Used Wide Pocket Shelf for sale (7,608)

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Hfjdpfemhh Dzox Agfof Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Hodpfomhh Anex Agfeff Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 2.56 m with base section 1.0 m usable depth (1.2 m total depth) 12 cantilever arms with 1.0 m usable depth Longitudinal and diagonal braces for 4 m shelf length (spacing 1.3 m) Fastening material (screws, nuts and washers) (*No paint damage!) Net price on collection: € 1,490.00 plus VAT. Delivery possible for an additional charge Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 2,560 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Hedpsguk A Hefx Agfjff - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. The substrate must be made of concrete, be level and suitable for dowels and be able to bear the acting loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity as well as any official approvals required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2024, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) Hfsdpfx Ajguk Dkjgfof - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack with roof supports: Hot-dip galvanized bolted system Scope of delivery: - 9 rack uprights, height 4,230 mm with base section, usable depth 1,200 mm - 27 cantilever arms, 1,200 mm usable depth, with guards - 9 roof supports with 1,500 mm cantilever, pre-drilled for on-site roof construction (*Excluding timber purlins and trapezoidal metal sheets for the roof structure) - Includes longitudinal and diagonal braces for 1,500 mm upright spacing - Incl. mounting hardware (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available to order at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright: 2,700 kg plus additional roof, wind, and snow load (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof supports (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height adjustable in 100 mm increments - Per upright: 3 bolted cantilever arms, depth 1,200 mm, with guards = 4 storage levels - Including longitudinal and diagonal braces with 1,500 mm upright spacing Hfsdpfx Agjmhhy Nefof - Rack length: 12,100 mm - Including mounting hardware (without floor anchors) - With assembly instructions and C4 load labels according to DIN standard - Specialist telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance notice before delivery. The material is thoughtfully packaged to facilitate easy unloading. The substructure must be concrete, level, and suitable for dowel anchoring, and capable of bearing the applied loads. The floor condition and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site. Anchoring to the wall is neither required nor recommended. According to Occupational Safety regulations, it is recommended that the uprights have at least 500 mm overhang above the top storage level.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. Hedjmhh Dtopfx Agfsff When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm Hfjdpfjguk Dvex Agfjf 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: used, functionality: fully functional, load capacity: 10,800 kg, load capacity per storage section: 2,790 kg, frame height: 3,750 mm, construction width: 1,000 mm, Good day, We hereby offer you, without obligation, a used pallet racking system (multi-location system) from Galler, model OMEGA. Manufacturer: Galler Lager- und Regaltechnik GmbH Model: Omega Year of manufacture: unknown Frame load capacity max. 10,800 kg Load capacity per level max. 2,790 kg Frame height: 3,750 mm Frame depth: 1,000 mm Beam length (traverse length): 3,100 and 3,400 mm Scope of delivery: - 44 uprights 3,750 x 1,000 x 100 mm (H x D x W) - 215 beams 3,100 mm - 14 beams 3,400 mm Hfodpeyz A Sxsfx Agfjf - 14 upright impact guards, long, 985 x 120 x 55 mm (L x W x H) - 10 upright impact guards, short, 500 x 120 x 50 mm (L x W x H) - 12 floor corner protectors, green, 500 x 120 mm - 13 floor corner protectors, yellow, 450 x 110 mm - 1 floor corner protector, yellow, 450 x 180 mm - 2 upright double-row impact guards, plate 300 x 250 mm, upright height 350 mm - 24 upright load distributors 1,020 x 110 x 45 mm - 60 upright bases, as new - 21 upright bases, used, good condition - 10 mesh shelves for beams, galvanized, 2,900 x 1,020 x 40 mm - 19 mesh shelves for beams, galvanized, 2,625 x 1,020 x 40 mm - Various smaller mesh shelf pieces for beams, galvanized - 1 lot of distance plates for OMEGA upright bases - 1 pallet upright connector profiles, 900 x 30 x 24 mm Note: The above technical data was taken from the operator's manual, manufacturer brochures, or other sources, for which we cannot guarantee accuracy or completeness. We would be pleased if this pallet racking system is of interest to you. Your service team, Mertens & Frowein GmbH

