Used Windows Production for sale (23,198)

Condition: used, Year of construction: 2016, functionality: fully functional, Braukon 50hl brewhouse containing a Mash Ton, Lauter Ton and Wort Kettle in the main skid. Skid also contains Whirlpool and Chilled Liquor Tank also. Worth Kettle contains a vapour condenser (heat exchanger) that recovers heat from venting steam to prep the water for the next brew etc. (Returns 15HL hot liquor at 86°C per brew at 4% evaporation) Condenser is only 18-24 months old. Brewhouse is almost completely automated with the exception of hops and salts dosing (that need to be added through the hatches in the brewing vessels), and the cleaning of the Whirlpool (manipulation of hand valves, turning water supply / pump on/off on the control screen). Brewhouse was commissioned in 2015 Braukon have traveled to service it every year since we've had it, so would expect it to be in much better condition than other similarly aged brewhouses operated by small businesses. Brewhouse was completely CIP'd after every use. CIP System available also. Brewhouse is easily capable of doing 18 brews a week on 18/5, but was never worked even close to that potential. -Mash Kettle "Alloysius" Mash Hydrator Steam jackets and mash mixer (agi.) for temperature stepped mashing -Lauter Tun Maximum charge around 1100Kg malt Discharge via positive displacement "Seepex" pump -Wort Kettle 55hl maximum capacity Rodpfxeymyckj Ahvsp Vapour Condenser – recovers heat from boiling as hot water returned to Hot Water Tank -Whirlpool Brew length is 50hl i.e. you get about 5000L of wort (beer before it's been fermented) out of each brew. Will complete a brew every 4 hours Estimated 3000 to 3400 brews in it's total lifetime.

Condition: not inspected (used), Year of construction: 2018, functionality: unexamined, conveyor belt width: 50 mm, total length: 20,000 mm, total width: 5,000 mm, total height: 2,400 mm, controller model: SIEMENS SIMATIK, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection between 08/04/2026 and 16/04/2026! TECHNICAL DETAILS The line consists of the following components: Pressing units Riveting units Screwdriving units Various axles & motors Pneumatic accessories Conveyor belt (belt width: 50 mm) Vibratory feeders Grippers MACHINE DETAILS Control: SIEMENS SIMATIK Dimensions & Weight Rjdpfx Aheyk Uv Tevsp Dimensions (L x W x H): 20,000 x 5,000 x 2,400 mm Weight: 5,000 kg Note: The line can be transported on standard trucks.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, overall weight: 4,000 kg, power: 17 kW (23.11 HP), total width: 1,510 mm, total length: 6,500 mm, total height: 1,820 mm, Automatic paper roll paper lid machine with inline packing machine for 8oz and 12oz cups Speed - 70~100 pc/minute Rsdpfoxur Hiox Ahvep Raw material - One-side or two side (polyethylene)film coated/laminated paper (Like the PE coated paper; PLA paper; card boad paper with film) Paper Lid Size - for 8oz and 12oz Working Power - 12kw Total Power - 17KW, Power Source - 3-phase, 380V, 50/60Hz, User Need To Buy Air Compressor

Condition: like new (used), Year of construction: 2019, operating hours: 200 h, functionality: fully functional, machine/vehicle number: N/A, Equipment: head guard, A robust capper for applying roll-on-pilfer-proof (ROPP) caps to bottles Rodpex E S Nujfx Ahvop Capacity: 400-600 bottles per hour, depending on operator Benchtop operation 4 roller stainless steel capping head Heads can be changed on the machine to allow the application of different sizes of cap with the same machine Stainless steel frame and case Dual push-button safe operation

