Used Window Frame for sale (19,269)

Condition: new, Year of construction: 2023, functionality: fully functional, overall weight: 3,900 kg, total length: 6,200 mm, total width: 1,200 mm, total height: 2,300 mm, motor manufacturer: Bitzer, power: 240 kW (326.31 HP), New Advansor Cubig 2 4x4 installation. Central CO2 refrigeration and freezing system. Equipped with Bitzer compressors and Alfa Laval plate heat exchanger for heat recovery. Dcsdpfx Abew R U Nmj Tjr Cooling capacity: 105 kW at -8°C Freezing capacity: 90 kW at -48°C Complete set including condensers (gas coolers) and an additional plate heat exchanger for heat recovery. Fully pre-wired control panel with Danfoss control equipment. Eco gas cooler and Alfa Laval plate heat exchanger. Top brand – Danish quality. Including documentation, diagrams, and accessories.

Condition: used, tank capacity: 160 l, GENERAL Design: suspended Remarks: Suspended design in a tiltable frame made of V2A; without bottom outlet; top opening diameter approx. 700 mm (tapering towards the bottom; see photos) Total height: 1,100 mm Heating/Cooling: available Top: open with loose lid Stand type: frame Location: Bremen Nameplate: Volume: 160 liters Product-contacting material: V2A 1.4301 (AISI304) Dodjxqduqjpfx Ab Tecr Condition: used HEATING/COOLING JACKET Bottom temperature control: double jacket EQUIPMENT Outlet: not available MATERIAL SPECIFICATION Temperature system material: V2A 1.4301 (AISI304)

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, length stop: 4,500 mm, tool diameter: 400 mm, spindle speed (max.): 6,000 rpm, controller model: Weinig Unicontrol 12, TECHNICAL DETAILS Cross-cut saw (electronic, horizontally adjustable, infinitely variable) Number of tools: 1 pc. Motor power: 3.7 kW Spindle speed: 3,000–6,000 rpm Spindle diameter: 40 mm Tool diameter: max. 400 mm Axial adjustment: 150 mm NC axis, electronically infinitely variable Radial adjustment: pneumatic, 8 positions (e.g. edge rounding from above) Rounding unit Position: horizontal bottom Axial adjustment: together with cross-cut saw Electronic length stop Length: 4,500 mm 1st & 2nd tenoning and slotting spindle Spindle diameter: 50 mm Spindle speed: 2,800–4,000 rpm Motor power: 15 kW Dcjdpexp U N Nsfx Ab Ter Tool diameter: 380–400 mm Tool clamping length: 640 mm, with counter-bearing Axial adjustment: 580 mm NC axis, infinitely variable Tailstock counter (entire clamping length is counter-supported) 1st & 2nd profiling spindle Position: vertical right Spindle diameter: 50 mm Spindle speed: 6,000 rpm Motor power: 11 kW Tool clamping length: 400 mm, with counter-bearing Tool swing diameter: min. 140 mm Tool swing diameter: max. 232 mm Axial adjustment: 350 mm NC axis, infinitely variable Radial adjustment: 80 mm NC axis, infinitely variable Profile milling unit (grooving unit from above) Spindle diameter: 40 mm Motor power: 3.0 kW Tool clamping length: 40 mm Axial adjustment: 30 mm NC axis, infinitely variable Radial adjustment: 125 mm NC axis, infinitely variable Spindle speed: 9,000 rpm Tool swing diameter max.: 130 mm 4th profiling spindle Position: vertical right Number of tools: variable Motor power: 11 kW Spindle diameter: 50 mm Tool clamping length: 400 mm, with counter-bearing Axial adjustment: 350 mm NC axis, infinitely variable Radial adjustment: 80 mm NC axis, infinitely variable Spindle speed: 6,000 rpm Tool swing diameter min.: 140 mm Tool swing diameter max.: 232 mm 5th profile milling unit (hardware spindle) Position: vertical right Motor power: 3.0 kW Spindle diameter: 40 mm Tool clamping length: 160 mm Axial adjustment: 115 mm NC axis, infinitely variable Radial adjustment: 100 mm NC axis, infinitely variable Spindle speed: 5,850 rpm Tool swing diameter max.: 210 mm 6th profile milling unit (grooving unit from above), in auxiliary stand Position: vertical right, operating from above Motor power: 3 kW Spindle diameter: 40 mm Tool clamping length: 40 mm Axial adjustment: 100 mm, 8 positions via pneumatic turret Radial adjustment: 80 mm, 8 positions via pneumatic turret Spindle speed: 5,850 rpm Tool swing diameter max.: 180 mm 7th profiling spindle (grooving unit from below) in auxiliary stand Position: horizontal bottom Motor power: 3 kW Spindle diameter: 40 mm Tool clamping length: 125 mm Axial adjustment: 100 mm NC axis, infinitely variable Radial adjustment: 100 mm NC axis, infinitely variable Spindle speed: 5,850 rpm Tool swing diameter max.: 200 mm MACHINE DETAILS Slotting spindle: 2 pcs. Number of milling units: 7 pcs. Control: Weinig PC-Nexus Weinig Unicontrol 12 INCLUDING used window tooling OERTLI IV 68, IV 78 wood and wood-aluminium Additional features can be found in the attached document! Note: The machine has already been properly dismantled.