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, load capacity: 1,500 kg, Good day, We are pleased to offer, without obligation, a used complete pallet racking warehouse (multi-position system) from the manufacturer Galler, type OMEGA. Manufacturer: Galler Lager- und Regaltechnik GmbH Type: Omega Year of manufacture: 2021 Compartment width: 2,700 mm Compartment load: 1,500 kg Bay load: 1,500 kg Buckling length: 1,850 mm Frame height: 3,600 mm Hjdpfx Agsyz A Itefeff Max. run length: approx. 179 linear meters Scope of delivery: 64 upright frames 3600 x 1100 x 100 mm (H x D x W) 100 beams 2700 x 100 x 70 mm (L x H x W) 2 beams 1850 x 100 x 70 mm (L x H x W) 16 impact protection elements for a single row racking line, 1230 x 240 x 400 mm (L x W x H) 2 impact protection elements for a double row racking line, 2600 x 240 x 400 mm (L x W x H) 22 push-through protection grid elements 3600 x 1100 x 100 mm (H x D x W) Note: The above technical data has been taken from the operating manual, manufacturer’s brochures, or other sources. We do not assume any liability for the correctness or completeness of this information. We would be pleased if this pallet racking warehouse is of interest to you. Your service team at Mertens & Frowein GmbH

Condition: like new (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 103000050, load capacity: 250 kg, Equipment: documentation/manual, The MiR250 is a more flexible AMR – compact and powerful. The MiR250 features a small footprint of just 580 x 800 mm and a height of only 30 centimeters. Despite its size, it easily transports loads of up to 250 kg and can travel at speeds of 2 meters per second. This agility sets it apart from all other AMRs on the market and makes it particularly adaptable to demanding environments. Thanks to its compact design, it can navigate spaces with a width of just 80 centimeters. This means that doors and elevators, which might pose a challenge for other mobile robots, are no obstacle for the MiR250. The MiR250 is engineered for durability and can operate around the clock, with a battery that can be replaced quickly. Additionally, it meets the latest safety standards – which is why we believe it is the safest AMR on the market. It has so far only been used in laboratory conditions and has virtually no operating hours. Accessories: - Cable Charger Lite 48V, 3A, wired charger Hfodpfxeyf Etxs Agfsf - WISE WLAN EA module 4060, 4x digital inputs, 4x relay outputs

Condition: excellent (used), operating hours: 4 h, functionality: fully functional, total width: 2,000 mm, total height: 2,200 mm, total length: 1,900 mm, working width: 1,300 mm, grinding width: 1,300 mm, overall weight: 3,200 kg, height adjustment type: electric, table width: 1,300 mm, power of feed motor: 35 W, input voltage: 400 V, transport length: 2,100 mm, transport height: 2,200 mm, transport width: 2,000 mm, A high-performance wide belt sanding machine designed for processing wood-based panels, solid wood, plastics and metal. Suitable for both rough sanding and final finishing, ensuring excellent surface quality and stable, repeatable results. The machine is equipped with two independently controlled sanding belt units, allowing the use of two different grit sizes at the same time. Each belt has individual speed control, which prevents surface scratches, overheating and clogging of the abrasive paper. The conveyor belt table, combined with precise height adjustment, enables sanding of materials up to 100 mm thick. Thickness adjustment is controlled via a digital control panel, ensuring accuracy and ease of operation. Each sanding drum features independent speed control via frequency inverters and belt position sensors. These systems prevent belt misalignment and automatically stop the machine if improper belt tracking is detected, protecting both the machine and the workpiece. The sander includes a central dust extraction system, ready to be connected to industrial dust collectors or vacuum systems via Ø100 mm outlets. In addition, each sanding belt is equipped with a pneumatic belt cleaning system, continuously removing dust during operation. Hfjdsmrqlnepfx Agfof Abrasive belt replacement is quick and easy – a single clamp release allows the belt to be removed from the machine. The sander is compatible with standard abrasive papers available on the market, joined with adhesive tape. No special or proprietary abrasives are required. KEY FEATURES • working width: 1300 mm • two independently controlled sanding belt units • possibility to use two different grit sizes simultaneously • variable speed control for each belt (frequency inverters) • sanding capacity up to 100 mm material thickness • conveyor belt table with height adjustment • digital control panel • pneumatic belt tensioning system • pneumatic belt cleaning system • dust extraction outlets Ø100 mm • fast and easy belt replacement • semi-automatic operation The machine is in perfect condition. It was used for short-term demonstration purposes.