Year of construction: 2025, condition: excellent (used), 2025 Versafire EP 135 High End Professional Print Production Line Including: Versafire EP 135 A4/min Or 4,500 A3 Sheets/Hour (Simplex) Engine Unit, Media Identification Unit, Fuser Unit, Automatic Colour Diagnosis & Image Quality Monitor Unit, EFI Fiery Colour Controller E-86, EFI Impose (Streamlines & Automates The Imposition Process) & Fiery ES-3000 Spectrophotometer. Versafire Engine S/No. 5022F130003 (2025). LCIT RT5120 A3 Vacuum Feeder (A3 Large Capacity Tray With Vacuum Feeder, 2 Trays, Capacity Up To 4,400 Sheets (80 g/m2)). BY5020 Multi Bypass Unit (Additional Feeder (No Vacuum Support) For Up To 500 Sheets, Maximum 216 g/m2 Uncoated; e.g. For Banner, Special Stock, Envelopes, Overhead Transparencies, Labels, Letterhead & Postcards). LCIT Vacuum Feed Banner Sheet Tray (Vacuum Supported Banner Pile Feeder Option, Max. Capacity 730 Sheets (Top Tray Front Loading Will Be Disabled), Media Format 489-700mm Up To 300 g/m2). LCIT RT5120 Multi Bypass Attachment Kit For Vacuum Feeder (Must Be Installed When Attaching Multi Bypass Unit To Vacuum Feeder). Multi Bypass Banner Sheet Tray (Mechanical Support For Long Sheets (Banner). Roll-Away Cart Type 5010/5040 (Additional Roll-Away Cart For The High Capacity Stacker). SK5040 High Capacity Stacker (Receives & Holds Up To 5,000 Sheets, One Roll-Away Cart 5010 Comes Standard For Easy Removing Of Large Stacks Of Printed Material). Output Tray For Banner Sheet Type (Mechanical Support For Long Sheets (Banner). SR511 0 Standard Finisher (Up To 3,000 Sheets Capacity (80 gsm), Stapling Up To 100 Sheet With Automatic Shortening Of Staples). NOTE: A loading fee will be added to buyer's invoice of £200 + VAT. Rodpfx Aheyml Sdsvep Description With TCRU/ORU (Sets A & B) Spare Parts To Increase Uptime; Includes Charging Unit, Drum Cleaning Unit, Image Transfer Belt Cleaning & Lubrication Unit, Infeed-, Transfer & Paper-Separation-Rollers, (4) Photoconductor Drum, Fuser Belt Smoothing Roller Unit, Dust Filter, Fuser Cleaning Unit, Fusing Unit And Fusing Refresh Roller Unit, Versafire EP Toner (Black), Versafire EP Toner (Yellow), Versafire EP Toner (Magenta), Versafire EP Toner (Cyan), (3) Waste Toner Bottles, Empty Toner Bottle Collection Box, Matt Fuser Assembly Unit, Dell Optical USB Mouse, Dell Qwerty USB Keyboard, Cables, Versafire EP Branding Kit & Operating Instruction Manuals. Please note: Printer is now in storage and not under power. NOTE: A loading fee will be added to buyer's invoice of £200 + VAT.

Condition: new, max. workpiece length 5150 mm profile spindle 1 Stück main drive 16 kW Control Beckhoff CNC Number of axles 5 St. CNC machining center Masterwood Project 385 WL, NEUMASCHINE The all-rounder for Windows, round arches and doors interior Post and beam 5-axis machining of all kinds Detailed description in the adjacent PDF file! HIGHLIGHTS: - Working range: X = 5150 mm; Y = 1500 mm; Z = 200 mm - 1 pc. 5-axis high-performance spindle, 16 kW, double bearing with HSK 63 F recording - fixed drill head with 19 spindles with 7 individually retrievable vertical spindles X-direction with 6 individually retrievable vertical spindles Y-direction with 2 double horizontal spindles X-direction and 1 double horizontal boring spindle in the Y direction Saw unit integrated in drill head - Carousel tool changer with 22 places and 102 mm grid spacing - Carousel tool changer with 16 places and 102 mm grid spacing - linear 4-fold tool magazine - Special clamps for straight window and door parts - special clamps for round window and door elements - 24 pcs. Vacuum clamps for internal installation - Vacuum pump - Chip conveyor belt - extensive design software for interior design, panel processing as well as f. Windows and doors: Masterwork: 2D-Wop for standard application panel processing / interior fitting with Additional function Lamello connection Master 3D Level 2: for more complex edits, optionally also expandable for 5-axis fully interpolating MasterWindow: Integrated window and door design software i.e. Machine does not have to (but of course) with external industry software be controlled. VIDEO shows production of 4 sash parts in one clamping Complete machining including glazing bead production. Corner joint hybrid. Of course, all common corner joints on the machine producible. OTHER OPTIONS ON REQUEST! We are also happy to offer you suitable tools for the machine. Rjdpfxjd Ih Hts Ahvop (ording to the manufacturer - without guarantee!)

