Used Wood Band Saw for sale (13,013)

Condition: excellent (used), Year of construction: 2020, power: 1.5 kW (2.04 HP), total height: 2,000 mm, total length: 1,930 mm, total width: 1,610 mm, Band saw PILOUS - ARG 235 Plus Bandsaw mitre cutting left & right Ø 235 Optional roller conveyor D-300 x 2000 mm = EUR 550(6 rollers / 60 diameter / 300 Kg load 1 Mtr)  Optional roller conveyor D-300 x 3000 mm = EUR 650(10 rollers / 60 diameter / 300 Kg load 1 Mtr.) Capacity 90°: 235° Cutting flat 90°: 280 x 180mm Capacity L 45°: 185° Capacity R 45°: 115° Cutting speed Vario:40 + 80 Circle blade size: 2710 x 27 x 0,9mm Power: 1,5kW Length: 1930mm Width: 1610mm Iiedpozc Imijfx Aquec Height: 2000mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2020, power: 1.4 kW (1.90 HP), control type: NC control, total height: 2,000 mm, total length: 1,900 mm, total width: 1,800 mm, Band saw PILOUS - ARG 260 Plus Bandsaw mitre cutting left & right Ø 260 MACH-ID 6223 Make: PILOUS Type: ARG 260 Plus Year: 2020 Optional roller conveyor D-300 x 2000 mm = EUR 550(6 rollers / 60 diameter / 300 Kg load 1 Mtr) Optional roller conveyor D-300 x 3000 mm = EUR 650(10 rollers / 60 diameter / 300 Kg load 1 Mtr.) Capacity 90°: 260° Cutting flat 90°: 300 x 200mm Capacity L 45°: 175° Capacity R 45°: 200° Cutting speed Vario:35 + 70 Circle blade size: 2880 x 27 x 0,9mm Power: 1,4kW Iiedozc Il Eopfx Aqusc Length: 1900mm Width: 1800mm Height: 2000mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2006, Specifications Brand: MEP Model: Shark 282 SXI EVO Type: Semi-automatic bandsaw Year of manufacture: 2006 Country of origin: Italy Connection voltage: 400 Volt Motor power: 1.5 / 1.8 kW Cutting capacity, round, at 0°: Ø 250 mm Cutting capacity, rectangular, at 0°: 280 x 220 mm Mitre angle range: 45° to the right, 60° to the left Bandsaw speeds: 36 / 72 m/min Bandsaw blade dimensions: 2950 x 27 x 0.9 mm Material clamping: Hydraulic Cooling system: Yes Misting system: Yes Roller conveyor: Yes Dimensions Length: 1970 mm Width: 1150 mm Height: 2000 mm Weight: Approx. 500 kg Iisdpfxjzd Txxe Aquec Roller conveyor, left & right: approx. 4 meters

Condition: used, Year of construction: 2014, machine/vehicle number: 42, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, total height: 2,550 mm, total length: 5,500 mm, total width: 2,200 mm, overall weight: 2,600 kg, saw band length: 5,900 mm, saw band width: 13 mm, We offer a used, fully operational CNC 020 industrial bandsaw with automatic feeder, designed for high-precision cutting of wood or composite materials. The machine features CNC control and automatic feed in X, Y, and C axes, allowing fast, accurate, and repeatable cuts up to 2000 mm in length. Technical data: CNC Cutting Length: 0 – 2000 mm Cutting Height: 0 – 160 mm Cutting Angle: +90° / -90° Iedpoxm S E Aofx Aquoic Cutting Depth: 100 mm Saw band: 5900 x 13 mm Flywheel Diameter: 900 mm Flywheel Upper Adjustment Range: 0 – 80 mm Flywheel Speed: 750 rpm Saw Speed: 2000 m/min Flywheel Motor self-braking 15 HP Forward Movement Speed X-axis: 0 – 70 m/min Return Speed X-axis: 70 m/min Forward Movement Speed Y-axis: 0 – 20 m/min Return Speed Y-axis: 20 m/min Pneumatic Pressure: 6 BAR X-axis Motor Torque: 12 Nm Y-axis / Y2-axis Motor Torque 4.3 Nm B-axis / C-axis Motor Torque 1.1 Nm Z-axis Motor Torque: 4.3 Nm Overall Dimensions 5000 x 2200 x 2550 mm Weight CNC 020 2600 kg Additional Information: We have 4 identical machines available, all from similar years of manufacture, in good condition. Ideal for production lines requiring multiple synchronized units or for spare parts standardization.