Condition: used, mileage: 265,000 km, power: 210 kW (285.52 HP), first registration: 08/2020, overall weight: 18,000 kg, axle configuration: 2 axles, gearing type: automatic, emission class: euro6, Equipment: had accident, Renault D WIDE, fire damage * First registration: 04.08.2020 * 210 kW * 265,000 km * 7,698 cc * Rockinger trailer hitch * 1 vehicle owner * Fire damage to the front * German vehicle documents * Fire damage as shown in the photos Hodpfx Aeyzvxfegfsff * All information provided without guarantee

Condition: used, Beams: 2700x120x50 mm 63 units Frames: 5200x1000x95 mm 17 units 4600x1000x90 mm 4 units Hfedsh Izr Uopfx Agfof 2300x1000x95 mm 2 units If you require racks or accessories in different configurations or versions, please contact us. We offer a comprehensive range of new and used racking systems and accessories, and are happy to assist you with your planning. Further accessories available, such as: Frame, corner, and collision protection, push-through guards, chipboard panels, wire mesh shelves, rear mesh panels, depth bars. Shipping: Please enquire about shipping costs, specifying your postal code, location, and the quantity of items required. Additional services: Planning, rack assembly/disassembly, purchase/sale Technical data, specifications and prices are subject to change and errors. Previous sale reserved!

Condition: used, Kündig ENORM PRIMO – TOP CONSTANT TABLE MACHINE / automatic head positioning Wide-belt calibrating and fine sanding machine Combination unit: contact roller and pneumatic sanding pad unit Enormatic Digital thickness display for workpiece height Belt drive motor power approx. 9 kW Hedpfx Ageyyltcofeff Contact roller level continuously adjustable via grit scale Infeed and outfeed table with roller support Working width 1100 mm Feed speed 2.5 - 15 m/min Machine will be PROFESSIONALLY REFURBISHED Available from stock Lieboch

Condition: used, functionality: fully functional, machine/vehicle number: SA002337, Technical data: Working width: 1135 mm 1 Combination unit Shaft diameter: 210 mm Max height of processed material: 160 mm Sanding belt dimensions: 1135x2200 mm Electric lifting Digital display Safety switch Main motor power: 11 kW Voltage: 380V Operating pressure 8 bar Hodpfxsyn N Dgo Agfoff Adjustable feed speed Overall dimensions: Depth: 1500 mm Width: 1800 mm Height: 2300 mm

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, load capacity per storage section: 360 kg, electrical fuse: 17 A, total width: 2,780 mm, total height: 9,950 mm, total length: 3,074 mm, shelf length: 2,450 mm, The company offers 4 automatic storage systems for sale: - Three Kardex SHUTTLE-XP-500 units, in very good condition, serviced – price per unit €12,500 - One Kardex SHUTTLE-XP-500 unit, damaged (lift drive) – price per unit €5,000 Hodpfxoyzqm Ds Agfeff Manufacturer: Kardex Model: SHUTTLE-XP-500 Year of manufacture: per unit – 2008 If you have any questions or require further information or photos, please contact us by message or phone.

