Used Welding Inverter for sale (7,134)

Year of construction: 2010, condition: ready for operation (used), An ultrasonic welding system with two Telsonic TSP-3000-1P, cabin, generators and documentation is available. Welding force: 2500N, table dimensions: 420x415mm, height adjustment: 250mm, stroke: 100mm, control: Siemens SIMATIC PANEL, length: 762mm, width: 854mm, height: 1316mm, weight: 130kg. On-site inspection is possible. Fsdeuy T Ndopfx Ac Nofu

Year of construction: 2021, condition: ready for operation (used), Robot travel path: 5000mm, arm length: 2500mm, lift: 1000mm, spin radius: 2200mm, L-manipulator load capacity: 2000kg, lift velocity: 0,85m/min, swing speed: 1,7/min, turn speed: 6/min. Roboter type: IGM RTE 497-S in hanging position, control: full digital PC-Robotcontrol, Type RCE, software: WIN 10 & Linux based System + igm Robotsoftware K6, welding process: 135 (GMAW), single-wire, Ø1,2mm, welding power source: digital Invert Welding Power Source TPS 500i (500A at 40% duty cycle), robot periphery: rotating boom for floor installation with 2,5m boom length, number of working stations: 1, working station: 3-axis L-Manipulator with lifting device with 2t nominal load capacity, security Technology: Pistol-Security-Shut-down in wrist axis, emergency Stop on Handtablet, on Manipulators and Control Panel, three-coloured warning light for the operating Status partition, security Door. machine is complete, no defects known, documentation complete, was maintained regularly. An on-site inspection is possible. Ffsdpfx Ajwc A Rdec Nou

Year of construction: 2011, condition: ready for operation (used), Eine Strecker Widerstandsstumpfschweißmaschine mit integrierter hydraulischer Presseinheit ist verfügbar. Nennleistung bei 50%: 120kVA, Nennstrom: 300A, Betriebsdruck: 350bar, max. Spannkraft: 69kN, max: 44kN, Hydraulikaggregat: K-VDS-700, Schneidleistung: 32mm, Kolbenpresskraft: 44t, schwenkbar: möglich. Maschinenabmessungen X/Y/Z: ca. 1800mm/1100mm/1600mm, Gewicht: ca. 2300kg, Steuerung: VIPA S7. Dokumentation vorhanden. Besichtigung vor Ort ist möglich. Fsdpfx Acowfg Edj Njfu

Year of construction: 2002, condition: ready for operation (used), A medium-frequency spot welding machine Dalex-Werke is available. Throat depth: 350mm, electrode stroke: 90mm, electrode holder diameter: 30mm, electrode taper: MK2, rated power at 20% duty cycle: 180kVA, max. welding power: 200kVA, primary voltage: 400V, rated frequency: 1000Hz, electrode force: 20daN–600daN. Weight: approx. 575kg, control: HWS 2102. Documentation available. An on-site inspection is possible. Fsdpew H Sc Ajfx Ac Nofu

Year of construction: 2012, condition: ready for operation (used), A Dalex welding press/projection welding machine including Sortimat (ATS) feeding unit is available. Rated power at 50% duty cycle: 100kVA, max. welding power: 455kVA, open-circuit voltage: 8.88V, max. short-circuit current: 67kA, cooling water flow rate: 10l/min, electrode force min./max.: 120daN/720daN, single-stroke cylinder: 100mm, machine throat depth: 250mm, stop range: 148mm-400mm, belt diameter: 260mm. Weight: approx. 850kg, control system: MPS 200 multi R1. Including sorting and feeding unit, flow monitor, adjustment device and return stroke monitoring. Documentation available. An on-site inspection is possible. Fedpfx Acoxr Nwaj Nefu

Condition: ready for operation (used), A total of 18 welding machines are available. 1-9) Welding machine ESS MIG-MAG 311, functional: 3, defective: 2, unclear: 4. Including wire feeder DVK-13 and partly hose package. 10) Welding machine Migatronic MTE 320. Including wire feeder CTU 3000. The hose package is defective. 11) Welding machine Merkle W420 AC/DC TIG Insquare, welding process: TIG, material: aluminum. 12) Welding machine EWM MIG 450 puls. Including wire feeder. 13) Welding machine WIG L-TEC TIG 404 AC/DC. 14) Welding machine Cloos GLC 450 N. Including wire feeder and hose package. 15) Welding machine Oerlikon CPGL 454. Including wire feeder VCW 454 and hose package. 16) Welding machine Stel HI-MIG 500P. Including hose package. 17) Plasma cutting machine Plasma 125. Including hose package. 18) Welding machine Merkle MIG/MAG M 325 DW. Including wire feeder DV30. Documentation available. An on-site inspection is possible. Fedpfxexhntxe Ac Nsfu

