Used Wood Chipper for sale (5,552)

Condition: excellent (used), CATALOG NUMBER 7614 Technical data: - Inlet width: 550 mm - Inlet height: 220 mm - Shaft width: 630 mm - Knife length: 630 mm - Number of knives: 2 pcs - Sieve dimensions: 60x60 mm - 2 lower toothed feed shafts - Lower shaft motor approx. 1.5 kW - Upper toothed feed shaft - Upper shaft motor approx. 1.5 kW - Vibrating chute - Vibrating chute length: 4750 mm - Vibrating chute width: 450 mm - Main motor: 45 kW - Vibrating chute motor: 1.5 kW - Auto-reverse - Reverse mode - Overall machine dimensions L/W/H: 3200x1700x1400 mm - Overall machine dimensions L/W/H: 4750x800x1100 mm - Weight approx.: 4500 kg ADVANTAGES – Auto-reverse (adjustable) – Reverse mode – Used chipper, in very good condition Lrsdswa Am Hepfx Ad Nog Net price: 120,900 PLN Net price: 28,780 EUR (depending on the 4.2 EUR exchange rate) (Prices subject to change with significant exchange rate fluctuations)

Condition: excellent (used), Catalogue number 7374 TECHNICAL DATA - Upper feed hopper dimensions (L/W): 840x620 mm - Lower feed hopper dimensions (L/W): 300x300 mm - Rotor width: 340 mm Lrjdpfx Asx Tpnqjd Neg - Motor: 22 kW - Screen: 15 mm - Number of knives: 6 pcs - Discharge for shredded wood: Ø 160 mm - Dimensions (L/W/H): 1400x800x2000 mm - Weight: 840 kg ADVANTAGES – German-made – Very good condition – Used wood chipper Net price: 23,900 PLN Net price: 5,690 EUR based on an exchange rate of 4.2 EUR (Prices may vary significantly with currency fluctuations)

Condition: good (used), axle configuration: 3 axles, first registration: 07/1997, loading space length: 13,500 mm, loading space width: 2,500 mm, loading space height: 2,650 mm, suspension: air, color: brown, Year of construction: 1997, Equipment: tail-lift, Axle configuration Make axles: BPW Brakes: drum brakes Suspension: air suspension Rear axle 1: Lift axle Weights Lrodpfxox Tpiuj Ad Nsg Empty weight: 8.990 kg Carrying capacity: 30.010 kg GVW: 39.000 kg Functional Tail lift: DHOLLANDIA DHSMR, slider lift, 2000 kg Condition Technical condition: good Visual appearance: good Additional information Please contact Arie or Pedro for more information

Condition: excellent (used), Year of construction: 2009, HOLZMA cross-cutting unit for dividing panel offcuts, such as those produced by angular cutting lines – part of the automatic waste disposal system for panel sizing lines. TYPE HRZ 540 Year of manufacture: 2009 Machine no. 0249083537 Lrjdpfx Aeyay Iged Neg Trim and edge cut waste falls down through the waste flap into a vibrating chute. This transports the offcuts to a chipper (cross-cutting unit). From there, the shredded waste is conveyed, for example via a waste incline belt, into a scrap bin.

Condition: used, New: Yes Please contact us for more information. Lsdpfsyawy Tex Ad Nsrg

Year of construction: 2010, condition: ready for operation (used), Main Drive Number of axis 5 This 5-axis BIESSE ROVER C9.5 was manufactured in 2010. It features a large working area (X=4600 mm, Y=1935 mm, Z=275 mm), 25 vertical and 6 horizontal spindles, and a 5-axis electric spindle (11 kW HSK F63). It boasts high travel speeds (X/Y: 100 m/min, Z: 30 m/min) and a total installed power of 35.7 kW. If you are looking to get high-quality woodworking capabilities, consider the BIESSE ROVER C9.5 machine we have for sale. Contact us for more information. Application Types CNC Wood Machining Lrjdpfx Adox Tka Us Nsg