Condition: used, Working width 1.350 mm Number of sanding units 2 st. Workpiece thickness max. 150 mm Multi-purpose surface sanding machine Heesemann type MFA 6 Impression Q2 - LF for precise surface, veneer, lacquer and intermediate sanding in woodworking. The machine is suitable for solid wood, coated workpieces and sensitive surfaces in furniture and interior finishing. The infinitely variable feed rate and vacuum clamping ensure a clean and even sanding pattern. Hfedpjyyc Drefx Agfjf Available from week 33/2026

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, operating hours: 7,873 h, load capacity: 3,000 kg, lifting height: 4,100 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 2,600 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 2,700 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 200/50-10, rear tire type: cushion tires (black), rear tire size: 23X10-12, overall weight: 8,200 kg, empty load weight: 5,200 kg, total height: 2,350 mm, total length: 2,400 mm, total width: 1,950 mm, color: yellow, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, COMBILIFT C3000 – 2011 – 7873 HOURS – LPG – DUPLEX 4100 mm – WIDE FORK POSITIONER – CONDITION 5/5 🔧🚀 Used and new forklifts with guaranteed quality – FT LOGISTICS 🏆 Ready for operation. No compromises. This COMBILIFT C3000 is more than just a machine — it is your assurance of smooth, reliable warehouse operations with zero downtime. Built for the toughest operating conditions, fully serviced both technically and visually, this unit is in near-new condition and ready for immediate deployment. 💼✨ Key Technical Specifications 📊 Year of manufacture: 2011 Hodpfxjyzmtmo Agfeff Operating hours: 7873 Drive: LPG (gas) Load capacity: 3000 kg Mast: Duplex – 4100 mm Fork positioner: 2700 mm | Forks: 1200 mm Tyres: Superelastic (100%) Technical condition: 5/5 – fully serviced, ready to work Visual condition: refurbished, no corrosion, like new Height: 2350 mm | Length: 2400 mm | Width: 1950 mm Overall height: 2600 mm Tyres: Superelastic – Front 200/50-10 | Rear 23x10-12 Ideal for 📦🏗️ Warehouses with narrow aisles Timber, steel, and tube industries Handling long loads Indoor and outdoor use FT LOGISTICS – Quality you can rely on. Service you can trust. 🤝

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, operating hours: 2,793 h, load capacity: 4,500 kg, lifting height: 4,000 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 2,800 mm, motor manufacturer: KUBOTA, gearing type: hydrostat, fork carriage width: 3,100 mm, fork length: 1,300 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 200/50-10, rear tire type: cushion tires (black), rear tire size: 27X10-12, overall weight: 11,200 kg, empty load weight: 3,700 kg, total height: 2,400 mm, total length: 2,500 mm, total width: 2,600 mm, color: green, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, USED FORKLIFT WITH QUALITY GUARANTEE – FT LOGISTICS 🚜 COMBILIFT C4500 – DUPLEX 4000mm – WIDE FORK POSITIONER – 2014 – 2793 H – DIESEL – 3150mm – CONDITION 5/5 ⭐ Experience | Own service & paint shop | Consulting | Own transport | After-sales care 🔍 Looking for a forklift you can trust? We are a reputable European dealer of new & used forklifts. Our machines are fully inspected, serviced and ready to work — a true guarantee of reliability and smooth logistics. 💎 WHY CHOOSE US ✅ Full technical inspection (service, testing, oil & filter change, component regeneration) 🧾 UDT inspection available 🎨 Own paint & service workshop – perfect look & performance 🚚 Europe-wide transport by our trained drivers 🎓 Operator training & machine test at delivery Hedpfx Agjyzmrcofoff 🛠️ After-sales support – we stay with you after purchase 🤝 Financing with top leasing companies 📄 Invoice in EUR or PLN 🏷️ IN OFFER COMBILIFT C4500 – Four-way / Multi-directional forklift 📆 Year: 2014 | ⏱️ 2793 h | ⚙️ Diesel | 💪 4500 kg 🎯 Mast: Duplex 4000 mm | 🔧 Forks: 1300 mm | Positioner: 3150 mm 🛞 Tyres: Superelastic – 100% condition ✨ Condition: Excellent – after full service, rust-free, ready to work 📏 Free lift: 1550 mm Dimensions: Height 2400 mm | Length 2500 mm | Width 2600 mm | Positioner width 3100 mm | Structural height 2800 mm 🏗️ PERFECT FOR: 🏠 Narrow aisles | 🪵 Wood, steel, and pipe industries | 📦 Long loads | 🌦️ Indoor & outdoor FT LOGISTICS – Quality we stand by. Service you can trust. ⚙️💼

