Used Wood Chipper Shredder for sale (6,707)

Condition: new, Year of construction: 2023, functionality: unexamined, overall weight: 0 kg, Müteck wood shredder MRZ1530 with 55 kW motor. Dsdpfeyt Rriox Aiwsut Brand new, unused Only the shredder is for sale.

Condition: used, Untha LR700 shredder Duodpfx Aieyt Htpowot 18.5 kW motor, rotor length: 700 mm, 21 knives on the rotor, hydraulic drawer, 15 mm screen, autoreverse, Knives in good condition.

Condition: refurbished (used), Year of construction: 2002, functionality: fully functional, power: 45 kW (61.18 HP), overall weight: 4,700 kg, color: grey, Maximum chipping height: mm 200 Feed-in width: mm 650 Feed rollers: units 3 Rotor fly circle: mm 600 Chip length approx.: mm 20–30 Output capacity: 18–22 cubic meters/hour of wood chips Chipping knives: units 2 Feed motors: kW 2 x 3 Net weight approx.: kg 4700 Dusdoynzg Hopfx Aiwot Feed: horizontal Machine frame: steel, gas-shielded welded Rotor: steel, gas-shielded welded, dynamically balanced Bearings: oversize roller bearings Bearing housing: steel, flange housing Feed rollers: steel, special toothed Chip discharge: located below the machine Machine grate: (sieve) for post-shredding of oversized pieces Drive pulley: matched to main motor, N = 1500 rpm Hydraulic system: comprising hydraulic pump, diaphragm accumulator, cylinder, pressure gauge, control valves for lifting the upper feed roller Feed system: by 2 geared motors, manufacturer NORD GETRIEBE

Condition: used, Year of construction: 2019, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, Crusher/chipper Vecoplan VHZ 1300, hammer mill CPM, fan and cyclone filters JFK. The machine is in good condition, has only been in operation for about 50% of one year. The line is complete with all conveyors. Djdeympx Uspfx Aiwsut

Condition: used, functionality: fully functional, – German-made – with belt feeder – autoreverse TECHNICAL SPECIFICATIONS: – feed opening width: 400 mm – feed opening height: 120 mm – main motor: 30 kW – number of knives: 4 pcs. – rotor diameter: 420 mm – rotor length: 420 mm – screen: 30 x 30 mm – upper driven toothed shaft: 1.1 kW – lower driven toothed shaft: 1.1 kW – feeder length: 1700 mm Dodpfswtzr Uox Aiwjut – feeder width: 410 mm – autoreverse – transport dimensions (L/W/H): 360 x 140 x 120 cm – weight: ~1500 kg

Condition: good (used), Year of construction: 2010, functionality: fully functional, Goliath Shark 60 chipper Dsdpfx Aiot U Aaajwjut - year of manufacture 2010 - manufactured in Germany - new set of knives and counter-knife TECHNICAL PARAMETERS: - rotor width 600 mm - engine power 18.5 kW - number of knives 30 pieces - lace knife 30x30 - height of drawer 170 mm - diameter of screen 12 and 15 mm - autoreverse - dimension of hopper 600x830 mm - spigot diameter 160 mm Transport dimensions 180x130x170 cm weight ~ 1300 kg

Condition: ready for operation (used), functionality: fully functional, LINDNER wood chipper for sawmill offcuts, model T 400/140-2 – after technical inspection – in very good condition – suitable for producing technological wood chips TECHNICAL SPECIFICATIONS: infeed width: 400 mm infeed height: 140 mm rotor diameter: 450 mm rotor length: 400 mm main motor power: 33 kW infeed motors power: 2 x 1.5 kW number of knives: 2 pieces screen dimensions: 60 mm x 90 mm infeed rollers in very good condition Dedpfxor Ak Rge Aiwsut feeder motor power: 1.5 kW feeder length: 4,200 mm transport dimensions (L/W/H): 430 / 240 / 150 cm weight: approx. 2,000 kg