Condition: new, max. workpiece length 3200,5100 mm profile spindle 1 Stück main drive 12 kW Control Beckhoff CNC Number of axles 5 St. Masterwood Project 385 CNC-Bearbeitungszentrum ----- 5-Achs CNC-Bearbeitungszentrum in Portalbauweise zum Einsatz für Rundbogenfenster, Türen, Pfosten-Riegel, Innenausbau, Treppen Kurze Zusammenfassung: ----- Arbeitsbereich: X = 3200 mm (Optional 5100 mm) ; Y = 1500 mm; Z = 200 mm 1 Stk. 5-Achs-Hochleistungsspindel, 12 kW, mit HSK 63 F Aufnahme 1 Stk. fest installierter Bohrkopf mit 19 Spindeln mit 7 einzeln abrufbaren Vertikalbohrspindeln X-Richtung mit 6 einzeln abrufbaren Vertikalbohrspindeln Y-Richtung mit 2 doppelten Horizontalbohrspindeln X-Richtung und 1 doppelte Horizontalbohrspindel in Y-Richtung Sägeaggregat in Bohrkopf integriert 27 Werkzeugwechselplätze: Karussellwerkzeugwechsler mit 22 Plätzen und 102 mm Rasterabstand lineares 5-fach Werkzeugmagazin für große WKZ-Durchmesser Konsolentisch mit 6 Traversen Werkstückanhebevorrichtung 6 Stk. spezielle Spanner für runde Fenster- und Türenelemente 24 Stk. Vakuummspanner für Platten und Innenausbau 1 Stk. Vakuumpumpe 100m3/h 1 Stk. Spänetransportband 1 Stk. Fernbedienung Konstruktions-Software Masterwork: 2D-Wop für Standardanwendung Plattenbearbeitung/Innenausbau, Rundbogen, Türen Master 3D Stufe 2: für komplexere Bearbeitungen, optional auch erweiterbar für 5-Achs voll interpolierend Fracht und Montage innerhalb Deutschland Technik und Dienstleistungen gemäß beiliegender ausführliche Beschreibung ----- Gesamtpreis in dieser Ausführung: auf Anfrage! ----- Optionen mit Mehrpreisen: ----- Arbeitslänge 5.100 mm anstelle 3.200 mm inklusive Erhöhung Konsolenanzahl und Spannmittel Mehrpreis: 7.500,00 Euro zzgl. MwSt. Zusätzlicher Karussellwerkzeugwechsler mit 16 Plätzen und 102 mm Rasterabstand Mehrpreis: 6.500,00 Euro zzgl. MwSt. Ausführliche Beschreibung siehe PDF anbei. Mehr Optionen auf Anfrage! (technische Angaben laut Hersteller- ohne Gewähr!) Rsdpfod N Rt Tsx Ahvep

Condition: used, Year of construction: 2005, functionality: fully functional, length stop: 3,200 mm, tool diameter: 400 mm, spindle diameter: 50 mm, spindle stroke: 640 mm, spindle speed (max.): 3,000 rpm, milling spindle length: 320 mm, saw blade diameter: 400 mm, height adjustment type: electric, type of input current: AC, working height: 130 mm, working width: 200 mm, SCM Windor 60/100 – Angle Processing Center Manufacturer: SCM Group Year of manufacture: 2005* 1. General Description of the System The system in question is a window and door production line of the type Windor 60/100 from the manufacturer SCM Group, built in 2005. It is a CNC-controlled angle processing center designed for the industrial machining of frame and sash components. The system is configured for series production and enables precise, repeatable machining in integrated process steps. 2. Main Components of the System 2.1 SCM Windor 60/100 Angle Processing Center The SCM Windor 60/100 features a modular design and is configured as an angle processing unit. Machining takes place on a tenoning side and a profiling side positioned at right angles to each other. The system combines several machining steps – such as milling, drilling, grooving, rebating, and tenoning – in a fully integrated, CNC-controlled process. Key Features: * CNC multi-sided machining * Multiple milling and processing spindles * Automated tool handling and changeover * High dimensional accuracy and repeatability 2.2 Fleximat Drilling Center The Fleximat drilling center is integrated into the system and is used for the precise execution of boreholes for joints and fittings. Machining is CNC-controlled with both vertical and horizontal drilling units. 2.3 Profiler Center The profiler center is designed for contour-forming milling operations and consists of two processing sides: Right side: * Lifting spindle with height adjustment * Suitable for variable profile and contour processing Left side: * 24-position tool changer * Automatic tool changing to minimize setup times Rsdpfjx Nqqxsx Ahvjp * Suitable for complex profile milling 2.4 Löwer Surface Sanding Machine A surface sanding machine from Löwer is integrated into the production line. The machine is used exclusively for surface sanding, serving to improve the surface quality of the processed workpieces. 3. Control, Operation, and Safety The system is equipped with a CNC control unit that manages all machining operations, tool changes, as well as feed and spindle movements. Operation is semi- or fully-automated by trained personnel. The safety features are state-of-the-art as of the time of construction (2005) and include, in particular: * Mechanical guards and enclosures * Emergency stop devices * Safety locks on moving machine parts 4. Optional Expansion: SCM Topset XL Planer (10-spindle) For expansion of the existing machinery, provision has been made for a SCM Topset XL planer with 10 spindles. This machine will be operated as a standalone processing station at a separate location within the production hall and is not directly integrated into the CNC control of the Windor system. The system is available and can be dismantled at any time. Dismantling and transportation are to be organized by the buyer. Available from 07.01.2026