Year of construction: 1993, condition: ready for operation (used), A lattice-girder/girder welding system year 1993 is offered. Girder types: KT 8, girder height: 90mm-250mm. Upper chord: 5mm-12mm smooth/ribbed. Diagonal: 4mm-7mm smooth. Lower chord: 4mm-10mm smooth/ribbed. Maximum girder length: 14000mm, cutting grid: 100mm/200mm. Coil run-off tables: 5 units, maximum stacker stacking height: 500mm. Documentation available, inspection possible by arrangement. Ffodpfx Aexz Ewhec Nju

Year of construction: 1992, condition: ready for operation (used), Offered is a lattice girder/girder welding system year 1992 incl. corresponding stacker SVH 195 year 1992. Girder height: 90mm-250mm, upper chord: 5mm-12mm smooth/ribbed, diagonal: 4mm-7mm smooth, lower chord: 4mm-10mm smooth/ribbed, girder length max.: 14000mm, fixed lengths, cutting grid: 100mm/200mm. 5 coil payoff plates, stacker SVH 195, stacking height max.: 500mm. Inspection is possible by arrangement. Fjdpsxz Ev Refx Ac Nefu

Year of construction: 1994, condition: ready for operation (used), Offered is a lattice girder/girder production machine year approx.: 1994. Girder height: 80mm-300mm, upper chord: 5mm smooth/ribbed, diagonal: 7mm smooth, lower chord: 5mm smooth/ribbed, girder length max.: 14000mm, cutting grid: 200mm, spool payoff tables: 5 pieces. Inspection is possible by arrangement. Ffjdpfx Acoxz Ewbs Nou

Year of construction: 2013, condition: ready for operation (used), A Rehm Invertig Pro 350 AC DC and a Rehm Invertig Pro 450 DC are available, used and in good condition. 1) Invertig Pro 350 AC DC, standards: IEC 60 974-1 IEC 60 974-2, welding current range TIG: 3-350A, output voltage U₂ at maximum current: approx. 24V, open circuit voltage U₀: approx. 91V, duty cycle 100 percent for TIG at 350A, mains voltage input: three phase 400V 50Hz, protection class: IP23S, protection category: S, setting range: 3-350A for TIG in this AC DC version, duty cycle 100 percent at 40°C 350A for TIG 100 percent duty cycle, input fuse protection: 32A at 3x400V for the 350 AC DC version, length: 520mm, width: 360mm, height: 460mm, weight: 29.5kg for AC DC version. 2) Invertig Pro 450 DC, standard: IEC 60 974-1, welding current range TIG: 3-450A, output voltage U₂ at maximum current: approx. 28V, open circuit voltage U₀: approx. 91V, duty cycle 100 percent at 450A TIG, lower for electrode welding approx. 60 percent, mains input: 3x400V 50Hz, protection class: IP23S, duty cycle at 100 percent 450A TIG at 40°C, electrode welding current approx. 360A at 100 percent duty cycle for electrode in the 450 DC version, input fuse protection: 32A at 400V three phase for 450 versions, length: 520mm, width: 360mm, height: 460mm, weight: approx. 28kg. An on-site inspection is possible. Ffodpfjxddamex Ac Nou

Condition: ready for operation (used), Year of construction: 2020, An unused collaborative welding robot (cobot) Universal Robots with a Migatronic welding power source is available. 1) Cobot Universal Robots UR10, year of manufacture: 2020, load capacity: 10kg, reach: 1300mm, machine dimensions X/Y/Z: approx. 1600mm/600mm/600mm, weight: approx. 30kg, operating hours: 0h. 2) Arc welding power source Migatronic, year of manufacture: 2020. Documentation available. An on-site inspection is possible. Ffsdsxddayspfx Ac Nou

Year of construction: 2018, condition: ready for operation (used), Three almost identical CNC plastic pipe butt welding machines (mirror welding machines) Hürner are available. Years of construction: 2x 2016 and 1x 2018, working range OD: 40mm-160mm, power: 2.85kW, reduction inserts: 40/50/63/75/90/110/125/140, weight: approx. 80kg. Documentation available. On-site inspection is possible. Fjdpfjviv Azjx Ac Nsfu

Year of construction: 2007, condition: ready for operation (used), A Willems welding machine for plastics is available. Tables: 2, welding area: 500mm/400mm, pressing force: 20kN, frequency: 27.12MHz, generator output: 10kW, overhauled in 2007, documentation available. On-site inspection is possible. Ffsdpfewal H Njx Ac Nou