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, power: 18.5 kW (25.15 HP), color: blue, Shredder Type GHZ 600 Factory overhauled, V-rotor Feed width: 300 mm Maximum feed height: 70 mm Working width of rotor: 300 mm Rotor diameter: 252 mm Rotor speed: 600 rpm Cutting system: 14 knives, 40 x 40 mm Screen perforation: 25 mm Control cabinet: fully wired, incl. 5 m cable Motor output: 18.5 kW Electrical connection: 400 V +/- 5% / 50 Hz Extraction port Ø: 200 mm Overall dimensions approx.: L = 1,800 mm, W = 1,230 mm, H = 1,640 mm Weight: approx. 1,300 kg Duedpfx Aeymb Ubjiwet Includes: • PLC electrical control (Moeller / Siemens); star-delta starting • Load-dependent material feed via top-mounted feed roller • Machine frame on anti-vibration rubber mounts • Patented V-rotor with milled knife pockets in the profile • Welded knife carriers and bolted knives with recessed knife screws • Machine prepped for on-site extraction system (extraction port Ø 200 mm)

Condition: new, Year of construction: 2026, Engine power 18,5 kW rotor diameter 248mm Dusdpfenzh T Tox Aiwst Number of cutting edges 17 pieces indexable inserts Feed opening 624 x 792mm Suction nozzle 160mm left or right suction possible weight approx. 1300 kg Perforated screen 15/20mm Outer dimensions approx. 1740 x 1220 x 1670mm LxWxH

Condition: ready for operation (used), functionality: fully functional, For Sale: Massey Ferguson 7726 + MUS-MAX WT9XLZ Wood Chipper Dujdpfeylv Rzex Aiwst Package price: EUR 135,000 (excl. VAT) _____ 🚜 Massey Ferguson 7726 • Year of manufacture: 2017 • Engine hours: 8,170 • Price: EUR 60,000 (excl. VAT) • Power: 255 hp rated / 280 hp max • Front linkage • Front axle suspension • Air-suspended comfort operator seat (360°) • Regularly serviced • Engine oil changed every 250 hours • Transmission: Dyna-6, 50 km/h • Load-sensing hydraulic pump: 200 l/min • 4 double-acting hydraulic outlets with mechanical control • Rear fender lift control • Electronic Linkage Control (ELC), 9,950 kg lift capacity • PTO: 540 / 1000 rpm • Air brake system for trailer _____ 🌲 MUS-MAX WT9XLZ Wood Chipper • Year of manufacture: 2009 • Operating hours: 12,170 • Wear parts replaced regularly • New tires • Tower-mounted camera • Additional LED lighting • Fully operational – still in daily use

Condition: new, Year of construction: 2026, production time appr. 4 months * for suction perception, see picture 4 and 5 Tariff number: 84659600 Main motor: 55 kW; 400 V - 50 Hz - 3 ph including turbo coupling, Hydraulic motor: 2.2 kW, 400 V - 50 Hz - 3ph Knife: 76 pieces, rotatable Dsdpsd Hkqhjfx Aiwout Knife size: 35 x 35 x 20 mm Rotor diameter: 360 mm Control: PLC Siemens S7-1200 Funnel opening approx. 1530 x 1235 mm Hopper volume approx. 2.5 square meters hydraulically operated slide Screen perforation: 10 - 30 mm Extraction nozzle Ø 200 mm Weight approx. 4,500 kg Dimensions (lxwxh) approx. 2765 x 2520 x 1730 mm Turbo coupling Included as standard: - V-rotor for other throughput - 2nd row of knives on the rotor - Control cabinet with Siemens PLC control - automatic star / delta start - fast hydraulics - Automobile. OFF when the rotor is idling - Speed ​​70-90 rpm for high throughput - Clock control to avoid idle times - Performance-increasing step control of the hydraulic slide - Pertinax guides for hydraulic slides - anti-vibration machine feet - CE conformity The shredder is for shredding natural wood, chipboard and MDF board other materials after testing and approval by the manufacturer Recognition from the raw material: - The moisture content (atro) must be below 30% - Metals and mineral impurities such as sand, stones, etc. Interests to interests wear