Condition: used, Year of construction: 1994, Semi-automatic horizontal bandsaw for solid material and profiles Cutting capacity up to approx. Ø 260 mm Iiedpfx Aqswbfhceuec Robust cast construction Manual feed and hydraulic cutting cycle Swivel head for angular cuts Integrated coolant system Ideal for workshops and industrial use

Condition: good (used), Year of construction: 2007, 1 used band saw manufactured by Bauer type SA 320 year 2007 Technical data: Type Electrical connection 3 x 400 V / 50 Hz Motor power 3000 W Speed levels 2 Saw blade speeds 30- 120 m/min Saw blade dimensions 4150 x 34 x 1.1 mm Iisdettbf Repfx Aquec Table height material feed 800 mm Cutting capacities Cutting capacity 0° round profile 320 mm Cutting capacity 0° round full 320 mm Cutting capacity 0° square material horizontal 320 x 320 mm Cutting capacity 0° square material upright Coolant pump

Condition: used, functionality: fully functional, power: 5.5 kW (7.48 HP), cutting width (max.): 410 mm, control type: CNC control, 1 used band saw automatic machine Manufacturer: Berg & Schmid Model: X Tech 410 Technical specifications: - Cutting range: round 410 mm or flat 410 x 410 mm - Modern 2-axis CNC control - Band run monitoring with automatic feed adjustment - Automatic cut-in for the first cut, minimum remnant length 15 mm - Infinitely variable, frequency-controlled saw drive Iisdpfoytvqqex Aquec - Clamping pressure regulation for thin-walled tubes and profiles - Hydraulically driven chip conveyor - Automatic double-sided saw band lift-off device - Hydraulic saw band tensioning - Material feed via precision ball screw and linear guide Drive power: 5.5 kW Working height: 730 mm Paint finish: platinum grey RAL 7036 and turquoise RAL 5018

Condition: good (used), Year of construction: 1997, 1 used vertical band saw Manufacturer: Jaespa Type: MSP 4 Iiodszb Izkopfx Aqusc Year of manufacture: 1997 Roller diameter: 420 mm Cutting height: 280 mm Cutting width (overhang): 405 mm Cutting speed: 25-280 m/min Table size: 600 x 600 mm Tiltable: 15° / 45° Material support height: 955 mm Band length min/max: 3200/3400 mm Dimensions and weights Length: 1250 mm Width: 1000 mm Height: 2030 mm Net weight: 470 kg

Condition: good (used), Year of construction: 2002, functionality: unexamined, 1 used mitre band saw Manufacturer: Kasto Model: SBL 400 G Year of manufacture: 2002 Technical data: Length: 2491 mm Width: 1240 mm Height: 1369 mm (bow down), 2109 mm (bow up) Minimum cutting length: 6 mm Shortest remnant length: 35 mm Total weight approx.: 920 kg Total drive power approx.: 3.5 kW Mitre adjustment: 0-60° Cutting speed: 32/64 m/min Cutting feed: hydraulically controlled, discharge regulated Material clamping: manual Saw band dimensions: 5090 x 34 x 1.1 mm Saw band guide: carbide, replaceable Saw band tension: mechanical via tensioning cross Iisdpfx Aqowuqbbeuoc Saw band cleaning: via easily replaceable wire brush, driven proportionally to the main drive Coolant: supply through a coolant nozzle, tank volume approx. 50 l, pump capacity approx. 16 l/min Cutting ranges in mm approx.: Mitre angle 0° (90°) / 45° / 60° Round: 400 / 320 / 240 Square: 320 x 320 / 320 x 320 / 220 x 220 Flat (W x H): 400 x 320 / 210 x 320