Year of construction: 2009, condition: ready for operation (used), A fully automatic lattice girder welding system for the production of reinforcing steel (rebar) is available. Outlet height: 1400mm, beam length min./max.: 800mm/16000mm, base width: 58mm, beam width range: 70mm-116mm, max. production capacity: 15m/min. Beam type KT: upper beam diameter range: 5mm-16mm, lower beam diameter range: 5mm-16mm, diagonal beam diameter range: 4.5mm-9mm, beam height range: 70mm-400mm, diagonal pitch: 190mm-210mm. Beam type KTS: top chord diameter range: 5mm-7mm, bottom chord diameter range: 5mm-7mm, diagonal beam diameter range: 5mm-7mm, beam height range: 80mm-310mm, diagonal spacing: 200mm. Documentation available. On-site inspection is possible. Ffedewfg Ekspfx Ac Nsu

Year of construction: 2001, condition: ready for operation (used), A steel mesh welding system for the automatic production of welded steel wire mesh is available. Mesh width range with a bar diameter of 3mm to 6mm: 500mm-2150mm, mesh width range with a bar diameter of 2mm to 3mm: 500mm-2000mm. Grid length range with a rod diameter of 3mm to 6mm: 600mm-3000mm, grid length range with a rod diameter of 2mm to 3mm: 600mm-2000mm. Min. cross wire pitch: 12.5mm, min. longitudinal wire pitch: 25mm, wire diameter range: 2mm-6mm, max. number of longitudinal wires: 52, production capacity: 52 strokes/min, rated power at 50%: 840kVA, max. stack height: 600mm. Total system dimensions X/Y/Z: approx. 20000mm/7600mm/3400mm. Including longitudinal wire distributor in 40mm and 50mm pitch and longitudinal wire console in 40mm, 50mm and 75mm pitch. Documentation available. On-site inspection is possible. Fedpfswfg Eqsx Ac Nsfu

Condition: new, Year of construction: 2025, operating hours: 10 h, functionality: fully functional, Fiber laser welding machine with 2000-watt laser power 4-in-1 device Welding with automatic wire feed Welding without wire Cleaning Cutting - Top device at a top price from our showroom - approx. 10 operating hours - 2kW laser source by MaxPhotonik - German-language menu navigation - Universal device for welding / cutting / cleaning - incl. 4-roller welding wire feeder - integrated water cooling - immediately available Also take advantage of our attractive leasing/financing offers. Approx. machine dimensions: Width: 60cm Fjdpfjug Unfsx Ac Njfu Height: 120cm Depth: 110cm Weight: approx. 150kg

Condition: new, Year of construction: 2024, Laser welding machine with 200-watt laser output - Lamp-pumped Ffedsflrniepfx Ac Nsu - Spot welding machine for extremely fine welding applications - Suitable for jewelry, optics, precision engineering, etc. - Welding spot size from 0.1 to 3mm - For virtually all metals (steel, stainless steel, silver, gold, titanium, etc.) - Includes optical microscope (10x) - Additional CCD microscope with crosshair - Adjustable current, pulse width, repetition rate, and frequency via control panel - Includes shielding gas connection - Nd3+:YAG laser (metal cavity with xenon flash lamp) - Lamp-pumped Nd:YAG laser with 200-watt output - External cooling - Power supply: 230V / 32A Please also note our attractive leasing and hire-purchase offers. Machine dimensions approx.: Width: 60 cm Height: 120 cm Depth: 110 cm Weight: approx. 150 kg

Year of construction: 2020, condition: ready for operation (used), functionality: fully functional, empty load weight: 1,550 kg, borehole diameter: 28 mm, workpiece weight (max.): 10 kg, table length: 2,000 mm, table width: 1,200 mm, TECHNICAL DETAILS Bore diameter: 28 mm MIG/MAG adjustment range: 20 - 500 A Wire feed speed: 0 - 22 m/min Welding table: 2000 x 1200 mm Number of controlled axes: 6 Workpiece weight: 10 kg Fodeygw Nbjpfx Ac Nsfu MACHINE DETAILS Power capacity: 25 kVA Duty cycle at max. current (40°C): 50 % Current at 100% duty cycle (40°C): 410 A Machine weight: 1,550 kg EQUIPMENT Easy ARC 01.02 FD-B6 Welbee P500L welding robot station Torch RTW5000H Welding robot type FD-B6 Steplessly adjustable control switches

Condition: excellent (used), Pneumatically operated, water-cooled spot welding gun Hand-operated control valve Manufacturer: DALEX Type: 3238 Rated power at 50% duty cycle: 16 kVA Secondary short-circuit current: 13.5 kA Fjdoyh Rf Njpfx Ac Nefu Electrode force: 270 daN Arm spacing: 130 mm Arm reach: 170 mm Equipped with double-stroke cylinder: long stroke 75 mm, pre-stroke 50 mm, working stroke with adjustable range 0-25 mm Cardan suspension and suspension bracket 10 m connection cable Including separate synchronous welding controller 1/01 TT