Condition: excellent (used), Catalogue number 7687 TECHNICAL DATA - Inlet width: 540 mm - Inlet height: 300 mm - Shaft width: 630 mm - Shaft diameter: 700 mm - Knife length: 630 mm - Number of knives: 2 pcs - Screen size: 40x40 mm - Bottom driven serrated shaft - Lower shaft motor: 4 kW - Top driven serrated shaft - Upper shaft motor: 4 kW - Belt feeder Lredpex Tg Hdjfx Ad Neg - Feeder belt length: 4720 mm - Feeder belt width: 500 mm - Main motor: 75 kW - Autoreverse (adjustable) - Overall machine dimensions (L/W/H): 3100x2000x1830 mm - Overall feeder dimensions (L/W/H): 4800x780x980 mm - Weight: approx. 5000 kg ADVANTAGES – German-made – Autoreverse – Used chipper, in very good condition Net price: 120,900 PLN Net price: 28,780 EUR depending on exchange rate at 4.2 EUR (Prices may vary in case of significant fluctuations)

Condition: like new (used), Year of construction: 2021, As-new Vecoplan VTH 250x650 HxB shredder Power: 75 kW Ljdpfx Adjyat Duo Njrg Cassel metal detector Approx. 40 linear meters of vibratory troughs

Condition: excellent (used), Year of construction: 1998, operating hours: 3,000 h, functionality: fully functional, power: 18.5 kW (25.15 HP), overall weight: 2,150 kg, Very well-maintained machine in top condition with low operating hours Electronic soft start, idle shutdown Mawera RZM 200 Motor power: 18.5 kW Rotor width: approx. 800 mm Rotor speed: 135 rpm Hydraulic pusher with PLC control Chipping capacity approx.: 500-850 kg/h Screen: 20 mm Extraction outlet left or right: 210 mm Original paint Weight: 2,050 kg The machine is installed under a joinery line and has only processed clean wood Last maintenance: 12/2024 Ledpfjyar Hzsx Ad Nerg Loading possible Comparable to Weima, Untha, Reinbold, Zeno,

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 500-5512, axle configuration: 1 axle, Equipment: type plate available, We are selling a Weima WLK 6 S shredder together with a Koppern grinder and transport system. Year of manufacture: 2002. For more information, please contact us. Lrsdpfx Asyan Nljd Njg

Condition: reconditioned (used), Year of construction: 1998, functionality: fully functional, Fully automatic package jointing line 500 mm Packaging width - Consisting of: - Finger jointing Central Milling Machine Lrjdpfolatv Aex Ad Nsg - 2 fixed transport tables - 1 Wheeled processing unit - 2 milling spindles - 2 flakers - Glue - Separating station with tilt-back - Threading section 2 transport chains - Feed with double rollers - Extrusion press 12 ton - crosscut - Packaging width 500 mm - wood in max. 1950 mm - wood in min. 200 mm - Workpiece 50-215 mm - Workpiece thickness of 25 to 100 mm - Performance 2,5- 3 tables / min - Press force max. 12000 kp - Length of the threading section 3900 mm - Lenght of the press bed 5000 mm - wood with fingerjoint endless - Engine performance milling spindle 2x18,5 kW - Engine chipper 2x 7.5 kW

Year of construction: 2020, operating hours: 1,050 h, condition: used, Serial number: 2292xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21978 Specifications: 2020 model Hours: approx. 1050 Chassis (see photos) Remote control Shaft set for concrete and wood Includes equipment for installing a magnetic belt AdBlue is disconnected Delivery by agreement Description:2020 Arjes Evo waste shredder.One shaft set for wood and one for concrete.See video.Delivery by agreement. Ljdjx Dg Utspfx Ad Njrg Hours: 1050 Own weight: 11 Model: Evo Avfallskvern. For betong og treverk! SE VIDEO.