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 4,311 h, load capacity: 4,500 kg, lifting height: 4,000 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 2,800 mm, motor manufacturer: KUBOTA, gearing type: hydrostat, fork carriage width: 3,100 mm, fork length: 1,300 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: superelastic tires (black), front tire size: 200/50-10, rear tire type: superelastic tires (black), rear tire size: 27X10-12, overall weight: 11,200 kg, empty load weight: 6,700 kg, total height: 2,400 mm, total length: 2,500 mm, total width: 2,600 mm, color: green, motor model: V2403-T, Equipment: CE marking, adjustable boom, all wheel drive, cabin, lighting, pallet forks, -- USED FORKLIFTS WITH QUALITY GUARANTEE – FT LOGISTICS -- 🛠️ Years of experience | 🎨 In-house service & paint shop | 📊 Professional consulting | 🚚 Own transport fleet | 🤝 After-sales support Are you looking for a reliable forklift? We are an established dealer of new and used forklifts with a longstanding reputation. We serve customers throughout Europe – from small businesses to large multinational industrial enterprises. Our forklifts are more than just machines – they are a guarantee that your logistics will operate seamlessly and reliably. ⭐ What makes us stand out? ✅ Every forklift undergoes a comprehensive technical overhaul (full servicing, inspection, replacement of filters and oils, refurbishment of key components) ✅ Full UDT inspection available upon customer request ✅ 🎨 In-house paint shop and service center – vehicles reconditioned both technically and visually ✅ 🚚 Europe-wide delivery using our own fleet with professional drivers ✅ 👨‍🏫 Operator training upon delivery + on-site functionality check at your location ✅ 🛡️ After-sales service and technical support – we continue to support you after the sale ✅ 🏭 View and test machines at our headquarters – arrange a visit! ✅ 🌍 Hundreds of satisfied customers throughout Europe – join our trusted partners ✅ 💶 Financing solutions available – we collaborate with leading leasing companies ✅ 📑 Invoices in EUR or PLN available – according to customer preference 🚜 CURRENTLY AVAILABLE: COMBILIFT C4500 – Multi-directional (4-way) forklift 📅 Year of manufacture: 2018 ⏱️ Operating hours: 4,311 h ⛽ Power source: Diesel 📦 Lifting capacity: 4,500 kg Hfodpsyzmq Sofx Agfef 📏 Mast: Duplex – 4,000 mm lift height 🔧 Wide fork positioner 3,100 mm | Forks 1,300 mm 🛞 Superelastic tyres – 100% condition 🟢 Technical state: Excellent – after complete servicing ✨ Visual state: Well-maintained, rust-free, ready for immediate use Dimensions: 📐 Truck height: 2,400 mm 📐 Overall length: 2,500 mm 📐 Width: 2,600 mm 📐 Fork positioner width: 3,100 mm 📐 Overall structure height: 2,800 mm 🏆 Ideal for: 📦 Warehouses with narrow aisles 🌲 Timber, steel, and pipe industries 📏 Long load handling 🏭 Indoor and outdoor operations

Condition: new, Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Mr. Simon Blank Technical data for pallet racking beam: Racking system: Mecalux Included in delivery: 01x Pallet racking beam, new Material color: RAL 2001 orange Suitable for frame: A103 Beam type: 2C-S 1115 Box profile: 110 x 50 mm Hfodpoh Dv Uqjfx Agfof Hook type: G.E. - 3 Clear span: 2,700 mm Weight per piece: approx. 15.026 kg Max. load capacity per pair of beams: 3,000 kg with evenly distributed load 02x Integrated locking pins, new For securing the beams against unintentional lifting General information about the article: This item is offered for collection only. Transport or shipment beyond this is subject to additional costs, which can be quoted separately depending on the delivery location and scope. Our range of services (prices on request): Assembly and installation Our general assembly terms and conditions apply Racking inspection Racking inspection according to DIN EN 15635, carried out in accordance with BGR 234 visual inspection requirements for all racking systems Delivery with our own vehicle fleet (unloading not included)