Condition: used, Year of construction: 2004, cutting range 260 x 260 mm cutting speed 20 - 110 m/min weight approx. 1.700 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if specifically stated in the additional information. Ijdpfx Ajzczhtjqusic Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, total height: 2,080 mm, total length: 1,150 mm, total width: 630 mm, Colour: Green Weight: 400 kg - Documentation available: No - CE certificate present: No - Serial number: 754 - Saw direction: vertical - Main motor power [kW]: 2.2 - Wheel diameter [mm]: 600 - Max. opening saw to stop [mm]: 460 - Max. saw width to column [mm]: 580 - Max. cutting height [mm]: 300 - Table length [mm]: 810 - Table width [mm]: 585 - Min. saw band width [mm]: 20 Isdpfozcvtkex Aqujic - Max. saw band width [mm]: 35 - Min. saw band length [mm]: 4440 - Max. saw band length [mm]: 4580 - Suction nozzle diameter [mm]: 130 - Voltage [V]: 380 - Current consumption [A]: 5.2 - Power [kW]: 2.2 - Transport dimensions: 1150mm x 635mm x 2080mm (l x w x h) - Transport weight [kg]: 400kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2004, functionality: fully functional, cutting height (max.): 450 mm, cutting width (max.): 450 mm, roller diameter: 450 mm, actuation type: electric, total height: 1,445 mm, total length: 1,400 mm, total width: 2,600 mm, overall weight: 1,200 kg, Głowno PTS 450 band saw Machine specifications: - Year of manufacture: 2004 - Maximum cutting dimensions: - Cutting at a 90° angle: Ø450 mm or 450x600 mm - Cutting at a 45° angle: Ø450 mm or 200x450 mm - Height of the work surface: 760 mm - Diameter of the cutting blade wheel: Ø530 mm - Cutting blade dimensions: 41 x 1.27 x 6250 mm - Cutting speed: - Two-speed gearbox: 45 ÷ 90 - Variable-speed gearbox: 15 ÷ 90 - Motor power: - Hydraulic pump: 1.1 kW - Cutting blade drive, variable-speed gearbox: 4 kW - Coolant electro-pump: 0.09 kW - Hydraulic pump flow rate: 6 l/min - Coolant electro-pump flow rate: 12 l/min - Hydraulic power unit capacity: 50 l Iisdpszd El Refx Aqujc - Coolant tank capacity: 40 l - Maximum load capacity of the band saw: 15 kN - Weight of the band saw: 1200 kg - Dimensions (width x length x height): 2600 x 1400 x 1445 mm

Condition: used, Year of construction: 2008, functionality: fully functional, cutting height (max.): 400 mm, cutting width (max.): 400 mm, control type: manual, roller diameter: 400 mm, pivoting range: 60 °, actuation type: electric, total height: 2,150 mm, total length: 2,710 mm, total width: 1,200 mm, overall weight: 2,300 kg, Equipment: rotational speed infinitely variable, Kaltenbach KBS 400 DG bandsaw Iedpfezd Egujx Aqujic Machine data: - Year of manufacture: 2008 - Saw: - Weight: 2300 kg - Dimensions (L x W x H): 2710 x 1200 x 2150 mm - Working height: 720 mm - Saw blade: - Dimensions: 5730 x 34 x 1.1 mm - Cutting speed: 15 – 90 m/min - Saw blade types: Bi – Metal M2 / M42 / M51 - Feed - Smooth, maximum working feed: 400 mm/min - Rapid forward / reverse: 2500 mm/min - Working range Maximum material dimensions (W x H) - at 0°: 400 x 350 mm - at 30° left / right: 355 x 350 mm - at 45° left / right: 280 x 350 mm - at 60° left: 185 x 350 mm Minimum section length: 10 mm - Electrical data - Main motor: 3 kW - Hydraulic motor: 1.5 kW - Chip brush: 0.12 kW - Air consumption: for economical lubrication at 6 bar, 60 l/min