Year of construction: 1990, condition: ready for operation (used), A complete nonwoven fabric production line including peripheral equipment and a complete pre-blending line is available. 1) Pre-blending line with carding opener Houget Duesberg Bosson, year of construction: 1972, working width: 1500mm, drum: 1, worker-stripper pairs: 3, doffer: 1, feed rollers: 2, total line dimensions X/Y/Z: approx. 11000mm/1800mm/3100mm, operating hours: approx. 16414h, including feed table and bale opener. 2) Filling chute Spinnbau Bremen, year of construction: 1989, machine dimensions X/Y/Z: approx. 4000mm/2600mm/6250mm. 3) Weighing conveyor with vibrating chute Protec. 4) Card Hergeth, year of construction: 1990, working width: 2500mm, feed rollers: 2, feed roller diameter: 94mm, licker-in roller diameter: 413mm/550mm, worker-stripper roller diameter: 219mm/123mm, transfer roller diameter: 550mm, main cylinder diameter: 1500mm, doffer diameter: 850mm, compaction roller diameter: 260mm, pressure roller diameter: 2500mm. 5) Crosslapper Autefa Topliner CL 4000/4002 - WebMax, year of construction: 2006, min. fineness range: 0.7dtex, fiber types: chemical/natural/regenerated/blends, max. web weight: 100g/m², max. web weight with crosslapper: 5000g/m², max. laying width: 3500mm, working width: 2500mm, max. laying speed: 130m/min, lapper lift: 100mm, machine dimensions X/Y/Z: approx. 3850mm/8800mm/2200mm. 6) Drafting unit, working width: 2500mm, machine dimensions X/Y/Z: approx. 1600mm/3650mm/1650mm. 7) Double needle loom Dilo CBF 31/HVSL 31, year of construction: 2007, max. working width: 3100mm, stroke frequency: 1375/min, needle beam stroke: 60mm, horizontal beam stroke range: 0mm-6mm, number of needles per 1m working width: approx. 15430, machine dimensions X/Y/Z: approx. 3350mm/5150mm/4500mm, weight: approx. 38000kg. 8) Web accumulator Suchy WOB 3200, storage volume: 40m³, web weight range: 50g-2000g/m², max. working speed: 40m/min, max. production speed: 20m/min, working width range: 1000mm/3000mm, roller top width: 3200mm, machine dimensions X/Y/Z: approx. 4300mm/5050mm/5300mm. 9) Slitting unit Suchy, year of construction: 2006, weight: approx. 250kg. 10) Climbing roll winder, winding roller diameter: 350mm, min. winding diameter: 3inch, max. winding diameter: 1500mm. 11) Edge trimmer Hepp-Schwamborn. 12) X-ray measuring device Protagon Q6. This is a complete and automated nonwoven fabric production line starting from fiber bales. Documentation available. An on-site inspection is possible. Expected to be available from the end of March 2026. Rjdpfx Asymfc Aehvep

Year of construction: 2008, condition: used, Lot consists of: (1) Twin-screw extruder Technical details: screw diameter: 75 mm, capacity: max 200 kg/h, KraussMaffei-Berstorff control, weight: 3.5 t /// Drive: SIEMENS 2860 / 30.5 rpm, 5,070 Nm, weight: 1.2 t (1) Calibration table Technical details: table length approx. 6 m (1) Haul-off unit + punching unit + guillotine unit Technical details: Redoyknrzjpfx Ahvsp contact length approx. 2.5 m, unit length approx. 8 m (1) Tipping table Technical details: length approx. 6,000 mm