Condition: used, mileage: 491,328 km, power: 320 kW (435.08 HP), first registration: 03/2017, fuel type: diesel, empty load weight: 9,400 kg, maximum load weight: 6,600 kg, overall weight: 40,000 kg, tire size: 315 / 80 R 22.5 / 15mm, axle configuration: 4x2, wheelbase: 5,000 mm, next inspection (TÜV): 01/2025, gearing type: automatic, emission class: euro6, suspension: air, number of seats: 2, total length: 9,500 mm, total width: 25,500 mm, total height: 38,000 mm, front tire size: 315 / 80 R 22.5 / 15mm, operation weight: 16,000 kg, Equipment: air conditioning,

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, operating hours: 9,700 h, load capacity: 5,000 kg, lifting height: 8,300 mm, free lift: 2,500 mm, load center: 600 mm, fuel type: electric, mast type: triplex, construction height: 3,800 mm, gearing type: hydrostat, fork carriage width: 3,100 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: superelastic tires (black), front tire size: 16x7x10 1/2, rear tire type: superelastic tires (black), rear tire size: 27/10-12, overall weight: 12,500 kg, empty load weight: 7,500 kg, total height: 2,600 mm, total length: 2,500 mm, total width: 2,600 mm, color: green, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, seat heater, 🔍 Looking for a reliable forklift? We are industry specialists! 💼🚜 We specialize in selling high-quality forklifts, offering thoroughly inspected machines in excellent condition. ✅ Check out our offer and find the perfect equipment for your company! 📦 This listing features: COMBILIFT C5000E – TRIPLEX 8300mm – Year 2013 – 🔌 ELECTRIC – FULL FREE LIFT – FORK SIDESHIFT – WIDE POSITIONER – ✅ CONDITION 5/5 🔧 The forklift is in excellent technical condition, ready for immediate use. 📊 Key Features and Technical Specifications: 🆔 Model: COMBILIFT C5000E 📅 Year of Manufacture: 06/2013 🏋️ Lifting Capacity: 5000 kg 🏗️ Mast Type: Triplex 📏 Lifting Height: 8300 mm 🔌 Drive Type: Electric ⚙️ Load Center: 600 mm ⚖️ Total Weight: 7500 kg ⬆️ Free Lift Height: 2500 mm 🛞 Tyres: Solid, superelastic, good condition Hodpfx Asyzivqogfsff 🔘 Front Tyres: 16x7x10 1/2 – 100% TREAD 🔘 Rear Tyre: 27/10-12 – 100% TREAD 📐 Collapsed Mast Height: 3800 mm 🔍 Technical Condition: Fully functional, after service check 👀 Visual Condition: Very good 🔩 Fork Length: 1200 mm 📏 Overall Height: 2600 mm 📏 Overall Length: 2500 mm 📏 Overall Width: 2600 mm 📏 Positioner Width: 3100 mm 📞 Contact us today and let's move your business forward! 🚛📦