Condition: used, Year of construction: 2006, functionality: fully functional, type of input current: three-phase, roller diameter: 600 mm, actuation type: electric, total height: 2,900 mm, total length: 2,900 mm, total width: 4,600 mm, overall weight: 4,600 kg, Głowno PTS 600 two-column band saw Machine specifications: - Year of manufacture: 2006 - Maximum cutting dimension: Ø 600 mm - Minimum width of material for cutting: 150 mm - Height of the working surface: 860 mm - Diameter of the saw blade wheel: 900 mm - Saw blade dimensions: 54 x 1.6 x 9000 mm - Cutting speed: 20 ÷ 90 m/min - Weight of the band saw with feeder: 4600 kg - Dimensions (width x length x height): 4600 x 2900 x 2900 mm - Installed power: 25 kVA Iiodpfxszd Ebxj Aqujc

Condition: new, Year of construction: 2026, CORMAK BS370H Semi-Automatic Metal Band Saw The CORMAK BS370H is a robust semi-automatic band saw designed for precise cutting of tubes, profiles, and solid materials. The latest version is equipped with an upper clamping system for bundle cutting and variable blade speed control via an inverter, adjustable from 20 to 90 m/min. These enhancements increase the machine’s versatility and make it easier to adapt cutting parameters to different types of materials. The upper clamp stabilizes stacked workpieces and minimizes movement during cutting. This allows for more efficient cutting of bundles of profiles, tubes, and other repetitive components. Key Advantages Upper material clamp – stable and efficient bundle cutting. Variable blade speed (20–90 m/min) – speed adjustment via frequency inverter. Semi-automatic operation – hydraulic material clamping, saw head lowering, and automatic return. Mitre cutting from -45° to +60° – wide range of cutting applications. Hydraulically operated vise – fast and repeatable workpiece clamping. Infinitely adjustable downfeed rate – greater control over the cutting process. Blade guides with carbide inserts and bearings – precise blade tracking and improved cutting accuracy. Closed-loop coolant system – cools the cutting zone and dissipates heat effectively. Blade tension indicator – convenient monitoring of correct blade tension. Automatic shut-off in the event of blade breakage – enhanced machine protection and safety. Efficient Bundle Cutting The integrated upper clamp allows multiple workpieces to be securely held in place when stacked on top of each other. This is particularly beneficial for serial cutting of profiles, tubes, and other materials with repetitive dimensions. The material is secured both by the hydraulic vise and the upper clamp, reducing movement and lifting of individual pieces within the bundle as the blade passes through the material. Variable Blade Speed Control The blade speed can be continuously adjusted between 20 and 90 m/min. The inverter enables precise adaptation of cutting parameters according to the material type, cross-section, and specific cutting requirements. Semi-Automatic Operating Cycle Once the material is positioned and the cutting cycle is started, the machine automatically performs the following operations: The hydraulic vise clamps the workpiece. The saw head lowers at the preset feed rate. The blade performs the cut. A limit switch detects completion of the cutting cycle. The saw head is hydraulically raised back to its starting position. The swiveling saw head enables cutting angles ranging from -45° to +60°. The material remains stationary while the operator adjusts the required cutting angle by rotating the saw head. Cutting Capacity at 90° Material Type Capacity Round Ø270 mm Square 220 × 220 mm Rectangular 370 × 220 mm Technical Specifications Iodpfx Aqoycqhcsujic Parameter Value Model CORMAK BS370H Operation Mode Semi-automatic Mitre Cutting Range -45° to +60° Blade Speed Variable, 20–90 m/min Blade Speed Control Frequency inverter Upper Material Clamp Yes – for bundle cutting Blade Size 3160 × 27 × 0.9 mm Blade Tensioning Manual mechanical tensioning Saw Head Feed Control Infinitely variable hydraulic cylinder Vise Operation Hydraulic Vise Base Height 890 mm Power Supply 400 V / 3 Phase Total Power 1.5 kW Coolant Pump Power 46 W Machine Dimensions (with base) 1850 × 950 × 1500 mm Weight 491 kg