Year of construction: 2012, condition: used, Lot consists of: (1) Twin-Screw Extruder Technical Details: screw diameter 75 mm, Capacity: max 200 kg/h, KraussMaffei-Berstorff control system, weight 3.5 t /// Drive: SIEMENS 2860 / 30.5 rpm, 5,070 Nm, weight 1.2 t Rjdpoyknp Tsfx Ahvjp (1) Calibration Table Technical Details: with three (3) SPECK pump systems, table length approx. 4 m (1) Haul-Off Unit Technical Details: speed 0.1 - 11 m/min, pulling force 25,000 N, contact length 1,500 mm, profile clearance WxH 300 x 180 mm (1) Tipping Table Technical Details: slide into adjacent profile, single-strand roller shutter, table length approx. 6,000 mm

Condition: excellent (used), Year of construction: 2021, Year of manufacturing: 2021 Number of prints: approx. 6,8 millions Condition: excellent Speed: 120 A4 / min. Max. format: 488 x 330 mm, long format up to 1200 mm (width 330 mm) Equipment: 4-colors (CMYK), 1x high capacity stacker, 2x high capacity input module with 4 drawers General description: Machine is in perfect condition and still producing. Printer was and still is under Xerox service contract. Only original Xerox service, spare parts a consumption materials were used. Test printing and inspection is possible. Redpfx Asrnr Rzshvjp

Condition: repair required (used), Year of construction: 2000, functionality: limited functionality, machine/vehicle number: 200031, pressure: 6 bar, total width: 1,200 mm, total length: 3,500 mm, total height: 2,200 mm, overall weight: 1,500 kg, operating pressure: 6 bar, pressure (max.): 8 bar, empty load weight: 1,350 kg, input voltage: 400 V, number of previous owners: 1, pressure dew point: 3 °C, reception height: 1,000 mm, type of input current: three-phase, construction width: 1,200 mm, Equipment: CE marking, documentation/manual, type plate available, The GALDI RG250 is an automatic filling machine designed for the food industry, specifically for filling pre-formed cartons with milk, cream, juices, and other liquid or semi-liquid products. The machine transports cartons from the magazine to the erecting unit, where they are opened, shaped, and heat-sealed at the bottom. After precise volumetric filling, the carton is closed and transferred for further packaging steps. The RG250 is a well-established industrial model known for its robust stainless-steel construction and hygienic design. This unit is partially functional and suitable for refurbishment, retrofit projects, or as a source of spare parts. Key advantages: - Designed for filling carton containers in dairy and beverage production - Hygienic, stainless-steel construction - Automated carton handling through erector and filling station Rjdpfx Ahox Eiwajvsp - Precise filling volume control - Suitable for milk, cream, juices, and similar liquid products Ideal for: Dairy plants, beverage producers, and food-processing companies looking for a cost-efficient solution to upgrade or rebuild their filling and packaging line.

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 2,450 mm, total height: 1,790 mm, total length: 3,470 mm, Are you looking for a modern, high capacity, reliable deck nailing machine for pallet production to an exceptional price-performance ratio? Then the DNM-153 is the obvious choice. DNM-153 is our brand-new model of deck nailing machine, developed on proven and reliable mechanics. Like our other production machines for the pallet industry, it is characterized by high quality, flexibility, and a user-friendly design optimized for efficient production. The machine is designed for manufacturing decks in sizes from 600 × 400 mm up to 1600 × 1200 mm, where high production speed and fast changeover time is a top priority. The machine is equipped with three nail guns with magazines for large nail coils. Each nailing pattern can include 1–3 nails and can also be clinched if needed. The boards are fed into cassettes with a very large buffer – three cassettes for stringer/under boards and one cassette for deck/upper boards. The machine is controlled and programmed via a modern, user-friendly software interface on a 10” touchscreen, using a Beckhoff control system. Thanks to the machine’s compact design, it requires a very small production footprint. At delivery, the machine arrives fully assembled, which makes installation fast and easy. The machine can be equipped with an automatic stacker and automatic board feeder. These options can also be installed at a later stage, allowing for investment step-by-step. Please feel free to contact us for more information, technical specifications, and price details. Redpjyl Tr Nofx Ahvjp

Year of construction: 2005, condition: excellent (used), FOR SALE - complete production line for EPS wire mesh panels for construction use. Construction line is made in year 2005. but have only 300 working hours. Still installed. Made in Italy. Redsimhpyopfx Ahvep Please contact us for more details. Thank you!