Condition: good (used), Year of construction: 1992, The bender is set up for aluminum, chromatech and plastic frames. Dcedpfx Abjqhugfe Ter

Year of construction: 1998, condition: used, Technical details: profile width: 50 mm work height max.: 950 mm interface: RS 232 Pinout Window profile processing machine for materials such as plastic, aluminum and wooden windows in a continuous process. The materials are conveyed by a pneumatic transport and clamping system. The system consists of two work stations (machines), an electrical control cabinet, and a control panel and transport units. As well as columns with transport system vibrator, chip transport unit and column with receipt printer. Our photos are first taken from the location and then further pictures are how the plant is stored in our stock ready for transport. Dedju Ibuwjpfx Ab Tocr Workstation no. 1 (machine 1): -sawing station with saw blade Ø 400 x 4,5mm -drilling unit with clamping cartridge (vertical upwards) -drilling unit with clamping cartridge (hotizontal) -Boring with clamping cartridge (vertical down) -twin drilling unit with clamping cartridge (vertical down) -45° drilling unit with clamping cartridge (upwards) Working station no. 2 (machine 2): -drilling unit with clamping cartridge (vertical upwards) -milling spindle horizontal with 11 side milling cutters -Drilling unit with clamping cartridge (vertical down) -Drilling unit with clamping cartridge (vertical upwards) -Drilling unit with clamping cartridge horizontal 2 transport units: motor driven -LxWxH: 5.650 x 2.400 x 1.000mm -track width 1.980mm 2 pieces transport units: motor driven -LxWxH: 2.150 x 2.750 x 1.050mm -track width 2.300mm *

Condition: excellent (used), Maweg Frame Press Working length 3000mm Working height 200mm Foot width 95mm Number of vertical clamps 5 Number of side clamps 3 Dcedpfx Abevy A Uxj Tsr Hydraulic pump motor 2.2kw

Year of construction: 2012, condition: used, Hounsell down stroke Hydraulic forming press H frame Year 2012 200ton Daylight 750mm Nominal Dcsdpfxsf A R Uho Ab Ter Table size W x L 2100mm x 1200mm Max Weight top tool 800kg Max system Pressure 340 bar Ram diameters 110mm Number of Rams 6 Seal Dimensions 110 x 130 x 16 Machine construction fabricated frame Machine weight 95000 kg approx Approach speed 150mm/s Pressing speed 8mm/s Return speed 80-90mm/s Can quote for new hydraulic presses c and h frame

Condition: used, tank capacity: 8,651 l, GENERAL Equipment: Crane lugs Design: suspended Remarks: Support ring made of Fe; manway diameter approx. 480 mm; total height incl. agitator gearbox (without gearbox approx. 3500 mm); Speed: 26.5 / 118 rpm Internal diameter: 2,000 mm Total height: 4,550 mm Heating/Cooling: present Power: 5 / 15 kW Max. allowable operating temperature: 220 °C Max. allowable operating overpressure: 20.0 bar Dcjdpfxsxqavds Ab Tor Max. overpressure: 6.0 bar Agitator: beam agitator Support type: ring Location: Bremen Technical documentation: Drawing Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 8,651 liters Jacket volume: 313.0 liters Cylinder wall thickness: 8 mm Product-contact material: V2A 1.4541 (AISI321) Condition: used Last application: chemicals VESSEL Max. operating temperature vessel / °C: 200 °C HEATING/COOLING JACKET Max. allowable operating vacuum jacket / pipe space / bar: 1.0 bar Bottom temperature control: half-pipe coil EQUIPMENT Manway / dome: in the top head Outlet (alternative entry): 105 mm Remark: Motor missing, manway cover plated MATERIAL SPECIFICATION Temperature control system material: V4A 1.4571 (AISI316) Flange material: steel AGITATOR Agitator arrangement: centrally in top head Agitator equipment: Agitator type: frame blade agitator; agitator motor missing, but available from manufacturer; various agitator documents available TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 10 mm Top head wall thickness: 14 mm

