 18 m - Clearance height: 4.8 m Fsdpfsxa Eu Rox Afijgh - Volume: approx. 140 m³ - Shell height: 9 m - Shell diameter: 4.5 m - Discharge motor power: 15 kW - The silo was subsequently equipped with a particulate separator (cyclone)

Condition: as good as new (ex-display), functionality: fully functional, power: 11 kW (14.96 HP), overall weight: 850 kg, extraction nozzle diameter: 160 mm, rotational speed (max.): 85 rpm, rotor diameter: 248 mm, Further Technical Data Feed opening: 516 mm x 830 mm Perforated screen diameter: 15 mm - 20 mm Number of reversible cutting plates: 14 pcs Throughput capacity: approx. 0.5 – 1 (depending on material properties and screen diameter) Required extraction air speed: 22 m/s Sound pressure level: 82 dB (A) Standard Equipment Including feed hopper Motor configuration IE2 Drive via belt drive with 2-stage flange-mounted gearbox and elastomer damper Screen perforation from 12-30 mm Including extraction nozzle Cutting system ÜSS Vibration-damping machine feet Siemens logic module LOGO, including automatic reversing and foreign material shut-off Fgjdpfx Afjw A Acaeieh Automatic shutdown when the machine is idle Control elements and hour meter integrated in control cabinet door Voltage 400 V/50 Hz 1 potential-free contact for downstream system components Motor cable 4 m in length Machine equipped with 15-20 mm perforated screen

Condition: excellent (used), CATALOG NO. 7767 TECHNICAL DATA - Max. saw blade diameter: 330mm - Spindle diameter: 30mm - Blade guards: 2 pcs - Pneumatic blade feed - Saw units adjustable at 45° angle - Manual adjustment of saw unit spacing - Min cutting length at 90°: 400mm - Max cutting length at 90°: 3270mm - Cutting width: 90mm - Cutting height at 90°: 90mm - Pneumatic clamps: 4 pcs - Control buttons - Material support: 1 pc Fjdpfjxix H Sjx Afisgh - Main motor: 2×1.1kW - Extraction outlet diameter: 2x100mm - Dimensions (L/W/H): 3850x900x1500mm - Weight: 450kg ADVANTAGES – Italian manufacture – Tilting saw units – Used saw, in very good condition Net price: 14,900 PLN Net price: 3,500 EUR depending on the rate of 4.25 EUR (Prices may change with significant exchange rate fluctuations)

Condition: excellent (used), Year of construction: 2005, Wood chipper with walking floor. Rotor width: 630 mm. Motor: 18.5 kW. Only 612 operating hours. Fgedpfx Afoxl R Aweieh

Year of construction: 2012, condition: ready for operation (used), This HSM ABW-ROTA-2200 was manufactured in 2012. A used foil cutter featuring a cutting width of 2200 mm, it includes an IR preheating zone and a cooling unit. The semi-automatic roll change at the front and automatic stacking of sheets on pallets at the rear enhance its functionality. Consider the opportunity to buy this HSM ABW-ROTA-2200. Contact us for more information. Application Types Other Woodworking Machinery Fgodpfsxirimsx Afieh

Condition: excellent (used), Year of construction: 2017, Weima Wood Shredder - Walking Floor Shredder - Low-Noise and Slow-Running Top condition - only 150 operating hours - Type: WL 600 Fgodpexiq Sysfx Afish Shaft diameter (mm): 260 Knife length (mm): 600 Knife shaft speed (rpm): 80 - 125 Number of knives (pcs): 14 Max. granulate size (mm): 20/25 Opening (mm): 600 x 800 Extraction port diameter (mm): 160 Motor power (kW): 15 Voltage (V): 400 Working height (mm): 1645 L x W x H (mm): 1,805 x 1,118 x 1,645 Weight (kg): 1,100 Location: ex-stock 54634 Bitburg - available immediately - Subject to prior sale

Condition: excellent (used), Automatic lathe Locatelli Ariete 3 Length of the cant max/min 1000/200mm Dimensions of the cant max/min 85×85/20x20mm Maximum length of the processed material 120mm with a hole 150mm without a hole Automatic material feeder Fsdexhbyxjpfx Afiogh CE certificate Complete DTR documentation Main engine with a power of 3/4kw Two spindle speeds 2500/3600rpm Oil pump engine 2.2kw Working pressure 6-8bar

Condition: used, functionality: limited functionality, cutting height (max.): 90 mm, cutting width (max.): 140 mm, cutting length (max.): 2,820 mm, total width: 950 mm, total length: 3,600 mm, total height: 1,250 mm, saw blade diameter: 300 mm, type of input current: three-phase, rotational speed (min.): 3,000 rpm, OMGA TR2-A Double Mitre Saw for Wood and Aluminium Specifications: • Condition - used, requires adjustments and minor repairs • Manufacturer - OMGA • Model - TR2-A • Main motors - 2 x 2.2 kW (3,000 rpm) • Pneumatic head control • Max cutting length - 282 cm • Min cutting length - 15 cm • Max cutting cross-section - 90x140 mm (at right angles) • Max blade diameter - 300 mm Fgodpsxl Ecxjfx Afijh • Extraction nozzles diameter 80 mm • Angle cutting range from -45 to +45 degrees (right, left) • Vertical clamps for material hold-down • Weight - approx. 600 kg • Overall dimensions - 360 x 95 x 125 cm (L x W x H) Additional information: • Machine operational but requires minor fixes and adjustments • Provided photos show the actual condition of the item for sale • Possibility to power up and test the machine on site