Condition: used, Technical specifications: Max. cutting height: 200 mm Max. cutting width: 250 mm Wheel diameter: 350 mm Max. belt width: 25 mm Min. belt width: 5 mm Dimensions of the work table: 410x520 mm Diameter of the dust extraction port: 60 mm Iiedpfozd A Dqjx Aquoc Safety switch Motor power: 1.5 kW Voltage: 400 V Overall dimensions: Length: 700 mm Width: 800 mm Height: 1600 mm

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, minimum blade thickness: 2 mm magnetic position sensor for the guide adjustable spacing of the feed rollers Ijdpszdy N Dsfx Aquoic material detection sensor belt cooling/lubrication system wheel diameter: 800 mm motor power: 15 kW smooth feed speed adjustment pneumatic pressure on the feed rollers control panel with a color touchscreen display screw-type belt centering pneumohydraulic belt tensioning year of manufacture: 2017 total weight: 1300 kg power supply: 380V

Condition: new, Thomas Super Trad 301 So Easy – Semi-automatic metal bandsaw Promotional price: €9,400 instead of €11,100, excluding VAT. Capacity, round: 255 mm - The SO EASY saw enables a complete cutting cycle without constant operator presence thanks to the hydraulic control system for lowering the saw frame. - Hydraulic vice - Limit switch to adjust the saw frame return position directly above the material to be cut - Selector switch to switch to MANUAL cutting mode with a button for quick access to the material to be cut - Central control panel on the front of the machine with a bright alarm system - Automation is controlled via a safety relay - Highly efficient hydraulic pump and low energy consumption - Practical and reliable for all cutting requirements of medium-sized ferrous materials - Large, round "plateau" work table that rotates with the blade during miter cuts, guaranteeing excellent support for the material to be cut. This system prevents the saw blade from cutting the work table, as is the case with conventional bandsaws. - Solid cast iron vice with handwheel and quick-release lever - The vice is equipped with a practical handle for quick movements and is mounted on a rail to allow for lateral movement. - Cuts from 0° to 60° to the right and 45° to the left are possible - Saw blade rotation with 2 electric speeds - Saw blade tension adjustment via handwheel and safety microswitch in case of blade breakage or insufficient blade tension - Coolant electric pump - Saw blade cleaning brush FEATURES - Saw frame, vice and plateau made of cast iron - Precision saw blade guide with carbide pads and adjustable rollers - Gears immersed in oil STANDARD EQUIPMENT - Adjustable stop with millimeter scale - Hydraulic vice - Material support bracket - Bimetal M42 saw blade 2750 x 27 x 0.9 mm Isdezcpkpopfx Aqujic - Set of service keys - CE certification and operating and maintenance manual OPTIONAL - Roller conveyor loading side (2 m) - Roller conveyor unloading side with stop (2 m) - Blada minimal lubrication system - Start pedal Technical data - Capacity, round 0°: 255 mm - Capacity, round < 45°: 160 mm - Capacity, round 45° >: 200 mm - Capacity, round 60° >: 110 mm - Capacity, square 0°: 250 mm - Capacity, square < 45°: 160 mm - Capacity, square 45° >: 190 mm - Capacity, square 60° >: 110 mm - Capacity, rectangular 0°: 300 x 220 mm - Capacity, rectangular < 45°: 190 x 100 - 150 x 170 mm - Capacity, rectangular 45° >: 190 x 170 mm - Capacity, rectangular 60° >: 110 x 130 mm - Saw blade dimensions: 2750 x 27 x 0.9 mm - Saw blade speed: 33/66 m/min - Vice clamping width: 305 mm - Saw frame inclination: 30° - Working height: 940 mm - Gear reduction ratio: 40/1 - Flywheel diameter: 300 mm - 3-phase electric motor: 1.0 - 1.4 kW - Electric pump: 0.11 kW - Machine dimensions WxHxD: 800 x 1600 x 1800 mm - Machine weight: 440 kg