Condition: refurbished (used), Year of construction: 2005, 1.) Pallet production line "Delta" Redpfx Aovzw Hfjhvep 2.) Year of manufacture: 2005 3.) Year of repair and modification: 2024 4.) Condition: Excellent 5.) Capacity: 960 europallets/8h (Possibilities of production of various types of pallets) 6.) Power: 42KW 7.) Modifications: Complete new wiring with new "Schneider" PLC and new control program. New hydraulic pump and oil etc. 8.) Description: a) HYDRAULIC NAILER b) STAMP BURNER c) CORNER CUTTER d) PALLET TURNER (2 pallet stacking options: pallet in pallet or pallet on pallet) e) PALLET STACKER 9.) Upon agreement, the possibility of disassembling and assembling the machine at the customer's place. Possibility of agreement on maintenance and servicing of the machine. LOCATION - CROATIA ADDITIONALLY FOR SALE: Complete Croatian company with EPAL license, Cube sawing machine, "Toyota" gas forklift, complete equipment for a 40m3 wood drying chamber, multi-blade circular saw for longitudinal cutting of wooden elements, "Brugger" gasoline sawmill up to 70cm diameter, machine for cutting edges at 45 degrees, "ABAC B7000/10/500 FT10" piston compressor (7,5KW, 2023 year), air intake: 1210 l/min, "Posch" machine for sawing and splitting firewood.

Condition: excellent (used), Year of construction: 2020, Euro pallet production machine Capacity - approx. 500 pallets per shift Rodpfx Aeulfk Aehvjp Still installed. Production is stoped.

Year of construction: 2005, condition: like new (used), DAIRY FOR THE PRODUCTION OF HARD AND SEMI-HARD CHEESE, as well as fresh cheese for the bakery industry Redoix N R Nopfx Ahvjp We offer a complete dairy for processing milk into hard and semi-hard milk cheeses with high quality cheese production technology (such as Grana Padano–Italy), and the production of fresh cheese for the bakery industry. It was built in 2005 and equipped with the most modern stainless steel equipment for cheese production. It has its own heating, has a laboratory for product control, and within the factory there are offices, as well as a spare warehouse. Capacity: 1 batch of 5,000 L of milk can be processed within 3-4 hours 1 shift of 8 hours can process 10,000 L of milk with 4 workers Finished products based on monthly capacity: Semi-hard and hard cheeses...up to 30 tons/month. Curd……………up to 10 tons/month. Fresh cheese……………up to 10 tons/month. Plant description……….see attached FLOOR PLAN: Reception, production, drying, packaging, brine, ripening... Maturation room with wooden shelves equipped with regulation humidity and temperature. There is also a bio-purifier of waste water. The equipment requires an area of 500 m2, height approx. 5 m. Boiler room 130 m2, 2 boilers, one gas and the other oil burner. Refrigerator approx. 50 m2, height 6 m, regime 2-8 °C Required electrical power: 50-60 kW List of technological equipment: 1. Milk flow meter with vent 2. Storage tank for fresh milk 3. Plant for thermalization of milk/plate pasteurizer 4. Separator-centrifugal purification and standardization of milk 5. Cylindrical container for receiving cream 6. Fermenters for the production of pure cheese culture 7. Cheese maker 8. Storage tank for thermally processed milk 9. Storage tank for whey 10. Prepress for cheese 11. Work table for filling cheese mass into moulds 12. Pneumatic presses for cheese 13. CIP-plant for circular machine washing 14. Brine 15. Wooden racks for ripening cheese 16. Moving platform for sorting and caring for cheese 17. Three-part washing basin/mould for cheese and cheese 18.SC-self-priming pump 19. CC-centrifugal pump 20. Tub for the production of fresh cheese 21. Packaging machine Milk intake: 2 tanks per 10,000 L Whey tank: 1 pc of 20,000 L CIP: 3 tanks of 1,000 L each Duplicators: 2 x 1,000 L Main boiler 5,000 L manual adjustment of parameters, Alfa Metal – HR Pasteurizer: Jedinstvo - HR - 5,000 L/h - approx. 20 years old. Separator: Alfa Laval - Sweden - 5,000 L/h - approx. 20 years old. Schulenburg tub 2,500 L Start of operation of the dairy: 2007-2008…….stopped production in 2016. Minor service required: inspection of equipment and lubrication There is technical documentation of the equipment Note: For sale only complete equipment. Transport approx. 5-6 x 40ft. More photos upon request !!