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 6,453 h, load capacity: 5,000 kg, lifting height: 4,000 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 3,000 mm, motor manufacturer: KUBOTA, gearing type: hydrostat, fork carriage width: 3,350 mm, fork length: 1,300 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: superelastic tires (black), front tire size: 23X10-12, rear tire type: superelastic tires (black), rear tire size: 355X50-15, overall weight: 12,450 kg, empty load weight: 7,450 kg, total height: 2,550 mm, total length: 2,700 mm, total width: 2,500 mm, color: green, motor model: V2403-T, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, 🚜 USED FORKLIFTS WITH QUALITY GUARANTEE – FT LOGISTICS 🔧 Years of Experience | In-house Service & Paint Shop 🎨 | Professional Advice 🧠 | Own Transport 🚛 | After-sales Support 🤝 Looking for a forklift you can truly rely on? We are a renowned dealer of new and used forklifts with a long-standing tradition. We serve clients all over Europe – from small businesses to large industrial operations. Our forklifts are more than just machines – they’re your guarantee of smooth and reliable logistics. ⭐ What Sets Us Apart? ✅ Every forklift undergoes a comprehensive technical overhaul (inspection, testing, oil & filter replacement, reconditioning of key components) ✅ UDT certification can be arranged upon customer request ✅ In-house paint shop and service workshop – machinery perfected both technically and visually ✅ Europe-wide transport using our own fleet and trained drivers ✅ Operator instruction on delivery + on-site performance test ✅ Post-sale service and technical support – we’re here for you after the purchase too ✅ Come and see or test our machines at our site – you’re always welcome! ✅ Hundreds of satisfied clients across Europe – join those who trust us ✅ Help with financing – we work with leading leasing companies ✅ Invoice in EUR or PLN – you choose 📦 AVAILABLE NOW: COMBILIFT C5000XL – Multi-Directional Forklift 🔹 Year: 2018 🔹 Operating hours: 6,453 h 🔹 Power: Diesel 🔹 Lifting capacity: 5,000 kg 🔹 Mast: Duplex – 4,000 mm 🔹 Wide fork positioner: 3,550 mm | Forks: 1,300 mm 🔹 Superelastic tires – 100% condition Hedpoyzitcofx Agfjff 🔹 Technical condition: Excellent – after full service 🔹 Visual condition: Clean, corrosion-free, ready for work 📏 Dimensions: • Lowered height: 2,550 mm • Total length: 2,500 mm • Width: 2,700 mm • Positioner width: 3,550 mm • Structure height: 3,000 mm 🏭 Ideal For: ✔️ Warehouses with narrow aisles ✔️ Wood, steel, and pipe industries ✔️ Handling long or oversized loads ✔️ Indoor and outdoor operations

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 3,942 h, load capacity: 4,000 kg, lifting height: 4,600 mm, free lift: 2,250 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 3,000 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 1,150 mm, fork length: 1,200 mm, fork width: 120 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 200/50-10, rear tire type: cushion tires (black), rear tire size: 27X10-12, overall weight: 10,150 kg, empty load weight: 6,150 kg, total height: 2,400 mm, total length: 2,400 mm, total width: 2,250 mm, color: yellow, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, 🇬🇧 USED FORKLIFTS WITH QUALITY GUARANTEE – FT LOGISTICS 🚜 COMBILIFT C4000 – DUPLEX 4600mm – Year 2019 – 3942 h – LPG / GAS – SIDE SHIFT – CONDITION 5/5 ⭐ Experience | Own service & paint shop | Professional consulting | Own transport | After-sales support 🔍 Looking for a forklift you can trust? We are a reputable European dealer of new & used forklifts. From small companies to major industrial plants – our forklifts mean reliability, safety, and smooth logistics. 💎 WHY CHOOSE US ✅ Full technical inspection – service, testing, oil & filter replacement, component regeneration 🧾 Full UDT inspection available 🎨 Own paint & service workshop – refined look & performance 🚚 Europe-wide transport by our trained drivers 🎓 Operator training & machine test at delivery 🛠️ After-sales support – we stay with you after purchase 👀 Machine viewing & testing available 🤝 Financing with leading leasing companies 💶 Invoice in EUR or PLN Hjdoyzir Ejpfx Agfjff 🏷️ IN OFFER COMBILIFT C4000 – Four-way / Multi-directional forklift 📆 Year: 2019 | ⏱️ Hours: 3942 | ⚙️ Drive: LPG / Gas | 💪 Capacity: 4000 kg 🎯 Mast: Duplex 4600 mm | 🔧 Forks: 1200 mm | Positioner: 1150 mm 🛞 Tyres: Superelastic – 100% condition ✨ Condition: Excellent – after full service, rust-free, ready to work 📏 Free lift: 2250 mm Dimensions: Height 2400 mm | Length 2400 mm | Width 2250 mm | Positioner width 1150 mm | Structural height 3000 mm 🏗️ PERFECT FOR: 🏠 Narrow aisles | 🪵 Wood, steel & pipe industry | 📦 Long loads | 🌦️ Indoor & outdoor FT LOGISTICS – Quality we stand by. Service you can trust. ⚙️💼