Condition: excellent (used), Year of construction: 2004, Dear customers, we currently offer you a very well-maintained used band saw from the brand HEMA. Here are the machine's technical specifications: Model: UH900 Year of manufacture: 2004 Configuration: right Cutting width: 865 mm Maximum cutting height: 700 mm Wheel diameter: 900 mm Saw blade length: 6,550 mm Power: 5.5 kW Cutting speed: 1,800 m/min with tilting table via precision rack Dimensions: approx. 1630 x 1080 x 2,825 mm Weight: approx. 950 kg Iodpfx Aezcn H Aoqujic If you have any questions, please feel free to contact us.

Condition: used, Year of construction: 2015, machine/vehicle number: 300-B-347, functionality: fully functional, operating hours: 300 h, input voltage: 400 V, input current: 16 A, input frequency: 55 Hz, type of input current: three-phase, cutting height (max.): 300 mm, cutting width (max.): 430 mm, control type: manual, pivoting range: 60 °, actuation type: electric, rotational speed (max.): 2,460 rpm, total height: 1,300 mm, total length: 1,950 mm, total width: 1,400 mm, table height: 650 mm, year of last overhaul: 2024, Equipment: CE marking, documentation/manual, Sawing machine. Fully functional with very few hours of use. Option to view and test it in person or via video call. Ijdpfx Aqozdugkeuoic

Condition: new, Used MACC SPECIAL 411 CSO Gravity descent bandsaw New CE The basic characteristics of the machine (rigidity of the blade support, flywheel sizing, band guides, band tensioning) have been carefully studied to avoid the yielding of the band, increase its duration, improve linearity and cutting time. - Sawing machine with cut by falling arc regulated by a hydraulic circuit, manual bar feeding and vice closing, manual head return. - Vertical rotation on pivot with adjustable conical bearings without backlash - Band control with two-speed motor and special reducer with bronze gear and hardened and ground worm screw Iiodpfx Aeficb Toquoc - Appropriately sized flywheels - Sturdy belt guides made of watertight bearings and adjustable widia plates - Tensioning of the band obtained by means of an electromechanical device with blade rotation microswitch control - Vice with rapid approach device - Accident prevention safety device on the flywheel cover, on the control knob and on the blade - Hydraulic cylinder for controlled descent - Cutting thickness 1,2 mm - Cutting range 45° left 60° right - Adjustable stop for cuts of the same size - 24 V low voltage system - 0.06 kW electric pump for belt cooling - Pedestal with drawer for chips collection and extractable tank for the cooling liquid - Machine predisposed

Condition: new, CNC automatic hydraulic sawing machine for cuts from 0° to 60° right, complying with all CE safety standards. The equipment has 9 programs, each of which consists of 99 steps, for a total of about 890 cutting positions with relative piece counter. Functioning: Material feed. Fixed vice closing. Blade rotation and dispensing of emulsifiable liquid. Arc descent until cutting is complete and return of the feeder carriage until the set size is reached. Arc return and stop blade rotation and coolant delivery. Fixed vice opening. Cycle repetition. Step by step advancement through ball screw. Numerical control of cutting quantity and length. Hydraulic unit with cutting pressure adjustment Blade tensioning obtained by manual rotation of the handwheel and guaranteed by electromechanical device. Ijdpog Np Dxofx Aquoic Brush cleaning device. Bimetallic belt 3010 x 27 x 0,9 mm. Hydraulic power pack motor 0.75 kW. Cutting thickness 1,2 mm. Material feeding stroke 600 mm. Electric pump 0.09 kW.