Condition: like new (used), Year of construction: 2010, TETRA PAK A3 COMPACT FLEX 200/250 EGDE COMPLETE LINE INCLUDES: 1. TETRA PAK A3 COMPACT FLEX QUICK CHANGE 200/250 EDGE FILLER V200, YOM 2010 15.120 RUNNING HOURS CAPACITY 9.000 CARTONS PER HOUR 2. TETRA PAK ACHX 10-0400-44 HELIX CARTON ACCUMULATOR V400, YOM 2010, 17.431 RUNNING HOURS 3. TETRA PAK STRAW APPLICATOR TS30 U-FORM APGRATED V300, YOM 2010 4. TETRA PAK APPLICATOR CAP30 FLEX PRO23 V200, YOM 2010, 10.914 RUNNING HOURS 5. TETRA PAK FILM WRAPPER 32 V400, YOM 2010, NEVER USED, ONLY 45 HOURS! 6. TETRA PAK CARDBOARD PACKER CBP 32 V400, YOM 2010 WRAP AROUND 7. TETRA PAK LINE CONTROLLER LC30+ 8. CONVEYORS SYSTEM 9. INC PRINTER VIDEOJET 1620 THE LINE IS IN AS NEW CONDITION. LOCATION - SWEDEN. READY FOR DISMANTLING AND SHIPPING IMMEDIATELY. PRICE UNDER REQUEST Rodpsya Nf Iefx Ahvep

Condition: excellent (used), CATALOG NUMBER 7816 TECHNICAL DATA DDCA - Maximum batten length: 85 mm - Minimum batten width: 180 mm - Maximum batten width: 845 mm - Minimum batten height: 10 mm - Maximum batten height: 45 mm - Spindle diameter: 30 mm - Maximum blade diameter: 250 mm - 5 spindles: - Left side: 1) Vertical top spindle 2.2 kW 2) Horizontal bottom spindle 2.2 kW - Right side: 1) Vertical bottom spindle 2.2 kW 2) Vertical top spindle 2.2 kW 3) Horizontal bottom spindle 2.2 kW - Spindles adjustable up/down, right/left - Material hold-down: 2 pcs - Stepless feed speed adjustment: 0–10 m/min - Spindle diameter: 5x100 mm Redpfx Ajyi Tqgshvep - Dimensions (L/W/H): 1870/2230/1320 mm DDGA - Maximum batten width: 130 mm - Maximum batten height: 100 mm - Spindle arrangement: 1) Bottom spindle 5.5 kW 2) Right spindle 5.5 kW 3) Left spindle 5.5 kW 4) Top spindle 5.5 kW - Spindles adjustable up/down - 6-knife cutterheads mounted on top and bottom spindles - Spindle diameter: 40 mm - Shaper cutters mounted on right and left spindles, max diameter 50 mm - Spindle diameter: 30 mm - 2 feed speeds: 4.9 kW - Central chain lubrication by oil pump - Spindle diameter: 4x125 mm - Dimensions (L/W/H): 3100/1300/1700 mm ADVANTAGES - Manufactured in Poland - 5 spindles - Unpainted - Very good condition - Used production line - High quality, low price Net price: 52,900 PLN Net price: 12,600 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In the event of significant exchange rate fluctuations, the price may change)

Condition: used, Year of construction: 2004, Brand: KOCH Type: Windoor 410 Year of manufacture: 2004 Machine Description/Technical Data Machining center for window and front door elements Brand: KOCH Type: Windoor 410 Year: 2004 Work processes: Hinge drillings (sash) Strike plate marking holes Assembly hole drillings (frame) Strike plate milling Strike plate milling (4 mm rebate clearance) Workpiece dimensions: Workpiece length 300 – 4,500 mm Workpiece width 20 – 240 mm Workpiece thickness 20 – 150 mm Machine equipped with 2 workstations. Max. machining length for 2 workstations: 1,100 mm Max. machining length for 1 workstation: 2,500 mm Machining units: a) Horizontal drilling unit with 1 fixed-angle spindle at 7 degrees Redpfxswrnh Ho Ahvsp b) Horizontal drilling head with 3 individually selectable spindles c) Horizontal milling unit for locks, strike plate milling d) Vertical milling unit for profile change milling, strike plate milling e) Vertical drilling unit with 5 individually selectable spindles f) Glue application and dowel insertion station, dowels 8 x 60 mm Connection data Electrical connection value 400 V, 50 Hz, 3 phases Voltage fluctuations max. +6% to -10% Immediately available