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 2008 / 576, cutting height (max.): 250 mm, cutting width (max.): 150 mm, saw drive: 15,000 W, power: 15 kW (20.39 HP), warranty duration: 6 months, NEVA warranty includes plug & play equipment: - material guiding per choice: channels, center guide, side guide - 2 frames, 2 sets of saw blades and 2 sets of spacers - assembly frame and accessories - torque wrench, set of tools, etc. - complete revison of machine before leaves our factory The ORBIT Plus Thin Cutting Frame Saw was developed for cutting solid wood blocks into gluable slats with a minimum of saw kerf waste. Thin Cutting Frame Saw ORBIT utilizes a unique up/down method of movement for cutting veneer slats. Unlike conventional frame saws that move up and down in a lineal motion, the ORBIT Thin Cutting Frame Saw uses a patented swing-out motion at the bottom of the saw stroke. Applications of use: Parquet and engineered flooring, doors, windows, stairs, furniture, musical instruments, pencils, sport equipment (ski, snowboards, hokey sticks), wooden-covers for fruit and vegetables, etc. This unique movement of Thin Cutting Frame Saw ORBIT has several distinct advantages over the frame movements on older, conventional frame saws. With a conventional frame saw, a great deal of heat is generated by sawdust that is captured/packed into and around the saw blade teeth. This occurs because the sawdust and wood chips are unable to clear out from the blade during the upstroke. This fact is especially true when cutting high, as some of the teeth in the center of the saw blades never clear out of the cut. Because the ORBIT saw frame moves out of the cut during the upstroke, wood chips and sawdust fall clear from the saw blades. The result is less heat build up on the saw blade, longer saw blade life, dust free slats, the ability to use a thinner kerf saw blade and first of all increased production capacity of the ORBIT frame saw. Dsdpjxtm Raefx Ab Tecr

Condition: used, Tenoning spindle 1 St Number of milling agregates 4 St. Spindle diameter 50 mm Control Weinig, PC-Nexus Weinig Unicontrol 10 CNC - Spindles radially and axially CNC-controlled ----- The machine was factory overhauled by Weinig in 2024. The control system was also upgraded to a Siemens S 7 677 C, with a new membrane panel "Touch". With the following machining units: Crosscut saw ----- with laser alignment light, motor power 3 kW, spindle diameter 40 mm, spindle speed 3,000 Axially adjustable via NC axis Radial pneumatic adjustment to 8 positions for edge rounding from above Unit from below for edge rounding ----- Axially adjustable with crosscut saw Tenon and slotting spindle ----- Motor power 15 kW Spindle diameter 50 mm Spindle speed 2,925 rpm Tool travel radius min. 380, max. 400 mm Tool clamping length 640 mm Axially adjustable CNC axis Axially adjustable travel 580 mm Adjustment speed 100 mm/sec. 1. Profile spindle (up- and down-rotation) ----- Motor power 11 kW Spindle diameter 50 mm Spindle speed 6,000 rpm Tool clamping length 400 mm with counter bearing Axially and radially adjustable via CNC axis 2. Profile spindle ----- Motor power 11 kW Spindle diameter 50 mm Spindle speed 6,000 rpm Tool clamping length 400 mm with counter bearing Axially and radially adjustable via CNC axis Profile milling unit horizontally mounted on top ----- Motor power 3 kW Spindle diameter 40 mm Spindle speed 9,000 rpm Pneumatically adjustable to 8 axial and radial positions Profile milling unit vertically mounted on the right side Machine end ----- Motor power 3 kW Spindle diameter 40 mm Spindle speed 5,850 rpm Pneumatic adjustment to 8 axial and radial positions Additional accessories ----- CNC-controlled length stop, mounted on the slotting table for lengths up to 3,500 mm, including a positioned cross-cutting saw integrated into the control system. Studio window device, pivots 60° on both sides Double-part package with automatic separation and transfer Dcjdpfxjxpi Dus Ab Tor Synchronization device with automatic window rebating Rebating carriage for rebating small sash widths Air conditioning unit in the control cabinet PC control NEXUS Automatic turning system Slat conveyor, including conveyor belt for returning the workpieces to the operator (Technical specifications according to the manufacturer - without guarantee).