Condition: excellent (used), Year of construction: 2002, The KSF-2E is the world’s leading specialized CNC milling machine for fully automated production and complete machining of high-quality cross joints and grids in the serial manufacturing of glazing bars for windows and doors. Thanks to its dedicated aggregates, the machine produces cross joints from wood, aluminium, MDF, or PVC with outstanding quality and precisely processes all components of the glazing bar grids. Fsdpfx Ajxl Dnajfijgh OPERATIONS: • Cross joints in various designs and sizes • End processing of glazing bars • Cutting frame profiles to size The machine is additionally equipped with a transverse feed/magazine for components.

Condition: like new (used), Year of construction: 2014, functionality: fully functional, crusher SG - 500/200 - the crusher is completely overhauled and ready for operation Fgodpowhw Iuofx Afieh - the crusher is also equipped with a vibrating conveyor 8 m long with a separation where sawdust is separated and equipped with a magnet with metal detection in the attachment you will find technical parameters for the machine ¨ - electrical switchboard for the machine.

Condition: used, Year of construction: 2003, For sale is a Fröhling Turbomatic wood chip heating system. Year of manufacture: 2003 with 35kW output. Includes discharge unit and attachments. The feed auger has a length of approx. 3.60 m. The agitator has a diameter of 1.0 m and is suitable for rooms up to 3.80 m x 3.80 m. Fodpfxjw Ryd Ne Afisgh The gearbox of the stoker auger is defective. Otherwise, the wood chip heating system is operational. The seller excludes any warranty for the purchased item. The item is sold as-is, without any guarantee of suitability for a particular purpose or freedom from defects. The buyer confirms that he has inspected the item prior to purchase and is satisfied with its condition. The seller accepts no liability for damages resulting from the use of the item. Any claims by the buyer against the seller are excluded.

Condition: new, Year of construction: 2025, Device description The splitter has an overload valve that drains oil to the tank and an efficient, failure-free gear pump. The tree lifting system makes it easier to place heavy materials directly under the splitting wedge 5-pin power connection The wedge set at an angle makes it easier for the wedge to sink into the material. FAILURE-FREE HYDRAULIC PUMP 24l! Technical parameters Pressure force 22 TON Minimum wood diameter 80 mm Maximum wood diameter 700 mm Minimum wood length 350 mm Fgodpfx Afownxcmoioh Maximum wood length 1100 mm Splitting speed (continuously adjustable) 10.5 cm/s Return speed 7.5 cm/s Wedge stroke length 948 mm Total engine power (S1;S6) S1:5.1 kW S6: 6.6 kW Voltage 400 V Hydraulic tank capacity 24 l Hydraulic system pressure 27.7 Mpa Dimensions 1050 x 1550 x 2500 mm Weight approx. 320 kg

Condition: good (used), Year of construction: 2022, Type of fuel: Petrol Empty weight: 1.450 kg Technical condition: good Visual appearance: good Water tank volume: 30 l Transport dimensions (LxWxH): 0,267x0,118x0,239 Please contact Christian Theißen for more information Manufacturer: Först Model: TR6D Year of build: 2022 Condition: Used Data: Roller diameter: 150 x 200 mm Total dimensions LxWxH: 2,67 x 1,18 x 2,39 m Drive type: Benzin, 31,3 kW/ 42 PS Dimensions funnel WxD: 3405 x 2627 mm Fgedpfxjxgp H Dj Afieh Hopper loading height: 2295 mm Engine: Doosan Tank volume: 30 Liter l Weight: 1.450 kg Special features: Caterpillar shredder with chain drive. Feed roller system: FörstGrip, flywheel system: top open flywheel (640x25 mm) Two 8" knives, no-stress system: Auto Intelligence, feed system: Auto Intelligence, fully water and vibration-proof touchpads. Noise level: Lwa 121dB. Price on demand Location: 41468 Neuss: immediately available

Condition: good (used), Year of construction: 1999, Chipper with inclined feed, suitable for roofers and carpenters, ideal for shredding roof battens with nails. Max. feed opening: 400 x 80 mm Slow speed: 250 rpm Motor: 18.5 kW Large rotor diameter Large knives 40 x 40 mm, set diagonally Fsdsxlm Ntjpfx Afiogh

Condition: used, Year of construction: 1995, Technical details: Fsdpfx Aou Szfusfiegh punching pressure: 25 (250kN) t pass through width: 1800 (1660 nutzbar) mm daylight between the columns: max./min.: 155 / 25 mm stroke: Stanzhub: 130 mm total power requirement: 5,0 kW weight of the machine ca.: 2,0 t Dimensions (LxWxH): 2,3 x 1,0 x 2,2 m Hydraulic trolley beam punch hydrl. pressure 250 bar Punching table area = 1830 x 500 mm Punching trolley/plate = 500 x 500 mm; travel speed = 800 mm/sec.; punching stroke = 63 mm/s, forward/return 125/125 mm/sec. Operation via control panel and pressure switch/control lever Equipment: 2x feed rollersØ 120 x 1630mm pneumatic close/open *