Condition: new, NEBES TM 275 Band Saw Machine - 400 v Three-phase NEW "CE" INDUCTION motor Cast iron structure Adjustable cutting angle from 0° to 60° All cast iron structure Electric pump for blade lubrication and cooling Oil-bath blade tensioning gauge Front controls and two cutting speeds Iedpfxoh Nm Ncj Aqusic Deviator for exclusion of coolant pump Blade guide with carbide skids (H.M.) Round cut 0° 220 mm Square cut 0° 200 x 200 mm Flat Cut 0° 230 x 185 mm Round cut 45° 150 mm Square cut 45° 150x150 mm Flat Cut 45° 150x200 mm Round Cut 60° 90 mm Square Cut 60° 90x90 mm Flat Cut 60° 90x120 mm HP 1.3 Voltage 400 V Blade size 2450 x 27 x 0.90 mm Weight 265 kg

Condition: new, NEW No.1 available for immediate delivery CE Warranty The MACC SPECIAL 335 MS is a semi-automatic band saw for the cutting of solid bars and profiles of small dimensions, with high efficiency and excellent precision. The robust structure gives the machine the necessary rigidity and precision to the cutting group. The belt drive is equipped with a two-speed motor and a special reducer complete with bronze gear with hardened and ground worm screw. The flywheels are suitably sized and the belt guides are sturdy and made with watertight bearings and adjustable carbide plates. By means of the electromechanical microswitch control it is possible to tension the band with the rotation of the blade. Equipped with an accident-prevention safety device on the flywheel cover and on the blade, the machine is completed by a rotating table for resting the material and a vice with a rapid approach device. Operation. The machine: 1. closes the vice and activates the band motor 2. makes the arc descend for cutting 3. the arc returns to the starting position 4. stops the band motor 5. opens the vice Manual cutting possibility Cutting speed (m/min) 38-77 Cutting thickness (mm) 1,2 Cutting range From 45 sx 60 dx Stop for cuts of the same size Adjustable Electric pump for cooling the band 0,06 kW Cutting capacity at 0°. Isdpfeg S Ui Aex Aquoic

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, OPPORTUNITY – IMMEDIATELY AVAILABLE HYDRAULIC HIGH PERFORMANCE BAND SAWING LINE MANUFACTURER: BEHRINGER MODEL: HBM 440 A PC-E YEAR OF MANUFACTURE: 2015 Sawing capacity round: 440 mm Sawing capacity flat (W x H): 440 x 440 mm Minimum round / flat: 30 mm / 20 x 20 mm Saw blade dimension: 6700 x 54 x 1.1 mm Drive power: 11 kW Cutting speed: 20 – 200 m/min Material feed per stroke: 600 mm Material feed, multiple: max. 5400 mm Machine weight: 8,200 kg Dimensions (L x W x H): 6500 x 5000 x 2700 mm Transport height: 2400 mm Specifications subject to change – errors excepted Equipment: - Coolant system 200 l - Full enclosure of the saw - Material infeed support, 1650 mm length - Chip conveyor - BEHRINGER CNC dialogue computer IP 65, BEHRINGER dialogue control IP 65 - Automatic bar change - Sorting unit in portal design: - Usable stroke of gripper: 4660 mm - Depth of storage: 2000 mm - Max. cut-off length: 4000 mm - Max. single workpiece weight: 1500 kg - Infeed magazine KM 45 F-VR / 600-6,200: - Round material: 50 – 440 mm - Flat material: 40 x 20 – 400 x 400 mm or 440 x 430 mm - Bar length: 600 – 6200 mm - Powered roller conveyor: 6100 mm - Usable material storage: 3000 mm Iiedpoxwqm Hofx Aqusc - Safety fence PRIOR SALE AND AVAILABILITY RESERVED