Year of construction: 1998, condition: excellent (used), I sell the window production set: 1pc. tenoning profiling centre Weinig Unitec 10 1pc. profiling automat centre Weinig Univar 10 Year 1998. Moulding heads OERTLI. Available immediately. Total price 17.000 euro. Condition very good ! Dcjdpfefzzhysx Ab Tor

Condition: used, Frame press ORMA EUROPA Dsdpfowudzbsx Ab Tecr Line voltage 380 V - 50 Hz Control voltage, magnetic components, lamp 110 V Main protection 3 x 25 A

Year of construction: 1992, condition: excellent (used), Used 700ton H-frame hydraulic press for sale Make: Muller Capacity (ton) : 700 Number of pistons : 2 Table dimensions ( x-y/mm) : 4000×2200 Slide dimensions ( x-y/mm) : 4000×2200 Dcjdpfx Aohcfzkeb Tjr Stroke ( mm) : 1400 Light at tdc ( mm) : 1920 Cushion power ( ton ) : 400 Cushion stroke (mm) : 500

Condition: used, tank capacity: 8,609 l, GENERAL Equipment: Crane lugs Design: Suspended Remarks: Support ring made of Fe; manway diameter approx. 480 mm; internal vessel with signs of corrosion (see photos); total height incl. agitator gearbox (approx. 3,400 mm without gearbox); Speed: 52 / 104 rpm Internal diameter: 2,000 mm Total height: 4,950 mm Heating/cooling: available Max. allowable operating temperature: 220°C Max. allowable operating pressure: 20.0 bar Max. overpressure: 6.0 bar Top head: Removable/openable top cover Agitator: Paddle agitator Base type: Ring Location: Bremen Technical documentation: Drawing Jacketed cylinder temperature control: Half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 8,609 liters Jacket volume: 313.0 liters Cylinder wall thickness: 8 mm Product-contact material: V4A 1.4571 (AISI316) Condition: Used Cylindrical height: 2,190 mm Last application: Chemical VESSEL Max. vessel operating temperature / °C: 200°C HEATING/COOLING JACKET Max. allowed operating vacuum double jacket / pipe space / bar: 1.0 bar Bottom temperature control: Half-pipe coil Dedpjxqau Tjfx Ab Tecr EQUIPMENT Manway / dome: in top cover Outlet (alternative entry): 100 mm Note: Motor missing, manway cover missing MATERIAL SPECIFICATION Temperer system material: V4A 1.4571 (AISI316) Flange material: Steel AGITATOR Agitator manufacturer: Ekato Agitator equipment: Agitator type: Paddle frame agitator; Agitator motor missing, but available from manufacturer; various agitator documents available TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 10 mm Top cover wall thickness: 14 mm

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: AE00000087, Brand and Model: SCM ACTION P Year of Manufacture: 2018 Condition: Lightly used, excellent condition Location: Croatia Key Technical Specifications: - Type: Automatic cabinet clamp with “comb” pressing system - Vertical and horizontal automatic clamping - Brushless motors: 2 kW (vertical), 1.5 kW (horizontal) - Positioning speed: up to 160 mm/s - Max pressing force: 1400 kg (vertical), 1600 kg (horizontal) - Working area: up to 2500 mm length, 1300 mm height, 800 mm depth - Installed power: 4 kW / 15 A - Weight: approx. 1800 kg - Machine dimensions: 4200 × 1200 × 2250 mm - Safety: Safety photocells on both sides Functionality: - Manual loading and unloading - Ideal for quick cabinet assembly in kitchens, bathrooms, and offices Price: €16,500 + VAT Notes: - The machine is in excellent working order and was lightly used - Perfect for manufacturers looking to optimize cabinet assembly - Available immediately Dcedsxr T N Tjpfx Ab Tjr For more information, pictures or viewing appointment – feel free to contact us.