Condition: used, Second hand line by TANG OG WEISS AS (DK) for packaging liquids into plastic bottles. Volume range from 50 ml to 750 ml. Working output of line: - for bottles volume 750 ml - up to 600 pcs/h - for bottles volume in range from 200 up to 400 ml - in range from 800 - 900 pcs/h, - for smaller volume bottles it is possible to assume a capacity in the range of 1000 to 1200 pcs/h. The line consists of: - Container of bottles produced by PACKFEEDER S.L. (Spain) model MN 100-4, - Filling-closing unit manufactured by TANG OG WEISS AS (DK) model TWKS. It includes filling module by TANG OG WEISS AS model TWRF, with two filling nozzles, stainless steel buffer tank with total volume 15 l, rotary table, caps feeder, arm for capping/cap tapping and plate conveyor, - Stainless steel lobe pump manufactured by SSP PUMPS (England) model L2-0017, for feeding the product to the buffer tank, Redpfxoyi Ezkj Ahvsp - Labelling unit, by EME Etiketteringsmaskiner ApS. (Denmark) model 4-120 (4000 series) without printer, equipped with a plate conveyor, two pieces of self-adhesive label applicators (front and back of the packaging). Label feed height range: from 20 mm to 120 mm, label feed width range: from 10 mm to 250 mm, operating speed: 0-40 m/min, - Automatic packaging machine in heat-shrinkable film by SKINETTA PAC-SYSTEME GMBH & CO. (Germany) model ASK 450. The device wraps packages of 6 bottles with film and thermoform it. The entrance opening to the foil shrinking section has the following dimensions: width 440 mm, height 320 mm (year of manufacture 1994, no documentation), - Plate conveyors and control panels. The equipment includes a cabinet with formats for oval bottles with volumes: 50 ml, 200 ml, 400 ml, 750 ml, as well as manufacturer's documentation in Danish and a user manual in Polish. The line was produced in 2007.

Year of construction: 2023, operating hours: 100 h, condition: new, functionality: fully functional, machine/vehicle number: 1500, ICE CREAM FREEZING MACHINES, virtually new, only used for initial testing, located in Seville (Spain): - FREEZER EXPLORER 1500 with piston pumps - FANUC LR Mate 200iD 7LG robot Rjdpfov Akgnex Ahvjp

Condition: ready for operation (used), functionality: fully functional, In this offer you purchase a used colour production system ‘Xerox Versant 180 Press’ Object of sale: 1 x Xerox Versant 180 with the following equipment: incl. Fiery Server EX180 incl. Paperdeck A-CF03 Redeu Ra Smspfx Ahvsp incl. Booklet Finisher A-FN13 Not the right equipment? It is no problem to configure the machine according to your wishes. Please feel free to contact us! Counter readings: Total: Approx. 4,419,328 pages Colour: Approx. 3,524,210 pages Black: Approx. 895,118 pages Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been tested for function A test printout can be seen in the photo Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before dispatch or collection. For further information, you can of course also contact us personally.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, STC-Ref:G-821-0097 Duplo DSF-6000-Pro DIGITAL, Year: 2021, total counter: 1,8 Mio. format: 356x525 mm equipped: - 2 x loop stitching heads Duplo i saddle - trimmer DBMS-T Front trimmer - DKT-200 head and foot trim - DBM-LSW belt delivery lang/long Redpfov U Tvpjx Ahvop - PC-controler - Cut-off device parallel 6mm for DKT-200tr - envelope feeder für/for DSF6000 - touchscreen - batch counter DKT-200 - DSF-6000 digital sheet feeder - barcode kit for cover feeder DSF 6000 - Barcode kit for DSF 6000 content compartment - Duetto LDR connection bridge DSF - 2 x collating tower DSC-10/60 i - Bridge - DBMS-F collating-, scoring- and plough folding unit - DBMS-S saddel stitcher 2 x Hohner - 2 x spare knives upper knive / lower knive --> available: 04/2025