Condition: new, Year of construction: 2025, The ideal machine for shredding hardwood and softwood Another machine now available (ex-works Neckartailfingen). Motor: 18.5 kW; 400 V - 50 Hz - 3 ph, Blades: 14+2 pieces, 40x40mm, reversible multiple times, Rotor diameter: 260 mm, Control system: Omron PLC, Cutting chamber opening: 600 x 800 mm, Hopper volume approx. 0.6 cbm, Hydraulically operated pusher Screen perforation of your choice (12 - 40mm) Extraction socket Ø 160 mm Weight approx. 1,300 kg Dimensions (LxWxH) approx. 1737 x 1167 x 1650 mm The following options are available at an additional cost: - Additional row of knives + €1,990 net (28 instead of 14) - Surcharge for segmented floor, 4-sided + €2,170 net (prevents the pusher from jamming. Recommended for materials with a thickness of less than 3 mm) - Raise shredder by 30 cm (preparation for conveyor belt) + €1,980 net - Angled conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overband magnet + €5,980 net - Control system for the conveyor belt and overband magnet + €2,750 net (start and stop synchronized with the shredder) - Special bearing + €1,540 net (rarely required. Closed, even more robust rotor bearing. May be considered for screens smaller than 15 mm or high fine content. Not necessary if bearings are greased approximately every 2 weeks in operation) Requirements for raw material: Dodpfxjd E R D So Aiwsut - The moisture content (atro) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. increase wear. We are happy to offer a free test with your material. We invite you to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material via freight company and we will document the test with photos and videos.

Condition: excellent (used), Gross Gaz 102 shredder/chipper 22 kW motor, rotor length 1020 mm, 50 knives on the rotor, Dodpfx Asylav Uoiwout hydraulic drawer, 15 mm screen, autoreverse, loading hopper inlet 1020 x 1500 mm The machine is in very good condition and fully performs its functions.

Condition: used, Year of construction: 2023, operating hours: 600 h, functionality: fully functional, power: 55.16 kW (75.00 HP), overall weight: 3,500 kg, The BBT 400 Woodzilla is a compact, powerful, and mobile drum chipper with aggressive feed, mounted on a 3.5-ton tandem trailer chassis and capable of 360° rotation. Technical Data Year of manufacture: 2023 Operating hours: approx. 600 hours Power: Diesel, Deutz TCD 2.9, 55 kW (75 HP), Stage 5 Feed opening: 320 x 500 mm Drum size: 400 x 500 mm, 4 knives Maximum log diameter: 32 cm Stabilisation: 4-way hydraulic support Z-crane Ben-Tele 550 Crane outreach: 5,500 mm Telescopic stroke: 1,100 mm Radio remote control for chipper and crane Brake system: Overrun brake Weight: 3,500 kg The machine is in good visual and technical condition. Location: North Rhine-Westphalia Dujdpfx Aijykzlzswet Availability: by arrangement Warranty: The machine is sold as-is at the time of delivery. The seller assumes no liability for defects. We reserve the right to prior sale, modifications, and repairs. Didn't find the right machine? Please contact us!

Condition: new, Year of construction: 2025, Year of manufacture: 2025/2 Dsdpevw Tw Eefx Aiwjut Engine power: 18.5 kW Speed: 90 1/min Weight: 1.3 tons Rotor lengths: 600 mm Rotor diameter: 252 mm Rotor knives: 28 pcs Funnel: 600 x 1050 mm with an extra-ribbed sliding plate

Condition: new, Year of construction: 2025, Year of manufacture: 2025/2 Engine power: 18.5 kW Speed: 90 1/min Duoderq Eu Repfx Aiwet Weight: 1.3 tons Rotor lengths: 600 mm Rotor diameter: 252 mm Rotor knives: 28 pcs Funnel: 600 x 1050 mm