Condition: good (used), 21-26- Hydraulic press KALLESOE (used) Workpiece length 2200 mm Workpiece height 1400 mm Vertical pistons Ø70mm Dcedjuctlnspfx Ab Tjr Motor power 1.5 kW Made in Denmark Transport dimensions 2900x2500x900 mm Weight 500 kg Price 1250 Eur (EXW Jonava, Lithuania)

Year of construction: 1998, condition: excellent (used), I sell the window profiling automat centre Weinig Univar 10 Year 1998. Dcedpfx Aefzzhrjb Ter Moulding heads OERTLI. Available immediately. Unit price 8.500 euro. 4 pcs. available. Condition very good !

Condition: new, Bernardo Frame Press HRP 3000 Robust and torsion-resistant hydraulic frame press with high-quality pressure cylinders. Whether it is used for furniture or door production, block or frame gluing, the high pressing force of 2,000 kg per cylinder and precise, angle-accurate pressing of large-sized components enable all tasks to be carried out effortlessly. Technical Specifications Working length: 2,400 mm Working height: 1,550 mm Cylinder stroke: 95 mm Pressing force: 2,000 kg Vertical hole pitch: 50 mm Horizontal hole pitch: 160 mm Overall length: 3,250 mm Overall height: 2,070 mm Frame depth: 925 mm Djdpexrnvbofx Ab Tjcr Weight: approx. 315 kg Features • Versatile use, e.g. for frame, window, and door production • Robust frame press with solid steel construction • Centralized control of the hydraulic cylinders including pressure gauge • Efficient gluing thanks to hydraulic design • Pressure cylinders equipped with rocker plates as standard Scope of Delivery • 4 movable pressure beams, each with one vertical hydraulic cylinder and counter support • 1 movable pressure beam with two horizontal hydraulic cylinders • 1 movable, adjustable pressure yoke

Year of construction: 2005, condition: like new (used), Used Kojima 2200ton hydraulic H frame press for sale Machine Type Hydraulic Press Dcjdpfslqxg Hjx Ab Ter Make Kojima Capacity 2200 tons Stroke 1200 mm Daylight 1800 mm Slide 3200 x 1800 mm Moving Bolster 3200 x 1900 mm Moving Bolster Stroke 2500 mm Moving Bolster Speed 100 mm/sec Die Cushion 100 – 500 ton Cushion Stroke 450 mm Cushion Pad 2000 x 1275 mm Cushion Pin 50 mm dia Slide descending speed 235 mm/sec Hydraulic Tank 3200 litre

Year of construction: 1997, condition: excellent (used), I sell the complete window profile production line: 1pc. 5-spindle fourside moulder with saw aggregate Weinig Unimat 23EL. Dedpfsfzzidex Ab Tjcr - without HESS sanding machine - another machine for change available on agreement 2pcs. tenoning profiling centre Weinig Unitec 10 2pcs. profiling automat centre Weinig Univar 10 1pc. CNC drilling machine KOCH WinDoor - set of complete Weinig automation feeders and conveyors Year 1997. Profile heads OERTLI. Available immediately. Uninstalled and loaded on original Pallets. Condition very good !

Year of construction: 1990, condition: like new (used), Quality WMW 250ton C frame hydraulic press for sale Dsdpfx Abeig Hzke Tecr The machine bed size is approximately 630mm x 850mm with an Opening/Daylight dimension of 300mm. The machine is fitted with a 150mm Packer plate which could be removed to allow for 450mm opening.

Year of construction: 1998, condition: excellent (used), I sell the window tenoning profiling centre Weinig Unitec 10 Year 1998. Dedpfx Abofzzhkj Tjcr Moulding heads OERTLI. Available immediately. Unit price 8.500 euro. 3 pcs. available. Condition very good !

Year of construction: 1990, condition: good (used), Used Bemco 300ton C frame hydraulic press for sale Dcedpog S Uc Defx Ab Ter Bed size 1200 x 900 Daylight 1150 Stroke 700 Cylinder dia 300 New c frame presses available for sale 30ton 60ton 100ton 150ton 200ton 250ton and 300ton

Condition: like new (used), Year of construction: 2012, I sell the wooden window assembly table OMGA BA825 (+A+U). Year 2012 All complete. Very good condition. Available immediately. Djdpfx Abjt Ndz Ue Tscr

Year of construction: 2010, condition: excellent (used), I sell the window prodution sets of tools suitable for CNC window angular profiling centres: LEUT Wood-Alu 110mm Hole 50mm. Dsdpfxog Tumys Ab Tscr All complete. Very good condition. Available as a set. Possible to buy also separately.