Year of construction: 2017, condition: used, Serial number: 17090xxxx Please contact ATS Norway for more information Please provide reference number upon request: 22089 Description: Lrjdpfox I U Uxox Ad Nsg We have a 2017 Magsi Rateau wood gripper w/s70 mount for sale. Everything works as it should, according to the owner. Ready for delivery Model: Rateau wood griper m/s70 feste

Condition: used, machine/vehicle number: XLER6X2000512xxxx, mileage: 1,405,000 km, Year of construction: 2006, Please contact ATS Norway for more information Please provide reference number upon request: 20683 Specifications: Model year: 2006 Mileage: approx. 1,405,000 km Transmission: Opticruise Suspension: Full air Tires: See photos Body: Vang body with hydraulic roof and side Tipping: Rear tipping Length: 870 cm Width: 255 cm Lredpfx Aswqwlrsd Njg Wheelbase: 410 / 136 cm Curb weight: 12,590 kg Engine power: 500 hp Fuel type: Diesel Equipment: Tool compartment Slirej sand spreaders Bull bar Auxiliary driving lights 2x bunk beds Radio/CD Air conditioning / climate control Description:Scania R500 wood chip truck with Vang body, hydraulic roof, and hydraulic side opening.EU-approved until 07.10.2025.A matching chip trailer is available for an additional cost – see photos. The truck is ready for delivery. Km: 1405000 HK: 500 Technical approved: no EU-approved until: 07.10.2025 Own weight: 12590 Total Weight: 27000 Payload: 14335 Width: 255 Length: 870 Euro: 3 Model: R500 Gearbox: Automatic

Condition: used, Year of construction: 2008, Wood chip heating system with 100 kW heating output. Feed screw (as seen from the front) on the left. Ash container on the right. With discharge system for a room diameter of 6 m. Already dismantled. Becoming available due to connection to district heating. Loading onto truck included. Lredpfx Adeyalbls Njg

Condition: good (used), Year of construction: 1992, Chipper with hydraulic walking floor Rotor width 700 mm Motor 11 kW Screen with 16 mm perforation No PLC installed yet Partially overhauled Lodpjwv Hmvsfx Ad Norg New rotor bearings

Condition: used, axle configuration: 3 axles, first registration: 11/2005, loading space length: 13,600 mm, loading space width: 2,470 mm, loading space height: 2,790 mm, total length: 13,900 mm, total width: 2,600 mm, total height: 4,000 mm, suspension: air, tire size: 385/65R22,5, color: other, Year of construction: 2005, Equipment: ABS, = Additional Options and Accessories = - EBS = Remarks = Number of axles: 3, unladen weight: 7,580 kg, gross weight: 39,000 kg, chassis type: complete chassis, chassis material: steel, kingpin size: 2 inch, suspension type: full air, ABS, EBS, body year: 2005, sliding roof, axle type: BPW = Further Information = General Information Cab: Day Registration number: KLEYN1 Driveline Fuel type: Diesel Transmission Gearbox: Manual Axle Configuration Tyre size: 385/65R22.5 Brakes: Drum brakes Suspension: Air suspension Axle 1: Tyre tread left: 6 mm; Tyre tread right: 9 mm Axle 2: Tyre tread left: 5 mm; Tyre tread right: 6 mm Axle 3: Tyre tread left: 7 mm; Tyre tread right: 8 mm Weights Unladen weight: 7,580 kg Payload: 31,420 kg Gross Vehicle Weight: 39,000 kg Functional Sliding roof: Yes Environment Emission class: Euro 0 Maintenance APK (Vehicle Inspection): valid until 09.2026 Condition General condition: average Technical condition: average Optical condition: average Damage: none = Company Information = Kleyn Trucks is one of the world’s largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range includes all European brands of various model years and price classes. Why buy at Kleyn Trucks? It's simple! • Large, fast-changing stock • Recognisable quality • Good price Lrjdpfxex S Uzao Ad Neg • Professional business conduct • We speak many languages • We understand our customers • Assistance with import and transport • (Export) license plates arranged quickly • Expert technical services • The security of ‘recognisable quality’ • And more.... Please visit our website for special offers and full stock list: Leasing via Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send a request via our website. Ask directly about our European warranty package.