Year of construction: 2026, condition: new, DESCRIPTION Horizontal drum chipper, engineered and built for maximum performance and reliability. This heavy-duty, robust machine is suited for the most demanding conditions and is ideal for processing all types of waste wood materials. The Varli VDC-1600 drum chipper features a large infeed opening, making it highly capable of processing waste wood material, logs, and wood bundles (diameters over 700 mm can be easily accommodated). The VDC-1600 can achieve outputs of approximately 100,000 kg per hour of high-quality pulp mill chips or finer fractions suitable for biofuel production. The chipper can also deliver coarser fractions, producing chips up to 200 mm in length (depending on configuration). Built with a heavy-duty frame, the chipper features over-sized, self-aligning bearings housed in steel casings, firmly secured to the chipper’s side structure for long service life and reliable operation. Equipped with 14 feed rollers fitted with special, wear-resistant, surface-hardened teeth, the VDC-1600 provides secure feed and optimised material throughput. The chipper comes standard with drum-mounted cutting tools made from Hardox, along with replaceable wear plates. OPERATING PRINCIPLE The VDC-series is designed to produce wood chips from logs or bark bundles. Material is horizontally fed by vibrating chute into free-floating feed rollers, which automatically adjust to the material’s height. The feed rollers securely grip and transport the material into a high-speed rotating drum armed with solid knives, fixed with centrifugal wedges—fostering durability, preventing knife damage, and minimizing downtime during tool changes. The rotor knives are easily accessible and can be re-sharpened multiple times. Key features include an adjustable stator knife, hydraulic hood, and hydraulic device for stator knife exchange. Dusdpfx Aisyi H Ryjwet BENEFITS - Extremely robust construction and heavy-duty design for stable operation - Centrifugal wedge knife mounting for reduced machine downtime - Adjustable stator knife to extend operating life - Hydraulic hood for swift and easy maintenance TECHNICAL DATA Model: VDC-1600 Infeed Width: 1250 mm Rotor Diameter: 1600 mm Number of Infeed Rollers: 14 Number of Cutting Tools (Knives): 4 Drive Motor(s): 2 x 400 kW Electrical Supply: 400V, 3Phase, 50Hz Fraction Output: 60 mm (SPF), approx. 100,000 kg/h Total Weight: 96,000 kg

Condition: ready for operation (used), Drum chipper for production of cellulose chips or fuel chips. The chipper is feeded from a vibro conveyor and feeding bin. Included is also Bruks chip screen type Bruks BS3. Electrical motor 75 kW. Capacity up to 60 m3 ready made chips per hour. Dedoyh Umwepfx Aiwjut Infeed opening , width 540 mm, height 300 mm