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, type of input current: AC, pressure: 7 bar, Complete system consisting of 3 units of AKS 6400 4-head welding machines and 2 units of AKS 6600 4-head welding machines plus 2 units of SV 800/4 CNC weld seam finishing machines, including chip extraction system. Fjdpfsw Etv Aox Ac Nefu

Condition: used, functionality: fully functional, overall weight: 140 kg, total length: 3,300 mm, total width: 1,320 mm, machine/vehicle number: 0027, Welding jig for railing construction Insert bars, adjust shear, weld: With the patented Crea-Star welding jig, you can fabricate railings in half the time. - Mobile with castors - Additionally extended supports Fedpfx Ajyh Nhvoc Nofu - Includes Excel calculation program - Cover tarp is also included

Condition: excellent (used), Lorch Schweißtechnik GmbH Robot/Cobot Welding System, Model S5 RoboMIG XT incl. welding table. This is a high-performance MIG/MAG power source for automated welding, featuring excellent arc stability and state-of-the-art processor technology—for use with steel, stainless steel, and aluminum in series production and robotic applications. Despite enduring continuous industrial operation, the system works precisely, consistently, and reliably. Technical data: Type of machine: MIG/MAG Robot Welding System / Power Source Manufacturer: Lorch Model: S5 RoboMIG XT Welding range: 25 – 400 A Current at 100% duty cycle: 320 A Current at 60% duty cycle: 350 A Duty cycle at max I: 50% Duty cycle rated at 40°C Weldable wires (pulse): 0.6 – 1.6 mm diameter Mains voltage: 3~ 400 V Ffsdpfx Aeyh Ncmsc Neu Mains fuse (slow-blow): 32 A Comprehensive process configuration: - Special cobot interface - Water cooling system with increased cooling capacity (1.5 kW) - Lorch Cobot Welding Torch LMR 450 W, 3.5 m cable - Initial set of wear parts for steel & stainless steel - Basket spool adapter - Boom arm - Hose package management - Foot pedal - Function button with emergency stop - Mounting plate - Earth cable 70 mm² - CE certification as per DIN EN 12100 Key features: - Excellent arc control and reproducible welding results - Latest processor technology ensures stable parameter management - High performance for steel, stainless steel, and aluminum - Ideal for cobot/robot integration - Robust, durable construction for continuous operation - EN1090 WPS documentation folder → reduced inspection and documentation costs Condition: Used, but in perfect condition Technically inspected, fully functional, ready for immediate use UVV (accident prevention inspection) can be renewed upon request Delivery time: Immediate Shipping terms: ex works, free loading Loading: possible by forklift Transport/shipping: Can be organized cost-effectively

Condition: new, Jackson Translight 555+ Welding Helmet ADF Welding Helmet with ADF black TECHNICAL DATA Viewing area: 98 x 82 mm Optical clarity: 1/1/1/1 True Color: yes Weight: 612 g Protection level open: 3 Protection level closed: 5-8/9-14 Control: Digital Step adjustment: yes / internal Sensitivity adjustment: yes / internal Delay adjustment: yes / internal Grinding mode: yes / external Switching time: 0.2 ms Power supply: Solar cells & lithium (CR2032) batteries Fedpfx Aceyh H Ado Njfu

Condition: excellent (used), Pneumatically operated, parallel-guided spot welding machine Brand: DALEX Type: PMS 10-4 Throat Depth: 550 mm with double-stroke cylinder and approach stroke Rated power at 50% duty cycle: 50 kVA Secondary short-circuit current: 24 kA Secondary open-circuit voltage: 5 V Electrode force: 65-390 daN Weight: 425 kg with mounted control cabinet according to VDE 0100 Fsdpfoyh Hlxex Ac Nefu Main switch Synchronous welding control 8033 Sample photo Machine is currently being refurbished.

Condition: excellent (used), Pneumatically operated, water-cooled spot welding tongs Make: DALEX Model: 3326-3 with 5/2-way solenoid valve Double stroke cylinder – long stroke 60 mm, pre-stroke 40 mm, working stroke adjustable from 0–20 mm Rated output at 50% duty cycle: 22 kVA Secondary short-circuit current: 14 kA Secondary open-circuit voltage: 3.8 V Electrode force: 280 daN With cardan suspension and suspension bracket 10 m connection cable and control line Arm reach: 350 mm Including: Ffsdpfx Asyh Hi Doc Nou Remote welding controller type 1033