Year of construction: 2019, condition: ready for operation (used), This 5-axis COSMEC CONQUEST 515/13 was manufactured in 2019. A robust CNC Wood Machining Centre, it features a working area of 6210 × 1650 mm, dual motorization on a closed gantry structure, and a spindle power up to 18 kW. It supports tool changes with multiple configurations and is compatible with ALPHACAM and ASPAN software. Consider the opportunity to buy this COSMEC CONQUEST 515/13 CNC Wood Machining Centre. Contact us for more information about this machine. Application Types CNC Wood Machining Lrodpfjx S Si Ijx Ad Njg

Condition: repair required (used), Old Bruks chipper drum and partly body. Good project for building - re-chipper for small pellet or briquet factory. Lrjdpfx Asq E N U Usd Nsg

Condition: excellent (used), Year of construction: 1990, operating hours: 50 h, functionality: fully functional, overall weight: 1,000 kg, Disc chipper with 2 knives. Tractor PTO driven. Lredex Dzdiepfx Ad Nsg

Condition: excellent (used), Year of construction: 1974, Catalogue number 7685 TECHNICAL DATA - feed opening width: 440mm - feed opening height: 300mm - shaft width: 480mm - shaft diameter: 440mm - number of knives: 2 pcs - screen size: 50x50mm Lredpjx S Nbuofx Ad Neg - toothed feed roller from top and bottom - shaft motor: 0.78/1.1kW - electric auto-reverse (adjustable) - with conveyor belt - feed belt length: 4006mm - feed belt width: 380mm - belt feed forward/reverse - main motor: 30kW - dimensions (L/W/H): 6100x1100x1100mm - weight approx. 2000kg ADVANTAGES – German-made – with conveyor feeder – auto-reverse – used chipper, in very good condition Net price: 76,900 PLN Net price: 18,300 EUR depending on the exchange rate of 4.2 EUR (Prices may change with significant fluctuations)

Condition: excellent (used), Catalogue number 7321 TECHNICAL DATA - Max workpiece height: 90 mm - Max workpiece width: 130 mm From above: - Sliding belt - Sanding units – 2 brushes - Brush motors: 2 × 0.55 kW - Manually adjustable brushes (up/down) From below: - Feed belt - Sanding units – 2 brushes - Brush motors: 2 × 0.55 kW - Manually adjustable brushes (up/down) From the side: - Sanding units – 2 brushes - Brush motors: 2 × 0.55 kW - Manually adjustable brushes (up/down, front/back + angle) - Brush diameter: 220 mm - Stepless speed adjustment of sanding units via inverter - Stepless feed belt speed adjustment - Feed motor: 0.55 kW - Pull-out support table - Extraction port diameter: 3 × 120 mm - Overall dimensions (L/W/H): 2200 × 1200 × 1400 mm Lrjdpfx Asx S Iwhod Neg - Weight: 672 kg ADVANTAGES – Italian-made – 6 sanding units – Used sander – In very good condition Net price: 22,900 PLN Net price: 5,450 EUR (based on exchange rate of 4.2 EUR) (Prices may vary according to larger exchange rate fluctuations)

Condition: excellent (used), functionality: fully functional, motor power 11kW bin dimensions 940x700mm hydraulic pressure unit Lrodpfx Aoyabb Ujd Njg shaft length 700mm shaft speed 110 RPM capacity 180-220 kg/h

Condition: new, Year of construction: 2026, Yanigav Log Splitter FB90 Lrodpfx Ajr D Nhmod Njg • Weight: 1080 kg • Force: 32 t • Drive: Hydraulic pump • Log length: up to 115 cm • Log diameter: 30-80 cm • Wedge length: 45 cm

Year of construction: 2026, condition: new, With the separation of milled lumber, laid loose or as a package, already milled lumber can be processed economically. In a two-stage process, the lumber is separated for further processing. It is also possible to insert the separated lumber in a controlled manner in a running process. Lredpsg Rxhgsfx Ad Neg The feeder is mechanically designed in such a way that even crooked logs can be fed in safely. In addition, it can be adjusted to the diameter of the wood so that only one piece is transported further, thus avoiding stoppages in the further process.