Condition: new, Year of construction: 2026, Aluminum Angled Conveyor Belt with Substructure including adjustable feet and machine feet for leveling uneven surfaces Horizontal section: 2,500 mm Inclined section: 6,000 mm Incline angle at the bend: 45° Height of the horizontal section: 350 mm Total conveyor length measured on the floor: 6,750 mm Discharge height at the end of the conveyor: 4,500 mm Design: Aluminum construction - Double profile reinforced 90x45 mm - Full-surface discharge sheet 2.0 mm galvanized Drive drum and return drum S235 steel, welded and machined Ø100x620 mm crowned and turned, shaft fixed with pillow block bearings. Drive: Shaft-mounted gear motor 1.10 kW, belt speed: 0.53 m/sec Electrical connection 230/400 V, 50 Hz, IP54 protection class Drive supplied ready for connection up to the motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 10/2 0+005 PU including wave edge PU petrol matte Belt width: 600 mm 2 pcs wave edges 50 mm high, 25 mm wide, high-frequency welded 42 pcs T-40 cleats, 400 mm long, approx. 401 mm spacing Belt material: 2-ply, highly cross-stable In the bend area, the belt is guided on both sides by 3 hold-down rollers each. The belt features a 70 mm edge-free zone on both sides. Due to the wave edges, the usable belt width is reduced: Usable width: 300 mm, as follows: (top view) cross section 70+25+5+400+5+25+70 mm Special features: Belt guidance via PVC wedge strip on the running surface profile - 10x6 mm - Including widened substructure for improved stability against top-heaviness - Including cut-out in the discharge sheet - Including sliding guides in drive and return drums - Including magnet-free zone in the area of the overbelt magnet separator - Including bracket for DMPM1200 in the inclined section Discover customized solutions for your industry! As an innovative mechanical engineering company, we are proud to offer tailor-made solutions for the recycling, food, and further processing industries. Our comprehensive product portfolio includes everything from conveyor belt systems, flat conveyors, inclined conveyors, and angled conveyors to Z-conveyors. In addition, we manufacture feed hoppers, magnetic separators, overband magnet separators, drum magnets, and dosing bunkers – all custom-built to our customers' specific requirements. We understand that each industry and project is unique. That is why we individually adapt our solutions to your specifications and requirements. Complex projects are an exciting challenge for us, and we look forward to developing innovative solutions together with you. For us, there are no special designs – we find the right solution for every challenge! Dujdpfx Ajyhzhzoiwst Put us to the test! Contact us and discover how we can transform your requirements into bespoke solutions. Let’s shape the future of your production processes together! Conveyor belt, conveyor system, discharge belts, belt conveyors, magnetic separator, overband magnet separator, recycling, wood chips, plastics, metal-free, metal detection, neodymium, overband magnet, magnetic belt separator, lifting magnets, filter rods, magnetic grids, magnetic grates, metal separator, block magnet, filter systems, dosing hoppers, feed hoppers, filling systems

Condition: new, Year of construction: 2026, Aluminum angled conveyor with substructure Including adjustable feet as well as machine feet for leveling uneven surfaces Horizontal section: 3,500 mm Inclined section: 2,100 mm Inclination angle at bend: 45° Total conveyor length measured on the floor: 5,000 mm Discharge height: 2,000 mm Height of horizontal section: 500 mm Design: Aluminum structural construction - Triple-reinforced profile 135x45 mm - Full-surface discharge sheet 2.0 mm, galvanized Drive drum + tail drum made from S235 steel, welded and machined Ø150x820 mm, crowned, shaft mounted in plummer blocks. Drive: Shaft-mounted gear motor 1.1 kW, belt speed 0.77 m/sec Connection 230/400V, 50Hz, protection class IP54 Drive prewired to motor terminal box (Commissioning must be performed by qualified electricians) PVC conveyor belt DM 15/4 0+007 PVC including PVC wave edge, green Belt width: 800 mm 2 pcs. wave edges, 80 mm high, 50 mm wide, high-frequency welded 32 pcs. T-50 cleats, approx. 355 mm spacing Belt material: 2-ply, especially cross-stable At the bend, the belt is guided on both sides by 3 hold-down rollers each. The belt features a 70 mm edge-free zone on each side. Due to the wave edge on both sides, the usable belt width is reduced: Usable width: 490 mm, calculated as follows: (top view) transverse arrangement 100+50+5+490+5+50+100 mm Discover custom solutions for your industry! Djdpfx Aoyhzhueiwsut As an innovative mechanical engineering company, we are proud to offer tailored solutions for the recycling, food, and processing industries. Our extensive product portfolio ranges from conveyor systems and flat conveyors to incline conveyors, angled conveyors, and Z-conveyors. In addition, we manufacture feed hoppers, magnetic separators, overband magnetic separators, drum magnetic separators, and dosing bunkers – all according to our customers’ specific requirements. We understand that every industry and project is unique. That’s why we customize our solutions to your individual needs and specifications. Complex projects are an exciting challenge for us, and we look forward to working with you to develop innovative solutions. With us, there is no such thing as a special solution – we find the right solution for every problem! Challenge us! Contact us and discover how we can transform your requirements into customized solutions. Together, we will shape the future of your production processes! Conveyor, conveyor system, discharge belts, belt conveyor, magnetic separator, overband magnetic separator, recycling, wood chips, plastics, metal-free metal detection, neodymium, overband magnet, magnetic belt separator, lifting magnets, filter rods, magnetic grids, magnetic grate, metal separator, block magnet, filter systems, dosing bunker, feed bunker, filling systems

Condition: new, Year of construction: 2026, functionality: fully functional, Aluminum Z-conveyor belt with base frame, including adjustable feet and freely swiveling transport castors with parking brakes. Horizontal section: 800 mm Inclined section: 3,000 mm Second inclined section: 1,200 mm Angle of incline at each bend: 60° Total conveyor belt length measured on the floor: 3,500 mm Height of the horizontal section: 400 mm Design: - Aluminum construction with 2x reinforced profile, 90x45 mm - Full-surface discharge sheet, 2.0 mm, galvanized - Drive roller and deflection roller made from welded and machined S235 steel - Ø100x720 mm crowned turning, shaft fixed with pillow block bearings Drive: Parallel shaft geared motor 1.10 kW, belt speed: 0.53 m/sec Connection: 230/400V, 50 Hz, protection class IP54 Drive wired ready for connection up to the motor junction box (commissioning must be performed by a qualified electrician) PU conveyor belt DM 10/2 0+005 PU, including wave edge PU, petrol matt finish, AS, especially cross-rigid with hard cover Dujdpfeyhzhnjx Aiwet Conveyor belt width: 700 mm 2 pcs. wave edges, 50 mm high, 25 mm wide, high-frequency welded 34 pcs. T40 cleats, centered, 430 mm long, spacing approx. 299 mm Belt material: 2-ply, especially cross-stable At each bend, the belt is guided on both sides with 3 hold-down rollers each. The belt is manufactured with a 70 mm edge-free zone on each side. Due to the wave edge on both sides, the usable belt width is reduced: Usable width: 500 mm, determined as follows: (top view) Cross-section 70+25+5+500+5+25+70 mm Belt guidance via PVC V-guide on the running surface, profile 10x6 mm - Includes cut-out in the discharge sheet - Includes slide bushings in the drive and deflection rollers

Condition: good (used), Year of construction: 2004, operating hours: 15,660 h, functionality: fully functional, color: orange, For sale: Doppstadt DZ 750 Kombi – slow-speed shredder + high-speed chipper. The machine is accident-free. - Year of manufacture: 12/2004 - Mercedes-Benz diesel engine - Operating hours: 15,660 mth - Weight: 46 t - Magnetic separator - Possibility to use different shredding screens - Machine after inspection/service Dujdpfx Aioygr Tnewjt - Tyre condition: 70% - Tyre size: 385/65R22.5 - Easy operation The machine is in continuous use. Please contact for further information.

Condition: like new (used), Year of construction: 2012, power: 18.5 kW (25.15 HP), Rotor 260 mm Feed opening approx. 630 x 830 mm Rotor length approx. 630 mm Motor: 18.5 kW Number of knives: 30 Screen present Overhaul: - new motor incl. installation - new slide guide rails - calibration of the slider - new knives - new counter knives - completely new rotor - hydraulics checked / wear parts replaced Duodpfxeyfw D Ns Aiwjt - new flange bearing UCF 214 - new paintwork - adjustment / test run

Condition: used, Year of construction: 2019, MAXIMUM CHIPPER DIAMETER: 250 MM ENGINE POWER: 75 kW GRINDING DRUM WIDTH: 640 MM GRINDING ROLLER DIAMETER: 660 MM Djdpfxeyffi To Aiwout UPPER ROLLER WIDTH: 640 MM MAXIMUM OPENING OF UPPER ROLLER: 600 MM KNIVES ON MACHINE: 3 FEED ROLLERS: 2

Condition: excellent (used), functionality: fully functional, motor power 7.5 kW hydraulic pressing drawer hydraulic pump motor power 1.5 kW hopper dimensions 870x425 mm Dodpfeydpwrox Aiwjut screen 15 mm container with opening sensor CE marking technical documentation year of manufacture 1996